| Age | Commit message (Collapse) | Author |
|---|
|
Add support for the DPI block found in the MT8195 and MT8188 SoCs.
Inside of the SoC, this block is directly connected to the HDMI IP.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-11-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
On some SoCs, like MT8195 and MT8188, the DPI's FIFO controller
(afifo) supports outputting either one or two pixels per round
regardless of the input being 1T1P or 1T2P.
Add a `output_1pixel` member to struct mtk_dpi_conf which, if
set, will enable outputting one pixel per clock.
In case the input is two pixel per clock (1T2P), the AFIFO HW
will automatically (and internally) convert it to 1T1P.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-9-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
This IP includes a Pattern Generator which is useful for debugging
and testing purposes: add the relevant register and bits to the
mtk_dpi_regs.h header, and implement support for it in mtk_dpi.
Adding this required to introduce a .debugfs_init() callback for
the DPI bridge, which creates a "dpi_test_pattern" file in the
directory of the appropriate connector.
The pattern generator can generate various internal patterns and
this submission includes support for:
- 256 or 1024 shades of gray in a Vertical or Horizontal Pattern
- Vertical Color Bars
- Frame border
- Dot Moire
This generator also supports filling the entire screen with one
custom color, but support for that is not included in this commit.
Enabling and disabling this generator can be done by sending a
string to the dpi_test_pattern debugfs file; the pattern is
expected to be formatted as follows:
<enable (1) or disable (0)> <pattern number>
where the pattern number can be a number from 0 to 7, excluding 5.
Of course 5 is excluded because that activates custom color fill
which, again, is not supported in this commit.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Dpintf is the displayport interface hardware unit. This unit is similar
to dpi and can reuse most of the code.
This patch adds support for mt8195-dpintf to this dpi driver. Main
differences are:
- 4 pixels for one iteration for dp_intf while dpi is 1 pixel for one
iteration.
- Input of dp_intf is two pixels per iteration.
- Some register contents differ slightly between the two components.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-6-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The input pixel per iteration could be different, so we add a new config
"input_2pixel" to control this.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-4-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Dp_intf supports YUV422 as output format. In MT8195 Chrome project,
YUV422 output format is used for 4K resolution.
To support this, it is also needed to support color format transfer.
Color format transfer is a new feature for both dpi and dpintf of MT8195.
The input format could be RGB888 and output format for dp_intf should be
YUV422. Therefore, we add a mtk_dpi_matrix_sel() helper to update the
DPI_MATRIX_SET register depending on the color format.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-2-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The default timing of DPI data and clock is not match.
We could adjust this bit to make them match.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
The address of register DPI_H_FRE_CON is different in different IC.
Using of_node data to find this address.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
Add DPI connector/encoder to support HDMI output via the
attached HDMI bridge.
Signed-off-by: Jie Qiu <jie.qiu@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
