summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/genet/bcmgenet.h
AgeCommit message (Collapse)Author
2025-05-20net: bcmgenet: expose more stats in ethtoolZak Kemble
Expose more per-queue and overall stats in ethtool Signed-off-by: Zak Kemble <zakkemble@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250519113257.1031-4-zakkemble@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: bcmgenet: count hw discarded packets in missed statZak Kemble
Hardware discarded packets are now counted in their own missed stat instead of being lumped in with general errors. Signed-off-by: Zak Kemble <zakkemble@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250519113257.1031-3-zakkemble@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: bcmgenet: switch to use 64bit statisticsZak Kemble
Update the driver to use ndo_get_stats64, rtnl_link_stats64 and u64_stats_t counters for statistics. Signed-off-by: Zak Kemble <zakkemble@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250519113257.1031-2-zakkemble@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: bcmgenet: revise suspend/resumeDoug Berger
If the network interface is configured for Wake-on-LAN we should avoid bringing the interface down and up since it slows the time to reestablish network traffic on resume. Redundant calls to phy_suspend() and phy_resume() are removed since they are already invoked from within phy_stop() and phy_start() called from bcmgenet_netif_stop() and bcmgenet_netif_start(). Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250306192643.2383632-15-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: bcmgenet: allow return of power up statusDoug Berger
It is possible for a WoL power up to fail due to the GENET being reset while in the suspend state. Allow these failures to be returned as error codes to allow different recovery behavior when necessary. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250306192643.2383632-14-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: bcmgenet: move bcmgenet_power_up into resume_noirqDoug Berger
The bcmgenet_power_up() function is moved from the resume method to the resume_noirq method for symmetry with the suspend_noirq method. This allows the wol_active flag to be removed. The UMAC_IRQ_WAKE_EVENT interrupts that can be unmasked by the bcmgenet_wol_power_down_cfg() function are now re-masked by the bcmgenet_wol_power_up_cfg() function at the resume_noirq level as well. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250306192643.2383632-13-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: bcmgenet: move DESC_INDEX flow to ring 0Doug Berger
The default transmit and receive packet handling is moved from the DESC_INDEX (i.e. 16) descriptor rings to the Ring 0 queues. This saves a fair amount of special case code by unifying the handling. A default dummy filter is enabled in the Hardware Filter Block to route default receive packets to Ring 0. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250306192643.2383632-7-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: bcmgenet: move feature flags to bcmgenet_privDoug Berger
The feature flags are moved and consolidated to the primary private driver structure and are now initialized from the platform device data rather than the hardware parameters to allow finer control over which platforms use which features. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250306192643.2383632-4-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: bcmgenet: add bcmgenet_has_* helpersDoug Berger
Introduce helper functions to indicate whether the driver should make use of a particular feature that it supports. These helpers abstract the implementation of how the feature availability is encoded. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250306192643.2383632-3-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: bcmgenet: bcmgenet_hw_params clean upDoug Berger
The entries of the bcmgenet_hw_params array are broken out to remove unused and duplicate entries and are made read only since they should not change for a specific version of the GENET hardware. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250306192643.2383632-2-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-29net: bcmgenet: synchronize UMAC_CMD accessDoug Berger
The UMAC_CMD register is written from different execution contexts and has insufficient synchronization protections to prevent possible corruption. Of particular concern are the acceses from the phy_device delayed work context used by the adjust_link call and the BH context that may be used by the ndo_set_rx_mode call. A spinlock is added to the driver to protect contended register accesses (i.e. reg_lock) and it is used to synchronize accesses to UMAC_CMD. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-07net: bcmgenet: Fix EEE implementationFlorian Fainelli
We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-24net: bcmgenet: Add support for 7712 16nm internal EPHYFlorian Fainelli
The 16nm internal EPHY that is present in 7712 is actually a 16nm Gigabit PHY which has been forced to operate in 10/100 mode. Its controls are therefore via the EXT_GPHY_CTRL registers and not via the EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on the 7712 compatible string to allow that differentiation to happen. On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by default, but this is not the case with this chip, so we need to make sure we clear it to power on the EPHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bcmgenet: add support for ethtool flow controlDoug Berger
This commit extends the supported ethtool operations to allow MAC level flow control to be configured for the bcmgenet driver. The ethtool utility can be used to change the configuration of auto-negotiated symmetric and asymmetric modes as well as manually configuring support for RX and TX Pause frames individually. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bcmgenet: remove old link state valuesDoug Berger
The PHY state machine has been fixed to only call the adjust_link callback when the link state has changed. Therefore the old link state variables are no longer needed to detect a change in link state. This commit effectively reverts commit 5ad6e6c50899 ("net: bcmgenet: improve bcmgenet_mii_setup()") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-08net: broadcom: share header defining UniMAC registersRafał Miłecki
UniMAC is integrated into multiple Broadcom's Ethernet controllers so use a shared header file for it and avoid some code duplication. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Link: https://lore.kernel.org/r/20210107180051.1542-2-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-17net: bcmgenet: restore HFB filters on resumeDoug Berger
The Hardware Filter Block RAM may not be preserved when the GENET block is reset during a deep sleep, so it is not sufficient to only backup and restore the enables. This commit clears out the HFB block and reprograms the rxnfc rules when the system resumes from a suspended state. To support this the bcmgenet_hfb_create_rxnfc_filter() function is modified to access the register space directly so that it can't fail due to memory allocation issues. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: bcmgenet: Move wake-up event out of side band ISRDoug Berger
The side band interrupt service routine is not available on chips like 7211, or rather, it does not permit the signaling of wake-up events due to the complex interrupt hierarchy. Move the wake-up event accounting into a .resume_noirq function, account for possible wake-up events and clear the MPD/HFB interrupts from there, while leaving the hardware untouched until the resume function proceeds with doing its usual business. Because bcmgenet_wol_power_down_cfg() now enables the MPD and HFB interrupts, it is invoked by a .suspend_noirq function to prevent the servicing of interrupts after the clocks have been disabled. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29net: bcmgenet: add support for ethtool rxnfc flowsDoug Berger
This commit enables driver support for ethtool commands of this form: ethtool -N|-U|--config-nfc|--config-ntuple devname flow-type ether|ip4 [src xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [dst xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [proto N [m N]] [src-ip x.x.x.x [m x.x.x.x]] [dst-ip x.x.x.x [m x.x.x.x]] [tos N [m N]] [l4proto N [m N]] [src-port N [m N]] [dst-port N [m N]] [spi N [m N]] [l4data N [m N]] [vlan-etype N [m N]] [vlan N [m N]] [dst-mac xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [action 0] [loc N] | delete N Since there is only one Rx Ring in this implementation action 0 behaves no differently from not specifying a rule. The rules can be seen with ethtool commands of this form: ethtool -n|-u|--show-nfc|--show-ntuple devname [rule N] Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29net: bcmgenet: move clk_wol management to bcmgenet_wolDoug Berger
The GENET_POWER_WOL_MAGIC power up and power down code configures the device for WoL when suspending and disables the WoL logic when resuming. It makes sense that this code should also manage the WoL clocking. This commit consolidates the logic and moves it earlier in the resume sequence. Since the clock is now only enabled if WoL is successfully entered the wol_active flag is introduced to track that state to keep the clock enables and disables balanced in case a suspend is aborted. The MPD_EN hardware bit can't be used because it can be cleared when the MAC is reset by a deep sleep. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29net: bcmgenet: Fix WoL with password after deep sleepDoug Berger
Broadcom STB chips support a deep sleep mode where all register contents are lost. Because we were stashing the MagicPacket password into some of these registers a suspend into that deep sleep then a resumption would not lead to being able to wake-up from MagicPacket with password again. Fix this by keeping a software copy of the password and program it during suspend. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net: bcmgenet: always enable status blocksDoug Berger
The hardware offloading of the NETIF_F_HW_CSUM and NETIF_F_RXCSUM features requires the use of Transmit Status Blocks before transmit frame data and Receive Status Blocks before receive frame data to carry the checksum information. Unfortunately, these status blocks are currently only enabled when the NETIF_F_HW_CSUM feature is enabled. As a result NETIF_F_RXCSUM will not actually be offloaded to the hardware unless both it and NETIF_F_HW_CSUM are enabled. Fortunately, that is the default configuration. This commit addresses this issue by always enabling the use of status blocks on both transmit and receive frames. Further, it replaces the use of a dedicated flag within the driver private data structure with direct use of the netdev features flags. Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: bcmgenet: Add software counters to track reallocationsDoug Berger
When inserting the TSB, keep track of how many times we had to do it and if there was a failure in doing so, this helps profile the driver for possibly incorrect headroom settings. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUMDoug Berger
This commit updates the Rx checksum offload behavior of the driver to use the more generic CHECKSUM_COMPLETE method that supports all protocols over the CHECKSUM_UNNECESSARY method that only applies to some protocols known by the hardware. This behavior is perceived to be superior. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Add BCM2711 supportStefan Wahren
The BCM2711 needs a different maximum DMA burst length. If not set accordingly a timeout in the transmit queue happens and no package can be sent. So use the new compatible to derive this value. Until now the GENET HW version was used as the platform identifier. This doesn't work with SoC-specific modifications, so introduce a proper platform data structure. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06Revert "net: bcmgenet: soft reset 40nm EPHYs before MAC init"Doug Berger
This reverts commit 1f515486275a08a17a2c806b844cca18f7de5b34. This commit improved the chances of the umac resetting cleanly by ensuring that the PHY was restored to its normal operation prior to resetting the umac. However, there were still cases when the PHY might not be driving a Tx clock to the umac during this window (e.g. when the PHY detects no link). The previous commit now ensures that the unimac receives clocks from the MAC during its reset window so this commit is no longer needed. This commit also has an unintended negative impact on the MDIO performance of the UniMAC MDIO interface because it is used before the MDIO interrupts are reenabled, so it should be removed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18net: bcmgenet: soft reset 40nm EPHYs before MAC initDoug Berger
It turns out that the "Workaround for putting the PHY in IDDQ mode" used by the internal EPHYs on 40nm Set-Top Box chips when powering down puts the interface to the GENET MAC in a state that can cause subsequent MAC resets to be incomplete. Rather than restore the forced soft reset when powering up internal PHYs, this commit moves the invocation of phy_init_hw earlier in the MAC initialization sequence to just before the MAC reset in the open and resume functions. This allows the interface to be stable and allows the MAC resets to be successful. The bcmgenet_mii_probe() function is split in two to accommodate this. The new function bcmgenet_mii_connect() handles the first half of the functionality before the MAC initialization, and the bcmgenet_mii_config() function is extended to provide the remaining PHY configuration following the MAC initialization. Fixes: 484bfa1507bf ("Revert "net: bcmgenet: Software reset EPHY after power on"") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3Florian Fainelli
The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference. Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27Merge tag 'blk-dim-v2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mamameed says: ==================== Generic DIM From: Tal Gilboa and Yamin Fridman Implement net DIM over a generic DIM library, add RDMA DIM dim.h lib exposes an implementation of the DIM algorithm for dynamically-tuned interrupt moderation for networking interfaces. We want a similar functionality for other protocols, which might need to optimize interrupts differently. Main motivation here is DIM for NVMf storage protocol. Current DIM implementation prioritizes reducing interrupt overhead over latency. Also, in order to reduce DIM's own overhead, the algorithm might take some time to identify it needs to change profiles. While this is acceptable for networking, it might not work well on other scenarios. Here we propose a new structure to DIM. The idea is to allow a slightly modified functionality without the risk of breaking Net DIM behavior for netdev. We verified there are no degradations in current DIM behavior with the modified solution. Suggested solution: - Common logic is implemented in lib/dim/dim.c - Net DIM (existing) logic is implemented in lib/dim/net_dim.c, which uses the common logic in dim.c - Any new DIM logic will be implemented in "lib/dim/new_dim.c". This new implementation will expose modified versions of profiles, dim_step() and dim_decision(). - DIM API is declared in include/linux/dim.h for all implementations. Pros for this solution are: - Zero impact on existing net_dim implementation and usage - Relatively more code reuse (compared to two separate solutions) - Increased extensibility ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-25linux/dim: Move implementation to .c filesTal Gilboa
Moved all logic from dim.h and net_dim.h to dim.c and net_dim.c. This is both more structurally appealing and would allow to only expose externally used functions. Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-25linux/dim: Rename externally used net_dim membersTal Gilboa
Removed 'net' prefix from functions and structs used by external drivers. Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-29net: bcmgenet: use MAC link status for fixed phyDoug Berger
When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6ebb34c ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: bcmgenet: Fix coalescing settings handlingFlorian Fainelli
There were a number of issues with setting the RX coalescing parameters: - we would not be preserving values that would have been configured across close/open calls, instead we would always reset to no timeout and 1 interrupt per packet, this would also prevent DIM from setting its default usec/pkts values - when adaptive RX would be turned on, we woud not be fetching the default parameters, we would stay with no timeout/1 packet per interrupt until the estimator kicks in and changes that - finally disabling adaptive RX coalescing while providing parameters would not be honored, and we would stay with whatever DIM had previously determined instead of the user requested parameters Fixes: 9f4ca05827a2 ("net: bcmgenet: Add support for adaptive RX coalescing") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25net: bcmgenet: Add support for adaptive RX coalescingFlorian Fainelli
Unlike the moder modern SYSTEMPORT hardware, we do not have a configurable TDMA timeout, which limits us to implement adaptive RX interrupt coalescing only. We have each of our RX rings implement a bcmgenet_net_dim structure which holds an interrupt counter, number of packets, bytes, and a container for a net_dim instance. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26net: bcmgenet: use dev->phydev instead of priv->phydevDoug Berger
Now that the software reset of the PHY has been removed it is no longer necessary to retain a private pointer to the phydev for use when the PHY is detached (which isn't generally safe anyway). The driver now uses the phydev member attached to the net_device. For ethtool commands that have a PHY component, an explicit check is made to prevent accessing an invalid phydev pointer when one is not attached (e.g. interface is down). Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26Revert "net: bcmgenet: Software reset EPHY after power on"Doug Berger
With commit f7d72996e222 ("net: bcmgenet: enable loopback during UniMAC sw_reset") it is no longer necessary to force the software reset of the internal EPHY before resetting the UniMAC to ensure a clean reset. Therefore this commit reverts commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on"). Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29net: bcmgenet: Do not return from void functionFlorian Fainelli
A stray return was added in the macro bcmgenet_##name##_writel where it should not, drop it. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 69d2ea9c7989 ("net: bcmgenet: Use correct I/O accessors") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29net: bcmgenet: Use correct I/O accessorsFlorian Fainelli
The GENET driver currently uses __raw_{read,write}l which means native I/O endian. This works correctly for an ARM LE kernel (default) but fails miserably on an ARM BE (BE8) kernel where registers are kept little endian, so replace uses with {read,write}l_relaxed here which is what we want because this is all performance sensitive code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"Florian Fainelli
This reverts commit 28b45910ccda ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config") because in the process of moving from dev_info() to dev_info_once() we essentially lost the helpful printed messages once the second instance of the driver is loaded. dev_info_once() does not actually print the message once per device instance, but once period. Fixes: 28b45910ccda ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driverFlorian Fainelli
Update the GENET driver to register an UniMAC MDIO bus controller for the GENET internal MDIO bus, update the platform data code to attach the PHY to the correct MDIO bus controller. The Device Tree portion of the code is mostly left unmodified since the lookup/binding is done via phandles and Device Tree nodes which are much more flexible in locating and binding PHYs to their respective MDIO bus controllers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-15net: bcmgenet: Free skb after last Tx fragDoug Berger
Since the skb is attached to the first control block of a fragmented skb it is possible that the skb could be freed when reclaiming that control block before all fragments of the skb have been consumed by the hardware and unmapped. This commit introduces first_cb and last_cb pointers to the skb control block used by the driver to keep track of which transmit control blocks within a transmit ring are the first and last ones associated with the skb. It then splits the bcmgenet_free_cb() function into transmit (bcmgenet_free_tx_cb) and receive (bcmgenet_free_rx_cb) versions that can handle the unmapping of dma mapped memory and cleaning up the corresponding control block structure so that the skb is only freed after the last associated transmit control block is reclaimed. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: bcmgenet: Track per TX/RX rings statisticsFlorian Fainelli
__bcmgenet_tx_reclaim() is currently summing TX bytes/packets in a way that is not SMP friendly, mutliples CPUs could run __bcmgenet_tx_reclaim() independently and still update stats->tx_bytes and stats->tx_packets, cloberring the other CPUs statistics. Fix this by tracking per RX and TX rings the number of bytes, packets, dropped and errors statistics, and provide a bcmgenet_get_stats() function which aggregates everything and returns a consistent output. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/genet/bcmgenet.c net/core/sock.c Conflicts were overlapping changes in bcmgenet and the lockdep handling of sockets. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: add support for the GENETv5 hardwareDoug Berger
This commit adds support for the GENETv5 implementation. The GENETv5 reports a major version of 6 instead of 5 so compensate for this when verifying the configuration of the driver. Also the EPHY revision is now contained in the MDIO registers of the PHY so the EPHY revision of 0 in GENET_VER_FMT is expected for GENETv5. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: bcmgenet: synchronize irq0 status between the isr and taskDoug Berger
Add a spinlock to ensure that irq0_stat is not unintentionally altered as the result of preemption. Also removed unserviced irq0 interrupts and removed irq1_stat since there is no bottom half service for those interrupts. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB valuesDoug Berger
The location of the RBUF overflow and error counters has moved between different version of the GENET MAC. This commit corrects the driver to read from the correct locations depending on the version of the GENET MAC. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Revert "net: ethernet: bcmgenet: use phydev from struct net_device"Florian Fainelli
This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76007e we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76007e, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 22:15:05 +0000