summaryrefslogtreecommitdiff
path: root/drivers/net/can/kvaser_pciefd.c
AgeCommit message (Collapse)Author
8 dayscan: kvaser_pciefd: Split driver into C-file and header-file.Jimmy Assarsson
Split driver into C-file and header-file, to simplify future patches. Move common definitions and declarations to a header file. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
8 dayscan: kvaser_pciefd: Store device channel indexJimmy Assarsson
Store device channel index in netdev.dev_port. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
8 dayscan: kvaser_pciefd: Store the different firmware version components in a structJimmy Assarsson
Store firmware version in kvaser_pciefd_fw_version struct, specifying the different components of the version number. And drop debug prinout of firmware version, since later patches will expose it via the devlink interface. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
8 dayscan: kvaser_pciefd: Add intermediate variable for device struct in probe()Jimmy Assarsson
Add intermediate variable, for readability and to simplify future patches. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
8 dayscan: kvaser_pciefd: Add support for ethtool set_phys_id()Jimmy Assarsson
Add support for ethtool set_phys_id(), to physically locate devices by flashing a LED on the device. Reviewed-by: Axel Forsman <axfo@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
8 dayscan: kvaser_pciefd: Add support to control CAN LEDs on deviceJimmy Assarsson
Add support to turn on/off CAN LEDs on device. Turn off all CAN LEDs in probe, since they are default on after a reset or power on. Reviewed-by: Axel Forsman <axfo@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-29can: kvaser_pciefd: refine error prone echo_skb_max handling logicFedor Pchelkin
echo_skb_max should define the supported upper limit of echo_skb[] allocated inside the netdevice's priv. The corresponding size value provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT which is 17. But later echo_skb_max is rounded up to the nearest power of two (for the max case, that would be 32) and the tx/ack indices calculated further during tx/rx may exceed the upper array boundary. Kasan reported this for the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit function has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: <IRQ> dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 </IRQ> Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq numbers' generation that's not the case - we're free to calculate them as would be more convenient, not taking tx max count into account. The only downside is that the size of echo_skb[] should correspond to the max seq number (not tx max count), so in some situations a bit more memory would be consumed than could be. Thus make the size of the underlying echo_skb[] sufficient for the rounded max tx value. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 8256e0ca6010 ("can: kvaser_pciefd: Fix echo_skb race") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Link: https://patch.msgid.link/20250528192713.63894-1-pchelkin@ispras.ru Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-26Merge tag 'linux-can-next-for-6.16-20250522' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2025-05-22 this is a pull request of 22 patches for net-next/main. The series by Biju Das contains 19 patches and adds RZ/G3E CANFD support to the rcar_canfd driver. The patch by Vincent Mailhol adds a struct data_bittiming_params to group FD parameters as a preparation patch for CAN-XL support. Felix Maurer's patch imports tst-filter from can-tests into the kernel self tests and Vincent Mailhol adds support for physical CAN interfaces. linux-can-next-for-6.16-20250522 * tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits) selftests: can: test_raw_filter.sh: add support of physical interfaces selftests: can: Import tst-filter from can-tests can: dev: add struct data_bittiming_params to group FD parameters can: rcar_canfd: Add RZ/G3E support can: rcar_canfd: Enhance multi_channel_irqs handling can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_info can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_info can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_info can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_info can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_info can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_info can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_info can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_info can: rcar_canfd: Update RCANFD_GAFLCFG macro can: rcar_canfd: Add rcar_canfd_setrnc() can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro can: rcar_canfd: Update RCANFD_GERFL_ERR macro can: rcar_canfd: Drop RCANFD_GAFLCFG_GETRNC macro can: rcar_canfd: Use of_get_available_child_by_name() ... ==================== Link: https://patch.msgid.link/20250522084128.501049-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-21can: dev: add struct data_bittiming_params to group FD parametersVincent Mailhol
This is a preparation patch for the introduction of CAN XL. CAN FD and CAN XL uses similar bittiming parameters. Add one level of nesting for all the CAN FD parameters. Typically: priv->can.data_bittiming; becomes: priv->can.fd.data_bittiming; This way, the CAN XL equivalent (to be introduced later) would be: priv->can.xl.data_bittiming; Add the new struct data_bittiming_params which contains all the data bittiming parameters, including the TDC and the callback functions. This done, update all the CAN FD drivers to make use of the new layout. Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250501171213.2161572-2-mailhol.vincent@wanadoo.fr [mkl: fix rcar_canfd] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-20can: kvaser_pciefd: Continue parsing DMA buf after dropped RXAxel Forsman
Going bus-off on a channel doing RX could result in dropped packets. As netif_running() gets cleared before the channel abort procedure, the handling of any last RDATA packets would see netif_rx() return non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt with this "error" by breaking out of processing the remaining DMA RX buffer. Only return an error from kvaser_pciefd_read_buffer() due to packet corruption, otherwise handle it internally. Cc: stable@vger.kernel.org Signed-off-by: Axel Forsman <axfo@kvaser.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-20can: kvaser_pciefd: Fix echo_skb raceAxel Forsman
The functions kvaser_pciefd_start_xmit() and kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken when transmitting and KCAN_TX_NR_PACKETS_CURRENT gets decremented prior to handling of ACKs. E.g., this caused the following error: can_put_echo_skb: BUG! echo_skb 5 is occupied! Instead, use the synchronization helpers in netdev_queues.h. As those piggyback on BQL barriers, start updating in-flight packets and bytes counts as well. Cc: stable@vger.kernel.org Signed-off-by: Axel Forsman <axfo@kvaser.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-3-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-20can: kvaser_pciefd: Force IRQ edge in case of nested IRQAxel Forsman
Avoid the driver missing IRQs by temporarily masking IRQs in the ISR to enforce an edge even if a different IRQ is signalled before handled IRQs are cleared. Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR") Cc: stable@vger.kernel.org Signed-off-by: Axel Forsman <axfo@kvaser.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-01-10can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTINGJimmy Assarsson
Add support for CAN_CTRLMODE_BERR_REPORTING, allowing Bus Error Reporting to be enabled or disabled. Previously, Bus Error Reporting was always active. Co-developed-by: Alison Below <alisonbelow@gmail.com> Signed-off-by: Alison Below <alisonbelow@gmail.com> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20241230142645.128244-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() failsJimmy Assarsson
Ensure statistics, error counters, and CAN state are updated consistently, even when alloc_can_err_skb() fails during state changes or error message frame reception. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20241230142645.128244-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.12 net-next PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-12can: kvaser_pciefd: Enable 64-bit DMA addressingMartin Jocic
Enabling 64-bit addressing for DMA buffers will prevent issues on some memory constrained platforms like e.g. Raspberry Pi 5, where the driver won't load because it cannot allocate enough continuous memory in the default 32-bit memory address range. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://patch.msgid.link/d7340f78e3db305bfeeb8229d2dd1c9077e10b92.1725875278.git.martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-30can: kvaser_pciefd: Use a single write when releasing RX buffersMartin Jocic
Kvaser's PCIe cards uses the KCAN FPGA IP block which has dual 4K buffers for incoming messages shared by all (currently up to eight) channels. While the driver processes messages in one buffer, new incoming messages are stored in the other and so on. The design of KCAN is such that a buffer must be fully read and then released. Releasing a buffer will make the FPGA switch buffers. If the other buffer contains at least one incoming message the FPGA will also instantly issue a new interrupt, if not the interrupt will be issued after receiving the first new message. With IRQx interrupts, it takes a little time for the interrupt to happen, enough for any previous ISR call to do it's business and return, but MSI interrupts are way faster so this time is reduced to almost nothing. So with MSI, releasing the buffer HAS to be the very last action of the ISR before returning, otherwise the new interrupt might be "masked" by the kernel because the previous ISR call hasn't returned. And the interrupts are edge-triggered so we cannot loose one, or the ping-pong reading process will stop. This is why this patch modifies the driver to use a single write to the SRB_CMD register before returning. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20240830153113.2081440-1-martin.jocic@kvaser.com Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-08-30can: kvaser_pciefd: Use IS_ENABLED() instead of #ifdefMartin Jocic
Use the IS_ENABLED() macro to check kernel config defines instead of ifdef. Use upper_32_bits() to avoid warnings about "right shift count >= width of type" on systems with CONFIG_ARCH_DMA_ADDR_T_64BIT not set. In kvaser_pciefd_write_dma_map_altera() use lower_32_bits() for symmetry. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://patch.msgid.link/20240830141038.1402217-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Add MSI interruptsMartin Jocic
Use MSI interrupts with fallback to INTx interrupts. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240620181320.235465-3-martin.jocic@kvaser.com [mkl: kvaser_pciefd_probe(): call pci_free_irq_vectors() unconditionally] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISRMartin Jocic
A new interrupt is triggered by resetting the DMA RX buffers. Since MSI interrupts are faster than legacy interrupts, the reset of the DMA buffers must be moved to the very end of the ISR, otherwise a new MSI interrupt will be masked by the current one. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240620181320.235465-2-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Change name of return code variableMartin Jocic
Replace the variable name err used for return codes with the more generic name ret. An upcoming patch series for adding MSI interrupts will introduce code which also returns values other than return codes. Renaming the variable to ret enables using it for both purposes. This is applied to the whole file to make it consistent. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240614151524.2718287-8-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Rename board_irq to pci_irqMartin Jocic
Rename the variable name board_irq in the ISR to pci_irq to be more specific and to match the macro by which it is read. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240614151524.2718287-7-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Add unlikelyMartin Jocic
Use unlikely for some unexpected errors. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240614151524.2718287-6-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Add inlineMartin Jocic
Make the short function kvaser_pciefd_set_tx_irq inline. This function is effectively three lines long and therefore inlining it should be OK according to rule #15 of the Linux kernel coding style. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240614151524.2718287-5-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Remove unnecessary commentMartin Jocic
The code speaks for itself. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240614151524.2718287-4-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Skip redundant NULL pointer check in ISRMartin Jocic
This check is already done at the creation of the net devices in kvaser_pciefd_setup_can_ctrls called from kvaser_pciefd_probe. If it fails, the driver won't load, so there should be no need to repeat the check inside the ISR. The number of channels is read from the FPGA and should be trusted. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240614151524.2718287-3-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_pciefd: Group #defines togetherMartin Jocic
Increases readability Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/20240614151524.2718287-2-martin.jocic@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-03-19can: kvaser_pciefd: Add additional Xilinx interruptsMartin Jocić
Since Xilinx-based adapters now support up to eight CAN channels, the TX interrupt mask array must have eight elements. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/2ab3c0585c3baba272ede0487182a423a420134b.camel@kvaser.com Fixes: 9b221ba452aa ("can: kvaser_pciefd: Add support for Kvaser PCIe 8xCAN") [mkl: replace Link by Fixes tag] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-03-04can: kvaser_pciefd: Add support for Kvaser PCIe 8xCANMartin Jocić
Add support for new Kvaser pciefd device, PCIe 8xCAN, based on Xilinx FPGA. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/2b2c720a788e1904283e354abb320adb5b631d26.camel@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCANJimmy Assarsson
Add support for new Kvaser pciefd device, M.2 PCIe 4xCAN, based on Xilinx FPGA. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20231113134717.515037-1-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19can: kvaser_pciefd: Add support for new Kvaser pciefd devicesJimmy Assarsson
Add support for new Kvaser pciefd devices, based on SmartFusion2 SoC. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20230622151153.294844-3-extja@kvaser.com [mkl: mark structs as static] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19can: kvaser_pciefd: Move hardware specific constants and functions into a ↵Jimmy Assarsson
driver_data struct Move hardware specific address offsets, interrupt masks and DMA mapping function, into struct kvaser_pciefd_driver_data, as a step towards adding new devices based on different hardware. Co-developed-by: Martin Jocic <majoc@kvaser.com> Signed-off-by: Martin Jocic <majoc@kvaser.com> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20230622151153.294844-2-extja@kvaser.com [mkl: mark structs as static] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Use TX FIFO size read from CAN controllerJimmy Assarsson
Use the TX FIFO size read from CAN controller register, instead of using hard coded value. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-15-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Refactor codeJimmy Assarsson
Refactor code; - Format code - Rename variables and macros - Remove intermediate variables - Add/remove blank lines - Reduce scope of variables - Add helper functions Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-14-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Add len8_dlc supportJimmy Assarsson
Add support for the Classical CAN raw DLC functionality to send and receive DLC values from 9 .. 15. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-13-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Use FIELD_{GET,PREP} and GENMASK where appropriateJimmy Assarsson
Replace opencoded masking and shifting, with GENMASK, FIELD_GET and FIELD_PREP macros. Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-12-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Sort register definitionsJimmy Assarsson
Sort the registers defines, in the same order as the register bits/fields are defined. Sort register bits/fields in MSB-to-LSB order. Update and add comments. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-11-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Change return type for ↵Jimmy Assarsson
kvaser_pciefd_{receive,transmit,set_tx}_irq() Change return type to void for kvaser_pciefd_transmit_irq(), kvaser_pciefd_receive_irq() and kvaser_pciefd_set_tx_irq(). These functions always return zero. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Rename device ID definesJimmy Assarsson
Rename device ID defines to better match the product name of the supported device. Use 16 bit hexadecimal values for device IDs. And format kvaser_pciefd_id_table using clang-format. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-9-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Sort includes in alphabetic orderJimmy Assarsson
Sort the includes in alphabetic order. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-8-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove SPI flash parameter read functionalityJimmy Assarsson
Remove SPI flash parameter read functionality, since it's only used for reading the interface CAN controller count. This information is already read from a register, making the information redundant. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Define unsigned constants with type suffix 'U'Jimmy Assarsson
Define unsigned constants with type suffix 'U' Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Set hardware timestamp on transmitted packetsJimmy Assarsson
Set hardware timestamp on transmitted packets. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Add function to set skb hwtstampsJimmy Assarsson
Add new function, kvaser_pciefd_set_skb_timestamp(), to set skb hwtstamps. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove handler for unused KVASER_PCIEFD_PACK_TYPE_EFRAME_ACKJimmy Assarsson
The Kvaser KCAN controller got a feature to send error frames on request. The packet KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK signals that the requested error frame was transmitted. Since this feature is not supported by the driver, drop the handler and add KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK to the list of unexpected packet types. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove useless write to interrupt registerJimmy Assarsson
The PCI interrupt register, KVASER_PCIEFD_IRQ_REG, is level triggered. Writing to the register doesn't affect it. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Disable interrupts in probe error pathJimmy Assarsson
Disable interrupts in error path of probe function. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 06:51:03 +0000