| Age | Commit message (Collapse) | Author |
|---|
|
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
CPU0 CPU1
(sysfs enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
unload module
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0.
Fixes: f8cce2ff3c04 ("coresight: syscfg: Add API to activate and enable configurations")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-4-yeoreum.yun@arm.com
|
|
There'll be possible race scenario for coresight config:
CPU0 CPU1
(perf enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
<iterating config_csdev_list> cscfg_remove_owned_csdev_configs()
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
iterating config_csdev_list could be raced with config_csdev_list's
entry delete.
To resolve this race , hold csdev->cscfg_csdev_lock() while
cscfg_remove_owned_csdev_configs()
Fixes: 02bd588e12df ("coresight: configuration: Update API to permit dynamic load/unload")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-3-yeoreum.yun@arm.com
|
|
coresight_device->cscfg_csdev_lock can be held during __schedule()
by perf_event_task_sched_out()/in().
Since coresight->cscfg_csdev_lock type is spinlock_t and
perf_event_task_sched_out()/in() is called after acquiring rq_lock,
which is raw_spinlock_t (an unsleepable lock),
this poses an issue in PREEMPT_RT kernel where spinlock_t is sleepable.
To address this, change type of coresight_device->cscfg_csdev_lock
from spinlock_t to raw_spinlock_t.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250306121110.1647948-2-yeoreum.yun@arm.com
|
|
The configfs system is a source of access to the config information in the
configuration and feature lists.
This can result in additional LOCKDEP issues as a result of the mutex
ordering between the config list mutex (cscfg_mutex) and the configfs
system mutexes.
As such we need to adjust how load/unload operations work to ensure correct
operation.
1) Previously the cscfg_mutex was held throughout the load/unload
operation. This is now only held during configuration list manipulations,
resulting in a multi-stage load/unload process.
2) All operations that manipulate the configfs representation of the
configurations and features are now separated out and run without the
cscfg_mutex being held. This avoids circular lock_dep issue with the
built-in configfs mutexes and semaphores
3) As the load and unload is now multi-stage, some parts under the
cscfg_mutex and others not:
i) A flag indicating a load / unload operation in progress is used to
serialise load / unload operations.
ii) activating any configuration not possible when unload is in progress.
iii) Configurations have an "available" flag set only after the last load
stage for the configuration is complete. Activation of the configuration
not possible till flag is set.
4) Following load/unload rules remain:
i) Unload prevented while any configuration is active remains.
ii) Unload in strict reverse order of load.
iii) Existing configurations can be activated while a new load operation
is underway. (by definition there can be no dependencies between an
existing configuration and a new loading one due to ii) above.)
Fixes: eb2ec49606c2 ("coresight: syscfg: Update load API for config loadable modules")
Reported-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220628173004.30002-3-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Any loaded configurations must be correctly unloaded on coresight module
exit, or issues can arise with nested locking in the configfs directory
code if built with CONFIG_LOCKDEP.
Prior to this patch, the preloaded configuration configfs directory entries
were being unloaded by the recursive code in
configfs_unregister_subsystem().
However, when built with CONFIG_LOCKDEP, this caused a nested lock warning,
which was not mitigated by the LOCKDEP dependent code in fs/configfs/dir.c
designed to prevent this, due to the different directory levels for the
root of the directory being removed.
As the preloaded (and all other) configurations are registered after
configfs_register_subsystem(), we now explicitly unload them before the
call to configfs_unregister_subsystem().
The new routine cscfg_unload_cfgs_on_exit() iterates through the load
owner list to unload any remaining configurations that were not unloaded
by the user before the module exits. This covers both the
CSCFG_OWNER_PRELOAD and CSCFG_OWNER_MODULE owner types, and will be
extended to cover future load owner types for CoreSight configurations.
Fixes: eb2ec49606c2 ("coresight: syscfg: Update load API for config loadable modules")
Reported-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220628173004.30002-2-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
device_register() calls device_initialize(),
according to doc of device_initialize:
Use put_device() to give up your reference instead of freeing
* @dev directly once you have called this function.
To prevent potential memleak, use put_device() for error handling.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Fixes: 85e2414c518a ("coresight: syscfg: Initial coresight system configuration")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124124121.8888-1-linmq006@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Adds configfs attributes to allow a configuration to be enabled for use
when sysfs is used to control CoreSight.
perf retains independent enabling of configurations.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211124200038.28662-6-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
CoreSight configurations and features can be added as kernel loadable
modules. This patch updates the load owner API to ensure that the module
cannot be unloaded either:
1) if the config it supplies is in use
2) if the module is not the last in the load order list.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211124200038.28662-4-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Expand the configuration API to allow dynamic runtime load and unload of
configurations and features.
On load, configurations and features are tagged with a "load owner" that
is used to determine sets that were loaded together in a given API call.
To unload the API uses the load owner to unload all elements previously
loaded by that owner.
The API also records the order in which different owners loaded
their elements into the system. Later loading configurations can use
previously loaded features, creating load dependencies. Therefore unload
is enforced strictly in the reverse order to load.
A load owner will be an additional loadable module, or a configuration
loaded via configfs.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211124200038.28662-3-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Update the existing load API to introduce a "load owner" concept.
This allows the tracking of the loaded configurations and features against
the loading owner type, to allow later unload according to owner.
A list of loaded configurations by owner is created.
The load owner infrastructure will be used in following patches
to implement dynanic load and unload, alongside dependency tracking.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211124200038.28662-2-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
This fixes warnings with -Wimplicit-function-declaration, e.g.
drivers/hwtracing/coresight/coresight-syscfg.c:455:15: error:
implicit declaration of function 'kzalloc' [-Werror,
-Wimplicit-function-declaration]
csdev_item = kzalloc(sizeof(struct cscfg_registered_csdev),
GFP_KERNEL);
Link: https://lore.kernel.org/r/20210830172820.2840433-1-jiancai@google.com
Fixes: 85e2414c518a ("coresight: syscfg: Initial coresight system configuration")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jian Cai <jiancai@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210913164613.1675791-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds configfs subsystem and attributes to the configuration manager
to enable the listing of loaded configurations and features.
The default values of feature parameters can be accessed and altered
from these attributes to affect all installed devices using the feature.
Link: https://lore.kernel.org/r/20210723165444.1048-10-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Preload set of configurations.
This patch creates a small set of preloaded configurations and features
that are available immediately after coresight has been initialised.
The current set provides a strobing feature for ETMv4, that creates a
periodic sampling of trace by switching trace generation on and off
using counters in the ETM.
A configuration called "autofdo" is also provided that uses the 'strobing'
feature and provides a couple of preset values, selectable on the perf
command line.
Link: https://lore.kernel.org/r/20210723165444.1048-9-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Configurations are first activated, then when any coresight device is
enabled, the active configurations are checked and any matching
one is enabled.
This patch provides the activation / enable API.
Link: https://lore.kernel.org/r/20210723165444.1048-6-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Loaded coresight configurations are registered in the cs_etm\events sub
directory. This extends the etm-perf code to handle these registrations,
and the cs_syscfg driver to perform the registration on load.
Link: https://lore.kernel.org/r/20210723165444.1048-5-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds a set of generic support functions that allow devices to set and save
features values on the device, and enable and disable configurations.
Additional functions for other common operations including feature
reset.
Link: https://lore.kernel.org/r/20210723165444.1048-4-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
API for individual devices to register with the syscfg management
system is added.
Devices register with matching information, and any features or
configurations that match will be loaded into the device.
The feature and configuration loading is extended so that on load these
are loaded into any currently registered devices. This allows
configuration loading after devices have been registered.
Link: https://lore.kernel.org/r/20210723165444.1048-3-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Creates an system management API to allow complex configurations and
features to be programmed into a CoreSight infrastructure.
A feature is defined as a programming set for a device or class of
devices.
A configuration is a set of features across the system that are enabled
for a trace session.
The API will manage system wide configuration, and allow complex
programmed features to be added to individual device instances, and
provide for system wide configuration selection on trace capture
operations.
This patch creates the initial data object and the initial API for
loading configurations and features.
Link: https://lore.kernel.org/r/20210723165444.1048-2-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
