Age | Commit message (Collapse) | Author |
|
This patch adds 64-bit register accessors to simplify register access in
Panthor. It also adds 32-bit and 64-bit variants for read_poll_timeout.
This patch also updates Panthor to use the new 64-bit accessors and poll
functions.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://lore.kernel.org/r/20250606101835.41840-2-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Kernel BO's aren't exposed to UM, so labelling them is the responsibility
of the driver itself. This kind of tagging will prove useful in further
commits when want to expose these objects through DebugFS.
Expand panthor_kernel_bo_create() interface to take a NUL-terminated
string. No bounds checking is done because all label strings are given
as statically-allocated literals, but if a more complex kernel BO naming
scheme with explicit memory allocation and formatting was desired in the
future, this would have to change.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250423021238.1639175-4-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
MMU handler needs to be in control of the job interrupt clears because
clearing the interrupt also unblocks the writer/reader that triggered
the fault, and we don't want it to be unblocked until we've had a chance
to process the IRQ.
Since clearing the clearing is just one line, let's make it explicit
instead of doing it in the generic code path.
Note that this commit changes the existing behavior in that the MMU
COMPLETED irqs are no longer cleared, which is fine because they are
masked, so we're not risking an interrupt flood.
Changes in v3:
- Mention the fact we no longer clear MMU COMPLETED irqs
- Add Liviu's R-b
Changes in v2:
- Move the MMU_INT_CLEAR around
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250404080933.2912674-5-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Assigning a string to an array which is too small to include the NUL
byte at the end causes a warning on some compilers. But this function
also has some other oddities like the 'header' array which is only ever
used within sizeof().
Tidy up the function by removing the 'header' array, allow the NUL byte
to be present in git_sha_header, and calculate the length directly from
git_sha_header.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20250213154237.GA11897@willie-the-truck/
Fixes: 9d443deb0441 ("drm/panthor: Display FW version information")
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213161248.1642392-1-steven.price@arm.com
|
|
Remove unused function declaration in panthor_gem.h:
- `panthor_gem_prime_import_sg_table()`
Remove duplicate macro definitions:
- `MAX_CSG_PRIO`
- `MIN_CS_PER_CSG`
- `MIN_CSGS`
Signed-off-by: Florent Tomasin <florent.tomasin@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173310.88329-1-florent.tomasin@arm.com
|
|
If we do a GPU soft-reset, that's no longer fast reset. This also means
the slow reset fallback doesn't work because the MCU state is only reset
after a GPU soft-reset.
Let's move the retry logic to panthor_device_resume() to issue a
soft-reset between the fast and slow attempts, and patch
panthor_gpu_suspend() to only power-off the L2 when a fast reset is
requested.
v3:
- No changes
v2:
- Add R-b
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-6-boris.brezillon@collabora.com
|
|
The runtime PM resume operation is not guaranteed to succeed, but if it
fails, the device should be in a suspended state. Make sure we're robust
to resume failures in the unplug path.
v3:
- Fix typo
- Add R-bs
v2:
- Move the bit that belonged in the next commit
- Drop the panthor_device_unplug() changes
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Adrian Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-3-boris.brezillon@collabora.com
|
|
Drop the _RD_ in the flag names.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113160257.2002333-1-boris.brezillon@collabora.com
|
|
Commit 498893bd596e ("drm/panthor: Simplify FW fast reset path") forgot
to copy the definition of glb_iface when it move one line of code.
Fixes: 498893bd596e ("drm/panthor: Simplify FW fast reset path")
Link: https://lore.kernel.org/dri-devel/20241119164455.572771-1-liviu.dudau@arm.com/
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Stop checking the FW halt_status as MCU_STATUS should be sufficient.
This should make the check for successful FW halt and subsequently
setting fast_reset to true more robust.
We should also clear GLB_REQ.GLB_HALT bit only on post-reset prior
to starting the FW and only if we're doing a fast reset, because
the slow reset will re-initialize all FW sections, including the
global interface.
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20241119135030.3352939-1-karunika.choo@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge Linus tree for some drm-fixes needed for msm and xe merges.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The system and GPU MMU page size might differ, which becomes a
problem for FW sections that need to be mapped at explicit addresses
since our PAGE_SIZE alignment might cover a VA range that's
expected to be used for another section.
Make sure we never map more than we need.
Changes in v3:
- Add R-bs
Changes in v2:
- Plan for per-VM page sizes so the MCU VM and user VM can
have different pages sizes
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030150231.768949-1-boris.brezillon@collabora.com
|
|
The version number output when loading the firmware is actually the
interface version not the version of the firmware itself. Update the
message to make this clearer.
However, the firmware binary has a git SHA embedded into it which can be
used to identify which firmware binary is being loaded. So output this
as a drm_info() so that it's obvious from a dmesg log which firmware
binary is being used.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906094025.638173-1-steven.price@arm.com
|
|
In the off-chance that waiting for the firmware to signal its booted status
timed out in the fast reset path, one must flush the cache lines for the
entire FW VM address space before reloading the regions, otherwise stale
values eventually lead to a scheduler job timeout.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902130237.3440720-1-adrian.larumbe@collabora.com
|
|
This way get NULL derefs instead of use-after-free if the FW VM is
referenced after the device has been unplugged.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-4-boris.brezillon@collabora.com
|
|
Avoids use-after-free situations when panthor_fw_unplug() is called
and the kernel BO was mapped to the FW VM.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-3-boris.brezillon@collabora.com
|
|
In the post_reset function, if the fast reset didn't succeed, we
are not clearing the fast_reset flag, which prevents firmware
sections from being reloaded. While at it, use panthor_fw_stop()
instead of manually writing DISABLE to the MCU_CONTROL register.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430113727.493155-1-boris.brezillon@collabora.com
|
|
The ->iface.streams[csg_slot][] array has MAX_CS_PER_CSG elements so
this > comparison needs to be >= to prevent an out of bounds access.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62835c16-c85c-483d-a8fe-63be78d49d15@moroto.mountain
|
|
Contains everything that's FW related, that includes the code dealing
with the microcontroller unit (MCU) that's running the FW, and anything
related to allocating memory shared between the FW and the CPU.
A few global FW events are processed in the IRQ handler, the rest is
forwarded to the scheduler, since scheduling is the primary reason for
the FW existence, and also the main source of FW <-> kernel
interactions.
v6:
- Add Maxime's and Heiko's acks
- Keep header inclusion alphabetically ordered
v5:
- Fix typo in GLB_PERFCNT_SAMPLE definition
- Fix unbalanced panthor_vm_idle/active() calls
- Fallback to a slow reset when the fast reset fails
- Add extra information when reporting a FW boot failure
v4:
- Add a MODULE_FIRMWARE() entry for gen 10.8
- Fix a wrong return ERR_PTR() in panthor_fw_load_section_entry()
- Fix typos
- Add Steve's R-b
v3:
- Make the FW path more future-proof (Liviu)
- Use one waitqueue for all FW events
- Simplify propagation of FW events to the scheduler logic
- Drop the panthor_fw_mem abstraction and use panthor_kernel_bo instead
- Account for the panthor_vm changes
- Replace magic number with 0x7fffffff with ~0 to better signify that
it's the maximum permitted value.
- More accurate rounding when computing the firmware timeout.
- Add a 'sub iterator' helper function. This also adds a check that a
firmware entry doesn't overflow the firmware image.
- Drop __packed from FW structures, natural alignment is good enough.
- Other minor code improvements.
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229162230.2634044-9-boris.brezillon@collabora.com
|