| Age | Commit message (Collapse) | Author |
|---|
|
Upon RQ destruction if the firmware command fails which is the
last resource to be destroyed some SW resources were already cleaned
regardless of the failure.
Now properly rollback the object to its original state upon such failure.
In order to avoid a use-after free in case someone tries to destroy the
object again, which results in the following kernel trace:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 37589 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148
Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) rfkill mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) psample mlxfw(OE) mlx_compat(OE) macsec tls pci_hyperv_intf sunrpc vfat fat virtio_net net_failover failover fuse loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_console virtio_gpu virtio_blk virtio_dma_buf virtio_mmio dm_mirror dm_region_hash dm_log dm_mod xpmem(OE)
CPU: 0 UID: 0 PID: 37589 Comm: python3 Kdump: loaded Tainted: G OE ------- --- 6.12.0-54.el10.aarch64 #1
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : refcount_warn_saturate+0xf4/0x148
lr : refcount_warn_saturate+0xf4/0x148
sp : ffff80008b81b7e0
x29: ffff80008b81b7e0 x28: ffff000133d51600 x27: 0000000000000001
x26: 0000000000000000 x25: 00000000ffffffea x24: ffff00010ae80f00
x23: ffff00010ae80f80 x22: ffff0000c66e5d08 x21: 0000000000000000
x20: ffff0000c66e0000 x19: ffff00010ae80340 x18: 0000000000000006
x17: 0000000000000000 x16: 0000000000000020 x15: ffff80008b81b37f
x14: 0000000000000000 x13: 2e656572662d7265 x12: ffff80008283ef78
x11: ffff80008257efd0 x10: ffff80008283efd0 x9 : ffff80008021ed90
x8 : 0000000000000001 x7 : 00000000000bffe8 x6 : c0000000ffff7fff
x5 : ffff0001fb8e3408 x4 : 0000000000000000 x3 : ffff800179993000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000133d51600
Call trace:
refcount_warn_saturate+0xf4/0x148
mlx5_core_put_rsc+0x88/0xa0 [mlx5_ib]
mlx5_core_destroy_rq_tracked+0x64/0x98 [mlx5_ib]
mlx5_ib_destroy_wq+0x34/0x80 [mlx5_ib]
ib_destroy_wq_user+0x30/0xc0 [ib_core]
uverbs_free_wq+0x28/0x58 [ib_uverbs]
destroy_hw_idr_uobject+0x34/0x78 [ib_uverbs]
uverbs_destroy_uobject+0x48/0x240 [ib_uverbs]
__uverbs_cleanup_ufile+0xd4/0x1a8 [ib_uverbs]
uverbs_destroy_ufile_hw+0x48/0x120 [ib_uverbs]
ib_uverbs_close+0x2c/0x100 [ib_uverbs]
__fput+0xd8/0x2f0
__fput_sync+0x50/0x70
__arm64_sys_close+0x40/0x90
invoke_syscall.constprop.0+0x74/0xd0
do_el0_svc+0x48/0xe8
el0_svc+0x44/0x1d0
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x1a4/0x1a8
Fixes: e2013b212f9f ("net/mlx5_core: Add RQ and SQ event handling")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/3181433ccdd695c63560eeeb3f0c990961732101.1745839855.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This patch supports driver APIs "add_sub_dev" and "del_sub_dev", to
add and delete a plane device respectively.
A mlx5 plane device is a rdma SMI device; It provides the SMI capability
through user MAD for it's parent, the logical multi-plane aggregated
device. For a plane port:
- It supports QP0 only;
- When adding a plane device, all plane ports are added;
- For some commands like mad_ifc, both plane_index and native portnum
is needed;
- When querying or modifying a plane port context, the native portnum
must be used, as the query/modify_hca_vport_context command doesn't
support plane port.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/e933cd0562aece181f8657af2ca0f5b387d0f14e.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Previously when destroying a QP/RQ, the result of the firmware
destruction function was ignored and upper layers weren't informed
about the failure.
Which in turn could lead to various problems since when upper layer
isn't aware of the failure it continues its operation thinking that the
related QP/RQ was successfully destroyed while it actually wasn't,
which could lead to the below kernel WARN.
Currently, we return the correct firmware destruction status to upper
layers which in case of the RQ would be mlx5_ib_destroy_wq() which
was already capable of handling RQ destruction failure or in case of
a QP to destroy_qp_common(), which now would actually warn upon qp
destruction failure.
WARNING: CPU: 3 PID: 995 at drivers/infiniband/core/rdma_core.c:940 uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs]
Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse
CPU: 3 PID: 995 Comm: python3 Not tainted 5.16.0-rc5+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs]
Code: 41 5c 41 5d 41 5e e9 44 34 f0 e0 48 89 df e8 4c 77 ff ff 49 8b 86 10 01 00 00 48 85 c0 74 a1 4c 89 e7 ff d0 eb 9a 0f 0b eb c1 <0f> 0b be 04 00 00 00 48 89 df e8 b6 f6 ff ff e9 75 ff ff ff 90 0f
RSP: 0018:ffff8881533e3e78 EFLAGS: 00010287
RAX: ffff88811b2cf3e0 RBX: ffff888106209700 RCX: 0000000000000000
RDX: ffff888106209780 RSI: ffff8881533e3d30 RDI: ffff888109b101a0
RBP: 0000000000000001 R08: ffff888127cb381c R09: 0de9890000000009
R10: ffff888127cb3800 R11: 0000000000000000 R12: ffff888106209780
R13: ffff888106209750 R14: ffff888100f20660 R15: 0000000000000000
FS: 00007f8be353b740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8bd5b117c0 CR3: 000000012cd8a004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ib_uverbs_close+0x1a/0x90 [ib_uverbs]
__fput+0x82/0x230
task_work_run+0x59/0x90
exit_to_user_mode_prepare+0x138/0x140
syscall_exit_to_user_mode+0x1d/0x50
? __x64_sys_close+0xe/0x40
do_syscall_64+0x4a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f8be3ae0abb
Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 83 43 f9 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 c1 43 f9 ff 8b 44
RSP: 002b:00007ffdb51909c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000557bb7f7c020 RCX: 00007f8be3ae0abb
RDX: 0000557bb7c74010 RSI: 0000557bb7f14ca0 RDI: 0000000000000005
RBP: 0000557bb7fbd598 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 0000557bb7fbd5b8
R13: 0000557bb7fbd5a8 R14: 0000000000001000 R15: 0000557bb7f7c020
</TASK>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/c6df677f931d18090bafbe7f7dbb9524047b7d9b.1685953497.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Previously when destroying a DCT, if the firmware function for the
destruction failed, the common resource would have been destroyed
either way, since it was destroyed before the firmware object.
Which leads to kernel warning "refcount_t: underflow" which indicates
possible use-after-free.
Which is triggered when we try to destroy the common resource for the
second time and execute refcount_dec_and_test(&common->refcount).
So, let's fix the destruction order by factoring out the DCT QP logic
to be in separate XArray database.
refcount_t: underflow; use-after-free.
WARNING: CPU: 8 PID: 1002 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0
Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse
CPU: 8 PID: 1002 Comm: python3 Not tainted 5.16.0-rc5+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0xd8/0xe0
Code: ff 48 c7 c7 18 f5 23 82 c6 05 60 70 ff 00 01 e8 d0 0a 45 00 0f 0b c3 48 c7 c7 c0 f4 23 82 c6 05 4c 70 ff 00 01 e8 ba 0a 45 00 <0f> 0b c3 0f 1f 44 00 00 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13
RSP: 0018:ffff8881221d3aa8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8881313e8d40 RCX: ffff88852cc1b5c8
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff88852cc1b5c0
RBP: ffff888100f70000 R08: ffff88853ffd1ba8 R09: 0000000000000003
R10: 00000000fffff000 R11: 3fffffffffffffff R12: 0000000000000246
R13: ffff888100f71fa0 R14: ffff8881221d3c68 R15: 0000000000000020
FS: 00007efebbb13740(0000) GS:ffff88852cc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005611aac29f80 CR3: 00000001313de004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
destroy_resource_common+0x6e/0x95 [mlx5_ib]
mlx5_core_destroy_rq_tracked+0x38/0xbe [mlx5_ib]
mlx5_ib_destroy_wq+0x22/0x80 [mlx5_ib]
ib_destroy_wq_user+0x1f/0x40 [ib_core]
uverbs_free_wq+0x19/0x40 [ib_uverbs]
destroy_hw_idr_uobject+0x18/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x2f/0x190 [ib_uverbs]
uobj_destroy+0x3c/0x80 [ib_uverbs]
ib_uverbs_cmd_verbs+0x3e4/0xb80 [ib_uverbs]
? uverbs_free_wq+0x40/0x40 [ib_uverbs]
? ip_list_rcv+0xf7/0x120
? netif_receive_skb_list_internal+0x1b6/0x2d0
? task_tick_fair+0xbf/0x450
? __handle_mm_fault+0x11fc/0x1450
ib_uverbs_ioctl+0xa4/0x110 [ib_uverbs]
__x64_sys_ioctl+0x3e4/0x8e0
? handle_mm_fault+0xb9/0x210
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7efebc0be17b
Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe71813e78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe71813fb8 RCX: 00007efebc0be17b
RDX: 00007ffe71813fa0 RSI: 00000000c0181b01 RDI: 0000000000000005
RBP: 00007ffe71813f80 R08: 00005611aae96020 R09: 000000000000004f
R10: 00007efebbf9ffa0 R11: 0000000000000246 R12: 00007ffe71813f80
R13: 00007ffe71813f4c R14: 00005611aae2eca0 R15: 00007efeae6c89d0
</TASK>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4470888466c8a898edc9833286967529cc5f3c0d.1685953497.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Print syndromes in case of fatal QP events. This is helpful for upper
level debugging, as there maybe no CQEs.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/edc794f622a33e4ee12d7f5d218d1a59aa7c6af5.1672821186.git.leonro@nvidia.com
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Move the call of qp event handler from atomic to workqueue context,
so that the handler is able to block. This is needed by following
patches.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/0cd17b8331e445f03942f4bb28d447f24ac5669d.1672821186.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
mlx5_core_create_{cq/dct} functions are non-trivial mlx5 commands
functions. They check command execution status themselves and hide
valuable FW failure information.
For mlx5_core/eth kernel user this is what we actually want, but for a
devx/rdma user the hidden information is essential and should be propagated
up to the caller, thus we convert these commands to use mlx5_cmd_do
to return the FW/driver and command outbox status as is, and let the caller
decide what to do with it.
For kernel callers of mlx5_core_create_{cq/dct} or those who only care about
the binary status (FAIL/SUCCESS) they must check status themselves via
mlx5_cmd_check() to restore the current behavior.
err = mlx5_create_cq(in, out)
err = mlx5_cmd_check(err, in, out)
if (err)
// handle err
For DEVX users and those who care about full visibility, They will just
propagate the error to user space, and app can check if err == -EREMOTEIO,
then outbox.{status,syndrome} are valid.
API Note:
mlx5_cmd_check() must be used by kernel users since it allows the driver
to intercept the command execution status and return a driver simulated
status in case of driver induced error handling or reset/recovery flows.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The transition of the QP state from SQD to RTS is allowed by the IB
specification. The hardware also supports that, but it is not
implemented in mlx5_ib.
This commit adds SQD2RTS command to the modify QP in mlx5_ib to support
the missing feature. The feature is required by the signature pipelining
API that will be added to rdma-core.
Link: https://lore.kernel.org/r/ab4876360bfba0e9d64a5e8599438e32e0cb351e.1620641808.git.leonro@nvidia.com
Reviewed-by: Evgenii Kochetov <evgeniik@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make this interface symmetrical to other destroy paths.
Fixes: a49b1dc7ae44 ("RDMA: Convert destroy_wq to be void")
Link: https://lore.kernel.org/r/20200907120921.476363-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Missed steps during ECE handshake left userspace application with less
options for the ECE handshake. Pass ECE options in the additional
transitions.
Fixes: 50aec2c3135e ("RDMA/mlx5: Return ECE data after modify QP")
Link: https://lore.kernel.org/r/20200616104536.2426384-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
After users sets the ECE option, FW will return the agreed/supported bits
through an output structures of modify QP stages for regular QPs or
through create QP for the DCT.
Link: https://lore.kernel.org/r/20200526115440.205922-9-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The most common way to set ECE option will be during modify QP command in
INIT2RTR, RTR2RTS and RTS2RTS stages, so update mlx5 to support it.
The new bit in the comp_mask is needed to mark that kernel supports ECE
and can receive data instead of "reserved" field in the struct
mlx5_ib_modify_qp.
Link: https://lore.kernel.org/r/20200526115440.205922-8-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Supported ECE options are returned from FW in the create_qp phase and zero
means that field is not valid. Such default value allows us to reuse
reserved field without worries about comp_mask.
Update create QP API to return ECE options.
Link: https://lore.kernel.org/r/20200526115440.205922-3-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The mlx5_core doesn't need any functionality coded in qp.c, so move
that file to drivers/infiniband/ be under mlx5_ib responsibility.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
