| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
|
|
The adp5589 support is based on legacy platform data and there's no
upstream platform using this device.
Moreover, recently, with
commit
480a8ad683d7 ("mfd: adp5585: Add Analog Devices ADP5585 core support")
we overlapped support for the adp5585 device (gpiochip part of it) but
since it actually makes sense for the device to be supported under MFD, we
can complement it and add the keymap support for it (properly based on FW
properties). And that is what
commit
04840c5363a6 ("Input: adp5585: Add Analog Devices ADP5585/89 support")
is doing.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-17-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the keyboard function using the platform device
registered by the core MFD driver.
The ADP5589 has 19 pins and also features an unlock function.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-16-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
gpio_keys_irq_isr() and gpio_keys_irq_timer() access the same resources.
There could be a concurrent access if a GPIO interrupt occurs in parallel
of a HR timer interrupt.
Guard back those resources with a spinlock.
Fixes: 019002f20cb5 ("Input: gpio-keys - use hrtimer for release timer")
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-2-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in
hard irq context, but the input_event() takes a spin_lock, which isn't
allowed there as it is converted to a rt_spin_lock().
[ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0
...
[ 4054.290195] __might_resched+0x13c/0x1f4
[ 4054.290209] rt_spin_lock+0x54/0x11c
[ 4054.290219] input_event+0x48/0x80
[ 4054.290230] gpio_keys_irq_timer+0x4c/0x78
[ 4054.290243] __hrtimer_run_queues+0x1a4/0x438
[ 4054.290257] hrtimer_interrupt+0xe4/0x240
[ 4054.290269] arch_timer_handler_phys+0x2c/0x44
[ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c
[ 4054.290297] handle_irq_desc+0x40/0x58
[ 4054.290307] generic_handle_domain_irq+0x1c/0x28
[ 4054.290316] gic_handle_irq+0x44/0xcc
Considering the gpio_keys_irq_isr() can run in any context, e.g. it can
be threaded, it seems there's no point in requesting the timer isr to
run in hard irq context.
Relax the hrtimer not to use the hard context.
Fixes: 019002f20cb5 ("Input: gpio-keys - use hrtimer for release timer")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-1-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The keyboard is properly initialized by the firmware on Loongson
platform, so full reset of the keyboard is not needed. Switch the
default to avoid performing full reset of the keyboard.
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250401094154.11527-1-zhaoqunqin@loongson.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with mainline to bring in xpad controller changes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
|
|
The power-off time is configured in LPCR[17:16] BTN_PRESS_TIME:
* b00: 5 seconds (SoC default)
* b01: 10 seconds
* b10: 15 seconds
* b11: PMIC is not disabled
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://lore.kernel.org/r/20250315093455.1100-3-ian.ray@gehealthcare.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49aec ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
For a setup where the matrix keypad is connected over a slow interface
(e.g. a gpio-expansion over i2c), the scan can take a longer time to read.
Interrupts need to be disabled during scan. And therefore changes in this
period are not detected.
To improve this situation, scan the matrix again if the row state changed
during interrupts disabled.
The rescan is repeated until no change is detected anymore.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-4-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Move the evaluation of a row state into separate function.
It will be also used by a change later in this series.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-2-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Coccinelle scripted cleanup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The delay is specified in a device property, so the duration can be
arbitrarily large. fsleep() determines the best way of delaying (sleep
vs spin) based on duration.
see Documentation/timers/delay_sleep_functions.rst
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-2-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Matrix keypads with high capacity need a longer settle time after
enabling all columns before re-enabling interrupts. The delay gives
the system time to settle and avoids spurious interrupts.
Add a new optional device property to configure the delay after
enabling all columns. The default is no delay.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-7-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/62db561622799dfc8d58682ca41b54e3f1ff6949.1738746904.git.namcao@linutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114192701.912430-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
|
|
Prepare input updates for 6.13 merge window.
|
|
We can reduce boilerplate code by using
devm_regulator_get_enable_read_voltage().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20241119-input-mpr121-regulator-get-enable-read-voltage-v3-1-1d8ee5c22f6c@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-7-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-6-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
'struct i2c_device_id' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
6438 618 0 7056 1b90 drivers/input/keyboard/cypress-sf.o
After:
=====
text data bss dec hex filename
6502 554 0 7056 1b90 drivers/input/keyboard/cypress-sf.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4bc3e3b4d10223d9df850fe4ba48f1cefd197082.1731689418.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Avoid using GPIOF_ACTIVE_LOW as it's deprecated and subject to remove.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241104093609.156059-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Avoid using GPIOF_ACTIVE_LOW as it's deprecated and subject to remove.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241104093609.156059-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/Zx8mGiWOw1Av28TX@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/Zxr4AMJrzhZlHAlf@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/Zxr30BpPobpM65vO@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
|
|
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/Zxr4nF-igbrmgq85@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Commit dc748812fca0 ("Input: adp5588-keys - add support for pure gpio")
made having interrupt line optional for the device, however it neglected
to update suspend and resume handlers that try to disable interrupts
for the duration of suspend.
Fix this by checking if interrupt number assigned to the i2c device is
not 0 before trying to disable or reenable it.
Fixes: dc748812fca0 ("Input: adp5588-keys - add support for pure gpio")
Link: https://lore.kernel.org/r/Zv_2jEMYSWDw2gKs@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-3-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-2-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-1-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/input/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in a few drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241008090009.462836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The header files consumer.h is included twice in matrix_keypad.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10823
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240910010133.44579-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Link: https://lore.kernel.org/r/20240825051627.2848495-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Link: https://lore.kernel.org/r/20240825051627.2848495-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Link: https://lore.kernel.org/r/20240825051627.2848495-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Link: https://lore.kernel.org/r/20240825051627.2848495-14-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
