summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
AgeCommit message (Collapse)Author
2022-11-09drm/nouveau/pmu/gm20b,gp10b: boot RTOS from PMU initBen Skeggs
Cleanup before falcon changes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2022-11-09drm/nouveau/pmu: move init() falcon reset to non-nvfw codeBen Skeggs
Cleanup before falcon changes. - fixes (attempt at?) reset of pmu while rtos is running, on gm20b v2: - remove extra whitespace Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2022-11-09drm/nouveau/pmu: move preinit() falcon reset to devinitBen Skeggs
Cleanup before falcon changes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2021-11-12drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACRBen Skeggs
There have been reports of the WFI timing out on some boards, and a patch was proposed to just remove it. This stuff is rather fragile, and I believe the WFI might be needed with our FW prior to GM200. However, we probably should not be touching PMU during init on GPUs where we depend on NVIDIA FW, outside of limited circumstances, so this should be a somewhat safer change that achieves the desired result. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
2021-02-11drm/nouveau/pmu: switch to instanced constructorBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2021-02-11drm/nouveau/subdev: store full subdev name in structBen Skeggs
Much easier to store this to avoid having to reconstruct a string for a specific subdev, taking into account whether it's instanced or not. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2021-02-11drm/nouveau/pmu: serialise send() with private mutexBen Skeggs
nvkm_subdev.mutex is going away. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-01-15drm/nouveau/secboot: move code to boot LS falcons to subdevsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: move handling of init message to subdevsBen Skeggs
When the PMU/SEC2 LS FWs have booted, they'll send a message to the host with various information, including the configuration of message/command queues that are available. Move the handling for this to the relevant subdevs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: split the condition for queue readiness vs pmu acr ↵Ben Skeggs
readiness This is to allow for proper separation of the LS interface code from the queue handling code. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: explicitly create message queue from subdevsBen Skeggs
Code to interface with LS firmwares is being moved to the subdevs where it belongs, rather than living in the common falcon code. This is an incremental step towards that goal. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: explicitly create command queue(s) from subdevsBen Skeggs
Code to interface with LS firmwares is being moved to the subdevs where it belongs, rather than living in the common falcon code. This is an incremental step towards that goal. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/qmgr: explicitly create queue manager from subdevsBen Skeggs
Code to interface with LS firmwares is being moved to the subdevs where it belongs, rather than living in the common falcon code. This is an incremental step towards that goal. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/pmu: initialise SW state for falcon from constructorBen Skeggs
This will allow us to register the falcon with ACR, and further customise its behaviour by providing the nvkm_falcon_func structure directly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/pmu: select implementation based on available firmwareBen Skeggs
This will allow for further customisation of the subdev depending on what firmware is available. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-08-23drm/nouveau/therm: don't attempt fan control where PMU is already managing itBen Skeggs
There's already a condition in place which attempts to detect this, but since we've begun to require a PMU subdev even on boards where we don't load a custom FW, it's become inaccurate. This will prevent unnecessarily running a periodic fan update thread on GP100 and newer, where we don't yet override the default PMU FW. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-08-22drm/nouveau/pmu/gt215-: abstract detection of whether reset is neededBen Skeggs
GT215, GF100-GP100, and GP10x are all different. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/falcon: delay construction of falcons to oneinit()Alexandre Courbot
Reading registers at device construction time can be harmful, as there is no guarantee the underlying engine will be up, or in its runtime configuration. Defer register reading to the oneinit() hook and update users accordingly. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/pmu: add msgqueue memberAlexandre Courbot
NVIDIA-provided PMU firmware is controlled by a msgqueue. Add a member to the PMU structure as well as the required cleanup code if this feature is used. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-03-07drm/nouveau/pmu: make sure the reset hook exists before running itAlexandre Courbot
Some PMU implementations (in particular the ones managed by secure boot) may not have a reset() hook. Make sure we don't crash in that case. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-02-17drm/nouveau/pmu: instanciate the falcon in PMU deviceAlexandre Courbot
Have an instance of nvkm_falcon in the PMU structure, ready to be used by other subdevs (i.e. secboot). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-02-17drm/nouveau/pmu: add nvkm_pmu_ctor() functionAlexandre Courbot
Add a PMU constructor so implementations that extend the nvkm_pmu structure can have all base members properly initialized. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-11-17drm/nouveau/pmu: execute reset before running devinitBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-11-17drm/nouveau/pmu: move ucode handling into gt215 implementationBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-05-20drm/nouveau/core: remove pmc_enable argument from subdev ctorBen Skeggs
These are now specified directly in the MC subdev. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-05-20drm/nouveau/pmu: be more strict about lockingKarol Herbst
When we start communicating with the pmu a bit more, the current code is a real issue. I encountered a dead lock here, while testing my dynamic reclocking code Signed-off-by: Karol Herbst <nouveau@karolherbst.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-11-03drm/nouveau/pmu: do not assume a PMU is presentAlexandre Courbot
Some devices may not have a PMU. Avoid a NULL pointer dereference in such cases by checking whether the pointer given to nvkm_pmu_pgob() is valid. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-08-28drm/nouveau/pmu: convert to new-style nvkm_subdevBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-08-28drm/nouveau/subdev: rename some functions to avoid upcoming conflictsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-08-28drm/nouveau/pmu: switch to subdev printk macrosBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-08-28drm/nouveau/pmu: switch to new-style timer macrosBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-08-28drm/nouveau/pmu: switch to device pri macrosBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-08-28drm/nouveau/pmu: cosmetic changesBen Skeggs
This is purely preparation for upcoming commits, there should be no code changes here. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-01-22drm/nouveau/pmu: namespace + nvidia gpu names (no binary change)Ben Skeggs
The namespace of NVKM is being changed to nvkm_ instead of nouveau_, which will be used for the DRM part of the driver. This is being done in order to make it very clear as to what part of the driver a given symbol belongs to, and as a minor step towards splitting the DRM driver out to be able to stand on its own (for virt). Because there's already a large amount of churn here anyway, this is as good a time as any to also switch to NVIDIA's device and chipset naming to ease collaboration with them. A comparison of objdump disassemblies proves no code changes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-01-22drm/nouveau/pmu: rename from pwr (no binary change)Ben Skeggs
Switch to NVIDIA's name for the device. The namespace of NVKM is being changed to nvkm_ instead of nouveau_, which will be used for the DRM part of the driver. This is being done in order to make it very clear as to what part of the driver a given symbol belongs to, and as a minor step towards splitting the DRM driver out to be able to stand on its own (for virt). Because there's already a large amount of churn here anyway, this is as good a time as any to also switch to NVIDIA's device and chipset naming to ease collaboration with them. A comparison of objdump disassemblies proves no code changes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 20:33:43 +0000