| Age | Commit message (Collapse) | Author |
|---|
|
are multi display output on rk3588/rk3568
The all video ports of rk3568/rk3588 share the same OVL_LAYER_SEL
and OVL_PORT_SEL registers, and the configuration of these two registers
can be set to take effect when the vsync signal arrives at a certain Video
Port.
If two threads for two display output choose to update these two registers
simultaneously to meet their own plane adjustment requirements(change plane
zpos or switch plane from one crtc to another), then no matter which Video
Port'svsync signal we choose to follow for these two registers, the display
output of the other Video Port will be abnormal.
This is because the configuration of this Video Port does not take
effect at the right time (its configuration should take effect when its
VSYNC signal arrives).
In order to solve this problem, when performing plane migration or
change the zpos of planes, there are two things to be observed and
followed:
1. When a plane is migrated from one VP to another, the configuration of
the layer can only take effect after the Port mux configuration is
enabled.
2. When change the zpos of planes, we must ensure that the change for
the previous VP takes effect before we proceed to change the next VP.
Otherwise, the new configuration might overwrite the previous one for
the previous VP, or it could lead to the configuration of the previous
VP being take effect along with the VSYNC of the new VP.
This issue only occurs in scenarios where multi-display output is enabled.
Fixes: c5996e4ab109 ("drm/rockchip: vop2: Make overlay layer select register configuration take effect by vsync")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250421102156.424480-1-andyshrk@163.com
|
|
effect by vsync
Because the layer/window enable/disable is take effect by vsync, if the
overlay configuration of these layers does not follow vsync and
takes effect immediately instead, when multiple layers are dynamically
enable/disable, inconsistent display contents may be seen on the screen.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250318062024.4555-1-andyshrk@163.com
|
|
VOP2 on rk3576:
Three video ports:
VP0 Max 4096x2160
VP1 Max 2560x1600
VP2 Max 1920x1080
2 4K Cluster windows with AFBC/RFBC, line RGB and YUV
4 Esmart windows with line RGB/YUV support:
Esmart0/1: 4K
Esmart2/3: 2k, or worked together as a single 4K plane at shared
line buffer mode.
Compared to the previous VOP, another difference is that each VP
has its own independent vsync interrupt number.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-8-andyshrk@163.com
|
|
In the upcoming VOP of rk3576, a window cannot attach to all Video
Ports, we introduce a possible_vp_mask for every window to indicate
which Video Ports this window can attach to.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-3-andyshrk@163.com
|
|
There is a version number hardcoded in the VOP VERSION_INFO
register, and the version number increments sequentially based
on the production order of the SoC.
So using this version number to distinguish different VOP features
will simplify the code.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218112744.34433-7-andyshrk@163.com
|
|
In the upcoming VOP for rk3576, every VP has it's own LAYER_SEL
register, and the configuration value of each VP for the same
window maybe different, so extend the layer_sel_id to array,
let it can descption the layer select configuration value for
different VP.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218112744.34433-6-andyshrk@163.com
|
|
The VOP interface mux, overlay, background delay cycle configuration
of different SOC are much different. Add platform specific callback
ops to let the core driver look cleaner and more refined.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218112744.34433-4-andyshrk@163.com
|
|
This TRANSFORM_OFFSET register needs to be configured not only in
AFBC mode, but also in tile mode, so remove the AFBC/AFBCD prefix.
This also help avoid "exceeds 100 columns" warning from checkpatch.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218112744.34433-3-andyshrk@163.com
|
|
Move rockchip_drm_drv.h in rockchip_drm_vop2.h to fix the follow
sparse warning:
ARCH=arm64 LLVM=1 make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
mrproper defconfig all -j12
drivers/gpu/drm/rockchip/rockchip_vop2_reg.c:502:24: sparse:
warning: symbol 'vop2_platform_driver' was not declared. Should it
be static?
It is also beneficial for the upcoming support for rk3576.
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Min-Hua Chen <minhuadotchen@gmail.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-8-andyshrk@163.com
|
|
There are two AXI bus in vop2, windows attached on the same bus must
have a unique channel YUV and RGB channel ID.
The default IDs will conflict with each other on the rk3588, so they
need to be reassigned.
Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-4-andyshrk@163.com
|
|
/sys/kernel/debug/dri/vop2/summary: dump vop display state
/sys/kernel/debug/dri/vop2/regs: dump whole vop registers
/sys/kernel/debug/dri/vop2/active_regs: only dump the registers of
activated modules
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-2-andyshrk@163.com
|
|
The company name has update to Rockchip Electronics Co., Ltd.
since 2021.
And change Co.Ltd to Co., Ltd. to fix mail server warning:
DBL_SPAM(6.50)[co.ltd:url];
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214071333.3325308-1-andyshrk@163.com
|
|
Add support for gamma LUT in VOP2 driver. The implementation was inspired
by one found in VOP1 driver. Blue and red channels in gamma LUT register
write were swapped with respect to how gamma LUT values are written in
VOP1. Gamma LUT port selection was added before the write of new gamma LUT
table.
If the current SoC is rk356x, check if no other CRTC has gamma LUT enabled
in atomic_check (only one video port can use gamma LUT at a time) and
disable gamma LUT before the LUT table write.
If the current SoC isn't rk356x, "seamless" gamma lut update is performed
similarly to how it was done in the case of RK3399 in VOP1[1]. In seamless
update gamma LUT disable before the write isn't necessary, check if no
other CRTC has gamma LUT enabled is also not necessary, different register
is being used to select gamma LUT port[2] and after setting DSP_LUT_EN bit,
GAMMA_UPDATE_EN bit is set[3].
Gamma size is set and drm color management is enabled for each video port's
CRTC except ones which have no associated device.
Patch was tested on RK3566 (Pinetab2). When using userspace tools
which set eg. constant color temperature no issues were noticed. When
using userspace tools which adjust eg. color temperature the slight screen
flicker is visible probably because of gamma LUT disable needed in the
case of RK356x before gamma LUT write.
Compare behaviour of eg.:
```
gammastep -O 3000
```
To eg.:
```
gammastep -l 53:23 -t 6000:3000
```
In latter case color temperature is slowly adjusted at the beginning which
causes screen to slighly flicker. Then it adjusts every few seconds which
also causes slight screen flicker.
[1] https://lists.infradead.org/pipermail/linux-rockchip/2021-October/028132.html
[2] https://lore.kernel.org/linux-rockchip/48249708-8c05-40d2-a5d8-23de960c5a77@rock-chips.com/
[3] https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr1/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c#L3437
Helped-by: Daniel Stone <daniel@fooishbar.org>
Helped-by: Dragan Simic <dsimic@manjaro.org>
Helped-by: Diederik de Haas <didi.debian@cknow.org>
Helped-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Reviewed-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241101185545.559090-3-pZ010001011111@proton.me
|
|
VOP2_VP_FEATURE_OUTPUT_10BIT
VOP2 has multiple independent video ports with different
feature, so rename VOP_FEATURE_OUTPUT_10BIT to
VOP2_VP_FEATURE_OUTPUT_10BIT for more clearly meaning.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115931.1785495-1-andyshrk@163.com
|
|
VOP2 on rk3588:
Four video ports:
VP0 Max 4096x2160
VP1 Max 4096x2160
VP2 Max 4096x2160
VP3 Max 2048x1080
4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
4 4K Esmart windows with line RGB/YUV support
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115919.1785435-1-andyshrk@163.com
|
|
Set overlay mode register according to the
output mode is yuv or rgb.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115805.1785073-1-andyshrk@163.com
|
|
The output interface related definition can shared between
vop and vop2, move them to rockchip_drm_drv.h can avoid duplicated
definition.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115627.1784735-1-andyshrk@163.com
|
|
These structs are undefined and un used.
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013122036.1594090-1-andyshrk@163.com
|
|
The different VOP variants support different maximum resolutions. Reject
resolutions that are not supported by a specific variant.
This hasn't been a problem in the upstream driver so far as 1920x1080
has been the maximum resolution supported by the HDMI driver and that
resolution is supported by all VOP variants. Now with higher resolutions
supported in the HDMI driver we have to limit the resolutions to the
ones supported by the VOP.
The actual maximum resolutions are taken from the Rockchip downstream
Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[dropped the vdisplay > height check after talking to Sascha, as according to
the vendor code "Actually vop hardware has no output height limit"
(from vendor commit "drm/rockchip: vop: get rid of max_output.height check")
and the height-check broke the px30-minievb display]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-2-s.hauer@pengutronix.de
|
|
The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.
This driver has been derived from the downstream Rockchip Kernel and
heavily modified:
- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs
The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Co-Developed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
[dt-binding-header:]
Acked-by: Rob Herring <robh@kernel.org>
[moved dt-binding header from dt-nodes patch to here
and made checkpatch --strict happier]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-23-s.hauer@pengutronix.de
|
