summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/b53/b53_regs.h
AgeCommit message (Collapse)Author
2025-06-17net: dsa: b53: ensure BCM5325 PHYs are enabledÁlvaro Fernández Rojas
According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to disable clocking to individual PHYs. Only ports 1-4 can be enabled or disabled and the datasheet is explicit about not toggling BIT(0) since it disables the PLL power and the switch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250614080000.1884236-15-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: dsa: b53: fix unicast/multicast flooding on BCM5325Álvaro Fernández Rojas
BCM5325 doesn't implement UC_FLOOD_MASK, MC_FLOOD_MASK and IPMC_FLOOD_MASK registers. This has to be handled differently with other pages and registers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250614080000.1884236-13-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL access on BCM5325Álvaro Fernández Rojas
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should avoid reading or writing it. PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325 and we should use PORT_OVERRIDE_LP_FLOW_25 instead. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://patch.msgid.link/20250614080000.1884236-12-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: dsa: b53: fix IP_MULTICAST_CTRL on BCM5325Álvaro Fernández Rojas
BCM5325 doesn't implement B53_UC_FWD_EN, B53_MC_FWD_EN or B53_IPMC_FWD_EN. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://patch.msgid.link/20250614080000.1884236-9-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: dsa: b53: add support for FDB operations on 5325/5365Florian Fainelli
BCM5325 and BCM5365 are part of a much older generation of switches which, due to their limited number of ports and VLAN entries (up to 256) allowed a single 64-bit register to hold a full ARL entry. This requires a little bit of massaging when reading, writing and converting ARL entries in both directions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://patch.msgid.link/20250614080000.1884236-6-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc7). Conflicts: tools/testing/selftests/drivers/net/hw/ncdevmem.c 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array") 2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX") https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au Adjacent changes: net/core/devmem.c net/core/devmem.h 0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload") bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13net: dsa: b53: prevent standalone from trying to forward to other portsJonas Gorski
When bridged ports and standalone ports share a VLAN, e.g. via VLAN uppers, or untagged traffic with a vlan unaware bridge, the ASIC will still try to forward traffic to known FDB entries on standalone ports. But since the port VLAN masks prevent forwarding to bridged ports, this traffic will be dropped. This e.g. can be observed in the bridge_vlan_unaware ping tests, where this breaks pinging with learning on. Work around this by enabling the simplified EAP mode on switches supporting it for standalone ports, which causes the ASIC to redirect traffic of unknown source MAC addresses to the CPU port. Since standalone ports do not learn, there are no known source MAC addresses, so effectively this redirects all incoming traffic to the CPU port. Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-12net: dsa: b53: implement setting ageing timeJonas Gorski
b53 supported switches support configuring ageing time between 1 and 1,048,575 seconds, so add an appropriate setter. This allows b53 to pass the FDB learning test for both vlan aware and vlan unaware bridges. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250510092211.276541-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: dsa: b53: add BCM63268 RGMII configurationÁlvaro Fernández Rojas
BCM63268 requires special RGMII configuration to work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23net: dsa: b53: Support setting learning on portFlorian Fainelli
Add support for being able to set the learning attribute on port, and make sure that the standalone ports start up with learning disabled. We can remove the code in bcm_sf2 that configured the ports learning attribute because we want the standalone ports to have learning disabled by default and port 7 cannot be bridged, so its learning attribute will not change past its initial configuration. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-04-22net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVLFlorian Fainelli
Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status, the default is to perform Shared VLAN learning instead of Individual learning. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: b53: Rework ARL bin logicFlorian Fainelli
When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: b53: Fix ARL register definitionsFlorian Fainelli
The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Define EEE register pageFlorian Fainelli
In preparation for migrating the EEE code from bcm_sf2 to b53, define the full EEE register page and offsets within that page. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Move Broadcom header setup to b53Florian Fainelli
The code to enable Broadcom tags/headers is largely switch independent, and in preparation for enabling it for multiple devices with b53, move the code we have in bcm_sf2.c to b53_common.c Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: dsa: b53: Implement software reset for 58xx devicesFlorian Fainelli
Implement the correct software reset sequence for 58xx devices by setting all 3 reset bits and polling for the SW_RST bit to clear itself without a given timeout. We cannot use is58xx() here because that would also include the 7445/7278 Starfighter 2 which have their own driver doing the reset earlier on due to the HW specific integration. Fixes: 991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: dsa: b53: Include IMP/CPU port in dumb forwarding modeFlorian Fainelli
Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need to make sure that the IMP/CPU port is included in the forwarding decision. Without this change, switching between non-management ports would work, but not between management ports and non-management ports thus breaking the default state in which DSA switch are brought up. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Reported-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: b53: Add mirror capture register definitionsFlorian Fainelli
Add definitions for the different Roboswitch registers relevant for ingress and egress mirroring. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Add JOIN_ALL_VLAN supportFlorian Fainelli
In order to migrate the bcm_sf2 driver over to the b53 driver for most VLAN/FDB/bridge operations, we need to add support for the "join all VLANs" register and behavior which allows us to make a given port join all VLANs and avoid setting specific VLAN entries when it is leaving the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: dsa: b53: Add missing ULL suffix for 64-bit constantGeert Uytterhoeven
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): drivers/net/dsa/b53/b53_common.c: In function ‘b53_arl_read’: drivers/net/dsa/b53/b53_common.c:1072: warning: integer constant is too large for ‘long’ type Fixes: 1da6df85c6fbed8f ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: dsa: b53: Add bridge supportFlorian Fainelli
Add support for HW bridging by tying the ports together in the same port VLAN mask when they belong to the same bridge, and isolating them to be alone with the CPU port when they are not. Propagate STP states from the bridge layer to the switch's HW mapping when requested. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: dsa: b53: Implement ARL add/del/dump operationsFlorian Fainelli
Adds support for FDB add/delete/dump using the ARL read/write logic and the ARL search logic for faster dumps. The code is made flexible enough it could support devices with a different register layout like BCM5325 and BCM5365 which have fewer number of entries or pack values into a single 64 bits register. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: dsa: b53: Add support for Broadcom RoboSwitchFlorian Fainelli
This patch adds support for Broadcom's BCM53xx switch family, also known as RoboSwitch. Some of these switches are ubiquituous, found in home routers, Wi-Fi routers, DSL and cable modem gateways and other networking related products. This drivers adds the library driver (b53_common.c) as well as a few bus glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx). Basic operations are supported to bring the Layer 1/2 up and running, but not much more at this point, subsequent patches add the remaining features. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 10:42:57 +0000