| Age | Commit message (Collapse) | Author |
|---|
|
This commit adds support for the GB20x GPUs found on GeForce RTX 50xx
series boards.
Beyond a few miscellaneous register moves and HW class ID plumbing,
this reuses most of the code added to support GH100/GB10x.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit enables basic support for the GB100/GB102 Blackwell GPUs.
Beyond HW class ID plumbing there's very little change here vs GH100.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit enables basic support for Hopper GPUs, and is intended
primarily as a base supporting Blackwell GPUs, which reuse most of
the code added here.
Advanced features such as Confidential Compute are not supported.
Beyond a few miscellaneous register moves and HW class ID plumbing,
the bulk of the changes implemented here are to support the GSP-RM
boot sequence used on Hopper/Blackwell GPUs, as well as a new page
table layout.
There should be no changes here that impact prior GPUs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Co-developed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
GPUs exist now with a 64-bit BAR0, which mean that BAR1 and BAR2's
indices (as passed to pci_resource_len() etc) are bumped up by one.
Modify nvkm_device.resource_addr/size() to take an enum instead of
an integer bar index, and take IORESOURCE_MEM_64 into account when
translating to the "raw" bar id.
[airlied: fixup ERR_PTR]
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The current code using NV90F1_CTRL_CMD_VASPACE_COPY_SERVER_RESERVED_PDES
not only requires changes to support the new page table layout used on
Hopper/Blackwell GPUs, but is also broken in that it always mirrors the
PDEs used for virtual address 0, rather than the area reserved for RM.
This works fine for the non-NVK case where the kernel has full control
of the VMM layout and things end up in the right place, but NVK puts
its kernel reserved area much higher in the address space.
Fixing the code to work at any VA is not enough as some parts of RM want
the reserved area in a specific location, and NVK would then hit other
assertions in RM instead.
Fortunately, it appears that RM never needs to allocate anything within
its reserved area for DRM clients, and the COPY_SERVER_RESERVED_PDES
control call primarily serves to allow RM to locate the root page table
when initialising a channel's instance block.
Flag VMMs allocated by the DRM driver as externally owned, and use
NV0080_CTRL_CMD_DMA_SET_PAGE_DIRECTORY to inform RM of the root page
table in a similar way to NVIDIA's UVM driver.
The COPY_SERVER_RESERVED_PDES paths are kept for the golden context
image and gr scrubber channel, where RM needs the reserved area.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
These registers have moved on GH100/GBxxx, and the GSP-RM init code uses
hardcoded values from earlier GPUs to fill GspSystemInfo.
Replace the per-GPU accessors in nvkm_pci_func with region info, and use
it when initialising GspSystemInfo.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add r570-specific HAL routines, and support loading of GSP-RM version
570.144 if firmware is available.
There should be no impact on r535, or non-GSP paths.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
