| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Remove the 'pgsize_bitmap' member from 'struct iommu_ops'
- Convert the x86 drivers over to msi_create_parent_irq_domain()
AMD-Vi:
- Add support for examining driver/device internals via debugfs
- Add support for "HATDis" to disable host translation when it is not
supported
- Add support for limiting the maximum host translation level based
on EFR[HATS]
Apple DART:
- Don't enable as built-in by default when ARCH_APPLE is selected
Arm SMMU:
- Devicetree bindings update for the Qualcomm SMMU in the "Milos" SoC
- Support for Qualcomm SM6115 MDSS parts
- Disable PRR on Qualcomm SM8250 as using these bits causes the
hypervisor to explode
Intel VT-d:
- Reorganize Intel VT-d to be ready for iommupt
- Optimize iotlb_sync_map for non-caching/non-RWBF modes
- Fix missed PASID in dev TLB invalidation in cache_tag_flush_all()
Mediatek:
- Fix build warnings when W=1
Samsung Exynos:
- Add support for reserved memory regions specified by the bootloader
TI OMAP:
- Use syscon_regmap_lookup_by_phandle_args() instead of parsing the
node manually
Misc:
- Cleanups and minor fixes across the board"
* tag 'iommu-updates-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
iommu/vt-d: Fix UAF on sva unbind with pending IOPFs
iommu/vt-d: Make iotlb_sync_map a static property of dmar_domain
dt-bindings: arm-smmu: Remove sdm845-cheza specific entry
iommu/amd: Fix geometry.aperture_end for V2 tables
iommu/amd: Wrap debugfs ABI testing symbols snippets in literal code blocks
iommu/amd: Add documentation for AMD IOMMU debugfs support
iommu/amd: Add debugfs support to dump IRT Table
iommu/amd: Add debugfs support to dump device table
iommu/amd: Add support for device id user input
iommu/amd: Add debugfs support to dump IOMMU command buffer
iommu/amd: Add debugfs support to dump IOMMU Capability registers
iommu/amd: Add debugfs support to dump IOMMU MMIO registers
iommu/amd: Refactor AMD IOMMU debugfs initial setup
dt-bindings: arm-smmu: document the support on Milos
iommu/exynos: add support for reserved regions
iommu/arm-smmu: disable PRR on SM8250
iommu/arm-smmu-v3: Revert vmaster in the error path
iommu/io-pgtable-arm: Remove unused macro iopte_prot
iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
iommu/qcom: Fix pgsize_bitmap
...
|
|
When two masters share an IOMMU, calling ops->of_xlate during
the second master's driver init may overwrite iommu->domain set
by the first. This causes the check if (iommu->domain == domain)
in rk_iommu_attach_device() to fail, resulting in the same
iommu->node being added twice to &rk_domain->iommus, which can
lead to an infinite loop in subsequent &rk_domain->iommus operations.
Cc: <stable@vger.kernel.org>
Fixes: 25c2325575cc ("iommu/rockchip: Add missing set_platform_dma_ops callback")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250623020018.584802-1-xxm@rock-chips.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
These drivers just have a constant value for their page size, move it
into their domain_alloc_paging function before setting up the geometry.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # for s390-iommu.c
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> # for exynos-iommu.c
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun50i-iommu.c
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
A few small changes to the remaining drivers using these will allow
them to be removed:
- Exynos wants to allocate fixed 16K/8K allocations
- Rockchip already has a define SPAGE_SIZE which is used by the
dma_map immediately following, using SPAGE_ORDER which is a lg2size
- tegra has size constants already for its two allocations
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use iommu_free_pages() instead.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The global dma_dev trick was mostly because the old domain_alloc op
provided no context, so no way to know which IOMMU was to own the
pagetable, or if a suitable one even existed at all. In the new
multi-instance world with domain_alloc_paging this is no longer a
concern - now we know that the given device must be associated with a
valid IOMMU instance which provided the op to call in the first place,
and therefore that instance can and should be the pagetable owner. To
avoid worrying about the lifetime and stability of the rk_domain->iommus
list, and keep the lookups simple and efficient, we'll still stash a
dma_dev pointer, but now it's accurately per-domain.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/25dc948a7d35c8142c5719ac22bc523f8524d006.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently Rockchip calls iommu_device_register() before it's finished
setting up the hardware and driver state, and as such it now gets
unhappy in various ways when registration starts working the way it was
always intended to, and probing client devices straight away. Reorder
the operations to ensure that what we're registering is a prepared and
functional IOMMU instance.
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/e69532f00bf49d98322b96788edb7e2e305e4006.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now that DT-based probing is finally happening in the right order again,
it reveals an issue in Rockchip's of_xlate, which can now be called
during registration, but is using the global dma_dev which is only
assigned later. However, this makes little sense when we're already
looking up the correct IOMMU device, who should logically be the owner
of the devm allocation anyway.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/771e91cf16b3048e93f657153b76905665878fa2.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250114192642.912331-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Convert iommu/rockchip-iommu.c to use the new page allocation functions
provided in iommu-pages.h.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-8-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216144027.185959-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Trivially update map/unmap to the new interface, which is quite happy
for drivers to still process just one page per call.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ccc21bf7d1d0da8989d4d517a13d0846d6b71a38.1694525662.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use the new helper.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v1-c869a95191f2+5e8-iommu_single_grp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
These drivers are all trivially converted since the function is only
called if the domain type is going to be
IOMMU_DOMAIN_UNMANAGED/DMA.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yong Wu <yong.wu@mediatek.com> #For mtk_iommu.c
Link: https://lore.kernel.org/r/23-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Even though dma-iommu.c and CONFIG_ARM_DMA_USE_IOMMU do approximately the
same stuff, the way they relate to the IOMMU core is quiet different.
dma-iommu.c expects the core code to setup an UNMANAGED domain (of type
IOMMU_DOMAIN_DMA) and then configures itself to use that domain. This
becomes the default_domain for the group.
ARM_DMA_USE_IOMMU does not use the default_domain, instead it directly
allocates an UNMANAGED domain and operates it just like an external
driver. In this case group->default_domain is NULL.
If the driver provides a global static identity_domain then automatically
use it as the default_domain when in ARM_DMA_USE_IOMMU mode.
This allows drivers that implemented default_domain == NULL as an IDENTITY
translation to trivially get a properly labeled non-NULL default_domain on
ARM32 configs.
With this arrangment when ARM_DMA_USE_IOMMU wants to disconnect from the
device the normal detach_domain flow will restore the IDENTITY domain as
the default domain. Overall this makes attach_dev() of the IDENTITY domain
called in the same places as detach_dev().
This effectively migrates these drivers to default_domain mode. For
drivers that support ARM64 they will gain support for the IDENTITY
translation mode for the dma_api and behave in a uniform way.
Drivers use this by setting ops->identity_domain to a static singleton
iommu_domain that implements the identity attach. If the core detects
ARM_DMA_USE_IOMMU mode then it automatically attaches the IDENTITY domain
during probe.
Drivers can continue to prevent the use of DMA translation by returning
IOMMU_DOMAIN_IDENTITY from def_domain_type, this will completely prevent
IOMMU_DMA from running but will not impact ARM_DMA_USE_IOMMU.
This allows removing the set_platform_dma_ops() from every remaining
driver.
Remove the set_platform_dma_ops from rockchip and mkt_v1 as all it does
is set an existing global static identity domain. mkt_v1 does not support
IOMMU_DOMAIN_DMA and it does not compile on ARM64 so this transformation
is safe.
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This allows a driver to set a global static to an IDENTITY domain and
the core code will automatically use it whenever an IDENTITY domain
is requested.
By making it always available it means the IDENTITY can be used in error
handling paths to force the iommu driver into a known state. Devices
implementing global static identity domains should avoid failing their
attach_dev ops.
To make global static domains simpler allow drivers to omit their free
function and update the iommufd selftest.
Convert rockchip to use the new mechanism.
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU v2 found in newer Rockchip SoCs, e.g. RK356x and RK3588, support
placing directory and page tables in up to 40-bit addressable physical
memory.
Remove the use of GFP_DMA32 flag for IOMMU v2 now that the physical
address to the directory table is correctly written to DTE_ADDR.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230617182540.3091374-3-jonas@kwiboo.se
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The physical address to the directory table is currently encoded using
the following bit layout for IOMMU v2.
31:12 - Address bit 31:0
11: 4 - Address bit 39:32
This is also the bit layout used by the vendor kernel.
However, testing has shown that addresses to the directory/page tables
and memory pages are all encoded using the same bit layout.
IOMMU v1:
31:12 - Address bit 31:0
IOMMU v2:
31:12 - Address bit 31:0
11: 8 - Address bit 35:32
7: 4 - Address bit 39:36
Change to use the mk_dtentries ops to encode the directory table address
correctly. The value written to DTE_ADDR may include the valid bit set,
a bit that is ignored and DTE_ADDR reg read it back as 0.
This also update the bit layout comment for the page address and the
number of nybbles that are read back for DTE_ADDR comment.
These changes render the dte_addr_phys and dma_addr_dte ops unused and
is removed.
Fixes: 227014b33f62 ("iommu: rockchip: Add internal ops to handle variants")
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Fixes: c987b65a574f ("iommu/rockchip: Fix physical address decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230617182540.3091374-2-jonas@kwiboo.se
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Smatch complains that
drivers/iommu/rockchip-iommu.c:1306 rk_iommu_probe() warn: missing unwind goto?
The rk_iommu_probe function, after obtaining the irq value through
platform_get_irq, directly returns an error if the returned value
is negative, without releasing any resources.
Fix this by adding a new error handling label "err_pm_disable" and
use a goto statement to redirect to the error handling process. In
order to preserve the original semantics, set err to the value of irq.
Fixes: 1aa55ca9b14a ("iommu/rockchip: Move irq request past pm_runtime_enable")
Signed-off-by: Chao Wang <D202280639@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230417030421.2777-1-D202280639@hust.edu.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Similar to exynos, we need a set_platform_dma_ops() callback for proper
operation on ARM 32 bit after recent changes in the IOMMU framework
(detach ops removal). But also the use of a NULL domain is confusing.
Rework the code to add support for IOMMU_DOMAIN_IDENTITY and a singleton
rk_identity_domain which is assigned to domain when using an identity
mapping rather than "detaching". This makes the code easier to reason about.
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230331095154.2671129-1-steven.price@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The iommu core calls the driver's detach_dev domain op callback only when
a device is finished assigning to user space and
iommu_group_release_dma_owner() is called to return the device to the
kernel, where iommu core wants to set the default domain to the device but
the driver didn't provide one.
In other words, if any iommu driver provides default domain support, the
.detach_dev callback will never be called. This removes the detach_dev
callbacks in those IOMMU drivers that support default domain.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev> # apple-dart
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> # sprd
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> # amd
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
As pointed out in the corresponding downstream fix [0], the permission bits
of the page table entries are compatible between v1 and v2 of the IOMMU.
This is in contrast to the current mainline code that incorrectly assumes
that the read and write permission bits are switched. Fix the permission
bits by reusing the v1 bit defines.
[0] https://github.com/rockchip-linux/kernel/commit/e3bc123a2260145e34b57454da3db0edd117eb8e
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221102063553.2464161-1-michael.riesch@wolfvision.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Clean up the remaining trivial bus_set_iommu() callsites along
with the implementation. Now drivers only have to know and care
about iommu_device instances, phew!
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ea383d5f4d74ffe200ab61248e5de6e95846180a.1660572783.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
'arm/smmu', 'x86/vt-d' and 'x86/amd' into next
|
|
Move the domain specific operations out of struct iommu_ops into a new
structure that only has domain specific operations. This solves the
problem of needing to know if the method vector for a given operation
needs to be retrieved from the device or the domain. Logically the domain
ops are the ones that make sense for external subsystems and endpoint
drivers to use, while device ops, with the sole exception of domain_alloc,
are IOMMU API internals.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
It's been a long time since there was any reason to register IOMMU
drivers early. Convert to the standard platform driver helper.
CC: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/c08d58bff340da6a829e76d66d2fa090a9718384.1644005728.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With the submission of iommu driver for RK3568 a subtle bug was
introduced: PAGE_DESC_HI_MASK1 and PAGE_DESC_HI_MASK2 have to be
the other way arround - that leads to random errors, especially when
addresses beyond 32 bit are used.
Fix it.
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Dan Johansen <strit@manjaro.org>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20211124021325.858139-1-knaerzche@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The core code bakes its own cookies now.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/aff51e2da1e431987ae5fdafa62a6a7c4bd042dc.1628682048.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Restore bits 39 to 32 at correct position.
It reverses the operation done in rk_dma_addr_dte_v2().
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20210712101232.318589-1-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
'x86/amd', 'virtio' and 'core' into next
|
|
This second version of the hardware block has a different bits
mapping for page table entries.
Add the ops matching to this new mapping.
Define a new compatible to distinguish it from the first version.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-5-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add internal ops to be able to handle incoming variant v2.
The goal is to keep the overall structure of the framework but
to allow to add the evolution of this hardware block.
The ops are global for a SoC because iommu domains are not
attached to a specific devices if they are for a virtuel device like
drm. Use a global variable shouldn't be since SoC usually doesn't
embedded different versions of the iommu hardware block.
If that happen one day a WARN_ON will be displayed at probe time.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-4-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The only place of_iommu.h is needed is in drivers/of/device.c. Remove it
from everywhere else.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210527193710.1281746-2-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When we allocate new pagetable pages, we don't modify them between the
initial dma_map_single() call and the dma_sync_single_for_device() call
via rk_iommu_flush(), so the latter is entirely pointless.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5c29a9ff0a20df0167635b1901f94b5195c1fb28.1621604979.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-6-joro@8bytes.org
|
|
Convert the Rockchip IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-26-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
'arm/mediatek', 'arm/tegra', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next
|
|
Although we don't generally expect IRQs to fire for a suspended IOMMU,
there are certain situations (particularly with debug options) where
we might legitimately end up with the pm_runtime_get_if_in_use() call
from rk_iommu_irq() returning 0. Since this doesn't represent an actual
error, follow the other parts of the driver and save the WARN_ON()
condition for a genuine negative value. Even if we do have spurious
IRQs due to a wedged VOP asserting the shared line, it's not this
driver's job to try to second-guess the IRQ core to warn about that.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU domain resource life is well-defined, managed
by .domain_alloc and .domain_free.
Therefore, domain-specific resources shouldn't be tied to
the device life, but instead to its domain.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Till now the Rockchip iommu driver walked through the irq list via
platform_get_irq() until it encountered an ENXIO error. With the
recent change to add a central error message, this always results
in such an error for each iommu on probe and shutdown.
To not confuse people, switch to platform_count_irqs() to get the
actual number of interrupts before walking through them.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add a gfp_t parameter to the iommu_ops::map function.
Remove the needless locking in the AMD iommu driver.
The iommu_ops::map function (or the iommu_map function which calls it)
was always supposed to be sleepable (according to Joerg's comment in
this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so
should probably have had a "might_sleep()" since it was written. However
currently the dma-iommu api can call iommu_map in an atomic context,
which it shouldn't do. This doesn't cause any problems because any iommu
driver which uses the dma-iommu api uses gfp_atomic in it's
iommu_ops::map function. But doing this wastes the memory allocators
atomic pools.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To allow IOMMU drivers to batch up TLB flushing operations and postpone
them until ->iotlb_sync() is called, extend the prototypes for the
->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to
the current iommu_iotlb_gather structure.
All affected IOMMU drivers are updated, but there should be no
functional change since the extra parameter is ignored for now.
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device links used by rockchip-iommu and exynos-iommu are
completely managed by these drivers within the IOMMU framework,
so there is no reason to involve the driver core in the management
of these links.
For this reason, make rockchip-iommu and exynos-iommu pass
DL_FLAG_STATELESS in flags to device_link_add(), so that the device
links used by them are stateless.
[Note that this change is requisite for a subsequent one that will
rework the management of stateful device links in the driver core
and it will not be compatible with the two drivers in question any
more.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config ROCKCHIP_IOMMU
drivers/iommu/Kconfig: bool "Rockchip IOMMU Support"
...meaning that it currently is not being built as a module by anyone.
The bind/unbind/remove was already explicitly disabled in commit
98b72b94def9 ("iommu/rockchip: Prohibit unbind and remove").
Lets remove the remaining traces of modular infrastructure, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simon Xue <xxm@rock-chips.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In the iommu's shutdown handler we disable runtime-pm which could
result in the irq-handler running unclocked and since commit
3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework")
we warn about that fact.
This can cause warnings on shutdown on some Rockchip machines, so
free the irqs in the shutdown handler before we disable runtime-pm.
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Fixes: 3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu/rockchip: Move irq request past pm_runtime_enable
iommu/rockchip: Handle errors returned from PM framework
arm64: rockchip: Force CONFIG_PM on Rockchip systems
ARM: rockchip: Force CONFIG_PM on Rockchip systems
arm64: dts: Fix various entry-method properties to reflect documentation
reset: imx7: Fix always writing bits as 0
reset: meson: add meson audio arb driver
reset: meson: add dt-bindings for meson-axg audio arb
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- PASID table handling updates for the Intel VT-d driver. It implements
a global PASID space now so that applications usings multiple devices
will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers to
export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and devices
not attached to any domain.
- Various cleanups and smaller fixes all over the place.
* tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
iommu/omap: Fix cache flushes on L2 table entries
iommu: Remove the ->map_sg indirection
iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel
iommu/arm-smmu-v3: Prevent any devices access to memory without registration
iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
iommu/ipmmu-vmsa: Clarify supported platforms
iommu/ipmmu-vmsa: Fix allocation in atomic context
iommu: Add config option to set passthrough as default
iommu: Add sysfs attribyte for domain type
iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
iommu/arm-smmu: Error out only if not enough context interrupts
iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
iommu/io-pgtable-arm: Fix pgtable allocation in selftest
iommu/vt-d: Remove the obsolete per iommu pasid tables
iommu/vt-d: Apply per pci device pasid table in SVA
iommu/vt-d: Allocate and free pasid table
iommu/vt-d: Per PCI device pasid table interfaces
iommu/vt-d: Add for_each_device_domain() helper
iommu/vt-d: Move device_domain_info to header
iommu/vt-d: Apply global PASID in SVA
...
|
|
Enabling the interrupt early, before power has been applied to the
device, can result in an interrupt being delivered too early if:
- the IOMMU shares an interrupt with a VOP
- the VOP has a pending interrupt (after a kexec, for example)
In these conditions, we end-up taking the interrupt without
the IOMMU being ready to handle the interrupt (not powered on).
Moving the interrupt request past the pm_runtime_enable() call
makes sure we can at least access the IOMMU registers. Note that
this is only a partial fix, and that the VOP interrupt will still
be screaming until the VOP driver kicks in, which advocates for
a more synchronized interrupt enabling/disabling approach.
Fixes: 0f181d3cf7d98 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
