summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dp/dp_link.c
AgeCommit message (Collapse)Author
2025-03-25drm/display: dp: change drm_dp_dpcd_read_link_status() return valueDmitry Baryshkov
drm_dp_dpcd_read_link_status() follows the "return error code or number of bytes read" protocol, with the code returning less bytes than requested in case of some errors. However most of the drivers interpreted that as "return error code in case of any error". Switch drm_dp_dpcd_read_link_status() to drm_dp_dpcd_read_data() and make it follow that protocol too. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-2-e80ff89593df@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2024-10-31drm/msm/dp: prefix all symbols with msm_dp_Dmitry Baryshkov
For historical reasons a lot of symbols in the MSM DisplayPort driver used the generic dp_ prefix. Perform a mass-rename of those symbols to use msm_dp prefix. Basically this is a result of the following script: sed drivers/gpu/drm/msm/dp/* -i -e 's/\<dp_/msm_dp_/g' sed drivers/gpu/drm/msm/dp/* -i -e 's/"msm_dp_/"dp_/g' sed drivers/gpu/drm/msm/dp/* -i -e 's/msm_\(dp_sdp_header\|dp_sdp\)\>/\1/g' Yes, this also results in renaming of several struct fields in addition to renaming the structs and functions, but I think the simple solution is better than the more complex one. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410250305.UHKDhtxy-lkp@intel.com/ Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/622211/ Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-1-13c5c03fad44@linaro.org
2024-04-22drm/msm/dp: Remove unused defines and membersBjorn Andersson
Throughout the Qualcomm Displayport driver a number of defines and struct members has become unused, but lingers in the code. Remove these. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/585345/ Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-3-a5aed9798d32@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-08drm/msm/dp: allow voltage swing / pre emphasis of 3Dmitry Baryshkov
Both dp_link_adjust_levels() and dp_ctrl_update_vx_px() limit swing and pre-emphasis to 2, while the real maximum value for the sum of the voltage swing and pre-emphasis is 3. Fix the DP code to remove this limitation. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/577006/ Link: https://lore.kernel.org/r/20240203-dp-swing-3-v1-1-6545e1706196@linaro.org
2024-01-24drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA caseKuogee Hsieh
MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. dp_link_get_colorimetry_config() returns wrong colorimetry value in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation. Hence fix this problem by having dp_link_get_colorimetry_config() return defined CEA RGB colorimetry value in the case of DP_TEST_DYNAMIC_RANGE_CEA. Changes in V2: -- drop retrieving colorimetry from colorspace -- drop dr = link->dp_link.test_video.test_dyn_range assignment Changes in V3: -- move defined MISCr0a Colorimetry vale to dp_reg.h -- rewording commit title -- rewording commit text to more precise describe this patch Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/574888/ Link: https://lore.kernel.org/r/1705526010-597-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-01-24drm/msms/dp: fixed link clock divider bits be over written in BPC unknown caseKuogee Hsieh
Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the BPC unknown case, the additional shift causes spill over to the other bits of the [DP_CONFIGURATION_CTRL] register. Fix this by changing the return value of dp_link_get_test_bits_depth() in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT). Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/573989/ Link: https://lore.kernel.org/r/1704917931-30133-1-git-send-email-quic_khsieh@quicinc.com [quic_abhinavk@quicinc.com: fix minor checkpatch warning to align with opening braces] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-10-09drm/msm/dp: Inline dp_link_parse_sink_count()Stephen Boyd
The function dp_link_parse_sink_count() is really just drm_dp_read_sink_count(). It debug prints out the bit for content protection (DP_SINK_CP_READY), but that is not useful beyond debug because 'link->dp_link.sink_count' is overwritten to only contain the sink_count in this same function. Just use drm_dp_read_sink_count() in the one place this function is called to simplify. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554987/ Link: https://lore.kernel.org/r/20230829184735.2841739-7-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-09-20drm/msm/dp: Add newlines to debug printksStephen Boyd
These debug printks are missing newlines, causing drm debug logs to be hard to read. Add newlines so that the messages are on their own line. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging") Fixes: cd779808cccd ("drm/msm/dp: Add basic PSR support for eDP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/554533/ Link: https://lore.kernel.org/r/20230825230109.2264345-1-swboyd@chromium.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-04-06drm/msm/dp: Fix spelling mistake "Capabiity" -> "Capability"Colin Ian King
There is a spelling mistake in a drm_dbg_dp message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/526658/ Link: https://lore.kernel.org/r/20230314082050.26331-1-colin.i.king@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-03-13drm/msm/dp: Add basic PSR support for eDPVinod Polimera
Add support for basic panel self refresh (PSR) feature for eDP. Add a new interface to set PSR state in the sink from DPU. Program the eDP controller to issue PSR enter and exit SDP to the sink. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524734/ Link: https://lore.kernel.org/r/1677774797-31063-10-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dp: retry 3 times if set sink to D0 poweer state failedKuogee Hsieh
Bring sink out of D3 (power down) mode into D0 (normal operation) mode by setting DP_SET_POWER_D0 bit to DP_SET_POWER dpcd register. This patch will retry 3 times if written to DP_SET_POWER register failed. Changes in v5: -- split into two patches Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502536/ Link: https://lore.kernel.org/r/1662999830-13916-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dp: replace variable err with len at dp_aux_link_power_up()Kuogee Hsieh
drm_dp_dpcd_readb() will return 1 to indicate one byte had been read successfully. This patch replace variable "err" with "len" have more correct meaning. changes in v5: -- split into 3 patches Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/502533/ Link: https://lore.kernel.org/r/1662999830-13916-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-09-18drm/msm/dp: Silence inconsistent indent warningStephen Boyd
Build robots complain smatch warnings: drivers/gpu/drm/msm/dp/dp_link.c:969 dp_link_process_link_status_update() warn: inconsistent indenting Fix it along with a trailing space from the same commit. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Fixes: ea530388e64b ("drm/msm/dp: skip checking LINK_STATUS_UPDATED bit") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498954/ Link: https://lore.kernel.org/r/20220823212302.1744145-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-05-02drm/msm/dp: replace DRM_DEBUG_DP marco with drm_dbg_dpKuogee Hsieh
Since DRM_DEBUG_DP is deprecated in favor of drm_dbg_dp(NULL, ...), this patch replace all DRM_DEBUG_DP with drm_dbg_dp(). Changes in v4: -- replace (strucr drm_dev *)NULL with drm_dev Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474870/ Link: https://lore.kernel.org/r/1645122930-23863-4-git-send-email-quic_khsieh@quicinc.com [DB: fixed compilation of dp_bridge_detect() caused by previous patch] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2021-12-08drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failedKuogee Hsieh
Add checking aux read/write status at both dp_link_parse_sink_count() and dp_link_parse_sink_status_filed() to avoid long timeout delay if dp aux read/write failed at timeout due to cable unplugged. Changes in V4: -- split this patch as stand alone patch Changes in v5: -- rebase on msm-next branch Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1638985262-2072-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dp: add logs across DP driver for ease of debuggingMaitreyee Rao
Add trace points across the MSM DP driver to help debug interop issues. Changes in v2: - Got rid of redundant log messages. - Added %#x instead of 0x%x wherever required. - Got rid of __func__ calls in debug messages. - Added newline wherever missing. Changes in v3: - Got rid of redundant log messages. - Unstuck colon from printf specifier in various places. Changes in v4: - Changed goto statement and used if else-if Changes in v5: - Changed if else if statement, to not overwrite the ret variable multiple times. Changes in v6: - Changed a wrong log message. Signed-off-by: Maitreyee Rao <maitreye@codeaurora.org> Link: https://lore.kernel.org/r/1627346298-11528-1-git-send-email-maitreye@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm/dp/dp_link: Fix some potential doc-rotLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/dp/dp_link.c:374: warning: expecting prototype for dp_parse_video_pattern_params(). Prototype was for dp_link_parse_video_pattern_params() instead drivers/gpu/drm/msm/dp/dp_link.c:573: warning: expecting prototype for dp_parse_phy_test_params(). Prototype was for dp_link_parse_phy_test_params() instead drivers/gpu/drm/msm/dp/dp_link.c:975: warning: expecting prototype for dp_link_process_downstream_port_status_change(). Prototype was for dp_link_process_ds_port_status_change() instead Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210602143300.2330146-15-lee.jones@linaro.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: remove unneeded variable retBernard Zhao
This patch fix coccicheck warning: drivers/gpu/drm/msm/dp/dp_link.c:848:5-8: Unneeded variable: "ret". Return "0" on line 880 Also remove unneeded function return value check. Signed-off-by: Bernard Zhao <bernard@vivo.com> Link: https://lore.kernel.org/r/20210407130654.3387-1-bernard@vivo.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-10drm/msm/dp: skip checking LINK_STATUS_UPDATED bitKuogee Hsieh
Some dongle will not clear LINK_STATUS_UPDATED bit after DPCD read which cause link training failed. This patch just read 6 bytes of DPCD link status from sink and return without checking LINK_STATUS_UPDATED bit. Only 8 bits are used to represent link rate at sinker DPCD. The really link rate is 2.7Mb times the 8 bits value. For example, 0x0A at DPCD is equal to 2.7Gb (10 * 2.7Mb). This patch also convert 8 bits value of DPCD to really link rate to fix worng link rate error during phy compliance test. Fixes: 6625e2637d93 ("drm/msm/dp: DisplayPort PHY compliance tests fixup") Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dp: DisplayPort PHY compliance tests fixupTanmay Shah
Bandwidth code was being used as test link rate. Fix this by converting bandwidth code to test link rate Do not reset voltage and pre-emphasis level during IRQ HPD attention interrupt. Also fix pre-emphasis parsing during test link status process Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: Use qmp phy for DP PLL and PHYStephen Boyd
Make the necessary changes to the DP driver to use the qmp phy from the common phy framework instead of rolling our own in the drm subsystem. This also removes the PLL code and adds proper includes so things build. Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: remove mode hard-coding in case of DP CTSAbhinav Kumar
No need to fix the number of resolutions to one during the video pattern CTS test. The userspace test client will handle both the hotplug as well as picking the right resolution for the test. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: Add DP compliance tests on Snapdragon ChipsetsKuogee Hsieh
add event thread to execute events serially from event queue. Also timeout mode is supported which allow an event be deferred to be executed at later time. Both link and phy compliant tests had been done successfully. Changes in v2: -- Fix potential deadlock by removing redundant connect_mutex -- Check and enable link clock during modeset -- Drop unused code and fix function prototypes. -- set sink power to normal operation state (D0) before DPCD read Changes in v3: -- push idle pattern at main link before timing generator off -- add timeout handles for both connect and disconnect Changes in v4: -- add ST_SUSPEND_PENDING to handles suspend/modeset test operations -- clear dp phy aux interrupt status when ERR_DPPHY_AUX error -- send segment addr during edid read -- clear bpp depth before MISC register write Changes in v5: -- add ST_SUSPENDED to fix crash at resume Changes in v6: -- at msm_dp_display_enable() do not return until resume_done to avoid kms commit timeout Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add displayPort driver supportChandan Uddaraju
Add the needed displayPort files to enable DP driver on msm target. "dp_display" module is the main module that calls into other sub-modules. "dp_drm" file represents the interface between DRM framework and DP driver. Changes in v12: -- Add support of pm ops in display port driver -- Clear bpp depth bits before writing to MISC register -- Fix edid read Previous Change log: https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/ Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Co-developed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 20:47:44 +0000