| Age | Commit message (Collapse) | Author |
|---|
|
After the last patch removing vlan_rwsem, it is an incremental step to
allow ipoib to work with netdevs that require the instance lock.
In several places, netdev_lock() is changed to netdev_lock_ops_to_full()
which takes care of not acquiring the lock again when the netdev is
already locked.
In ipoib_ib_tx_timeout_work() and __ipoib_ib_dev_flush() for HEAVY
flushes, the netdev lock is acquired/released. This is needed because
these functions end up calling .ndo_stop()/.ndo_open() on subinterfaces,
and the device may expect the netdev instance lock to be held.
ipoib_set_mode() now explicitly acquires ops lock while manipulating the
features, mtu and tx queues.
Finally, ipoib_napi_enable()/ipoib_napi_disable() now use the *_locked
variants of the napi_enable()/napi_disable() calls and optionally
acquire the netdev lock themselves depending on the dev they operate on.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vlan_rwsem was added more than a decade ago to work around a deadlock
involving the original mutex being acquired twice, once from the wq.
Subsequent changes then tweaked it to partially protect access to
ipoib_dev_priv->child_intfs together with the RTNL. Flushing the wq
synchronously was also since then refactored to happen separately.
This semaphore unfortunately prevents updating ipoib to work with
devices that require the netdev lock, because of lock ordering issues
between RTNL, vlan_rwsem and the netdev instance locks of parent and
child devices.
To uncomplicate things, this commit replaces vlan_rwsem with the netdev
instance lock of the parent device. Both parent child_intfs list and the
children's list membership in it require holding the parent netdev
instance lock.
All call paths were carefully reviewed and no-longer-needed ASSERT_RTNL
calls were dropped. Some non-trivial changes:
- ipoib_match_gid_pkey_addr() now only acquires the instance lock and
iterates through child_intfs for the first level of recursion (the
parent), as it's not possible to have multiple levels of nested
subinterfaces.
- ipoib_open() and ipoib_stop() schedule tasks on the global workqueue
to open/stop child interfaces to avoid potentially acquiring nested
netdev instance locks. To avoid the device going away between the task
scheduling and execution, netdev_hold/netdev_put are used.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, flushing a netdevice involved first flushing all child
devices from the flush task itself. That requires holding the lock that
protects the list for the entire duration of the flush.
This poses a problem when converting from vlan_rwsem to the netdev
instance lock (next patch), because holding the parent lock while
trying to acquire a child lock makes lockdep unhappy, rightfully.
Fix this by splitting a big flush task into individual flush tasks
(all are already created in their respective ipoib_dev_priv structs)
and defining a helper function to enqueue all of them while holding the
list lock.
In ipoib_set_mac, the function is not used and the task is enqueued
directly, because in the subsequent patches locking is changed and this
function may be called with the netdev instance lock held.
This is effectively a noop, the wq is single-threaded and ordered and
will execute the same flush operations in the same order as before.
Furthermore, there should be no new races because
ipoib_parent_unregister_pre() calls flush_workqueue() after stopping new
work generation to wait for pending work to complete. flush_workqueue()
waits for all currently enqueued work to finish before returning.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we sometime run into TX timeout from IPoIB, queue seems stopped
and can't recover. Diff with Mellanox OFED show Mellanox driver
has timeout work to recover in such case.
Add TX timeout work/NAPI work to recover such case.
Also increase the watchdog_timeo to 10 seconds, so more tolerant to
error.
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231121130316.126364-3-jinpu.wang@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Now that napi_schedule return a bool, we can drop napi_reschedule that
does the same exact function. The function comes from a very old commit
bfe13f54f502 ("ibm_emac: Convert to use napi_struct independent of struct
net_device") and the purpose is actually deprecated in favour of
different logic.
Convert every user of napi_reschedule to napi_schedule.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # ath10k
Acked-by: Nick Child <nnac123@linux.ibm.com> # ibm
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for can/dev/rx-offload.c
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud
environment. Otherwise the changes are dominated by rxe fixes.
There is another RDMA driver on the list that might get merged next
cycle, 'MANA' for the Azure cloud environment.
Summary:
- Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5
- General spelling/grammer fixes
- rdma cm can follow changes in neighbours for control packets
- Significant amounts of rxe fixes and spec compliance changes
- Use the modern NAPI API
- Use the bitmap API instead of open coding
- Performance improvements for rtrs
- Add the ERDMA driver for Alibaba cloud
- Fix a use after free bug in SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv()
RDMA/rxe: Fix error unwind in rxe_create_qp()
RDMA/mlx5: Add missing check for return value in get namespace flow
RDMA/rxe: Split qp state for requester and completer
RDMA/rxe: Generate error completion for error requester QP state
RDMA/rxe: Update wqe_index for each wqe error completion
RDMA/srpt: Fix a use-after-free
RDMA/srpt: Introduce a reference count in struct srpt_device
RDMA/srpt: Duplicate port name members
IB/qib: Fix repeated "in" within comments
RDMA/erdma: Add driver to kernel build environment
RDMA/erdma: Add the ABI definitions
RDMA/erdma: Add the erdma module
RDMA/erdma: Add connection management (CM) support
RDMA/erdma: Add verbs implementation
RDMA/erdma: Add verbs header file
RDMA/erdma: Add event queue implementation
RDMA/erdma: Add cmdq implementation
RDMA/erdma: Add main include file
RDMA/erdma: Add the hardware related definitions
...
|
|
Replace 'the the' with 'the' in the comments.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.
Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of
VLANs...") introduced a rbtree for faster Ethernet address look up. To
maintain netdev->dev_addr in this tree we need to make all the writes to
it got through appropriate helpers.
Link: https://lore.kernel.org/r/20211019182604.1441387-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ipoib_mcast_carrier_on_task() insanely open codes a rtnl_lock() such that
the only time flush_workqueue() can be called is if it also clears
IPOIB_FLAG_OPER_UP.
Thus the flush inside ipoib_flush_ah() will deadlock if it gets unlucky
enough, and lockdep doesn't help us to find it early:
CPU0 CPU1 CPU2
__ipoib_ib_dev_flush()
down_read(vlan_rwsem)
ipoib_vlan_add()
rtnl_trylock()
down_write(vlan_rwsem)
ipoib_mcast_carrier_on_task()
while (!rtnl_trylock())
msleep(20);
ipoib_flush_ah()
flush_workqueue(priv->wq)
Clean up the ah_reaper related functions and lifecycle to make sense:
- Start/Stop of the reaper should only be done in open/stop NDOs, not in
any other places
- cancel and flush of the reaper should only happen in the stop NDO.
cancel is only functional when combined with IPOIB_STOP_REAPER.
- Non-stop places were flushing the AH's just need to flush out dead AH's
synchronously and ignore the background task completely. It is fully
locked and harmless to leave running.
Which ultimately fixes the ABBA deadlock by removing the unnecessary
flush_workqueue() from the problematic place under the vlan_rwsem.
Fixes: efc82eeeae4e ("IB/ipoib: No longer use flush as a parameter")
Link: https://lore.kernel.org/r/20200625174219.290842-1-kamalheib1@gmail.com
Reported-by: Kamal Heib <kheib@redhat.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The return value from ipoib_ib_dev_stop() is always 0 - change it to be
void.
Link: https://lore.kernel.org/r/20200623105236.18683-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When connected mode is set, and we have connected and datagram traffic in
parallel, ipoib might crash with double free of datagram skb.
The current mechanism assumes that the order in the completion queue is
the same as the order of sent packets for all QPs. Order is kept only for
specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and
few CM's) in parallel.
The problem:
----------------------------------------------------------
Transmit queue:
-----------------
UD skb pointer kept in queue itself, CM skb kept in spearate queue and
uses transmit queue as a placeholder to count the number of total
transmitted packets.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127
------------------------------------------------------------
NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
^ ^
tail head
Completion queue (problematic scenario) - the order not the same as in
the transmit queue:
1 2 3 4 5 6 7 8 9
------------------------------------
ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5
------------------------------------
1. CM1 'wc' processing
- skb freed in cm separate ring.
- tx_tail of transmit queue increased although UD2 is not freed.
Now driver assumes UD2 index is already freed and it could be used for
new transmitted skb.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127
------------------------------------------------------------
NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
^ ^ ^
(Bad)tail head
(Bad - Could be used for new SKB)
In this case (due to heavy load) UD2 skb pointer could be replaced by new
transmitted packet UD_NEW, as the driver assumes its free. At this point
we will have to process two 'wc' with same index but we have only one
pointer to free.
During second attempt to free the same skb we will have NULL pointer
exception.
2. UD2 'wc' processing
- skb freed according the index we got from 'wc', but it was already
overwritten by mistake. So actually the skb that was released is the
skb of the new transmitted packet and not the original one.
3. UD_NEW 'wc' processing
- attempt to free already freed skb. NUll pointer exception.
The fix:
-----------------------------------------------------------------------
The fix is to stop using the UD ring as a placeholder for CM packets, the
cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a
new cyclic variables global_tx_head and global_tx_tail are introduced for
managing and counting the overall outstanding sent packets, then the send
queue will be stopped and waken based on these variables only.
Note that no locking is needed since global_tx_head is updated in the xmit
flow and global_tx_tail is updated in the NAPI flow only. A previous
attempt tried to use one variable to count the outstanding sent packets,
but it did not work since xmit and NAPI flows can run at the same time and
the counter will be updated wrongly. Thus, we use the same simple cyclic
head and tail scheme that we have today for the UD tx_ring.
Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes")
Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.org
Signed-off-by: Valentine Fatiev <valentinef@mellanox.com>
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Use accessor functions for skb fragment's page_offset instead
of direct references, in preparation for bvec conversion.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drop LIST_HEAD where the variable it declares is never used.
Commit 31c02e215700 ("IPoIB: Avoid using stale last_send counter
when reaping AHs") removed the uses, but not the declaration.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>
Fixes: 31c02e215700 ("IPoIB: Avoid using stale last_send counter when reaping AHs")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce a 'flags' field to destroy address handle callback and add a
flag that marks whether the callback is executed in an atomic context or
not.
This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic context or not.
This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Make sure to use sizeof(...) instead of sizeof ... which is more
preferred.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This commit replaces all the unsigned definitions in favour of 'unsigned
int' which is preferred.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
If the gid_attr argument is NULL then the functions behave identically to
rdma_query_gid. ib_query_gid just calls ib_get_cached_gid, so everything
can be consolidated to one function.
Now that all callers either use rdma_query_gid() or ib_get_cached_gid(),
ib_query_gid() API is removed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table
entries are not based on netdevice. Netdevice parameter is unused here.
Therefore, it is removed.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
If IB_CQ_REPORT_MISSED_EVENTS flag is passed in ib_req_notify_cq()
it may return positive value indicating non-empty CQ.
If return code not verified the log might be flooded with false
warning messages "request notify on send CQ failed".
Fixes: 8966e28d2e40 ("IB/ipoib: Use NAPI in UD/TX flows")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
Patches for 4.16 that are dependent on patches sent to 4.15-rc.
These are small clean ups for the vmw_pvrdma and i40iw drivers.
* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
i40iw: Change accelerated flag to bool
|
|
The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B),
contradicts other flows such as ipoib_open possibly causing a deadlock.
To prevent this deadlock heavy flush is called with RTNL locked and
only then tries to acquire vlan_rwsem.
This deadlock is possible only when there are child interfaces.
[ 140.941758] ======================================================
[ 140.946276] WARNING: possible circular locking dependency detected
[ 140.950950] 4.15.0-rc1+ #9 Tainted: G O
[ 140.954797] ------------------------------------------------------
[ 140.959424] kworker/u32:1/146 is trying to acquire lock:
[ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 140.970006]
but task is already holding lock:
[ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib]
[ 140.982105]
which lock already depends on the new lock.
[ 140.990023]
the existing dependency chain (in reverse order) is:
[ 140.998650]
-> #1 (&priv->vlan_rwsem){++++}:
[ 141.005276] down_read+0x4d/0xb0
[ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib]
[ 141.014400] __dev_open+0xcb/0x140
[ 141.017919] __dev_change_flags+0x1a4/0x1e0
[ 141.022133] dev_change_flags+0x23/0x60
[ 141.025695] devinet_ioctl+0x704/0x7d0
[ 141.029156] sock_do_ioctl+0x20/0x50
[ 141.032526] sock_ioctl+0x221/0x300
[ 141.036079] do_vfs_ioctl+0xa6/0x6d0
[ 141.039656] SyS_ioctl+0x74/0x80
[ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96
[ 141.046891]
-> #0 (rtnl_mutex){+.+.}:
[ 141.051701] lock_acquire+0xd4/0x220
[ 141.055212] __mutex_lock+0x88/0x970
[ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib]
[ 141.067648] process_one_work+0x1f5/0x610
[ 141.071429] worker_thread+0x4a/0x3f0
[ 141.074890] kthread+0x141/0x180
[ 141.078085] ret_from_fork+0x24/0x30
[ 141.081559]
other info that might help us debug this:
[ 141.088967] Possible unsafe locking scenario:
[ 141.094280] CPU0 CPU1
[ 141.097953] ---- ----
[ 141.101640] lock(&priv->vlan_rwsem);
[ 141.104771] lock(rtnl_mutex);
[ 141.109207] lock(&priv->vlan_rwsem);
[ 141.114032] lock(rtnl_mutex);
[ 141.116800]
*** DEADLOCK ***
Fixes: b4b678b06f6e ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Currently there are no users of ib_find_gid for RoCE transport. It is
only used by IPoIB.
Therefore its simplified to ignore RoCE ports and GID type check which
was previously done for every port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Instead of explicit call to poll_cq of the tx ring, use the NAPI mechanism
to handle the completions of each packet that has been sent to the HW.
The next major changes were taken:
* The driver init completion function in the creation of the send CQ,
that function triggers the napi scheduling.
* The driver uses CQ for RX for both modes UD and CM, and CQ for TX
for CM and UD.
Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The first step toward using NAPI in the UD/TX flow is to separate
between two flows, the NAPI and the xmit, meaning no use of shared
variables between both flows.
This patch takes out the tx_outstanding variable that was used in both
flows and instead the driver uses the 2 cyclic ring variables: tx_head
and tx_tail, tx_head used in the xmit flow and tx_tail in the NAPI flow.
Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Conflicts:
drivers/infiniband/hw/cxgb4/cm.c
drivers/infiniband/hw/qib/qib_driver.c
drivers/infiniband/hw/qib/qib_mad.c
There were minor fixups needed in these files. Just minor context diffs
due to patches from independent sources touching the same basic area.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The early for-next branch was based on v4.14-rc2, while the shared pull
request I got from Mellanox used a v4.14-rc4 base. I'm making the
branch that was the shared Mellanox pull request the new for-next branch
and merging the early for-next branch into it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
To support passing child interfaces to the lower device a new
rdma_netdev function was used, set_id. This will allow us to
attach the PKEY index lower device resources such as TIS/QP.
For devices that do not support offloads in IPoIB same logic
will be used, setting the PKEY index to priv struct.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
|
|
When ndo_open and ndo_stop are called RTNL lock should be held.
In this specific case ipoib_ib_dev_open calls the offloaded ndo_open
which re-sets the number of TX queue assuming RTNL lock is held.
Since RTNL lock is not held, RTNL assert will fail.
Signed-off-by: Alex Vesker <valex@mellanox.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Alex Vesker <valex@mellanox.com>
Cc: Erez Shitrit <erezsh@mellanox.com>
Cc: Zhu Yanjun <yanjun.zhu@oracle.com>
Cc: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Yuval Shaia <yuval.shaia@oracle.com>
Cc: linux-rdma@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Vendor error print should be consistent across protocols to avoid any
confusion.
This patch corrects that.
Suggested-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
commit 9a9b8112699d will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.
IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
if (priv->broadcast) {
rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
list_add_tail(&priv->broadcast->list, &remove_list);
priv->broadcast = NULL;
}
...
then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
broadcast = ipoib_mcast_alloc(dev, 0);
...
memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid));
priv->broadcast = broadcast;
...
Fixes: 9a9b8112699d ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Modify QP can fail and it can be acceptable, like when moving from RST to
ERR state, all the rest are not acceptable and a message to the log
should be printed.
The current code prints on all failures and many messages like:
"Failed to modify QP to ERROR state" appear, even when supported by the
state machine of the QP object.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Update the multicast counter when multicast packets are received and
provide this information through ethtool support.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The msleep(1) may do not sleep 1 ms as expected
and will sleep longer. The simple conversion from
msleep to usleep_range between 1ms and 2ms can solve an
issue.
The full and comprehensive explanation can be found at [1] and [2].
[1] https://lkml.org/lkml/2007/8/3/250
[2] Documentation/timers/timers-howto.txt
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There is no need to re-enable napi since we set the initialized
flag before calling ipoib_ib_dev_stop which will disable napi,
disabling napi twice is harmless in case it was already disabled.
One more reason for this fix is that when using IPoIB new device
driver napi is not added to priv, this can lead to kernel panic
when rn_ops ndo_open fails.
[ 289.755840] invalid opcode: 0000 [#1] SMP
[ 289.757111] task: ffff880036964440 ti: ffff880178ee8000 task.ti: ffff880178ee8000
[ 289.757111] RIP: 0010:[<ffffffffa05368d6>] [<ffffffffa05368d6>] napi_enable.part.24+0x4/0x6 [ib_ipoib]
[ 289.757111] RSP: 0018:ffff880178eeb6d8 EFLAGS: 00010246
[ 289.757111] RAX: 0000000000000000 RBX: ffff880177a80010 RCX: 000000007fffffff
[ 289.757111] RDX: ffffffff81d5f118 RSI: 0000000000000000 RDI: ffff880177a80010
[ 289.757111] RBP: ffff880178eeb6d8 R08: 0000000000000082 R09: 0000000000000283
[ 289.757111] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175a00000
[ 289.757111] R13: ffff880177a80080 R14: 0000000000000000 R15: 0000000000000001
[ 289.757111] FS: 00007fe2ee346880(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000
[ 289.757111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 289.757111] CR2: 00007fffca979020 CR3: 00000001792e4000 CR4: 00000000000006f0
[ 289.757111] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 289.757111] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 289.757111] Stack:
[ 289.796027] ffff880178eeb6f0 ffffffffa05251f5 ffff880177a80000 ffff880178eeb718
[ 289.796027] ffffffffa0528505 ffff880175a00000 ffff880177a80000 0000000000000000
[ 289.796027] ffff880178eeb748 ffffffffa051f0ab ffff880175a00000 ffffffffa0537d60
[ 289.796027] Call Trace:
[ 289.796027] [<ffffffffa05251f5>] napi_enable+0x25/0x30 [ib_ipoib]
[ 289.796027] [<ffffffffa0528505>] ipoib_ib_dev_open+0x175/0x190 [ib_ipoib]
[ 289.796027] [<ffffffffa051f0ab>] ipoib_open+0x4b/0x160 [ib_ipoib]
[ 289.796027] [<ffffffff814fe33f>] _dev_open+0xbf/0x130
[ 289.796027] [<ffffffff814fe62d>] __dev_change_flags+0x9d/0x170
[ 289.796027] [<ffffffff814fe729>] dev_change_flags+0x29/0x60
[ 289.796027] [<ffffffff8150caf7>] do_setlink+0x397/0xa40
Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename ib_create_ah to rdma_create_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Update the broadcast address in the priv->broadcast object when the
Pkey value changes in index 0, otherwise the multicast GID value will
keep the previous value of the PKey, and will not be updated.
This leads to interface state down because the interface will keep the
old PKey value.
For example, in SR-IOV environment, if the PF changes the value of PKey
index 0 for one of the VFs, then the VF receives PKey change event that
triggers heavy flush. This flush calls update_parent_pkey that update the
broadcast object and its relevant members. If in this case the multicast
GID will not be updated, the interface state will be down.
Fixes: c2904141696e ("IPoIB: Fix pkey change flow for virtualization environments")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
IPoIB driver now uses the new set of callback functions.
If the hardware provider supports the new ipoib_options implementation,
the driver uses the callbacks in its data path flows, otherwise it uses the
driver default implementation for all data flows in its code.
The default implementation wasn't change and it is exactly as it was before
introduction of acceleration support.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Make ipoib_priv point to netdev_priv where the code calls netdev_priv.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Change of function parameter name from qpn to be dqpn.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch is preparing the netdev part at the IPoIB driver to be able
to use the ipoib_options.
It deals with the two flows from the .ndo: ipoib_open and ipoib_stop.
The code is rearranged as follows:
* All operations which deal with the hardware resources, (for example
change QP state, post-receive etc.) are performed in one place.
* All operations that are control oriented (like restart multicast task,
start the reap_ah etc.) are performed in separate place.
The functions that deal with the hardware resources now located at
__ipoib_ib_dev_open for the ipoib_open flow and __ipoib_ib_dev_stop
for ipoib_stop.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch prepares init and teardown flows so we can call them
through ipoib_options function pointers.
It arranges that area of code as the following:
* All operations which deal with the resource allocation/deletion
are performed in one place.
* All operations that are control oriented, meaning that they are not
connected to a specific hardware, are performed in a separate place.
The operations for allocation of hardware resources are now in the
function ipoib_dev_init_default, and the deletion of all the resources
are in ipoib_dev_uninit_default
The only exception is the creation of the PD object,
which is used both for resource allocation (create QP etc.)
and for control flows like creating AH.
It also does:
* Move creation of rx_ring and tx_ring to be in the resources
allocation area.
* Move the function ipoib_ib_dev_open that does the open device
to the control area instead of the dev_init which creates resources.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The function ipoib_mcast_start_thread/ipoib_ib_dev_up always return zero.
As such, in the function ipoib_open, err_stop will never be reached.
So remove this err_stop and change the return type of the function
ipoib_mcast_start_thread/ipoib_ib_dev_up to void.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The ipoib_ib_dev_down/ipoib_ib_dev_stop return zero unconditionally
and the callers never check the returned values,
change the return type to void and remove the redundant return values.
Reviewed-by: Shan Hai <shan.hai@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
