| Age | Commit message (Collapse) | Author |
|---|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Set the v4l2_device already in async notifier init, so struct device
related to it will be available before the notifier is registered. This
requires separating notifier initialisation into two functions, one that
takes v4l2_device as its argument, v4l2_async_nf_init and
v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the
notifier will use a single function, v4l2_async_nf_register.
This is done in order to make struct device available earlier, during
construction of the async connections, for sensible debug prints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Rename v4l2_async_subdev as v4l2_async_connection, in order to
differentiate between the sub-devices and their connections: one
sub-device can have many connections but the V4L2 async framework has so
far allowed just a single one. Connections in this context will later
translate into either MC ancillary or data links.
This patch prepares changing that relation by changing existing users of
v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices
themselves will not be needed anymore
Additionally, __v4l2_async_nf_add_subdev() has been renamed
__v4l2_async_nf_add_connection().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As a top MC video driver, the microchip-isc should not propagate the format
to the subdevice, it should rather check at start_streaming() time if the
subdev is properly configured with a compatible format.
Removed the whole format finding logic, and reworked the format
verification at start_streaming time, such that the ISC will return an
error if the subdevice is not properly configured.
To achieve this, media_pipeline_start is called and a link_validate
callback is created to check the formats.
With this being done, the module parameter 'sensor_preferred' makes no
sense anymore. The ISC should not decide which format the sensor is using.
The ISC should only cope with the situation and inform userspace if the
streaming is possible in the current configuration.
The redesign of the format propagation has also risen the question of the
enumfmt callback. If enumfmt is called with an mbus_code, the enumfmt
handler should only return the formats that are supported for this
mbus_code. Otherwise, the enumfmt will report all the formats that the ISC
could output.
With this rework, the dynamic list of user formats is removed. It makes no
more sense to identify at complete time which formats the sensor could
emit, and add those into a separate dynamic list.
The ISC will start with a simple preconfigured default format, and at
link validate time, decide whether it can use the format that is
configured on the sink or not.
>From now on, the driver also advertises the IO_MC capability.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Prepare the support for media-controller.
This means that the capabilities of the driver have changed and now it's
capable of media controller operations.
The driver will register its media device, and add the video entity to this
media device. The subdevices are registered to the same media device.
The ISC will have a base entity which is auto-detected as
microchip_isc_base.
It will also register a subdevice that allows cropping of the incoming
frame to the maximum frame size supported by the ISC.
The ISC will create a link between the subdevice that is asynchronously
registered and the microchip_isc_scaler entity.
Then, the microchip_isc_scaler and microchip_isc_base are connected
through another link.
This patch does not change the previous capability of the driver, the
fact that the format is still being propagated from the top video node
down to the sensor.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The Atmel ISC driver will be moved to staging to support old users that
are not using the media controller paradigm.
The ISC driver was converted to media controller in the public patch
series:
https://lore.kernel.org/lkml/20220503095127.48710-1-eugen.hristev@microchip.com/T/#m2c320fa8153c01379a1c35b1d90a00903949513a
However the conversion cannot be done directly as it would affect existing
users by breaking the old way of configuration for sama5d2 platforms.
After discussions with the media maintainers, the decision is to move
Atmel ISC to staging as-is, to keep the Kconfig symbols and the users
to the driver in staging. Thus, all the existing users of the non
media-controller paradigm will continue to be happy and use the old config
way.
The converted driver would support both sama5d2 and sama7g5 platforms with
media controller paradigm, but it requires userspace configuration of the
pipeline for all the pipeline modules.
In a simple configuration sensor ==> isc , the old isc driver used to call
subdev s_fmt and control the sensor directly.
This was achieved by having a lot of code inside the driver that was
querying the subdev at probe time and made a list of formats which are
usable.
Basically the user had nothing to configure, as the isc would handle
everything at the top level. This was an easy way to capture, but also came
with the drawback of lack of flexibility.
In a more complicated pipeline
sensor ==> controller 1 ==> controller 2 ==> isc
this would not be achievable, as controller 1 and controller 2 might be
media-controller configurable, and will not propagate the formats down to
the sensor.
The new driver Microchip ISC would solve all these problems and exposes pads
entities and links to userspace.
For the ease of tracking, the patches that convert to media controller come
on top of this patch that simply readds the driver to the new location under
the new Kconfig symbols.
To differentiate between the old driver and the new driver, I have renamed
the new driver to Microchip ISC, renaming the Kconfig symbols as well, and
all the mentions inside the driver.
The only thing that remains common is the file
include/linux/atmel-isc-media.h which is the ABI for the v4l2 custom
controls that the ISC exposes.
This file is used by both driver, so I kept it as-is.
To further avoid confusion all files have been renamed and all functions
named isc_* as well.
The exported symbols have been renamed with added microchip_ prefix, to
avoid symbol duplication with the old driver, and to avoid confusion.
Other than that, I have fixed small checkpatch issues when readding the
driver.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
