| Age | Commit message (Collapse) | Author |
|---|
|
Per-segment link training requires knowing the number of LTTPRs
(if any) present. Store the count during LTTPRs' initialization.
Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/652306/
Link: https://lore.kernel.org/r/20250507230113.14270-4-alex.vinarskis@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Take into account LTTPR capabilities when selecting maximum allowed
link rate, number of data lines.
Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/652302/
Link: https://lore.kernel.org/r/20250507230113.14270-3-alex.vinarskis@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
For historical reasons a lot of symbols in the MSM DisplayPort driver
used the generic dp_ prefix. Perform a mass-rename of those symbols to
use msm_dp prefix.
Basically this is a result of the following script:
sed drivers/gpu/drm/msm/dp/* -i -e 's/\<dp_/msm_dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/"msm_dp_/"dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/msm_\(dp_sdp_header\|dp_sdp\)\>/\1/g'
Yes, this also results in renaming of several struct fields in addition
to renaming the structs and functions, but I think the simple solution
is better than the more complex one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410250305.UHKDhtxy-lkp@intel.com/
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622211/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-1-13c5c03fad44@linaro.org
|
|
Throughout the Qualcomm Displayport driver a number of defines and
struct members has become unused, but lingers in the code. Remove these.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/585345/
Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-3-a5aed9798d32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Both dp_link_adjust_levels() and dp_ctrl_update_vx_px() limit swing and
pre-emphasis to 2, while the real maximum value for the sum of the
voltage swing and pre-emphasis is 3. Fix the DP code to remove this
limitation.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/577006/
Link: https://lore.kernel.org/r/20240203-dp-swing-3-v1-1-6545e1706196@linaro.org
|
|
mdss_dp_test_bit_depth_to_bpc() can be replace by
mdss_dp_test_bit_depth_to_bpp() / 3. Hence remove it.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/574279/
Link: https://lore.kernel.org/r/1704993255-12753-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Bandwidth code was being used as test link rate. Fix this by converting
bandwidth code to test link rate
Do not reset voltage and pre-emphasis level during IRQ HPD attention
interrupt. Also fix pre-emphasis parsing during test link status process
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add the debugfs nodes needed for the video pattern
compliance tests to MSM DP driver.
Changes in v2: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add the needed displayPort files to enable DP driver
on msm target.
"dp_display" module is the main module that calls into
other sub-modules. "dp_drm" file represents the interface
between DRM framework and DP driver.
Changes in v12:
-- Add support of pm ops in display port driver
-- Clear bpp depth bits before writing to MISC register
-- Fix edid read
Previous Change log:
https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Co-developed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
