| Age | Commit message (Collapse) | Author |
|---|
|
Each phy version is tightly coupled with the corresponding PLL code,
there is no need to keep them separate. Fuse source files together in
order to simplify DSI code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
DRM_DEV_ERROR should be used across this entire source: convert the
pr_err prints to the first as a cleanup.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value
directly, but the same value was also being specified in the
dsi_pll_regs struct pll_lockdet_rate variable: let's use it!
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The number of fractional registers bits is known and already set in
the frac_bits variable of the dsi_pll_config struct here in 10nm:
remove the TODO by simply using that variable.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In function dsi_pll_calc_dec_frac we are calculating the decimal
div start parameter by dividing the decimal multiple by the
fractional multiplier: the remainder of that operation is stored
to then get programmed to the fractional divider registers of
the PLL.
It's useless to call div_u64_rem to get the remainder and *then*
call div_u64 to get the division result, as the first is already
giving that result: let's fix it by just caring about the result
of div_u64_rem.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
PHY disable/enable resets PLL registers to default values. Thus in
addition to restoring several registers we also need to restore VCO rate
settings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly")
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
For a given byte clock, if VCO recalc value is exactly same as
vco set rate value, vco_set_rate does not get called assuming
VCO is already set to required value. But Due to GDSC toggle,
VCO values are erased in the HW. To make sure VCO is programmed
correctly, we forcefully call set_rate from vco_prepare.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
After commit fc0c209c147f ("clk: Allow parents to be specified without
string names") we can use DT or direct clk_hw pointers to specify
parents. Create a generic function that shouldn't be used very often to
encode the multitude of ways of registering a mux clk with different
parent information. Then add a bunch of wrapper macros that only pass
down what needs to be passed down to the generic function to support
this with less arguments.
Note: the msm drm driver passes an anonymous array through the macro
which seems to confuse my compiler. Adding a parenthesis around the
whole thing at the call site seems to fix it but it must be wrong. Maybe
it's better to split this patch and pick out the array bits there?
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-11-sboyd@kernel.org
|
|
While I'm in here, cut this out, pdev can't be NULL
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-2-sean@poorly.run
|
|
The 10nm pll driver didn't have any failure-path cleanup in register,
and the destroy function didn't unregister any of the hardware. This
patch adds both.
The reason things haven't been blowing up horribly is that msm_drv has a
reference count issue that keeps devices alive, so the destroy function
was never called. That will be fixed in a follow-up patch.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-1-sean@poorly.run
|
|
Pull drm updates from Dave Airlie:
"Core:
- shared fencing staging removal
- drop transactional atomic helpers and move helpers to new location
- DP/MST atomic cleanup
- Leasing cleanups and drop EXPORT_SYMBOL
- Convert drivers to atomic helpers and generic fbdev.
- removed deprecated obj_ref/unref in favour of get/put
- Improve dumb callback documentation
- MODESET_LOCK_BEGIN/END helpers
panels:
- CDTech panels, Banana Pi Panel, DLC1010GIG,
- Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
- Himax HX8357D, simulated RTSM AEMv8.
- GPD Win2 panel
- AUO G101EVN010
vgem:
- render node support
ttm:
- move global init out of drivers
- fix LRU handling for ghost objects
- Support for simultaneous submissions to multiple engines
scheduler:
- timeout/fault handling changes to help GPU recovery
- helpers for hw with preemption support
i915:
- Scaler/Watermark fixes
- DP MST + powerwell fixes
- PSR fixes
- Break long get/put shmemfs pages
- Icelake fixes
- Icelake DSI video mode enablement
- Engine workaround improvements
amdgpu:
- freesync support
- GPU reset enabled on CI, VI, SOC15 dGPUs
- ABM support in DC
- KFD support for vega12/polaris12
- SDMA paging queue on vega
- More amdkfd code sharing
- DCC scanout on GFX9
- DC kerneldoc
- Updated SMU firmware for GFX8 chips
- XGMI PSP + hive reset support
- GPU reset
- DC trace support
- Powerplay updates for newer Polaris
- Cursor plane update fast path
- kfd dma-buf support
virtio-gpu:
- add EDID support
vmwgfx:
- pageflip with damage support
nouveau:
- Initial Turing TU104/TU106 modesetting support
msm:
- a2xx gpu support for apq8060 and imx5
- a2xx gpummu support
- mdp4 display support for apq8060
- DPU fixes and cleanups
- enhanced profiling support
- debug object naming interface
- get_iova/page pinning decoupling
tegra:
- Tegra194 host1x, VIC and display support enabled
- Audio over HDMI for Tegra186 and Tegra194
exynos:
- DMA/IOMMU refactoring
- plane alpha + blend mode support
- Color format fixes for mixer driver
rcar-du:
- R8A7744 and R8A77470 support
- R8A77965 LVDS support
imx:
- fbdev emulation fix
- multi-tiled scalling fixes
- SPDX identifiers
rockchip
- dw_hdmi support
- dw-mipi-dsi + dual dsi support
- mailbox read size fix
qxl:
- fix cursor pinning
vc4:
- YUV support (scaling + cursor)
v3d:
- enable TFU (Texture Formatting Unit)
mali-dp:
- add support for linear tiled formats
sun4i:
- Display Engine 3 support
- H6 DE3 mixer 0 support
- H6 display engine support
- dw-hdmi support
- H6 HDMI phy support
- implicit fence waiting
- BGRX8888 support
meson:
- Overlay plane support
- implicit fence waiting
- HDMI 1.4 4k modes
bridge:
- i2c fixes for sii902x"
* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
drm/amd/display: Add fast path for cursor plane updates
drm/amdgpu: Enable GPU recovery by default for CI
drm/amd/display: Fix duplicating scaling/underscan connector state
drm/amd/display: Fix unintialized max_bpc state values
Revert "drm/amd/display: Set RMX_ASPECT as default"
drm/amdgpu: Fix stub function name
drm/msm/dpu: Fix clock issue after bind failure
drm/msm/dpu: Clean up dpu_media_info.h static inline functions
drm/msm/dpu: Further cleanups for static inline functions
drm/msm/dpu: Cleanup the debugfs functions
drm/msm/dpu: Remove dpu_irq and unused functions
drm/msm: Make irq_postinstall optional
drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
drm/msm/dpu: Remove unused functions
drm/msm/dpu: Remove dpu_crtc_is_enabled()
drm/msm/dpu: Remove dpu_crtc_get_mixer_height
drm/msm/dpu: Remove dpu_dbg
drm/msm: dpu: Remove crtc_lock
drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
drm/msm: dpu: Separate crtc assignment from vblank enable
...
|
|
Fix the dsi clock names in the DSI 10nm PLL driver to
match the names in the dispcc driver as those are
according to the clock plan of the chipset.
Changes in v2:
- Update the clock diagram with the new clock name
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate
drm-formatted specific log messages so that it will be easy to
differentiate in case of multiple instances of driver.
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.
Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
postdiv_lock spinlock was used before initialization
for 10nm pll. It causes following spin_bug:
"BUG: spinlock bad magic on CPU#0".
Initialize spinlock before its usage.
Changes in v3:
- Added Archit's R-b
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Populate PLL clock ops from downstream. This contains the VCO PLL
ops and the registration of standard clk_divider and clk_mux clocks.
Unlike 14nm PLL, the postdividers/mux of the slave PLL doesn't need
to be set to the same values of the postdivs/mux of the master PLL.
Hence, we don't need special postdivider clock ops like we did with
the 14nm PLL driver.
Like the previous PLL drivers, the implementation is slightly different
from downstream. We don't use shadow clocks, but have the ability to
reparent the RCGs to a different source.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add new 10nm DSI PLL/PHY files that will be used on SDM845.
Just populate empty pll/phy funcs for now. These will be filled up
later.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
