Age | Commit message (Collapse) | Author |
|
Add DT support, by:
1. Creating a panel bridge from DT, and attaching it to the encoder,
2. Replacing the custom connector with a bridge connector,
3. Obtaining clock configuration based on the compatible value.
Note that for now the driver uses a fixed clock configuration selecting
the bus clock, as the current code to select other clock inputs needs
changes to support any other SoCs than SH7724.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6185ab76aa300fa402e4f6610b2109665f2d8a1c.1694767209.git.geert+renesas@glider.be
|
|
Complete the conversion to atomic mode setting by converting the
connector, and setting the DRIVER_ATOMIC flag.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/042f9ff076c4b1c87235c74c8b76c9d161e126ec.1694767209.git.geert+renesas@glider.be
|
|
Now the suspend/resume methods no longer need to look at internal driver
state, the dpms and started fields in the shmob_drm_crtc structure can
be removed, as well as the shmob_drm_crtc_dpms() wrapper. After this,
shmob_drm_crtc_atomic_{en,dis}able() became just wrappers around
shmob_drm_crtc_st{art,op}(), so inline the latter.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/905b9ca72f43d40438c8cb1199cde140eb123204.1694767209.git.geert+renesas@glider.be
|
|
Replace the custom suspend/resume handling by calls into
drm_mode_config_helper_{suspend,resume}().
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a52147ca6033e0a59675f37f0326c7404fc5919c.1694767209.git.geert+renesas@glider.be
|
|
Implement atomic mode setting for the CRTC, using the existing dpms
callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ca2a00200ef5ac899a6131087d0a30de1c806119.1694767209.git.geert+renesas@glider.be
|
|
Implement atomic mode setting for both the primary and overlay planes.
This involves:
- Moving the primary plane handling code from CRTC mode setting to
plane handling shared by primary and overlay planes,
- Adding basic CRTC and mode config atomic mode setting ops, which
don't do much yet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a6b698a1c8c1eaf631c2f928f5888ab5fe7aa4c3.1694767209.git.geert+renesas@glider.be
|
|
Most unused callbacks can be NULL pointers these days.
Drop a bunch of empty encoder callbacks.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/04f186573e1df90ecc051272f3d1cbe564c3469b.1694767209.git.geert+renesas@glider.be
|
|
The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.
Implement this using the drm_crtc_vblank_{on,off}() helpers.
Note that drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. This is performed at CRTC creation time, requiring vertical
blank initialization to be moved before creating CRTCs.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e5833e5706b7792bfca8e6e56fc154a7c3e0574f.1694767209.git.geert+renesas@glider.be
|
|
Turning a CRTC off will prevent a queued page flip from ever completing,
potentially confusing userspace. Wait for queued page flips to complete
before turning the CRTC off to avoid this.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c97d5859c43fa36043c61de28d67688ebe345092.1694767209.git.geert+renesas@glider.be
|
|
Move the shmob_drm_crtc_finish_page_flip() function up, to avoid having
to move it during the modification in the next change.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4c87bb31403d142f8f146176cb859a10a28a3601.1694767209.git.geert+renesas@glider.be
|
|
Rename the "connector" member of the shmob_drm_connector subclass
structure to "base", to improve readability.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2382c4c796b53b5d2b24f99b85954ce632f21b90.1694767209.git.geert+renesas@glider.be
|
|
Rename the "crtc" member of the shmob_drm_crtc subclass structure to
"base", to improve readability.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b42a32082d25bde6db7a57d8dc0d9f45820f6716.1694767209.git.geert+renesas@glider.be
|
|
Unify primary and overlay plane allocation:
- Enhance shmob_drm_plane_create() so it can be used to create the
primary plane, too,
- Move overlay plane creation next to primary plane creation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/adbc5febc0099fd1910f32a7af1c8e0f570f74b4.1694767209.git.geert+renesas@glider.be
|
|
Move legacy interface handling to the connector setup code.
Set up bus_flags and bus_formats in display_info according to the
bus format and panel information from platform data, to make it more
similar with DT-based connector/bridge/panel setup.
This will allow us to use the same LCD interface setup code for both
legacy and DT-based systems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/912f615eb87c847804a268200ab57c63453c65d4.1694767209.git.geert+renesas@glider.be
|
|
Replace the drm_mode_modeinfo field with videomode that includes more
signal polarity flags. This simplifies driver handling of panel modes
and prepares for DT support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Simplify]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4312e56de424d94399c6105e7159317eae86c9d5.1694767209.git.geert+renesas@glider.be
|
|
Now that drm_device is embedded in shmob_drm_device, we can use
a container_of()-based helper to get the shmob_drm_device pointer from
the drm_device, instead of using the deprecated drm_device.dev_private
field.
While at it, restore reverse Xmas tree ordering of local variable
declarations.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8ef4be8bffe75efc7f4b66f3732ec357f7d43e0f.1694767209.git.geert+renesas@glider.be
|
|
Replace to conversion helper macros using container_of() by static
inline functions, to improve type-safety.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7d1f1aa4b832499f9e527353ce0ad6d84ff9a74a.1694767209.git.geert+renesas@glider.be
|
|
Embedding drm_device in shmob_drm_device allows us to use the DRM
managed API to allocate both structures in one go, simplifying error
handling.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/abbf95021191824f44cc8c52e4afbde93d44363a.1694767209.git.geert+renesas@glider.be
|
|
SYS panels are not used, and have no defined DT bindings. Remove their
support to avoid impeding DT support. It can always be added back
later.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4ccca2a5ac05c73ea9fd6e44b8bc443fd9d14e0d.1694767209.git.geert+renesas@glider.be
|
|
The display info width_mm and height_mm fields are set at init time and
never overwritten, don't set them a second time when getting modes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/edd49fcb92af83d81df655b3db1685e8ed14380a.1694767209.git.geert+renesas@glider.be
|
|
Backlight support should be implemented by panels, not by the LCDC
driver. As the feature is currently unused anyway, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Cleanups]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/69707650245bc2193d072f24723d4d5482ea590b.1694767209.git.geert+renesas@glider.be
|
|
Improve the table containing hardware information related to the
supported plane formats:
1. Move (part of) the overlay format register settings from multiple
switch() statements spread across the code into the table, like is
already done for the primary plane register settings,
2. Remove the .yuv field, as that information can easily be extracted
from the register settings using a new helper macro,
3. Shrink and move the .bpp field to reduce table size.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b41f755e80ffe5fb4adbb2d8f96f2073de5c33bc.1694767209.git.geert+renesas@glider.be
|
|
The primary plane supports various YCbCr formats, and the CRTC code
already knows how to handle them. Enable support for the missing
formats by adding them to the table of supported modes.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e5a5d5ab2083280be5fcdc428e8b8ca198b4448d.1694767209.git.geert+renesas@glider.be
|
|
The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs
(clock domain on all, power domain on some). Hence it may not be
sufficient to manage the LCDC module clock explicitly (e.g. if the
selected clock source differs from SHMOB_DRM_CLK_BUS).
Fix this by using Runtime PM for all clock handling. Add an explicit
dependency on CONFIG_PM, which should already be met on all affected
platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e7359a64963bd9a4f1531c2beae850774ce140bc.1694767209.git.geert+renesas@glider.be
|
|
The first encoder output on the SH-Mobile LCD Controller is a DPI
parallel bus. However, at the time of introduction of the driver, no
encoder or connector types were defined yet for the DPI parallel bus,
hence the driver used the ones for LVDS instead.
Adjust the types accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/db500dd8356955d3471a1ccd68d90db9f9750ef9.1694767209.git.geert+renesas@glider.be
|
|
Create vendor specific renesas directory and move renesas drivers
to that directory.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|