summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2017-02-10mtd: spi-nor: improve macronix_quad_enable()Cyrille Pitchen
The patch checks whether the Quad Enable bit is already set in the Status Register. If so, the function exits immediately with a successful return code. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2017-02-10mtd: spi-nor: Add support for S3AN spi-nor devicesRicardo Ribalda
Xilinx Spartan-3AN FPGAs contain an In-System Flash where they keep their configuration data and (optionally) some user data. The protocol of this flash follows most of the spi-nor standard. With the following differences: - Page size might not be a power of two. - The address calculation (default addressing mode). - The spi nor commands used. Protocol is described on Xilinx User Guide UG333 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-09mtd: Add partition device node to mtd partition devicesSascha Hauer
The user visible change here is that mtd partitions get an of_node link in sysfs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-09mtd: bcm47xxpart: support layouts with multiple TRX partitionsRafał Miłecki
Some devices may have an extra TRX partition used as failsafe one. If we detect such partition we should set a proper name for it and don't parse it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-09mtd: bcm47xxpart: move TRX parsing code to separated functionRafał Miłecki
This change simplifies main parsing loop logic a bit. In future it may be useful for moving TRX support to separated module / parser (if we implement support for them at some point). Finally parsing TRX at the end puts us in a better position as we have better flash layout knowledge. It may be useful e.g. if it appears there is more than 1 TRX partition. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: bcm47xxsflash: support reading flash out of mapping windowRafał Miłecki
For reading flash content we use MMIO but it's possible to read only first 16 MiB this way. It's simply an arch design/limitation. To support flash sizes bigger than 16 MiB implement indirect access using ChipCommon registers. This has been tested using MX25L25635F. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08Merge tag 'nand/for-4.11' of github.com:linux-nand/linuxBrian Norris
From Boris: """ This pull request contains minor fixes/improvements on existing drivers: - sunxi: avoid busy-waiting for NAND events - ifc: fix ECC handling on IFC v1.0 - OX820: add explicit dependency on ARCH_OXNAS in Kconfig - core: add a new manufacture ID and fix a kernel-doc warning - fsmc: kill pdata support - lpc32xx_slc: remove unneeded NULL check """ Conflicts: include/linux/mtd/nand.h [Brian: trivial conflict in the comment section]
2017-02-08mtd: Fix typo: "occured" -> "occurred"Nobuhiro Iwamatsu
Trivial typo fix in comment. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.kw@hitachi.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: nand: set max_bb_per_die and blocks_per_die for ONFI compliant chipsZach Brown
ONFI compliant chips contain the values for the max_bb_per_die and blocks_per_die fields in the parameter page. When the ONFI paged is retrieved/parsed the chip's fields are set by the corresponding fields in the param page. Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Boris Brezillon <boris.brezillon@free-electron.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: nand: implement 'max_bad_blocks' mtd functionZach Brown
Implement the new mtd function 'max_bad_blocks'. Using the chip's max_bb_per_die and blocks_per_die fields to determine the maximum bad blocks to reserve for an MTD. Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Boris Brezillon <boris.brezillon@free-electron.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: ichxrom: maybe-uninitialized with gcc-4.9Arnd Bergmann
pci_read_config_word() might fail and not initialize its output, as pointed out by older versions of gcc when using the -Wmaybe-unintialized flag: drivers/mtd/maps/ichxrom.c: In function ‘ichxrom_cleanup’: drivers/mtd/maps/ichxrom.c:63:2: error: ‘word’ is used uninitialized in this function [-Werror=uninitialized] This is apparently a correct warning, though it does not show up with newer compilers. Changing the code to not attempt to write back uninitialized data into PCI config space is a correct fix for the problem and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: introduce function max_bad_blocksJeff Westfahl
If implemented, 'max_bad_blocks' returns the maximum number of bad blocks to reserve for a MTD. An implementation for NAND is coming soon. Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Boris Brezillon <boris.brezillon@free-electron.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: fix typos in ooblayout comment blocksMasahiro Yamada
- "This functions return ..." -> "This function returns ..." - "I you want ..." -> "If you want ..." Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: pmcmsp: use kstrndup instead of kmalloc+strncpyArnd Bergmann
kernelci.org reports a warning for this driver, as it copies a local variable into a 'const char *' string: drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] Using kstrndup() simplifies the code and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: physmap_of: add a hook for Gemini flash probingLinus Walleij
In order to support device tree probing of Gemini NOR flash chips, a certain register in the syscon needs to be poked to enable parallel flash mode. Such things used to happen in "necessarily different" board file code, and this indeed was also done for the Gemini, so the MTD driver could treat it as any memory-mapped NOR flash, but this is not the way in the future: board files need to go, and hardware concerns distributed down to the applicable drivers. This adds a hook in the same way that the Versatile did: if the Kconfig symbol is not selected the net total of supporting Gemini should be zero bytes of added code. To live up to this promise, also the return value error print from the Versatile extra probe call get to be removed in this patch, all printing need to happen in the add-ons. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: update my email addressJohn Crispin
This patch updates my email address as I no longer have access to the old one. Signed-off-by: John Crispin <john@phrozen.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-08mtd: bcm47xxsflash: use platform_(set|get)_drvdataRafał Miłecki
We have generic place & helpers for storing platform driver data so there is no reason for using custom priv pointer. This allows cleaning up struct bcma_sflash from unneeded fields. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-06mtd: nand: Add Winbond manufacturer idAndrey Jr. Melnikov
Add WINBOND manufacturer id. Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06mtd: nand: sunxi: Improve sunxi_nfc_cmd_ctrl()Boris Brezillon
We only need to call sunxi_nfc_wait_cmd_fifo_empty() if we want to send a new command. Move the sunxi_nfc_wait_cmd_fifo_empty() call to right place to avoid extra register reads. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06mtd: nand: sunxi: Stop using polling mode when waiting for long operationsBoris Brezillon
Some operations, like read/write an entire page of data with the ECC engine enabled, are known to take a lot of time. Use the interrupt-based waiting mode in these situation. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06mtd: nand: sunxi: Fix the non-polling case in sunxi_nfc_wait_events()Boris Brezillon
wait_for_completion_timeout() returns 0 if a timeout occurred, 1 otherwise. Fix the sunxi_nfc_wait_events() accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0Mark Marshall
The commit 7a654172161c ("mtd/ifc: Add support for IFC controller version 2.0") added support for version 2.0 of the IFC controller. The version 2.0 controller has the ECC status registers at a different location to the previous versions. Correct the fsl_ifc_nand structure so that the ECC status can be read from the correct location for both version 1.0 and 2.0 of the controller. Cc: stable@vger.kernel.org Fixes: 7a654172161c ("mtd/ifc: Add support for IFC controller version 2.0") Signed-off-by: Mark Marshall <mark.marshall@omicronenergy.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-31block: fold cmd_type into the REQ_OP_ spaceChristoph Hellwig
Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-30mtd: nand: mediatek: remove redundant dev_err call in mtk_nfc_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-30mtd: nand: Add OX820 NAND hardware dependencyJean Delvare
The oxnas NAND driver is only needed for a specific platform, do not propose it on other platforms unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support") Cc: Rob Herring <robh@kernel.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-30mtd: nand: fsmc: remove stale non-DT probe pathLinus Walleij
The FSMC driver has an execution path and a header file in <linux/mtd/fsmc.h> that serves to support passing in platform data through board files, albeit no upstream users of this mechanism exist. The header file also contains function headers for functions that do not exist in the kernel. Delete this and move the platform data struct, parsing and handling into the driver, assume we are using OF and make the driver depend on OF, remove the ifdefs making that optional. Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Stefan Roese <sr@denx.de> Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-30mtd: nand: lpc32xx_slc: Remove unneeded NULL check on 'rc'Fabio Estevam
devm_ioremap_resource() does a NULL check on the 'rc' argument, so remove the unneeded manual NULL check. While at it, place the 'rc' assignment just before devm_ioremap_resource() to improve readability. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-04mtd: nand: lpc32xx: fix invalid error handling of a requested irqVladimir Zapolskiy
Semantics of NR_IRQS is different on machines with SPARSE_IRQ option disabled or enabled, in the latter case IRQs are allocated starting at least from the value specified by NR_IRQS and going upwards, so the check of (irq >= NR_IRQ) to decide about an error code returned by platform_get_irq() is completely invalid, don't attempt to overrule irq subsystem in the driver. The change fixes LPC32xx NAND MLC driver initialization on boot. Fixes: 8cb17b5ed017 ("irqchip: Add LPC32xx interrupt controller driver") Cc: stable@kernel.org # v4.7+ Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-04mtd: spi-nor: cqspi: Fix build on arches missing readsl/writeslMarek Vasut
The x86-64 and some other architectures are missing readsl/writesl functions, so this driver won't build on them. Use a more portable ioread32_rep()/iowrite32_rep() instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alan Tull <atull@opensource.altera.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Graham Moore <grmoore@opensource.altera.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Yves Vandervennet <yvanderv@opensource.altera.com> Suggested-by: Stefan Roese <sr@denx.de> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-01-03spi-nor: Add support for Intel SPI serial flash controllerMika Westerberg
Add support for the SPI serial flash host controller found on many Intel CPUs including Baytrail and Braswell. The SPI serial flash controller is used to access BIOS and other platform specific information. By default the driver exposes a single read-only MTD device but with a module parameter "writeable=1" the MTD device can be made read-write which makes it possible to upgrade BIOS directly from Linux. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-03mtd: nand: tango: Reset pbus to raw mode in probeMarc Gonzalez
Linux should not expect the boot loader to properly configure the peripheral bus "pad mode", so reset PBUS_PAD_MODE to raw. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-03mtd: nand: tango: Update DT binding descriptionMarc Gonzalez
Visually separate register ranges (address/size pairs) in reg prop. Change DMA channel name, for consistency with other drivers. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-02mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEMRandy Dunlap
Fix build errors on arch/um, which does not support HAS_IOMEM, while the oxnas_nand.c driver uses interfaces that are supplied by HAS_IOMEM. (loadable module build:) ERROR: "devm_ioremap_resource" [drivers/mtd/nand/oxnas_nand.ko] undefined! or (built-in build:) drivers/built-in.o: In function `oxnas_nand_probe': drivers/mtd/nand/oxnas_nand.c:102: undefined reference to `devm_ioremap_resource' Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-02mtd: nand: xway: fix build because of module functionsHauke Mehrtens
Remove the usage of modules functions to make this driver compile again. Otherwise an include of linux/modules.h would be needed. Fixes: 024366750c2e ("mtd: nand: xway: convert to normal platform driver") Cc: <stable@vger.kernel.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-02mtd: nand: xway: disable module supportHauke Mehrtens
The xway_nand driver accesses the ltq_ebu_membase symbol which is not exported. This also should not get exported and we should handle the EBU interface in a better way later. This quick fix just deactivated support for building as module. Fixes: 99f2b107924c ("mtd: lantiq: Add NAND support on Lantiq XWAY SoC.") Cc: <stable@vger.kernel.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-17Merge tag 'for-linus-20161216' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "Nothing enormous here, though notably we have some of the first work of a few new maintainers. I think for now I'll still be sending pull requests, but that's open to change in the future. Summary: Core: - dynamic BDI object allocation (resolves some problems when built as a module) - cleanups in the ooblayout handling NAND: - new tango NAND controller driver - new ox820 NAND controller driver - addition of a new full-ID entry in the nand_ids table - rework of the s3c240 driver to support DT - extension of the nand_sdr_timings to expose tCCS, tPROG and tR - addition of a new flag to ask the core to wait for tCCS when sending a RNDIN/RNDOUT command - addition of a new flag to ask the core to let the controller driver send the READ/PROGPAGE command Minor fixes/cleanup/cosmetic changes: - properly support 512 ECC step size in the sunxi driver - improve the error messages in the PXA probe path - fix module autoload in the omap2 driver - cleanup of several nand drivers to return nand_scan{_tail}() error code instead of returning -EIO - various cleanups in the denali driver - fix an error check in nandsim SPI NOR: - new flash IDs - wait for Spansion flash to be ready after quad-enable - error handling fixes for Candence QSPI - constify some structures in Freescale QSPI driver" * tag 'for-linus-20161216' of git://git.infradead.org/linux-mtd: (71 commits) mtd: Allocate bdi objects dynamically mtd: nand: tango: Add standard legalese header mtd: maps: add missing iounmap() in error path mtd: spi-nor: constify fsl_qspi_devtype_data mtd: spi-nor: Add support for mr25h40 mtd: spi-nor: Add support for N25Q016A mtd: spi-nor: Add at25df321 spi-nor flash support mtd: spi-nor: Fix some error codes in cqspi_setup_flash() mtd: spi-nor: Off by one in cqspi_setup_flash() mtd: spi-nor: add support for s25fl208k mtd: spi-nor: fix flags for s25fl128s mtd: spi-nor: fix spansion quad enable mtd: spi-nor: add Macronix mx25u25635f to list of known devices. mtd: mtdswap: fix spelling mistake "erassure" -> "erasure" mtd: bcm47xxpart: fix parsing first block after aligned TRX mtd: nand: tango: Use nand_to_mtd() instead of directly accessing chip->mtd mtd: remove unneeded initializer in mtd_ooblayout_count_bytes() mtd: use min_t() to refactor mtd_ooblayout_{get, set}_bytes() mtd: remove unneeded initializer in mtd_ooblayout_{get, set}_bytes() mtd: nand: nandsim: fix error check ...
2016-12-01mtd: Allocate bdi objects dynamicallySteve Longerbeam
The MTD backing dev info objects mtd_bdi was statically allocated. So when MTD is built as a loadable module, this object fall in the vmalloc address space. The problem with that, is that the BDI APIs use wake_up_bit(), which calls virt_to_page() to retrieve the memory zone of the page containing the wait_queue to wake up, and virt_to_page() is not valid for vmalloc or highmem addresses. Fix this by allocating the BDI objects dynamically with kmalloc. The objects now fall in the logical address space so that BDI APIs will work in all cases (mtd builtin or module). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Sandeep Jain <Sandeep_Jain@mentor.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-12-01mtd: nand: tango: Add standard legalese headerMarc Gonzalez
Provide proper copyright notice and license information. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-11-30mtd: maps: add missing iounmap() in error pathLuis Henriques
This patch was triggered by the following Coccinelle error: ./drivers/mtd/maps/sc520cdp.c:246:3-9: \ ERROR: missing iounmap; ioremap on line 242 \ and execution via conditional on line 244 Since do_map_probe() is also invoked in this loop, it is also necessary to map_destroy() any initialised struct mtd_info. Signed-off-by: Luis Henriques <henrix@camandro.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-11-29Merge tag 'spi-nor/for-4.10' of git://github.com/spi-nor/linuxBrian Norris
From Cyrille Pitchen: """ This pull request contains the following notable changes: - add support to new memory parts. - fix of spansion_quad_enable(). - fix of the Candence QSPI driver. - constify some structure instances of the Freescale QSPI driver. """
2016-11-29Merge tag 'nand/for-4.10' of github.com:linux-nand/linuxBrian Norris
From Boris Brezillon: """ This pull request contains the following notable changes: - new tango NAND controller driver - new ox820 NAND controller driver - addition of a new full-ID entry in the nand_ids table - rework of the s3c240 driver to support DT - extension of the nand_sdr_timings to expose tCCS, tPROG and tR - addition of a new flag to ask the core to wait for tCCS when sending a RNDIN/RNDOUT command - addition of a new flag to ask the core to let the controller driver send the READ/PROGPAGE command This pull request also contains minor fixes/cleanup/cosmetic changes: - properly support 512 ECC step size in the sunxi driver - improve the error messages in the pxa probe path - fix module autoload in the omap2 driver - cleanup of several nand drivers to return nand_scan{_tail}() error code instead of returning -EIO - various cleanups in the denali driver - cleanups in the ooblayout handling (MTD core) - fix an error check in nandsim """
2016-11-26mtd: spi-nor: constify fsl_qspi_devtype_dataLABBE Corentin
All fsl_qspi_devtype_data structures are never modified. This patch constify them. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2016-11-26mtd: spi-nor: Add support for mr25h40IWAMOTO Masahiko
Add Everspin mr25h40 512KB MRAM to the list of supported chips. Signed-off-by: Masahiko Iwamoto <iwamoto@allied-telesis.co.jp> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2016-11-26mtd: spi-nor: Add support for N25Q016AMoritz Fischer
This commit adds support in the spi-nor driver for the N25Q016A, a 16Mbit SPI NOR flash from Micron. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Jagan Teki <jteki@openedev.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2016-11-26mtd: spi-nor: Add at25df321 spi-nor flash supportJagan Teki
Add Atmel at25df321 spi-nor flash to the list of spi_nor_ids. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2016-11-26mtd: spi-nor: Fix some error codes in cqspi_setup_flash()Dan Carpenter
We return success or possibly uninitialized values on these error paths instead of proper error codes. Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2016-11-26mtd: spi-nor: Off by one in cqspi_setup_flash()Dan Carpenter
There are CQSPI_MAX_CHIPSELECT elements in the ->f_pdata array so the > should be >=. Fixes: 140623410536 ('mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2016-11-26mtd: spi-nor: add support for s25fl208kSean Nyekjaer
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2016-11-26mtd: spi-nor: fix flags for s25fl128sHeiner Kallweit
The Spansion S25FL128S also supports dual read mode. In addition remove flag SECT_4K. 4K erases are supported, but not uniformly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:55:20 +0000