| Age | Commit message (Collapse) | Author |
|---|
|
Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC
flags. Those are used by various bridges(e.g. dw-mipi-dsi) in the
pipeline to correctly configure its sync signals polarity.
Tested on rk3568/rk3576/rk3588 EVB.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250618080955.691048-1-andyshrk@163.com
|
|
The DSI host has different modes in prepare() and enable() functions,
prepare() is in LP command mode and enable() is in HS video mode.
>From our experience, generally the initialization sequence needs to be
sent in the LP command mode.
Move the setup init function from enable() to prepare() to fix a display
shift on rk3568 evb.
Tested on rk3568/rk3576/rk3588 EVB.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250618091520.691590-1-andyshrk@163.com
|
|
Although the datasheet of the panel module describes that it has a
reset pin, in the actual hardware design, we often use an RC circuit
to control the reset, and rarely use GPIO to control the reset. This
is the way it is done on our numerous development boards (such as
RK3568/RK3576 EVB).
So make the reset-gpio optional.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250616070536.670519-2-andyshrk@163.com
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250529-b4-drm_panel_mass_driver_convert_part3-v2-3-5d75a3711e40@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The Rockchip W552793DBA-V10 display/touchscreen board contains a
Wanchanglong W552793BAA panel, which in turn is using a Raydium
RM67200 MIPI-DSI controller. Add a DSI panel driver for it.
The W552793BAA panel init sequence has been taken from the RK3588
EVB1 vendor kernel devicetree.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250225-raydium-rm67200-v3-2-d9e1010dd8ab@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250225-raydium-rm67200-v3-2-d9e1010dd8ab@kernel.org
|
