summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
AgeCommit message (Collapse)Author
9 daysnet: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15bnxt: move bnxt_hsi.h to include/linux/bnxt/hsi.hAndy Gospodarek
This moves bnxt_hsi.h contents to a common location so it can be properly referenced by bnxt_en, bnxt_re, and bnge. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250714170202.39688-1-gospo@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Improve comment wording and error return codeAlok Tiwari
Improved wording and grammar in several comments for clarity. "the must belongs" -> "it must belong" "mininum" -> "minimum" "fileds" -> "fields" Replaced return -1 with -EINVAL in hwrm_ring_alloc_send_msg() to return a proper error code. These changes enhance code readability and consistent error handling. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250615154051.1365631-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-06eth: bnxt: remove most dependencies on RTNLStanislav Fomichev
Only devlink and sriov paths are grabbing rtnl explicitly. The rest is covered by netdev instance lock which the core now grabs, so there is no need to manage rtnl in most places anymore. On the core side we can now try to drop rtnl in some places (do_setlink for example) for the drivers that signal non-rtnl mode (TBD). Boot-tested and with `ethtool -L eth1 combined 24` to trigger reset. Cc: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-15-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12bnxt_en: Add support for RoCE sriov configurationVikas Gupta
During driver load, PF RDMA driver provisions resources to the RDMA VFs. This logic takes into consideration of the total number of VFs supported on the PF while allocating resources. Firmware now advertises a capability where NIC driver can allocate resources for RDMA VFs when the user actually creates a VF. So this resource distribution can be based on the number of active VFs. This patch adds the support to check for the firmware capability and follow the new RDMA VF resource allocation strategy. The current logic in the RDMA driver will be removed for the newer Firmware versions in a subsequent patch in this series. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/1730882676-24434-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-08-29bnxt_en: Remove BNXT_FLAG_USING_MSIX flagMichael Chan
Now that we only support MSIX, the BNXT_FLAG_USING_MSIX is always true. Remove it and any if conditions checking for it. Remove the INTX handler and associated logic. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240828183235.128948-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-29bnxt_en: Support QOS and TPID settings for the SRIOV VLANSreekanth Reddy
With recent changes in the .ndo_set_vf_*() guidelines, resubmitting this patch that was reverted eariler in 2023: c27153682eac ("Revert "bnxt_en: Support QOS and TPID settings for the SRIOV VLAN") Add these missing settings in the .ndo_set_vf_vlan() method. Older firmware does not support the TPID setting so check for proper support. Remove the unused BNXT_VF_QOS flag. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240828183235.128948-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded responseMichael Chan
Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize. Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious. Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-21bnxt_en: Rename some macros for the P5 chipsRandy Schacher
In preparation to support a new P7 chip which has a lot of similarities with the P5 chip, rename the BNXT_FLAG_CHIP_P5 flag to BNXT_FLAG_CHIP_P5_PLUS. This will make it clear that the flag is for P5 and newer chips. Also, since there are no additional P5 variants in production, rename BNXT_FLAG_CHIP_P5_THOR() to BNXT_FLAG_CHIP_P5() to keep the naming more simple. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231120234405.194542-14-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-17eth: bnxt: fix backward compatibility with older devicesJakub Kicinski
Recent FW interface update bumped the size of struct hwrm_func_cfg_input above 128B which is the max some devices support. Probe on Stratus (BCM957452) with FW 20.8.3.11 fails with: bnxt_en ...: Unable to reserve tx rings bnxt_en ...: 2nd rings reservation failed. bnxt_en ...: Not enough rings available. Once probe is fixed other errors pop up: bnxt_en ...: Failed to set async event completion ring. This is because __hwrm_send() rejects requests larger than bp->hwrm_max_ext_req_len with -E2BIG. Since the driver doesn't actually access any of the new fields, yet, trim the length. It should be safe. Similar workaround exists for backing_store_cfg_input. Although that one mins() to a constant of 256, not 128 we'll effectively use here. Michael explains: "the backing store cfg command is supported by relatively newer firmware that will accept 256 bytes at least." To make debugging easier in the future add a warning for oversized requests. Fixes: 754fbf604ff6 ("bnxt_en: Update firmware interface to 1.10.2.171") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231016171640.1481493-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Revert "bnxt_en: Support QOS and TPID settings for the SRIOV VLAN"Jakub Kicinski
This reverts commit e76d44fe722761f5480b908e38c5ce1a2c2cb6d6. We no longer accept drivers extending their use of the legacy SR-IOV configuration APIs. Users should move to bridge offload. Link: https://lore.kernel.org/r/20231004112243.41cb6351@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04bnxt_en: Update VNIC resource calculation for VFsVikas Gupta
Newer versions of firmware will pre-reserve 1 VNIC for every possible PF and VF function. Update the driver logic to take this into account when assigning VNICs to the VFs. These pre-reserved VNICs for the inactive VFs should be subtracted from the global pool before assigning them to the active VFs. Not doing so may cause discrepancies that ultimately may cause some VFs to have insufficient VNICs to support features such as aRFS. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04bnxt_en: Support QOS and TPID settings for the SRIOV VLANSreekanth Reddy
Add these missing settings in the .ndo_set_vf_vlan() method. Older firmware does not support the TPID setting so check for proper support. Remove the unused BNXT_VF_QOS flag. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-13bnxt_en: Allow to set switchdev mode without existing VFsIvan Vecera
Remove an inability of bnxt_en driver to set eswitch to switchdev mode without existing VFs by: 1. Allow to set switchdev mode in bnxt_dl_eswitch_mode_set() so representors are created only when num_vfs > 0 otherwise just set bp->eswitch_mode 2. Do not automatically change bp->eswitch_mode during bnxt_vf_reps_create() and bnxt_vf_reps_destroy() calls so the eswitch mode is managed only by an user by devlink. Just set temporarily bp->eswitch_mode to legacy to avoid re-opening of representors during destroy. 3. Create representors in bnxt_sriov_enable() if current eswitch mode is switchdev one Tested by this sequence: 1. Set PF interface up 2. Set PF's eswitch mode to switchdev 3. Created N VFs 4. Checked that N representors were created 5. Set eswitch mode to legacy 6. Checked that representors were deleted 7. Set eswitch mode back to switchdev 8. Checked that representors exist again for VFs 9. Deleted all VFs 10. Checked that all representors were deleted as well 11. Checked that current eswitch mode is still switchdev Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Link: https://lore.kernel.org/r/20230411120443.126055-1-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-01RDMA/bnxt_re: Remove the sriov config callbackAjit Khaparde
Remove the SRIOV config callback which the bnxt_en was calling to reconfigure the chip resources for a PF device when VFs are created. The code is now modified to provision the VF resources based on the total VF count instead of the actual VF count. This allows the SRIOV config callback to be removed from the list of ulp_ops. Suggested-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2022-08-23bnxt_en: fix NQ resource accounting during vf creation on 57500 chipsVikas Gupta
There are 2 issues: 1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs with the number of NQs assigned to the VFs. The IRQs are fixed on each function and cannot be re-assigned. Only the NQs are being assigned to the VFs. 2. vf_msix is the total number of NQs to be assigned to the VFs. So we should decrement vf_msix from hw_resc->max_nqs. Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: reclaim max resources if sriov enable failsKashyap Desai
If bnxt_sriov_enable() fails after some resources have been reserved for the VFs, the current code is not unwinding properly and the reserved resources become unavailable afterwards. Fix it by properly unwinding with a call to bnxt_hwrm_func_qcaps() to reset all maximum resources. Also, add the missing bnxt_ulp_sriov_cfg() call to let the RDMA driver know to abort. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10ethernet: Remove vf rate limit check for driversBin Chen
The commit a14857c27a50 ("rtnetlink: verify rate parameters for calls to ndo_set_vf_rate") has been merged to master, so we can to remove the now-duplicate checks in drivers. Signed-off-by: Bin Chen <bin.chen@corigine.com> Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220609084717.155154-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21bnxt: use the devlink instance lock to protect sriovJakub Kicinski
In prep for .eswitch_mode_set being called with the devlink instance lock held use that lock explicitly instead of creating a local mutex just for the sriov reconfig. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: update all firmware calls to use the new APIsEdwin Peer
The conversion follows this general pattern for most of the calls: 1. The input message is changed from a stack variable initialized using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized using hwrm_req_init(). 2. If we don't need to read the firmware response, the hwrm_send_message() call is replaced with hwrm_req_send(). 3. If we need to read the firmware response, the mutex lock is replaced by hwrm_req_hold() to hold the response. When the response is read, the mutex unlock is replaced by hwrm_req_drop(). If additional DMA buffers are needed for firmware response data, the hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent(). Some minor refactoring is also done while doing these conversions. v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings() and bnxt_approve_mac() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: use link_lock instead of hwrm_cmd_lock to protect link_infoEdwin Peer
We currently use the hwrm_cmd_lock to serialize the update of the firmware's link status response data and the copying of link status data to the VF. This won't work when we update the firmware message APIs, so we use the link_lock mutex instead. All link_info data should be updated under the link_lock mutex. Also add link_lock to functions that touch link_info in __bnxt_open_nic() and bnxt_probe_phy(). The locking is probably not strictly necessary during probe, but it's more consistent. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: move HWRM API implementation into separate fileEdwin Peer
Move all firmware messaging functions and definitions to new bnxt_hwrm.[ch]. The follow-on patches will make major modifications to these APIs. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28bnxt_en: Update firmware interface to 1.10.2.47Michael Chan
Adding the PTP related firmware interface is the main change. There is also a name change for admin_mtu, requiring code fixup. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Call bnxt_approve_mac() after the PF gives up control of the VF MAC.Michael Chan
When the PF is no longer enforcing an assigned MAC address on a VF, the VF needs to call bnxt_approve_mac() to tell the PF what MAC address it is now using. Otherwise it gets out of sync and the PF won't know what MAC address the VF wants to use. Ultimately the VF will fail when it tries to setup the L2 MAC filter for the vnic. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Move bnxt_approve_mac().Michael Chan
Move it before bnxt_update_vf_mac(). In the next patch, we need to call bnxt_approve_mac() from bnxt_update_mac() under some conditions. This will avoid forward declaration. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: allow VF config ops when PF is closedEdwin Peer
It is perfectly legal for the stack to query and configure VFs via PF NDOs while the NIC is administratively down. Remove the unnecessary check for the PF to be in open state. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: allow promiscuous mode for trusted VFsEdwin Peer
Firmware previously only allowed promiscuous mode for VFs associated with a default VLAN. It is now possible to enable promiscuous mode for a VF having no VLAN configured provided that it is trusted. In such cases the VF will see all packets received by the PF, irrespective of destination MAC or VLAN. Note, it is necessary to query firmware at the time of bnxt_promisc_ok() instead of in bnxt_hwrm_func_qcfg() because the trusted status might be altered by the PF after the VF has been configured. This check must now also be deferred because the firmware call sleeps. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-23net: don't include ethtool.h from netdevice.hJakub Kicinski
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-27bnxt_en: Update firmware interface spec to 1.10.1.65.Michael Chan
The main changes include FEC, ECN statistics, HWRM_PORT_PHY_QCFG response size reduction, and a new counter added to ctx_hw_stats_ext struct to support the new 58818 chip. The ctx_hw_stats_ext structure is now the superset supporting the new 58818 chips and the prior P5 chips. Add a new flag to identify the new chip and use constants for the chip specific ring statistics sizes instead of the size of the structure. Because the HWRM_PORT_PHY_QCFG response structure size has shrunk back to 96 bytes, the workaround added earlier to limit the size of this message for forwarding to the VF can be removed. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27bnxt_en: Update firmware interface to 1.10.1.54.Michael Chan
Main changes are 200G support and fixing the definitions of discard and error counters to match the hardware definitions. Because the HWRM_PORT_PHY_QCFG message size has now exceeded the max. encapsulated response message size of 96 bytes from the PF to the VF, we now need to cap this message to 96 bytes for forwarding. The forwarded response only needs to contain the basic link status and speed information and can be capped without adding the new information. v2: Fix bnxt_re compile error. Cc: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10bnxt_en: fix NULL dereference in case SR-IOV configuration failsDavide Caratti
we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence: # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on will cause a kernel crash similar to this: bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04bnxt_en: Do not include ETH_FCS_LEN in the max packet length sent to fw.Vasundhara Volam
The firmware does not expect the CRC to be included in the length passed from the driver. The firmware always configures the chip to strip out the CRC. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bnxt_en: Fix VF anti-spoof filter setup.Michael Chan
Fix the logic that sets the enable/disable flag for the source MAC filter according to firmware spec 1.7.1. In the original firmware spec. before 1.7.1, the VF spoof check flags were not latched after making the HWRM_FUNC_CFG call, so there was a need to keep the func_flags so that subsequent calls would perserve the VF spoof check setting. A change was made in the 1.7.1 spec so that the flags became latched. So we now set or clear the anti- spoof setting directly without retrieving the old settings in the stored vf->func_flags which are no longer valid. We also remove the unneeded vf->func_flags. Fixes: 8eb992e876a8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08bnxt_en: Remove unnecessary assignment of return codeVasundhara Volam
As part of converting error code in firmware message to standard code, checking for firmware return code is removed in most of the places. Remove the assignment of return code where the function can directly return. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-24bnxt_en: Assign more RSS context resources to the VFs.Michael Chan
The driver currently only assignes 1 RSS context to each VF. This works for the Linux VF driver. But other drivers, such as DPDK, can make use of additional RSS contexts. Modify the code to divide up and assign RSS contexts to VFs just like other resources. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-30bnxt_en: Retain user settings on a VF after RESET_NOTIFY event.Vasundhara Volam
Retain the VF MAC address, default VLAN, TX rate control, trust settings of VFs after firmware reset. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Add BNXT_STATE_IN_FW_RESET state.Michael Chan
The new flag will be set in subsequent patches when firmware is going through reset. If bnxt_close() is called while the new flag is set, the FW reset sequence will have to be aborted because the NIC is prematurely closed before FW reset has completed. We also reject SRIOV configurations while FW reset is in progress. v2: No longer drop rtnl_lock() in close and wait for FW reset to complete. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Register buffers for VFs before reserving resources.Vasundhara Volam
When VFs need to be reconfigured dynamically after firmwware reset, the configuration sequence on the PF needs to be changed to register the VF buffers first. Otherwise, some VF firmware commands may not succeed as there may not be PF buffers ready for the re-directed firmware commands. This sequencing did not matter much before when we only supported the normal bring-up of VFs. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Refactor bnxt_sriov_enable().Michael Chan
Refactor the hardware/firmware configuration portion in bnxt_sriov_enable() into a new function bnxt_cfg_hw_sriov(). This new function can be called after a firmware reset to reconfigure the VFs previously enabled. v2: straight refactor of the code. Reordering done in the next patch. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Simplify error checking in the SR-IOV message forwarding functions.Michael Chan
There are 4 functions handling message forwarding for SR-IOV. They check for non-zero firmware response code and then return -1. There is no need to do this anymore. The main messaging function will now return standard error code. Since we don't need to examine the response, we can use the hwrm_send_message() variant which will take the mutex automatically. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Convert error code in firmware message response to standard code.Michael Chan
The main firmware messaging function returns the firmware defined error code and many callers have to convert to standard error code for proper propagation to userspace. Convert bnxt_hwrm_do_send_msg() to return standard error code so we can do away with all the special error code handling by the many callers. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-19bnxt_en: Propagate trusted VF attribute to firmware.Michael Chan
Newer firmware understands the concept of a trusted VF, so propagate the trusted VF attribute set by the PF admin. to the firmware. Also, check the firmware trusted setting when considering the VF MAC address change and reporting the trusted setting to the user. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17bnxt_en: Add SR-IOV support for 57500 chips.Michael Chan
There are some minor differences when assigning VF resources on the new chips. The MSIX (NQ) resource has to be assigned and ring group is not needed on the new chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17bnxt_en: get rid of num_stat_ctxs variableVasundhara Volam
For bnxt_en driver, stat_ctxs created will always be same as cp_nr_rings. Remove extra variable that duplicates the value. Also introduce bnxt_get_avail_stat_ctxs_for_en() helper to get available stat_ctxs and bnxt_get_ulp_stat_ctxs() helper to return number of stat_ctxs used by RDMA. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17bnxt_en: Add bnxt_get_avail_cp_rings_for_en() helper function.Michael Chan
The available CP rings are calculated differently on the new 57500 chips, so add this helper to do this calculation correctly. The VFs will be assigned these available CP rings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17bnxt_en: Fix VF mac address regression.Michael Chan
The recent commit to always forward the VF MAC address to the PF for approval may not work if the PF driver or the firmware is older. This will cause the VF driver to fail during probe: bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF bnxt_en 0000:00:03.0: Unable to initialize mac address. bnxt_en: probe of 0000:00:03.0 failed with error -99 We fix it by treating the error as fatal only if the VF MAC address is locally generated by the VF. Fixes: 707e7e966026 ("bnxt_en: Always forward VF MAC address to the PF.") Reported-by: Seth Forshee <seth.forshee@canonical.com> Reported-by: Siwei Liu <loseweigh@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 18:05:59 +0000