summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/virtio
AgeCommit message (Collapse)Author
40 hoursMerge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...
2025-07-17Revert "drm/virtio: Use dma_buf from GEM object instance"Thomas Zimmermann
This reverts commit 415cb45895f43015515473fbc40563ca5eec9a7c. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/r/20250715155934.150656-3-tzimmermann@suse.de
2025-07-16drm/virtio: Pass along the format info from .fb_create() to ↵Ville Syrjälä
drm_helper_mode_fill_fb_struct() Plumb the format info from .fb_create() all the way to drm_helper_mode_fill_fb_struct() to avoid the redundant lookup. Cc: David Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: virtualization@lists.linux.dev Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-18-ville.syrjala@linux.intel.com
2025-07-16drm: Allow the caller to pass in the format info to ↵Ville Syrjälä
drm_helper_mode_fill_fb_struct() Soon all drivers should have the format info already available in the places where they call drm_helper_mode_fill_fb_struct(). Allow it to be passed along into drm_helper_mode_fill_fb_struct() instead of doing yet another redundant lookup. Start by always passing in NULL and still doing the extra lookup. The actual changes to avoid the lookup will follow. Done with cocci (with some manual fixups): @@ identifier dev, fb, mode_cmd; expression get_format_info; @@ void drm_helper_mode_fill_fb_struct(struct drm_device *dev, struct drm_framebuffer *fb, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... - fb->format = get_format_info; + fb->format = info ?: get_format_info; ... } @@ identifier dev, fb, mode_cmd; @@ void drm_helper_mode_fill_fb_struct(struct drm_device *dev, struct drm_framebuffer *fb, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); @@ expression dev, fb, mode_cmd; @@ drm_helper_mode_fill_fb_struct(dev, fb + ,NULL ,mode_cmd); Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <lumag@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux.dev Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-6-ville.syrjala@linux.intel.com
2025-07-16drm: Pass the format info to .fb_create()Ville Syrjälä
Pass along the format information from the top to .fb_create() so that we can avoid redundant (and somewhat expensive) lookups in the drivers. Done with cocci (with some manual fixups): @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... ( - const struct drm_format_info *info = drm_get_format_info(...); | - const struct drm_format_info *info; ... - info = drm_get_format_info(...); ) <... - if (!info) - return ...; ...> } @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... } @find@ identifier fb_create_func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *fb_create_func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); @@ identifier find.fb_create_func; expression dev, file, mode_cmd; @@ fb_create_func(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create_with_dirty(dev, file + ,info ,mode_cmd) @@ expression dev, file_priv, mode_cmd; identifier info, fb; @@ info = drm_get_format_info(...); ... fb = dev->mode_config.funcs->fb_create(dev, file_priv + ,info ,mode_cmd); @@ identifier dev, file_priv, mode_cmd; @@ struct drm_mode_config_funcs { ... struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); ... }; v2: Fix kernel docs (Laurent) Fix commit msg (Geert) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <lumag@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Biju Das <biju.das.jz@bp.renesas.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: "Maíra Canal" <mcanal@igalia.com> Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux.dev Cc: spice-devel@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-5-ville.syrjala@linux.intel.com
2025-05-12drm/virtio: Fix NULL pointer deref in virtgpu_dma_buf_free_obj()Vivek Kasireddy
There is a chance that obj->dma_buf would be NULL by the time virtgpu_dma_buf_free_obj() is called. This can happen for imported prime objects, when drm_gem_object_exported_dma_buf_free() gets called on them before drm_gem_object_free(). This is because drm_gem_object_exported_dma_buf_free() explicitly sets obj->dma_buf to NULL. Therefore, fix this issue by storing the dma_buf pointer in the virtio_gpu_object instance and using it in virtgpu_dma_buf_free_obj. This stored pointer is guaranteed to be valid until the object is freed as we took a reference on it in virtgpu_gem_prime_import(). Fixes: 415cb45895f4 ("drm/virtio: Use dma_buf from GEM object instance") Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250501232419.180337-1-vivek.kasireddy@intel.com
2025-05-06BackMerge tag 'v6.15-rc5' into drm-nextDave Airlie
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-04-18virtgpu: don't reset on shutdownMichael S. Tsirkin
It looks like GPUs are used after shutdown is invoked. Thus, breaking virtio gpu in the shutdown callback is not a good idea - guest hangs attempting to finish console drawing, with these warnings: [ 20.504464] WARNING: CPU: 0 PID: 568 at drivers/gpu/drm/virtio/virtgpu_vq.c:358 virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.505685] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables nfnetlink vfat fat intel_rapl_msr intel_rapl_common intel_uncore_frequency_common nfit libnvdimm kvm_intel kvm rapl iTCO_wdt iTCO_vendor_support virtio_gpu virtio_dma_buf pcspkr drm_shmem_helper i2c_i801 drm_kms_helper lpc_ich i2c_smbus virtio_balloon joydev drm fuse xfs libcrc32c ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata virtio_net ghash_clmulni_intel net_failover virtio_blk failover serio_raw dm_mirror dm_region_hash dm_log dm_mod [ 20.511847] CPU: 0 PID: 568 Comm: kworker/0:3 Kdump: loaded Tainted: G W ------- --- 5.14.0-578.6675_1757216455.el9.x86_64 #1 [ 20.513157] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20241117-3.el9 11/17/2024 [ 20.513918] Workqueue: events drm_fb_helper_damage_work [drm_kms_helper] [ 20.514626] RIP: 0010:virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.515332] Code: 00 00 48 85 c0 74 0c 48 8b 78 08 48 89 ee e8 51 50 00 00 65 ff 0d 42 e3 74 3f 0f 85 69 ff ff ff 0f 1f 44 00 00 e9 5f ff ff ff <0f> 0b e9 3f ff ff ff 48 83 3c 24 00 74 0e 49 8b 7f 40 48 85 ff 74 [ 20.517272] RSP: 0018:ff34f0a8c0787ad8 EFLAGS: 00010282 [ 20.517820] RAX: 00000000fffffffb RBX: 0000000000000000 RCX: 0000000000000820 [ 20.518565] RDX: 0000000000000000 RSI: ff34f0a8c0787be0 RDI: ff218bef03a26300 [ 20.519308] RBP: ff218bef03a26300 R08: 0000000000000001 R09: ff218bef07224360 [ 20.520059] R10: 0000000000008dc0 R11: 0000000000000002 R12: ff218bef02630028 [ 20.520806] R13: ff218bef0263fb48 R14: ff218bef00cb8000 R15: ff218bef07224360 [ 20.521555] FS: 0000000000000000(0000) GS:ff218bef7ba00000(0000) knlGS:0000000000000000 [ 20.522397] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 20.522996] CR2: 000055ac4f7871c0 CR3: 000000010b9f2002 CR4: 0000000000771ef0 [ 20.523740] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 20.524477] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 20.525223] PKRU: 55555554 [ 20.525515] Call Trace: [ 20.525777] <TASK> [ 20.526003] ? show_trace_log_lvl+0x1c4/0x2df [ 20.526464] ? show_trace_log_lvl+0x1c4/0x2df [ 20.526925] ? virtio_gpu_queue_fenced_ctrl_buffer+0x82/0x2c0 [virtio_gpu] [ 20.527643] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.528282] ? __warn+0x7e/0xd0 [ 20.528621] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.529256] ? report_bug+0x100/0x140 [ 20.529643] ? handle_bug+0x3c/0x70 [ 20.530010] ? exc_invalid_op+0x14/0x70 [ 20.530421] ? asm_exc_invalid_op+0x16/0x20 [ 20.530862] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.531506] ? virtio_gpu_queue_ctrl_sgs+0x174/0x290 [virtio_gpu] [ 20.532148] virtio_gpu_queue_fenced_ctrl_buffer+0x82/0x2c0 [virtio_gpu] [ 20.532843] virtio_gpu_primary_plane_update+0x3e2/0x460 [virtio_gpu] [ 20.533520] drm_atomic_helper_commit_planes+0x108/0x320 [drm_kms_helper] [ 20.534233] drm_atomic_helper_commit_tail+0x45/0x80 [drm_kms_helper] [ 20.534914] commit_tail+0xd2/0x130 [drm_kms_helper] [ 20.535446] drm_atomic_helper_commit+0x11b/0x140 [drm_kms_helper] [ 20.536097] drm_atomic_commit+0xa4/0xe0 [drm] [ 20.536588] ? __pfx___drm_printfn_info+0x10/0x10 [drm] [ 20.537162] drm_atomic_helper_dirtyfb+0x192/0x270 [drm_kms_helper] [ 20.537823] drm_fbdev_shmem_helper_fb_dirty+0x43/0xa0 [drm_shmem_helper] [ 20.538536] drm_fb_helper_damage_work+0x87/0x160 [drm_kms_helper] [ 20.539188] process_one_work+0x194/0x380 [ 20.539612] worker_thread+0x2fe/0x410 [ 20.540007] ? __pfx_worker_thread+0x10/0x10 [ 20.540456] kthread+0xdd/0x100 [ 20.540791] ? __pfx_kthread+0x10/0x10 [ 20.541190] ret_from_fork+0x29/0x50 [ 20.541566] </TASK> [ 20.541802] ---[ end trace 0000000000000000 ]--- It looks like the shutdown is called in the middle of console drawing, so we should either wait for it to finish, or let drm handle the shutdown. This patch implements this second option: Add an option for drivers to bypass the common break+reset handling. As DRM is careful to flush/synchronize outstanding buffers, it looks like GPU can just have a NOP there. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Fixes: 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") Cc: Eric Auger <eauger@redhat.com> Cc: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <8490dbeb6f79ed039e6c11d121002618972538a3.1744293540.git.mst@redhat.com>
2025-04-16drm/virtio: Support drm_panic with non-vmapped shmem BORyosuke Yasuoka
Pass array of pages of the scanout buffer to shmem BO, allowing drm_panic to work even if the BO is not vmapped. Link: https://lore.kernel.org/all/20250407140138.162383-3-jfalempe@redhat.com/ Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: rebased on misc-next, fixed minor checkpatch warn] [dmitry.osipenko@collabora.com: changed commit message to use link tag] Link: https://lore.kernel.org/all/20250412132012.291837-1-ryasuoka@redhat.com/
2025-04-16drm/virtio: Use dma_buf from GEM object instanceThomas Zimmermann
Avoid dereferencing struct drm_gem_object.import_attach for the imported dma-buf. The dma_buf field in the GEM object instance refers to the same buffer. Prepares to make import_attach optional. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250414131507.566072-3-tzimmermann@suse.de
2025-04-16drm/virtio: Test for imported buffers with drm_gem_is_imported()Thomas Zimmermann
Instead of testing import_attach for imported GEM buffers, invoke drm_gem_is_imported() to do the test. The helper tests the dma_buf itself while import_attach is just an artifact of the import. Prepares to make import_attach optional. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250414131507.566072-2-tzimmermann@suse.de
2025-04-14Merge tag 'drm-misc-next-2025-04-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.16-rc1: UAPI Changes: - Add ASAHI uapi header! - Add apple fourcc modifiers. - Add capset virtio definitions to UAPI. - Extend EXPORT_SYNC_FILE for timeline syncobjs. Cross-subsystem Changes: - Adjust DMA-BUF sg handling to not cache map on attach. - Update drm/ci, hlcdc, virtio, maintainers. - Update fbdev todo. - Allow setting dma-device for dma-buf import. - Export efi_mem_desc_lookup to make efidrm build as a module. Core Changes: - Update drm scheduler docs. - Use the correct resv object in TTM delayed destroy. - Fix compiler warning with panic qr code, and other small fixes. - drm/ci updates. - Add debugfs file for listing all bridges. - Small fixes to drm/client, ttm tests. - Add documentation to display/hdmi. - Add kunit tests for bridges. - Dont fail managed device probing if connector polling fails. - Create Kconfig.debug for drm core. - Add tests for the drm scheduler. - Add and use new access helpers for DPCPD. - Add generic and optimized conversions for format-helper. - Begin refcounting panel for improving lifetime handling. - Unify simpledrm and ofdrm sysfb, and add extra features. - Split hdmi audio in bridge to make DP audio work. Driver Changes: - Convert drivers to use devm_platform_ioremap_resource(). - Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4, vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm, bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu, bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas, imagination, various panels. - Allow attaching more display to vkms. - Add Powertip PH128800T004-ZZA01 panel. - Add rotation quirk for ZOTAC panel. - Convert bridge/tc358775 to atomic. - Remove deprecated panel calls from synaptics, novatek, samsung panels. - Refactor shmem helper page pinning and accel drivers using it. - Add dmabuf support to accel/amdxdna. - Use 4k page table format for panfrost/mediatek. - Add common powerup/down dp link helper and use it. - Assorted compiler warning fixes. - Support dma-buf import for renesas Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # include/drm/drm_kunit_helpers.h From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
2025-04-08Merge drm/drm-fixes into drm-misc-fixesThomas Zimmermann
Backmerging to get updates from v6.15-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-04-01drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb()Dmitry Osipenko
Correct error handling in prepare_fb() to fix leaking resources when error happens. Fixes: 4a696a2ee646 ("drm/virtio: Add prepare and cleanup routines for imported dmabuf obj") Cc: <stable@vger.kernel.org> # v6.14+ Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250401123842.2232205-2-dmitry.osipenko@collabora.com
2025-04-01drm/virtio: Don't attach GEM to a non-created context in gem_object_open()Dmitry Osipenko
The vfpriv->ctx_id is always initialized to a non-zero value. Check whether context was created before attaching GEM to this context ID. This left unnoticed previously because host silently skips attachment if context doesn't exist, still we shouldn't do that for consistency. Fixes: 086b9f27f0ab ("drm/virtio: Don't create a context with default param if context_init is supported") Cc: <stable@vger.kernel.org> # v6.14+ Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/20250401123842.2232205-1-dmitry.osipenko@collabora.com
2025-03-26drm/virtio: Fix flickering issue seen with imported dmabufsVivek Kasireddy
We need to save the reservation object pointer associated with the imported dmabuf in the newly created GEM object to allow drm_gem_plane_helper_prepare_fb() to extract the exclusive fence from it and attach it to the plane state during prepare phase. This is needed to ensure that drm_atomic_helper_wait_for_fences() correctly waits for the relevant fences (move, etc) associated with the reservation object, thereby implementing proper synchronization. Otherwise, artifacts or slight flickering can be seen when apps are dragged across the screen when running Gnome (Wayland). This problem is mostly seen with dGPUs in the case where the FBs are allocated in VRAM but need to be migrated to System RAM as they are shared with virtio-gpu. Fixes: ca77f27a2665 ("drm/virtio: Import prime buffers from other devices as guest blobs") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: Moved assignment before object_init()] Link: https://patchwork.freedesktop.org/patch/msgid/20250325201021.1315080-1-vivek.kasireddy@intel.com
2025-03-06dma-buf: drop caching of sg_tablesChristian König
That was purely for the transition from static to dynamic dma-buf handling and can be removed again now. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211163109.12200-5-christian.koenig@amd.com
2025-03-06dma-buf/dma-fence: remove unnecessary callbacksChristian König
The fence_value_str and timeline_value_str callbacks were just an unnecessary abstraction in the SW sync implementation. The only caller of those callbacks already knew that the fence in questions is a timeline_fence. So print the values directly instead of using a redirection. Additional to that remove the implementations from virtgpu and vgem. As far as I can see those were never used in the first place. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20250211163109.12200-3-christian.koenig@amd.com
2025-02-09drm/virtio: Add drm_panic supportRyosuke Yasuoka
Virtio gpu supports the drm_panic module, which displays a message to the screen when a kernel panic occurs. It is supported where it has vmapped shmem BO. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206104300.416014-1-ryasuoka@redhat.com
2025-01-25drm/virtio: Support partial maps of GEM objectsSasha Finkelstein
Those are useful to implement coherent cross-vm mmap. Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250109-virtgpu-gem-partial-map-v1-1-a914b48776bd@gmail.com Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: Corrected vm_size check to account vm_pgoff]
2025-01-19drm/virtio: Don't return error if virtio-gpu PCI dev is not foundVivek Kasireddy
While fixing a shared VGA resource ownership issue, commit 5dd8b536bbda ("drm/virtio: Lock the VGA resources during initialization") wrongly assumed that there is always a PCI device associated with virtio-gpu and it would return error if this device is not found during init. This is incorrect, as virtio-gpu can be operated in MMIO mode (M68K) where a PCI device would probably not be created for it. Therefore, fix this issue by not erroring out if the associated PCI device is not found during initialization. Fixes: 5dd8b536bbda ("drm/virtio: Lock the VGA resources during initialization") Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250114075759.2616551-1-vivek.kasireddy@intel.com Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250114075759.2616551-1-vivek.kasireddy@intel.com
2025-01-19drm/virtio: Fix UAF in virtgpu_dma_buf_free_obj()Vivek Kasireddy
Fix the following issues identified by Smatch static checker: - The call to dma_buf_put(attach->dmabuf) after dma_buf_detach() leads to a UAF bug as dma_buf_detach() frees the attach object. Fix this by extracting the dmabuf object from attach and using that in the call to dma_buf_put(). - The resv object is extracted from attach before checking to see if attach is valid (that is !NULL) or not. Although, attach would very likely be valid, fix this by making sure that the resv object is used only after ensuring that attach is valid. Fixes: 2885e575abc7 ("drm/virtio: Add helpers to initialize and free the imported object") Fixes: ca77f27a2665 ("drm/virtio: Import prime buffers from other devices as guest blobs") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241212055421.775759-1-vivek.kasireddy@intel.com Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: Edited commit title]
2025-01-09drm/virtio: Factor out common dmabuf unmapping codeDmitry Osipenko
Move out dmabuf detachment and unmapping into separate function. This removes duplicated code and there is no need to check the GEM's kref now, since both bo->attached and bo->sgt are unset under held reservation lock. Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241202053955.2451321-1-dmitry.osipenko@collabora.com
2025-01-09drm/virtio: Set missing bo->attached flagDmitry Osipenko
VirtIO-GPU driver now supports detachment of shmem BOs from host, but doing it only for imported dma-bufs. Mark all shmem BOs as attached, not just dma-bufs. This is a minor correction since detachment of a non-dmabuf BOs not supported today. Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129155357.2265357-1-dmitry.osipenko@collabora.com
2025-01-09drm/virtio: Lock the VGA resources during initializationVivek Kasireddy
If another driver for a VGA compatible GPU (that is passthrough'd) locks the VGA resources (by calling vga_get()), then virtio_gpu driver would encounter the following errors and fail to load during probe and initialization: Invalid read at addr 0x7200005014, size 1, region '(null)', reason: rejected Invalid write at addr 0x7200005014, size 1, region '(null)', reason: rejected virtio_gpu virtio0: virtio: device uses modern interface but does not have VIRTIO_F_VERSION_1 virtio_gpu virtio0: probe with driver virtio_gpu failed with error -22 This issue is only seen if virtio-gpu and the other GPU are on different PCI buses, which can happen if the user includes an additional PCIe port and associates the VGA compatible GPU with it while launching Qemu: qemu-system-x86_64... -device virtio-vga,max_outputs=1,xres=1920,yres=1080,blob=true -device pcie-root-port,id=pcie.1,bus=pcie.0,addr=1c.0,slot=1,chassis=1,multifunction=on -device vfio-pci,host=03:00.0,bus=pcie.1,addr=00.0 ... In the above example, the device 03:00.0 is an Intel DG2 card and this issue is seen when both i915 driver and virtio_gpu driver are loading (or initializing) concurrently or when i915 is loaded first. Note that during initalization, i915 driver does the following in intel_vga_reset_io_mem(): vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO); outb(inb(VGA_MIS_R), VGA_MIS_W); vga_put(pdev, VGA_RSRC_LEGACY_IO); Although, virtio-gpu might own the VGA resources initially, the above call (in i915) to vga_get_uninterruptible() would result in these resources being taken away, which means that virtio-gpu would not be able to decode VGA anymore. This happens in __vga_tryget() when it calls pci_set_vga_state(conflict->pdev, false, pci_bits, flags); where pci_bits = PCI_COMMAND_MEMORY | PCI_COMMAND_IO flags = PCI_VGA_STATE_CHANGE_DECODES | PCI_VGA_STATE_CHANGE_BRIDGE Therefore, to solve this issue, virtio-gpu driver needs to call vga_get() whenever it needs to reclaim and access VGA resources, which is during initial probe and setup. After that, a call to vga_put() would release the lock to allow other VGA compatible devices to access these shared VGA resources. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211064343.550153-1-vivek.kasireddy@intel.com Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
2025-01-09drm/virtio: Fix UAF in virtgpu_dma_buf_free_obj()Vivek Kasireddy
Fix the following issues identified by Smatch static checker: - The call to dma_buf_put(attach->dmabuf) after dma_buf_detach() leads to a UAF bug as dma_buf_detach() frees the attach object. Fix this by extracting the dmabuf object from attach and using that in the call to dma_buf_put(). - The resv object is extracted from attach before checking to see if attach is valid (that is !NULL) or not. Although, attach would very likely be valid, fix this by making sure that the resv object is used only after ensuring that attach is valid. Fixes: 2885e575abc7 ("drm/virtio: Add helpers to initialize and free the imported object") Fixes: ca77f27a2665 ("drm/virtio: Import prime buffers from other devices as guest blobs") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241212055421.775759-1-vivek.kasireddy@intel.com Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: Edited commit title]
2025-01-07drm/connector: make mode_valid take a const struct drm_display_modeDmitry Baryshkov
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge take a const struct drm_display_mode argument. Change the mode_valid callback of drm_connector to also take a const argument. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-09Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
The v6.13-rc2 release included a bunch of breaking changes, specifically the MODULE_IMPORT_NS commit. Backmerge in order to fix them before the next pull-request. Include the fix from Stephen Roswell. Caused by commit 25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths") Interacting with commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2024-12-05drm: remove driver date from struct drm_driver and all driversJani Nikula
We stopped using the driver initialized date in commit 7fb8af6798e8 ("drm: deprecate driver date") and (eventually) started returning "0" for drm_version ioctl instead. Finish the job, and remove the unused date member from struct drm_driver, its initialization from drivers, along with the common DRIVER_DATE macros. v2: Also update drivers/accel (kernel test robot) Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-11-26drm/virtio: Add prepare and cleanup routines for imported dmabuf objVivek Kasireddy
When an imported dmabuf obj is used as part of an atomic commit, we need to pin it as part of prepare and unpin it during cleanup of the associated FB, to make sure that it does not move until the commit is completed (and also while it is being used on the Host). Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241126031643.3490496-6-vivek.kasireddy@intel.com
2024-11-26drm/virtio: Import prime buffers from other devices as guest blobsVivek Kasireddy
By importing scanout buffers from other devices, we should be able to use the virtio-gpu driver in KMS only mode. Note that we attach dynamically and register a move_notify() callback so that we can let the VMM know of any location changes associated with the backing store of the imported object by sending detach_backing cmd. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: added kref check to move_notify] Link: https://patchwork.freedesktop.org/patch/msgid/20241126031643.3490496-5-vivek.kasireddy@intel.com
2024-11-26drm/virtio: Add helpers to initialize and free the imported objectVivek Kasireddy
The imported object can be considered a guest blob resource; therefore, we use create_blob cmd while creating it. These helpers are used in the next patch which does the actual import. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241126031643.3490496-4-vivek.kasireddy@intel.com
2024-11-26drm/virtio: Add a helper to map and note the dma addrs and lengthsVivek Kasireddy
This helper would be used when first initializing the object as part of import and also when updating the plane where we need to ensure that the imported object's backing is valid. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241126031643.3490496-3-vivek.kasireddy@intel.com
2024-11-26drm/virtio: Implement VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING cmdVivek Kasireddy
This cmd is useful to let the VMM (i.e, Qemu) know that the backing store associated with a resource is no longer valid, so that the VMM can perform any cleanup or unmap operations. The fence related changes and virtio_gpu_object_detach()/ virtio_gpu_detach_object_fenced() routines are extracted from a patch by Dmitry Osipenko <dmitry.osipenko@collabora.com>. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241126031643.3490496-2-vivek.kasireddy@intel.com
2024-11-18drm/virtio: New fence for every plane updateDongwon Kim
Having a fence linked to a virtio_gpu_framebuffer in the plane update sequence would cause conflict when several planes referencing the same framebuffer (e.g. Xorg screen covering multi-displays configured for an extended mode) and those planes are updated concurrently. So it is needed to allocate a fence for every plane state instead of the framebuffer. Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> [dmitry.osipenko@collabora.com: rebase, fix up, edit commit message] Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241020230803.247419-2-dmitry.osipenko@collabora.com
2024-11-18drm/virtio: Use drm_gem_plane_helper_prepare_fb()Dongwon Kim
Use drm_gem_plane_helper_prepare_fb() helper for explicit framebuffer synchronization. We need to wait for explicit fences in a case of Venus and native contexts when guest user space uses explicit fencing. Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> [dmitry.osipenko@collabora.com: edit commit message] Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241020230803.247419-1-dmitry.osipenko@collabora.com
2024-11-18drm/virtio: Don't create a context with default param if context_init is ↵Pierre-Eric Pelloux-Prayer
supported Xorg context creation fails for native contexts that use VIRTGPU_CONTEXT_INIT because context is already initialized implicitly when dumb buffer is created. Fix it by not creating default vrend context if context_init is supported. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241020224725.179937-1-dmitry.osipenko@collabora.com
2024-11-18drm/virtio: Use generic dumb_map_offset implementationPeter Shkenev
Currently, virtio uses its own dumb_map_offset implementation, virtio_gpu_mode_dumb_mmap. It works similarly to generic implementation, drm_gem_dumb_map_offset, and using the generic implementation is preferable (and making drivers to do so is a task stated on the DRM subsystem's TODO list). Thus, make driver use the generic implementation. This includes VIRTGPU_MAP ioctl so it cannot be used to circumvent rules imposed by drm_gem_dumb_map_offset (imported objects cannot be mapped). Signed-off-by: Peter Shkenev <mustela@erminea.space> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: cosmetic code improvements] Link: https://patchwork.freedesktop.org/patch/msgid/20241107141133.13624-1-mustela@erminea.space
2024-11-15drm/client: Move public client header to clients/ subdirectoryThomas Zimmermann
Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
2024-10-14drm/virtgpu: Use video aperture helpersThomas Zimmermann
DRM's aperture functions have long been implemented as helpers under drivers/video/ for use with fbdev. Avoid the DRM wrappers by calling the video functions directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930130921.689876-26-tzimmermann@suse.de
2024-09-26drm/virtgpu: Run DRM default client setupThomas Zimmermann
Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. The virtgpu driver specifies a preferred color mode of 32. As this is the default if no format has been given, leave it out entirely. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-62-tzimmermann@suse.de
2024-07-30Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-07-24drm/virtio: Fix type of dma-fence context variableDmitry Osipenko
Type of DMA fence context is u64. Fence-waiting code uses u32 for the context variable, fix it. Fixes: e4812ab8e6b1 ("drm/virtio: Refactor and optimize job submission code path") Cc: <stable@vger.kernel.org> # v6.4+ Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240714205009.3408298-1-dmitry.osipenko@collabora.com
2024-07-19Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Several new features here: - Virtio find vqs API has been reworked (required to fix the scalability issue we have with adminq, which I hope to merge later in the cycle) - vDPA driver for Marvell OCTEON - virtio fs performance improvement - mlx5 migration speedups Fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits) virtio: rename virtio_find_vqs_info() to virtio_find_vqs() virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info() virtio_balloon: convert to use virtio_find_vqs_info() virtiofs: convert to use virtio_find_vqs_info() scsi: virtio_scsi: convert to use virtio_find_vqs_info() virtio_net: convert to use virtio_find_vqs_info() virtio_crypto: convert to use virtio_find_vqs_info() virtio_console: convert to use virtio_find_vqs_info() virtio_blk: convert to use virtio_find_vqs_info() virtio: rename find_vqs_info() op to find_vqs() virtio: remove the original find_vqs() op virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly virtio: convert find_vqs() op implementations to find_vqs_info() virtio_pci: convert vp_*find_vqs() ops to find_vqs_info() virtio: introduce virtio_queue_info struct and find_vqs_info() config op virtio: make virtio_find_single_vq() call virtio_find_vqs() virtio: make virtio_find_vqs() call virtio_find_vqs_ctx() caif_virtio: use virtio_find_single_vq() for single virtqueue finding vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready() ...
2024-07-17virtio: rename virtio_find_vqs_info() to virtio_find_vqs()Jiri Pirko
Since the original virtio_find_vqs() is no longer present, rename virtio_find_vqs_info() back to virtio_find_vqs(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-20-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs(), have one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-18-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-05-27Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's start the new release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-05-23Merge tag 'trace-assign-str-v6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing cleanup from Steven Rostedt: "Remove second argument of __assign_str() The __assign_str() macro logic of the TRACE_EVENT() macro was optimized so that it no longer needs the second argument. The __assign_str() is always matched with __string() field that takes a field name and the source for that field: __string(field, source) The TRACE_EVENT() macro logic will save off the source value and then use that value to copy into the ring buffer via the __assign_str(). Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and __string() to not duplicate getting the string"), the __assign_str() needed the second argument which would perform the same logic as the __string() source parameter did. Not only would this add overhead, but it was error prone as if the __assign_str() source produced something different, it may not have allocated enough for the string in the ring buffer (as the __string() source was used to determine how much to allocate) Now that the __assign_str() just uses the same string that was used in __string() it no longer needs the source parameter. It can now be removed" * tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/treewide: Remove second parameter of __assign_str()
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-22drm/virtio: drop owner assignmentKrzysztof Kozlowski
virtio core already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20240331-module-owner-virtio-v2-13-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 18:55:23 +0000