| Age | Commit message (Collapse) | Author |
|---|
|
ACK_REQ_FREQ indicates the number of packets (after MTU fragmentation)
HW sends before setting an ACK request. When MTU is greater than or
equal to 1024, the current ACK_REQ_FREQ value causes HW to request an
ACK for every MTU fragment. The processing of a large number of ACKs
severely impacts HW performance when sending large size payloads.
Get message length of ack_req from FW so that we can adjust this
parameter according to different situations. There are several
constraints for ACK_REQ_FREQ:
1. mtu * (2 ^ ACK_REQ_FREQ) should not be too large, otherwise it may
cause some unexpected retries when sending large payload.
2. ACK_REQ_FREQ should be larger than or equal to LP_PKTN_INI.
3. ACK_REQ_FREQ must be equal to LP_PKTN_INI when using LDCP
or HC3 congestion control algorithm.
Fixes: 56518a603fd2 ("RDMA/hns: Modify the value of long message loopback slice")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
MW is no longer supported in hns. Delete relevant codes.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250605024917.1132393-1-huangjunxian6@hisilicon.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
hns_roce_hw_v2.h has a direct dependency on hnae3.h due to the
inline function hns_roce_write64(), but it doesn't include this
header currently. This leads to that files including
hns_roce_hw_v2.h must also include hnae3.h to avoid compilation
errors, even if they themselves don't really rely on hnae3.h.
This doesn't make sense, hns_roce_hw_v2.h should include hnae3.h
directly.
Fixes: d3743fa94ccd ("RDMA/hns: Fix the chip hanging caused by sending doorbell during reset")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250421132750.1363348-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If a QP is modified to error state and a flush CQE process is triggered,
the subsequent QP destruction mbox can still be successfully posted but
will be blocked in HW until the flush CQE process finishes. This causes
further mbox posting timeouts in driver. The blocking time is related
to QP depth. Considering an extreme case where SQ depth and RQ depth
are both 32K, the blocking time can reach about 135ms.
This patch adds a retry mechanism for mbox posting. For each try, FW
waits 15ms for HW to complete the previous mbox, otherwise return a
timeout error code to driver. Counting other time consumption in FW,
set 8 tries for mbox posting and a 5ms time gap before each retry to
increase to a sufficient timeout limit.
Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250208105930.522796-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
DIP algorithm requires a one-to-one mapping between dgid and dip_idx.
Currently a queue 'spare_idx' is used to store QPN of QPs that use
DIP algorithm. For a new dgid, use a QPN from spare_idx as dip_idx.
This method lacks a mechanism for deduplicating QPN, which may result
in different dgids sharing the same dip_idx and break the one-to-one
mapping requirement.
This patch replaces spare_idx with xarray and introduces a refcnt of
a dip_idx to indicate the number of QPs that using this dip_idx.
The state machine for dip_idx management is implemented as:
* The entry at an index in xarray is empty -- This indicates that the
corresponding dip_idx hasn't been created.
* The entry at an index in xarray is not empty but with 0 refcnt --
This indicates that the corresponding dip_idx has been created but
not used as dip_idx yet.
* The entry at an index in xarray is not empty and with non-0 refcnt --
This indicates that the corresponding dip_idx is being used by refcnt
number of DIP QPs.
Fixes: eb653eda1e91 ("RDMA/hns: Bugfix for incorrect association between dip_idx and dgid")
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Feng Fang <fangfeng4@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241112055553.3681129-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The FENCE indicator in hns WQE doesn't ensure that response data from
a previous Read/Atomic operation has been written to the requester's
memory before the subsequent Send/Write operation is processed. This
may result in the subsequent Send/Write operation accessing the original
data in memory instead of the expected response data.
Unlike FENCE, the SO (Strong Order) indicator blocks the subsequent
operation until the previous response data is written to memory and a
bresp is returned. Set the SO indicator instead of FENCE to maintain
strict order.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241108075743.2652258-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
eq_db_ci is updated only after all AEQEs are processed in the AEQ
interrupt handler, which is not timely enough and may result in
AEQ overflow. Two optimization methods are proposed:
1. Set an upper limit for AEQE processing.
2. Move time-consuming operations such as printings to the bottom
half of the interrupt.
cmd events and flush_cqe events are still fully processed in the top half
to ensure timely handling.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When a large number of tasks are issued, the speed of HW processing
mbx will slow down. The standard for judging mbx timeout in the current
firmware is 30ms, and the current timeout standard for the driver is also
30ms.
Considering that firmware scheduling in multi-function scenarios takes a
certain amount of time, this will cause the driver to time out too early
and report a failure before mbx execution times out.
This patch introduces a new mechanism that can set different timeouts for
different cmds and extends the timeout of mbx to 35ms.
Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240710133705.896445-9-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add max_ah and cq moderation capacities to hns_roce_query_device().
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Use macro instead of magic number.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
SCCC (SCC Context) is a context with QP granularity that contains
information about congestion control. Dump SCCC and QPC together
to improve troubleshooting.
When dumping raw QPC with rdmatool, there will be a total of 576 bytes
data output, where the first 512 bytes is QPC and the last 64 bytes is
SCCC. When congestion control is disabled, the 64 byte SCCC will be all 0.
Example:
$rdma res show qp -jpr
[ {
"ifindex": 0,
"ifname": "hns_0",
"data": [ 67,0,0,0... 512bytes
4,0,2... 64bytes]
},...
} ]
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240305055257.823513-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
granularity
Currently, congestion control algorithm is statically configured in
FW, and all QPs use the same algorithm(except UD which has a fixed
configuration of DCQCN). This is not flexible enough.
Support userspace configuring congestion control algorithm with QP
granularity while creating QPs. If the algorithm is not specified in
userspace, use the default one.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240301104845.1141083-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Support query hns HW stats for rdma-tool to help debugging.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230816091812.2899366-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Remove VF extend configuration since the relative registers are
configured in firmware currently.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230721025146.450831-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Support driver get the num of XRCD from firmware.
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230721025146.450831-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
On HIP08, the queried timeout attr is different from the timeout attr
configured by the user.
It is found by rdma-core testcase test_rdmacm_async_traffic:
======================================================================
FAIL: test_rdmacm_async_traffic (tests.test_rdmacm.CMTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./tests/test_rdmacm.py", line 33, in test_rdmacm_async_traffic
self.two_nodes_rdmacm_traffic(CMAsyncConnection, self.rdmacm_traffic,
File "./tests/base.py", line 382, in two_nodes_rdmacm_traffic
raise(res)
AssertionError
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20230512092245.344442-2-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current resource query for vf caps is driven by the driver,
which is unreasonable.
This patch adds a new command HNS_ROCE_OPC_QUERY_VF_CAPS_NUM
to support obtaining vf caps information from firmware.
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20230304091555.2241298-2-xuhaoyue1@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Enable the CQEIE field and configure the CQEIS field of QPC. And add
compatibility handling.
Link: https://lore.kernel.org/r/20221224102201.3114536-4-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The error code is fixed to EIO when CMD fails to excute. This patch
converts the error status reported by firmware to linux errno.
Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/20221126102911.2921820-6-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
After the hns roce driver is loaded, if you modify the mac address of the
network port, the following error will appear:
__ib_cache_gid_add: unable to add gid fe80:0000:0000:0000:4600:4dff:fe22:abb5 error=-28
hns3 0000:7d:00.0 hns_0: attr path_mtu(1) invalid while modify qp
The reason for the error is that the gid being occupied will cause the
failure to modify the gid. The gid is occupied by the loopback QP used by
free mr. When the mac address is modified, the gid will change. If there
is a busy QP at this time, the gid will not be released and the
modification will fail. The QP of free mr is created using the ib
interface. The ib interface will add a reference count to the gid,
resulting in this error scenario.
Considering that free mr is solving a bug in HIP08, not an actual
business, it is not necessary to use ib interfaces.
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Link: https://lore.kernel.org/r/20221126102911.2921820-2-xuhaoyue1@hisilicon.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When function reset and local invalidate are mixed, HNS RoCEE may hang.
Before introducing the cause of the problem, two hardware internal
concepts need to be introduced:
1. Execution queue: The queue of hardware execution instructions,
function reset and local invalidate are queued for execution in this
queue.
2.Local queue: A queue that stores local operation instructions. The
instructions in the local queue will be sent to the execution queue
for execution. The instructions in the local queue will not be removed
until the execution is completed.
The reason for the problem is as follows:
1. There is a function reset instruction in the execution queue, which
is currently being executed. A necessary condition for the successful
execution of function reset is: the hardware pipeline needs to empty
the instructions that were not completed before;
2. A local invalidate instruction at the head of the local queue is
sent to the execution queue. Now there are two instructions in the
execution queue, the first is the function reset instruction, and the
second is the local invalidate instruction, which will be executed in
se quence;
3. The user has issued many local invalidate operations, causing the
local queue to be filled up.
4. The user still has a new local operation command and is queuing to
enter the local queue. But the local queue is full and cannot receive
new instructions, this instruction is temporarily stored at the
hardware pipeline.
5. The function reset has been waiting for the instruction before the
hardware pipeline stage is drained. The hardware pipeline stage also
caches a local invalidate instruction, so the function reset cannot be
completed, and the instructions after it cannot be executed.
These factors together cause the execution logic deadlock of the hardware,
and the consequence is that RoCEE will not have any response. Considering
that the local operation command may potentially cause RoCEE to hang, this
feature is no longer supported.
Fixes: e93df0108579 ("RDMA/hns: Support local invalidate for hip08 in kernel space")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20221024083814.1089722-2-xuhaoyue1@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Trvial merge conflicts against rdma.git for-rc resolved matching
linux-next:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c
drivers/infiniband/hw/hns/hns_roce_main.c
https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.org
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The max_srq_desc_sz is defined in the code, but never used,
so delete this redundant variable.
Link: https://lore.kernel.org/r/20220922123315.3732205-10-xuhaoyue1@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The num_mtt_segs and max_extend_sg used to be used for HIP06,
remove them since the HIP06 code has been removed.
Link: https://lore.kernel.org/r/20220922123315.3732205-9-xuhaoyue1@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Delete () when using & to obtain an address.
Link: https://lore.kernel.org/r/20220922123315.3732205-4-xuhaoyue1@hisilicon.com
Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The bt number of qpc_timer of HIP09 increases compared with that of HIP08.
Therefore, qpc_timer_bt_num and num_qpc_timer do not match. As a result,
the driver may fail to allocate qpc_timer. So the driver needs to uniquely
uses qpc_timer_bt_num to represent the bt number of qpc_timer.
Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220829105021.1427804-4-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The supported page size for hns is (4K, 128M), not (4K, 2G).
Fixes: cfc85f3e4b7f ("RDMA/hns: Add profile support for hip08 driver")
Link: https://lore.kernel.org/r/20220829105021.1427804-2-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The MR raw restrack attributes come from the queue context maintained by
the ROCEE.
For example:
$ rdma res show mr dev hns_0 mrn 6 -dd -jp -r
[ {
"ifindex": 4,
"ifname": "hns_0",
"data": [ 1,0,0,0,2,0,0,0,0,3,0,0,0,0,2,0,0,0,0,0,32,0,0,0,2,0,0,0,
2,0,0,0,0,0,0,0 ]
} ]
Link: https://lore.kernel.org/r/20220822104455.2311053-8-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
There is no need to use a dedicated DXF file and DFX structure to manage
the interface of the query queue context.
Link: https://lore.kernel.org/r/20220822104455.2311053-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since ECC memory maintains a memory system immune to single-bit errors,
add support for correcting the 1bit-ECC error, which prevents a 1bit-ECC
error become an uncorrected type error. When a 1bit-ECC error happens in
the internal ram of the ROCE engine, such as the QPC table, as a 1bit-ECC
error caused by reading, the ROCE engine only corrects those 1bit ECC
errors by writing.
Link: https://lore.kernel.org/r/20220714134353.16700-6-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The HNS NIC driver receives and handles the abnormal interrupt of the RAS
type generated by ROCEE, and the HNS RDMA driver does not need to handle
this type of interrupt. Therefore, delete unused codes in the HNS RDMA
driver.
Link: https://lore.kernel.org/r/20220714134353.16700-2-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
To reduce the code size and make the code clearer, replace all
roce_get_xxx() with hr_reg_read() to read the data fields.
Link: https://lore.kernel.org/r/20220512080012.38728-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
To reduce the code size and make the code clearer, replace all
roce_set_xxx() with hr_reg_xxx() to write the data fields.
Link: https://lore.kernel.org/r/20220512080012.38728-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.
Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Before destroying MPT, the reserved loopback QPs send loopback IOs (one
write operation per SL). Completing these loopback IOs represents that
there isn't any outstanding request in MPT, then it's safe to destroy MPT.
Link: https://lore.kernel.org/r/20220310042835.38634-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
To resolve minor conflict in:
drivers/infiniband/hw/mlx5/mlx5_ib.h
By merging both hunks.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
HIP09 EQ does not support level 2 addressing.
Link: https://lore.kernel.org/r/20211231101341.45759-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Due to the discrete nature of the HIP08 timer unit, a requester might
finish the timeout period sooner, in elapsed real time, than its responder
does, even when both sides share the identical RNR timeout length included
in the RNR Nak packet and the responder indeed starts the timing prior to
the requester. Furthermore, if a 'providential' resend packet arrived
before the responder's timeout period expired, the responder is certainly
entitled to drop the packet silently in the light of IB protocol.
To address this problem, our team made good use of certain hardware facts:
1) The timing resolution regards the transmission arrangements is 1
microsecond, e.g. if cq_period field is set to 3, it would be
interpreted as 3 microsecond by hardware
2) A QPC field shall inform the hardware how many timing unit (ticks)
constitutes a full microsecond, which, by default, is 1000
3) It takes 14ns for the processor to handle a packet in the buffer, so
the RNR timeout length of 10ns would ensure our processing mechanism is
disabled during the entire timeout period and the packet won't be
dropped silently
To achieve (3), we permanently set the QPC field mentioned in (2) to zero
which nominally indicates every time tick is equivalent to a microsecond
in wall-clock time; now, a RNR timeout period at face value of 10 would
only last 10 ticks, which is 10ns in wall-clock time.
It's worth noting that we adapt the driver by magnifying certain
configuration parameters(cq_period, eq_period and ack_timeout)by 1000
given the user assumes the configuring timing unit to be microseconds.
Also, this particular improvisation is only deployed on HIP08 since other
hardware has already solved this issue.
Fixes: cfc85f3e4b7f ("RDMA/hns: Add profile support for hip08 driver")
Link: https://lore.kernel.org/r/20211209140655.49493-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
These macros are no longer used, so remove them.
Link: https://lore.kernel.org/r/20211119140208.40416-9-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There should be a space between the code and the comment on the right.
Link: https://lore.kernel.org/r/20211119140208.40416-4-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Just delete unnecessary blank lines.
Link: https://lore.kernel.org/r/1629985056-57004-8-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
dip_idx is associated with qp_num whose data type is u32. However, dip_idx
is incorrectly defined as u8 data in the hns_roce_dip struct, which leads
to data truncation during value assignment.
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
CMDQ support un-interrupt mode only, and firmware ignores this mode flag,
so remove it.
Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1629539607-33217-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The window selection field is necessary for congestion control of HIP09,
it is got from firmware and then filled into QPC. Some algorithms need it
to decide whether to limit the number of windows.
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1624364163-44185-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove unused members in EQ context structure.
Fixes: 782832f25404 ("RDMA/hns: Simplify the function config_eqc()")
Link: https://lore.kernel.org/r/1624011020-16992-7-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove unused members in srq context structure.
Link: https://lore.kernel.org/r/1624262443-24528-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use hr_write_reg() instead of roce_set_field().
Link: https://lore.kernel.org/r/1624262443-24528-9-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use "hr_reg_write" to replace "roce_set_filed".
Link: https://lore.kernel.org/r/1624262443-24528-8-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
WQE_INDEX and OPCODE and QPN of CQE use redundant masks. Just remove them.
Link: https://lore.kernel.org/r/1624262443-24528-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
