summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/renesas/rz-du
AgeCommit message (Collapse)Author
2025-07-16drm: Pass the format info to .fb_create()Ville Syrjälä
Pass along the format information from the top to .fb_create() so that we can avoid redundant (and somewhat expensive) lookups in the drivers. Done with cocci (with some manual fixups): @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... ( - const struct drm_format_info *info = drm_get_format_info(...); | - const struct drm_format_info *info; ... - info = drm_get_format_info(...); ) <... - if (!info) - return ...; ...> } @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... } @find@ identifier fb_create_func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *fb_create_func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); @@ identifier find.fb_create_func; expression dev, file, mode_cmd; @@ fb_create_func(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create_with_dirty(dev, file + ,info ,mode_cmd) @@ expression dev, file_priv, mode_cmd; identifier info, fb; @@ info = drm_get_format_info(...); ... fb = dev->mode_config.funcs->fb_create(dev, file_priv + ,info ,mode_cmd); @@ identifier dev, file_priv, mode_cmd; @@ struct drm_mode_config_funcs { ... struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); ... }; v2: Fix kernel docs (Laurent) Fix commit msg (Geert) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <lumag@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Biju Das <biju.das.jz@bp.renesas.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: "Maíra Canal" <mcanal@igalia.com> Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux.dev Cc: spice-devel@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-5-ville.syrjala@linux.intel.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add function pointers for configuring VCLK ↵Lad Prabhakar
and mode validation Introduce `dphy_conf_clks` and `dphy_mode_clk_check` callbacks in `rzg2l_mipi_dsi_hw_info` to configure the VCLK and validate supported display modes. On the RZ/V2H(P) SoC, the DSI PLL dividers need to be as accurate as possible. To ensure compatibility with both RZ/G2L and RZ/V2H(P) SoCs, function pointers are introduced. Modify `rzg2l_mipi_dsi_startup()` to use `dphy_conf_clks` for clock configuration and `rzg2l_mipi_dsi_bridge_mode_valid()` to invoke `dphy_mode_clk_check` for mode validation. This change ensures proper operation across different SoC variants by allowing fine-grained control over clock configuration and mode validation. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-10-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add dphy_late_init() callback for RZ/V2H(P)Lad Prabhakar
Introduce the `dphy_late_init` callback in `rzg2l_mipi_dsi_hw_info` to allow additional D-PHY register configurations after enabling data and clock lanes. This is required for the RZ/V2H(P) SoC but not for the RZ/G2L SoC. Modify `rzg2l_mipi_dsi_startup()` to invoke `dphy_late_init` if defined, ensuring SoC-specific initialization is performed only when necessary. This change prepares for RZ/V2H(P) SoC support while maintaining compatibility with existing platforms. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-9-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add feature flag for 16BPP supportLad Prabhakar
Introduce the `RZ_MIPI_DSI_FEATURE_16BPP` flag in `rzg2l_mipi_dsi_hw_info` to indicate support for 16BPP pixel formats. The RZ/V2H(P) SoC supports 16BPP, whereas this feature is missing on the RZ/G2L SoC. Update the `mipi_dsi_host_attach()` function to check this flag before allowing 16BPP formats. If the SoC does not support 16BPP, return an error to prevent incorrect format selection. This change enables finer-grained format support control for different SoC variants. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-8-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency calculationsLad Prabhakar
Pass the HSFREQ in milli-Hz to the `dphy_init()` callback to improve precision, especially for the RZ/V2H(P) SoC, where PLL dividers require high accuracy. These changes prepare the driver for upcoming RZ/V2H(P) SoC support. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-7-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Make "rst" reset control optional for RZ/V2H(P)Lad Prabhakar
In preparation for adding support for the Renesas RZ/V2H(P) SoC, make the "rst" reset control optional in the MIPI DSI driver. The RZ/V2H(P) SoC does not provide this reset line, and attempting to acquire it using the mandatory API causes probe failure. Switching to devm_reset_control_get_optional_exclusive() ensures compatibility with both SoCs that provide this reset line and those that do not, such as RZ/V2H(P). Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-6-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add OF data supportLad Prabhakar
n preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch introduces a mechanism to pass SoC-specific information via OF data in the DSI driver. This enables the driver to adapt dynamically to various SoC-specific requirements without hardcoding configurations. The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one on the RZ/G2L SoC. While the LINK registers are shared between the two SoCs, the D-PHY registers differ. Also the VCLK range differs on both these SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is introduced and as now passed as OF data. These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by allowing SoC-specific data to be passed through OF. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-5-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculationLad Prabhakar
Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual VCLK rate instead of the mode clock. The relationship between HSCLK and VCLK is: vclk * bpp <= hsclk * 8 * lanes Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that HSFREQ accurately reflects the clock rate set in hardware, leading to better precision in data transmission. Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division when computing `hsfreq`. Also, update unit conversions to use correct scaling factors for better clarity and correctness. Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ threshold comparisons to use Hz instead of kHz to ensure correct behavior. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-4-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Simplify HSFREQ calculationLad Prabhakar
Simplify the high-speed clock frequency (HSFREQ) calculation by removing the redundant multiplication and division by 8. The updated equation: hsfreq = mode->clock * bpp / dsi->lanes; produces the same result while improving readability and clarity. Additionally, update the comment to clarify the relationship between HS clock bit frequency, HS byte clock frequency, and HSFREQ. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-3-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add min check for VCLK rangeLad Prabhakar
The VCLK range for Renesas RZ/G2L SoC is 5.803 MHz to 148.5 MHz. Add a minimum clock check in the mode_valid callback to ensure that the clock value does not fall below the valid range. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-2-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-09drm: renesas: rz-du: Implement MIPI DSI host transfersHugo Villeneuve
Add support for sending MIPI DSI command packets from the host to a peripheral. This is required for panels that need configuration before they accept video data. Also for long reads to work properly, set DCS maximum return packet size to the value of the DMA buffer size. Based on Renesas Linux kernel v5.10 repos [1]. Link: https://github.com/renesas-rz/rz_linux-cip.git Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Tested-by: Chris Brandt <Chris.Brandt@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250604145306.1170676-2-hugo@hugovil.com
2025-05-24drm: renesas: rz-du: Add support for RZ/V2H(P) SoCLad Prabhakar
The LCD controller (LCDC) on the RZ/V2H(P) SoC is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU). There is one LCDC unit available on the RZ/V2H(P) SoC which is connected to the DSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250512182330.238259-3-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-05-24drm: renesas: rz-du: Add atomic_pre_enableChris Brandt
When drm_panel.prepare_prev_first is set to true in a panel driver, the panel expects the MIPI DSI hardware to be already configured before the panel's prepare function is called because it might need to send DCS commands. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250521210335.3149065-1-chris.brandt@renesas.com
2025-05-23drm: convert many bridge drivers from devm_kzalloc() to ↵Luca Ceresoli
devm_drm_bridge_alloc() API devm_drm_bridge_alloc() is the new API to be used for allocating (and partially initializing) a private driver struct embedding a struct drm_bridge. For many drivers having a simple code flow in the probe function, this commit does a mass conversion automatically with the following semantic patch. The changes have been reviewed manually for correctness as well as to find any false positives. The patch has been applied with the explicit exclusion of bridge/panel.c, handled by a separate patch. After applying the semantic patch, manually fixed these issues: - 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling devm_drm_bridge_alloc() returns a pointer - re-added empty lines and comments that the script had removed but that should stay @@ type T; identifier C; identifier BR; expression DEV; expression FUNCS; @@ -T *C; +T *C; ... ( -C = devm_kzalloc(DEV, ...); -if (!C) - return -ENOMEM; +C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS); +if (IS_ERR(C)) + return PTR_ERR(C); | -C = devm_kzalloc(DEV, ...); -if (!C) - return ERR_PTR(-ENOMEM); +C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS); +if (IS_ERR(C)) + return PTR_ERR(C); ) ... -C->BR.funcs = FUNCS; Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640 Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640 Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com [Luca: fixed trivial patch conflict in adv7511_drv.c while applying] Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-05-14drm: rz-du: Support panels connected directly to the DPAD outputhienhuynh
This patch is based on the commit 73eb5476df72 ("drm: rcar-du: Support panels connected directly to the DPAD outputs"). The RZ DU driver assumes that a bridge is always connected to the DU output. This is valid for the HDMI output, but the DPAD output can be connected directly to a panel, in which case no bridge is available. To support this use case, detect whether the entities connected to the DU DPAD output is encoders or panels based on the number of ports of their DT node, and retrieve the corresponding type of DRM objects. For panels, additionally create panel bridge instances. Signed-off-by: hienhuynh <hien.huynh.px@renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Link: https://lore.kernel.org/r/20250508095042.25164-1-biju.das.jz@bp.renesas.com
2025-04-22drm: renesas: rz-du: rzg2l_mipi_dsi: Update the comment in ↵Biju Das
rzg2l_mipi_dsi_start_video() Add missing space in the comment in rzg2l_mipi_dsi_start_video(). Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/all/ZPg7STHDn4LbLy7f@duo.ucw.cz/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20250412061258.5447-1-biju.das.jz@bp.renesas.com
2025-04-11drm: renesas: Add zpos, alpha and blend properties to RZ/G2L DUBiju Das
Add support for zpos, alpha and blend properties to RZ/G2L DU driver as the IP supports all these properties. It is tested by the below modetest commands: modetest -M rzg2l-du -s 44@42:1920x1080@AR24 -d -P \ 37@42:512x300+200+200@XR15 modetest -M rzg2l-du -w {32,37}:alpha:{0,65535} modetest -M rzg2l-du -w {32,37}:zpos:{0,1} Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #On RZ/V2H Link: https://lore.kernel.org/r/20250404133047.172080-1-biju.das.jz@bp.renesas.com
2025-04-07drm: renesas: Extend RZ/G2L supported KMS formatsKieran Bingham
The RZ/G2L driver utilises the VSPD to read data from input sources. The rzg2l_du_kms component lists a restricted subset of the capabilities of the VSPD which prevents additional formats from being used for display planes. The supported display plane formats are mapped in rzg2l_du_vsp_formats[]. Extend the rzg2l_du_format_infos[] table with the corresponding mappings between the supported DRM formats and the formats exposed by the VSP in rzg2l_du_vsp_formats, maintaining the same ordering in both tables. The RPF module on VSPD supports various format conversion and send the image data to BRS(Blend ROP Sub Unit) for further processing. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Link: https://lore.kernel.org/r/20250330102357.56010-3-biju.das.jz@bp.renesas.com
2025-04-07drm: renesas: rz-du: Drop bpp variable from struct rzg2l_du_format_infoBiju Das
Drop the unused variable bpp from struct rzg2l_du_format_info. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20250330102357.56010-2-biju.das.jz@bp.renesas.com
2025-04-04drm: renesas: rz-du: Support dmabuf importLaurent Pinchart
The rz-du driver uses GEM DMA helpers, but does not implement the drm_driver .gem_prime_import_sg_table operation. This prevents importing dmabufs. Fix it by implementing the missing operation using the DRM_GEM_DMA_DRIVER_OPS_WITH_DUMB_CREATE() helper macro. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> # RZ/V2H + DSI Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250321104615.31809-1-laurent.pinchart+renesas@ideasonboard.com
2025-04-04drm: renesas: rz-du: Add Kconfig dependency between RZG2L_DU and RZG2L_MIPI_DSIBiju Das
Add Kconfig dependency between RZG2L_DU and RZG2L_MIPI_DSI, so that DSI module has functional dependency on DU. It is similar way that the R-Car MIPI DSI encoder is handled. While at it drop ARCH_RENESAS dependency as DRM_RZG2L_DU depend on ARCH_RZG2L. Suggested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240827163727.108405-1-biju.das.jz@bp.renesas.com
2025-03-20drm/bridge: Add encoder parameter to drm_bridge_funcs.attachMaxime Ripard
The drm_bridge structure contains an encoder pointer that is widely used by bridge drivers. This pattern is largely documented as deprecated in other KMS entities for atomic drivers. However, one of the main use of that pointer is done in attach to just call drm_bridge_attach on the next bridge to add it to the bridge list. While this dereferences the bridge->encoder pointer, it's effectively the same encoder the bridge was being attached to. We can make it more explicit by adding the encoder the bridge is attached to to the list of attach parameters. This also removes the need to dereference bridge->encoder in most drivers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_disableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_disable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_enableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_enable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-12-10drm: renesas: rz-du: rzg2l_du_encoder: Fix max dot clock for DPIBiju Das
As per the RZ/G2UL hardware manual Table 33.4 Clock List, the maximum dot clock for the DPI interface is 83.5 MHz. Add mode_valid callback to reject modes greater than 83.5 MHz. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241022082433.32513-3-biju.das.jz@bp.renesas.com
2024-12-10drm: renesas: rz-du: Drop DU_MCR0_DPI_OE macroBiju Das
The DPI_OE bit is removed from the latest RZ/G2UL and RZ/G2L hardware manual. So, drop this macro. Fixes: b330f1480172 ("drm: renesas: rz-du: Add RZ/G2UL DU Support") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241022082433.32513-2-biju.das.jz@bp.renesas.com
2024-12-09Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
The v6.13-rc2 release included a bunch of breaking changes, specifically the MODULE_IMPORT_NS commit. Backmerge in order to fix them before the next pull-request. Include the fix from Stephen Roswell. Caused by commit 25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths") Interacting with commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2024-12-05drm: remove driver date from struct drm_driver and all driversJani Nikula
We stopped using the driver initialized date in commit 7fb8af6798e8 ("drm: deprecate driver date") and (eventually) started returning "0" for drm_version ioctl instead. Finish the job, and remove the unused date member from struct drm_driver, its initialization from drivers, along with the common DRIVER_DATE macros. v2: Also update drivers/accel (kernel test robot) Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-02drm: renesas: rz-du: Increase supported resolutionsChris Brandt
The supported resolutions were misrepresented in earlier versions of hardware manuals. Fixes: 768e9e61b3b9 ("drm: renesas: Add RZ/G2L DU Support") Cc: stable@vger.kernel.org Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241120150328.4131525-1-chris.brandt@renesas.com
2024-12-01Get rid of 'remove_new' relic from platform driver structLinus Torvalds
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-15drm/client: Move public client header to clients/ subdirectoryThomas Zimmermann
Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
2024-09-26drm/renesas/rz-du: Run DRM default client setupThomas Zimmermann
Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. The rz-du driver specifies a preferred color mode of 32. As this is the default if no format has been given, leave it out entirely. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-35-tzimmermann@suse.de
2024-09-11Merge v6.11-rc7 into drm-nextSimona Vetter
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade. Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2024-09-03drm/bridge-connector: move to DRM_DISPLAY_HELPER moduleDmitry Baryshkov
drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard <mripard@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-08-26drm: renesas: rz-du: Add RZ/G2UL DU SupportBiju Das
The LCD controller is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU). It has DPI interface and supports a maximum resolution of WXGA along with 2 RPFs to support the blending of two picture layers and raster operations (ROPs). The DU module is connected to VSPD. Add RZ/G2UL DU support. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822162320.5084-3-biju.das.jz@bp.renesas.com
2024-08-26drm: renesas: Move RZ/G2L MIPI DSI driver to rz-duLad Prabhakar
All the RZ/G2L DU specific components are located under the rz-du folder, so it makes sense to move the RZ/G2L MIPI DSI driver there instead of keeping it in the rcar-du folder. This change improves the organization and modularity of the driver configuration by grouping related settings together. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625123244.200533-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2024-05-02drm/renesas/rz-du: Use fbdev-dmaThomas Zimmermann
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports damage handling, which is required by rz-du. Avoids the overhead of fbdev-generic's additional shadow buffering. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-30-tzimmermann@suse.de
2024-03-08Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get the latest fixes from drm-next; specifically the build fix from the patchset at [1]. Also fixes the build by removing an unused variable from rzg2l_du_vsp_atomic_flush(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/series/130720/ # 1
2024-02-22drm: renesas: rz-du: Fix redefinition errors related to rzg2l_du_vsp_*()Biju Das
CONFIG_DRM_RCAR_VSP is related to R-Car and not related to RZ/G2L specific. This caused the below build issue. Fix this errors by replacing CONFIG_DRM_RCAR_VSP->CONFIG_VIDEO_RENESAS_VSP1. While at it, use IS_ENABLED() macro. drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:47:6: error: redefinition of 'rzg2l_du_vsp_enable' 47 | void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) | ^~~~~~~~~~~~~~~~~~~ In file included from drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h:18, from drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:30: drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:72:20: note: previous definition of 'rzg2l_du_vsp_enable' with type 'void(struct rzg2l_du_crtc *)' 72 | static inline void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) { }; | ^~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:61:6: error: redefinition of 'rzg2l_du_vsp_disable' 61 | void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) | ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:73:20: note: previous definition of 'rzg2l_du_vsp_disable' with type 'void(struct rzg2l_du_crtc *)' 73 | static inline void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) { }; | ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:66:6: error: redefinition of 'rzg2l_du_vsp_atomic_flush' 66 | void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:74:20: note: previous definition of 'rzg2l_du_vsp_atomic_flush' with type 'void(struct rzg2l_du_crtc *)' 74 | static inline void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) { }; | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:76:19: error: redefinition of 'rzg2l_du_vsp_get_drm_plane' 76 | struct drm_plane *rzg2l_du_vsp_get_drm_plane(struct rzg2l_du_crtc *crtc, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:75:33: note: previous definition of 'rzg2l_du_vsp_get_drm_plane' with type 'struct drm_plane *(struct rzg2l_du_crtc *, unsigned int)' 75 | static inline struct drm_plane *rzg2l_du_vsp_get_drm_plane(struct rzg2l_du_crtc *crtc, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:302:5: error: redefinition of 'rzg2l_du_vsp_init' 302 | int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np, | ^~~~~~~~~~~~~~~~~ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:66:19: note: previous definition of 'rzg2l_du_vsp_init' with type 'int(struct rzg2l_du_vsp *, struct device_node *, unsigned int)' 66 | static inline int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np, | ^~~~~~~~~~~~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-next/20240222124610.383e1ce3@canb.auug.org.au/T/#u Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 768e9e61b3b9 ("drm: renesas: Add RZ/G2L DU Support") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240222112643.110326-1-biju.das.jz@bp.renesas.com
2024-02-21drm: renesas: Add RZ/G2L DU SupportBiju Das
The LCD controller is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU). It has DPI/DSI interfaces and supports a maximum resolution of 1080p along with 2 RPFs to support the blending of two picture layers and raster operations (ROPs). The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L alike SoCs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20240218164840.57662-4-biju.das.jz@bp.renesas.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 08:04:19 +0000