summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-quirks.c
AgeCommit message (Collapse)Author
2025-07-03HID: elecom: add support for ELECOM HUGE 019B variantLeonard Dizon
The ELECOM M-HT1DRBK trackball has an additional device ID (056E:019B) not yet recognized by the driver, despite using the same report descriptor as earlier variants. This patch adds the new ID and applies the same fixups, enabling all 8 buttons to function properly. Signed-off-by: Leonard Dizon <leonard@snekbyte.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-06-10HID: Add IGNORE quirk for SMARTLINKTECHNOLOGYZhang Heng
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an audio device is requested to get specific report id, the following error may occur. [ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd [ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00 [ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device [ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology [ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001 [ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35 [ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2 [ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint [ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) Ignore HID interface. The device is working properly. Signed-off-by: Zhang Heng <zhangheng@kylinos.cn> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-06-10HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP CamerasChia-Lin Kao (AceLan)
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C) report a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. Add these 2 devices to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace. Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-06-03Merge branch 'for-6.16/core' into for-linusJiri Kosina
- make it possible to set hid_mouse_ignore_list dynamically (the same way we handle other quirks) (Aditya Garg) - fix potential OOB in usbhid_parse() (Terry Junge)
2025-04-24HID: quirks: Add ADATA XPG alpha wireless mouse supportMilton Barrera
This patch adds HID_QUIRK_ALWAYS_POLL for the ADATA XPG wireless gaming mouse (USB ID 125f:7505) and its USB dongle (USB ID 125f:7506). Without this quirk, the device does not generate input events properly. Signed-off-by: Milton Barrera <miltonjosue2001@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-04-24HID: quirks: Add HID_QUIRK_IGNORE_MOUSE quirkAditya Garg
Some USB HID mice have drivers both in HID as well as a separate USB driver. The already existing hid_mouse_ignore_list in hid-quirks manages this, but is not yet configurable by usbhid.quirks, unlike all others like hid_ignore_list. Thus in some HID devices, where the vendor provides USB drivers only for the mouse and lets keyboard handled by the generic hid drivers, presence of such a quirk prevents the user from compiling hid core again to add the device to the table. Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-26Merge branch 'for-6.15/sony' into for-linusJiri Kosina
- PlayStation 5 controllers support (Alex Henrie)
2025-03-26Merge branch 'for-6.15/apple' into for-linusJiri Kosina
- support for Apple Touch Bars (Kerem Karabay, Aditya Garg)
2025-02-08HID: Enable playstation driver for PlayStation 5 controllersAlex Henrie
Without entries in the hid_have_special_driver table, PS5 controllers default to the hidraw driver instead of the hid-playstation driver. Signed-off-by: Alex Henrie <dhenrale@amazon.com> Acked-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-08HID: Enable playstation driver independently of sony driverAlex Henrie
PlayStation 4 controllers use the hid-playstation driver now, but they are still not included in the hid_have_special_driver table unless the hid-sony driver is enabled. Split up that section of the table so that hid-playstation works even in the absence of hid-sony. Fixes: 4f1f391869ee ("HID: sony: remove DualShock4 support.") Signed-off-by: Alex Henrie <dhenrale@amazon.com> Acked-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-07HID: hid-appletb-kbd: add driver for the keyboard mode of Apple Touch BarsKerem Karabay
The Touch Bars found on x86 Macs support two USB configurations: one where the device presents itself as a HID keyboard and can display predefined sets of keys, and one where the operating system has full control over what is displayed. This commit adds a driver for the display functionality of the first configuration. Note that currently only T2 Macs are supported. This driver is based on previous work done by Ronald Tschalär <ronald@innovation.ch>. Signed-off-by: Kerem Karabay <kekrby@gmail.com> Co-developed-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-07HID: hid-appletb-bl: add driver for the backlight of Apple Touch BarsKerem Karabay
This commit adds a driver for the backlight of Apple Touch Bars on x86 Macs. Note that currently only T2 Macs are supported. This driver is based on previous work done by Ronald Tschalär <ronald@innovation.ch>. Signed-off-by: Kerem Karabay <kekrby@gmail.com> Co-developed-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-03HID: ignore non-functional sensor in HP 5MP CameraChia-Lin Kao (AceLan)
The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. [453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff [453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff Add this device to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace. Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-04HID: Add quirk for Labtec/ODDOR/aikeec handbrakeSebastian Parschauer
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting indefinitely. It is a handbrake for sim racing detected as joystick. Reported and tested by GitHub user N0th1ngM4tt3rs. Link: https://github.com/sriemer/fix-linux-mouse issue 22 Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-11-21HID: add ALWAYS_POLL quirk for Apple kbOliver Neukum
These devices disconnect if suspended without remote wakeup. They can operate with the standard driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-27HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221WJiri Kosina
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting indefinitely. Reported-by: Robert Ayrapetyan <robert.ayrapetyan@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-06-09HID: add quirk for 03f0:464a HP Elite Presenter MouseMarco Morandini
HP Elite Presenter Mouse HID Record Descriptor shows two mouses (Repord ID 0x1 and 0x2), one keypad (Report ID 0x5), two Consumer Controls (Report IDs 0x6 and 0x3). Previous to this commit it registers one mouse, one keypad and one Consumer Control, and it was usable only as a digitl laser pointer (one of the two mouses). This patch defines the 464a USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, allowing to use the device both as a mouse and a digital laser pointer. Signed-off-by: Marco Morandini <marco.morandini@polimi.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-24HID: kye: Add support for all kye tabletsDavid Yang
Physical data for all kye tablets are collected from Windows driver, to generate correct HID reports. Signed-off-by: David Yang <mmyangfl@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10HID: kye: Sort kye devicesDavid Yang
Sort kye devices by their Produce IDs. Signed-off-by: David Yang <mmyangfl@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-02-22Merge branch 'for-6.3/multitouch' into for-linusBenjamin Tissoires
Allow to pass quirks from i2c-hid to hid-multitouch (Allen Ballway & Dmitry Torokhov)
2023-02-09HID: retain initial quirks set up when creating HID devicesDmitry Torokhov
In certain circumstances, such as when creating I2C-connected HID devices, we want to pass and retain some quirks (axis inversion, etc). The source of such quirks may be device tree, or DMI data, or something else not readily available to the HID core itself and therefore cannot be reconstructed easily. To allow this, introduce "initial_quirks" field in hid_device structure and use it when determining the final set of quirks. This fixes the problem with i2c-hid setting up device-tree sourced quirks too late and losing them on device rebind, and also allows to sever the tie between hid-code and i2c-hid when applying DMI-based quirks. Fixes: b60d3c803d76 ("HID: i2c-hid-of: Expose the touchscreen-inverted properties") Fixes: a2f416bf062a ("HID: multitouch: Add quirks for flipped axes") Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Allen Ballway <ballway@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-01-20HID: elecom: add support for TrackBall 056E:011CTakahiro Fujii
Make function buttons on ELECOM M-HT1DRBK trackball mouse work. This model has two devices with different device IDs (010D and 011C). Both of them misreports the number of buttons as 5 in the report descriptor, even though they have 8 buttons. hid-elecom overwrites the report to fix them, but supports only on 010D and does not work on 011C. This patch fixes 011C in the similar way but with specialized position parameters. In fact, it is sufficient to rewrite only 17th byte (05 -> 08). However I followed the existing way. Signed-off-by: Takahiro Fujii <fujii@xaxxi.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: multitouch: Add quirks for flipped axesAllen Ballway
Certain touchscreen devices, such as the ELAN9034, are oriented incorrectly and report touches on opposite points on the X and Y axes. For example, a 100x200 screen touched at (10,20) would report (90, 180) and vice versa. This is fixed by adding device quirks to transform the touch points into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y. Signed-off-by: Allen Ballway <ballway@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-17HID: revert CHERRY_MOUSE_000C quirkJiri Kosina
This partially reverts commit f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice"), as it turns out to break reboot on some platforms for reason yet to be understood. Fixes: f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-11-22HID: usbhid: Add ALWAYS_POLL quirk for some miceAnkit Patel
Some additional USB mouse devices are needing ALWAYS_POLL quirk without which they disconnect and reconnect every 60s. Add below devices to the known quirk list. CHERRY VID 0x046a, PID 0x000c MICROSOFT VID 0x045e, PID 0x0783 PRIMAX VID 0x0461, PID 0x4e2a Signed-off-by: Ankit Patel <anpatel@nvidia.com> Signed-off-by: Haotien Hsu <haotienh@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-10-18HID: saitek: add madcatz variant of MMO7 mouse device IDSamuel Bailey
The MadCatz variant of the MMO7 mouse has the ID 0738:1713 and the same quirks as the Saitek variant. Signed-off-by: Samuel Bailey <samuel.bailey1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-08-25HID: Add Apple Touchbar on T2 Macs in hid_have_special_driver listAditya Garg
The touchbar on Apple T2 Macs has 2 modes, one that shows the function keys and other that shows the media controls. The user can use the fn key on his keyboard to switch between the 2 modes. On Linux, if people were using an external keyboard or mouse, the touchbar failed to change modes on pressing the fn key with the following in dmesg :- [ 10.661445] apple-ib-als 0003:05AC:8262.0001: : USB HID v1.01 Device [Apple Inc. Ambient Light Sensor] on usb-bce-vhci-3/input0 [ 11.830992] apple-ib-touchbar 0003:05AC:8302.0007: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0 [ 12.139407] apple-ib-touchbar 0003:05AC:8102.0008: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0 [ 12.211824] apple-ib-touchbar 0003:05AC:8102.0009: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1 [ 14.219759] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110) [ 24.395670] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110) [ 34.635791] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110) [ 269.579233] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 1 (-110) Add the USB IDs of the touchbar found in T2 Macs to HID have special driver list to fix the issue. Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-16HID: apple: Add necessary IDs and configuration for T2 Macs.Aun-Ali Zaidi
This patch adds the necessary IDs and configuration for Macs with the T2 Security chip. Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net> Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-05HID:Add support for UGTABLET WP5540Sergio Costas
This patch adds support for the UGTABLET WP5540 digitizer tablet devices. Without it, the pen moves the cursor, but neither the buttons nor the tap sensor in the tip do work. Signed-off-by: Sergio Costas <rastersoft@gmail.com> Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2022-01-10Merge branch 'for-5.17/apple' into for-linusJiri Kosina
- Apple Magic Keyboard support improvements (José Expósito, Alex Henrie, Benjamin Berg)
2022-01-06HID: apple: Add 2021 Magic Keyboard with fingerprint readerAlex Henrie
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Tested-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-29HID: quirks: Add quirk for the Microsoft Surface 3 type-coverHans de Goede
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Microsoft Surface 3 (non pro) type-cover. Trying to init the reports seems to confuse the type-cover and causes 2 issues: 1. Despite hid-multitouch sending the command to switch the touchpad to multitouch mode, it keeps sending events on the mouse emulation interface. 2. The touchpad completely stops sending events after a reboot. Adding the HID_QUIRK_NO_INIT_REPORTS quirk fixes both issues. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-10-19HID: apple: Add support for the 2021 Magic KeyboardAlex Henrie
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-10-19HID: apple: Rename MAGIC_KEYBOARD_ANSI to MAGIC_KEYBOARD_2015Alex Henrie
The ANSI, ISO, and JIS variants of this keyboard all have the same product ID. Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: thrustmaster: clean up Makefile and adapt quirksLukas Bulwahn
Commit c49c33637802 ("HID: support for initialization of some Thrustmaster wheels") messed up the Makefile and quirks during the refactoring of this commit. Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs: HID_TMINIT Referencing files: drivers/hid/Makefile, drivers/hid/hid-quirks.c Following the discussion (see Link), CONFIG_HID_THRUSTMASTER is the intended config for CONFIG_HID_TMINIT and the file hid-tminit.c was actually added as hid-thrustmaster.c. So, clean up Makefile and adapt quirks to that refactoring. Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels") Link: https://lore.kernel.org/linux-input/CAKXUXMx6dByO03f3dX0X5zjvQp0j2AhJBg0vQFDmhZUhtKxRxw@mail.gmail.com/ Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05HID: quirks: Add quirk for Lenovo optical mouseSaeed Mirzamohammadi
The Lenovo optical mouse with vendor id of 0x17ef and product id of 0x600e experiences disconnecting issues every 55 seconds: [38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse [38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665 [38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0 [38619.360692] usb 1-1.4: USB disconnect, device number 48 [38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd [38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00 [38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0 This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly. Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05HID: a4tech: use A4_2WHEEL_MOUSE_HACK_B8 for A4TECH NB-95Mateusz Jończyk
This mouse has a horizontal wheel that requires special handling. Without this patch, the horizontal wheel acts like a vertical wheel. In the output of `hidrd-convert` for this mouse, there is a `Usage (B8h)` field. It corresponds to a byte in packets sent by the device that specifies which wheel generated an input event. The name "A4TECH" is spelled in all capitals on the company website. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K15A keyboard-dockHans de Goede
Just like the K12A the Dell K15A keyboard-dock has problems with get_feature requests. This sometimes leads to several "failed to fetch feature 8" messages getting logged, after which the touchpad may or may not work. Just like the K15A these errors are triggered by undocking and docking the tablet. There also seem to be other problems when undocking and then docking again in quick succession. It seems that in this case the keyboard-controller still retains some power from capacitors and does not go through a power-on-reset leaving it in a confuses state, symptoms of this are: 1. The USB-ids changing to 048d:8910 2. Failure to read the HID descriptors on the second (mouse) USB intf. 3. The touchpad freezing after a while These problems can all be cleared by undocking the keyboard and waiting a full minute before redocking it. Unfortunately there is nothing we can do about this in the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for Saitek X65Nirenjan Krishnan
The Saitek X65 joystick has a pair of axes that were used as mouse pointer controls by the Windows driver. The corresponding usage page is the Game Controls page, which is not recognized by the generic HID driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes the second axis get mapped to ABS_MISC+1, and therefore made available separately. Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-04-29Merge branch 'for-5.13/thrustmaster' into for-linusJiri Kosina
- support for initialization of some newer Thrustmaster wheels from Dario Pagani
2021-03-19HID: support for initialization of some Thrustmaster wheelsDario Pagani
Add support for proper initialization of some Thrustmaster wheels that appear like a "Thrustmaster FFB Wheel" (044f:b65d) to the host. When the device is connected a special usb request is sent, this request makes the wheel disconnect and reappear to the host as the "real wheel". For example: a T150 will re-appear as 044f:b677 and a T300 as 044f:b66e [jkosina@suse.cz: renamed driver to hid-thrustmaster] Link: https://github.com/scarburato/hid-tminit Signed-off-by: Dario Pagani <dario.pagani.146@gmail.com> Co-developed-by: Kim Kuparinen <kimi.h.kuparinen@gmail.com> Signed-off-by: Kim Kuparinen <kimi.h.kuparinen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-03-08HID: logitech-dj: Handle newer quad/bt2.0 receivers in HID proxy modeHans de Goede
The Dinovo Edge and Dinovo Mini keyboards with builtin touchpad come with a different version of the quad/bt2.0 combo receivers shipped with the MX5000 and MX5500 keyboards. These receivers are compatible with one another, e.g. the Dinovo Edge keyboard can be paired with the MX5000 receiver. Like the MX5x00 receivers in HID proxy mode these receivers present themselves as a hub with multiple USB-HID devices, one for the keyboard and one for the mouse. Where they differ is that the mouse USB-device has 2 input reports for reporting mice events. It has the exact same INPUT(2) report as the MX5x00 receivers, but it also has a second INPUT(5) mouse report which is different; and when the Dinovo receivers are paired with the Dinovo keyboards the second INPUT(5) mouse report is actually used for events on the builtin touchpad. Add support for handling the Dinovo quad/bluetooth-2.0 combo receivers in HID proxy mode to logitech-dj, like we already do for the similar MX5000 and MX5500 receivers. This adds battery monitoring functionality (through logitech-hidpp) and fixes the Phone (Fn + F1) and "[A]" - "[D]" (Fn + F9 - F12) hotkeys not working on the Dinovo Edge. Note these receivers present themselves as a hub with 2 separate USB devices for the keyboard and mouse; and the logitech-dj code needs to bind to both devices (just as with the MX5x00 receivers). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-23Merge branch 'for-5.12/uclogic' into for-linusJiri Kosina
- Trust Panora support improvements from Cristian Klein
2021-01-26HID: correct kernel-doc notation in hid-quirks.cRandy Dunlap
Use correct kernel-doc notation for functions. Add notation (comments) where it is missing. Use the documented "Return:" notation for function return values. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-08HID: uclogic: Improve support for Trust PanoraCristian Klein
After more discussions with the [libinput project][1], it has been determined that the uclogic driver provides better support for this tablet. Fortunately, the Trust Panora is physically and logically identical with the UGEE G5, despite having a different USB vendor and product ID. [1]: https://gitlab.freedesktop.org/libinput/libinput/-/issues/482 Signed-off-by: Cristian Klein <cristian.klein@elastisys.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-12-16Merge branch 'for-5.11/elecom' into for-linusJiri Kosina
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma
2020-11-25HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube AdapterEthan Warth
Mayflash/Dragonrise seems to have yet another device ID for one of their Gamecube controller adapters. Previous to this commit, the adapter registered only one /dev/input/js* device, and all controller inputs (from any controller) were mapped to this device. This patch defines the 1846 USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, which fixes that (with the patch, four /dev/input/js* devices are created, one for each of the four controller ports). Signed-off-by: Ethan Warth <redyoshi49q@gmail.com> Tested-by: Wladimir J. van der Laan <laanwj@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-25HID: elecom: add support for EX-G M-XGL20DLBK wireless mouseYOSHIOKA Takuma
Enables three buttons (Fn1, Fn2, and Fn3) on the ELECOM M-XGL20DLBK wireless mouse. While this mouse is EX-G brand, report descriptor is a bit different from EX-G trackball mouse. To enable extra buttons, report should be rewritten in a similar way to trackballs, but with different position parameters. Signed-off-by: YOSHIOKA Takuma <lo48576@hard-wi.red> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-09HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devicesChris Ye
Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to be set explicitly with this flag. Signed-off-by: Chris Ye <lzye@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-10-23HID: add support for Sega SaturnJiri Kosina
This device needs HID_QUIRK_MULTI_INPUT in order to be presented to userspace in a consistent way. Reported-and-tested-by: David Gámiz Jiménez <david.gamiz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 02:42:48 +0000