summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2023-05-04drm/i915: Define bitmasks for ilk pfit window pos/sizeVille Syrjälä
Define and use the bitmasks for the x/y components of the ilk+ panel filter window pos/size registers. Note that we stick to the full 16 bit mask even though the actual hardware limits are lower (and somewhat platform dependent). BDW is actually limited to 13 bits horizontal and 12 bits vertical, with the high bits being hardwired to zero. HSW should have the same limits as BDW. And pre-HSW should be limited to 12bits in both directions as that's already the limit of the transcoder timing registers. Curiously on HSW and earlier platforms all 16 bits can actually be set, but presumably the hardware ignores the high bits. v2: Switch back to full 16bit masks since that's what we use transcoder timign regs and PIPESRC as well Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-05-04drm/i915/gsc: add support for GSC proxy interruptDaniele Ceraolo Spurio
The GSC notifies us of a proxy request via the HECI2 interrupt. The interrupt must be enabled both in the HECI layer and in our usual gt irq programming; for the latter, the interrupt is enabled via the same enable register as the GSC CS, but it does have its own mask register. When the interrupt is received, we also need to de-assert it in both layers. The handling of the proxy request is deferred to the same worker that we use for GSC load. New flags have been added to distinguish between the init case and the proxy interrupt. v2: Make sure not to set the reset bit when enabling/disabling the GSC interrupts, fix defines (Alan) v3: rebase on proxy status register check Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-5-daniele.ceraolospurio@intel.com
2023-05-04drm/i915/gsc: add initial support for GSC proxyDaniele Ceraolo Spurio
The GSC uC needs to communicate with the CSME to perform certain operations. Since the GSC can't perform this communication directly on platforms where it is integrated in GT, i915 needs to transfer the messages from GSC to CSME and back. The proxy flow is as follow: 1 - i915 submits a request to GSC asking for the message to CSME 2 - GSC replies with the proxy header + payload for CSME 3 - i915 sends the reply from GSC as-is to CSME via the mei proxy component 4 - CSME replies with the proxy header + payload for GSC 5 - i915 submits a request to GSC with the reply from CSME 6 - GSC replies either with a new header + payload (same as step 2, so we restart from there) or with an end message. After GSC load, i915 is expected to start the first proxy message chain, while all subsequent ones will be triggered by the GSC via interrupt. To communicate with the CSME, we use a dedicated mei component, which means that we need to wait for it to bind before we can initialize the proxies. This usually happens quite fast, but given that there is a chance that we'll have to wait a few seconds the GSC work has been moved to a dedicated WQ to not stall other processes. v2: fix code style, includes and variable naming (Alan) v3: add extra check for proxy status, fix includes and comments Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-4-daniele.ceraolospurio@intel.com
2023-05-04drm/i915/scatterlist: fix kernel-doc parameter documentationJani Nikula
drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops' drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put' drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get' drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0b31edbb33116c8002dd1e72d3ad25efe5dd0176.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/pxp: fix kernel-doc for member dev_linkJani Nikula
Add /** to make it a kernel-doc. drivers/gpu/drm/i915/pxp/intel_pxp_types.h:96: warning: Function parameter or member 'dev_link' not described in 'intel_pxp' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/84f89a3332fa323888f1e3241fb51ae10417ecd7.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/pmu: drop kernel-docJani Nikula
The comments are closer to not being kernel-doc. drivers/gpu/drm/i915/i915_pmu.h:21: warning: cannot understand function prototype: 'enum i915_pmu_tracked_events ' drivers/gpu/drm/i915/i915_pmu.h:32: warning: cannot understand function prototype: 'enum ' drivers/gpu/drm/i915/i915_pmu.h:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * How many different events we track in the global PMU mask. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7656b8f58b088c108a2a32f7089329740efabba1.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/active: fix kernel-doc for function parametersJani Nikula
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get' drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7f201c6cb715e4b3cece78ffa893a75610ecd27d.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/guc: add intel_guc_state_capture member docs for ads_null_cache and ↵Jani Nikula
max_mmio_per_node drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'ads_null_cache' not described in 'intel_guc_state_capture' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'max_mmio_per_node' not described in 'intel_guc_state_capture' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c83878163221ed3684a6de5d5e1c5373ddd5c06f.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/guc: drop lots of kernel-doc markersJani Nikula
The documentation is closer to not being kernel-doc, so just drop the kernel-doc markers. drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'size' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'data' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'rd' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'wr' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'link' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'is_partial' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_class' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_inst' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'guc_id' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'lrca' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'reginfo' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:62: warning: wrong kernel-doc identifier on line: * struct guc_debug_capture_list_header / struct guc_debug_capture_list drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:80: warning: wrong kernel-doc identifier on line: * struct __guc_mmio_reg_descr / struct __guc_mmio_reg_descr_group drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:105: warning: wrong kernel-doc identifier on line: * struct guc_state_capture_header_t / struct guc_state_capture_t / drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'is_valid' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'ptr' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'size' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'status' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'marker' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'read_ptr' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'write_ptr' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'size' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'sampled_write_ptr' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'wrap_offset' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flush_to_file' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'buffer_full_cnt' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'reserved' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flags' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'version' not described in 'guc_log_buffer_state' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c210d53fdbd6da5fac42e435855d269504919d7.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/guc: add dbgfs_node member kernel-docJani Nikula
drivers/gpu/drm/i915/gt/uc/intel_guc.h:274: warning: Function parameter or member 'dbgfs_node' not described in 'intel_guc' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0f681dd82289dd86da78c6242411e8d812e51a1.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/engine: hide preempt_hang selftest member from kernel-docJani Nikula
drivers/gpu/drm/i915/gt/intel_engine_types.h:293: warning: Function parameter or member 'preempt_hang' not described in 'intel_engine_execlists' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dafd771bb75cf14965dd3b666987c58a438de134.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/gtt: fix i915_vm_resv_put() kernel-doc parameter nameJani Nikula
drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Function parameter or member 'vm' not described in 'i915_vm_resv_put' drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Excess function parameter 'resv' description in 'i915_vm_resv_put' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c22e58e770019667980b3617f6e963b76d7e79a7.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/context: fix kernel-doc parameter descriptionsJani Nikula
drivers/gpu/drm/i915/gt/intel_context.h:108: warning: Function parameter or member 'ce' not described in 'intel_context_lock_pinned' drivers/gpu/drm/i915/gt/intel_context.h:123: warning: Function parameter or member 'ce' not described in 'intel_context_is_pinned' drivers/gpu/drm/i915/gt/intel_context.h:142: warning: Function parameter or member 'ce' not described in 'intel_context_unlock_pinned' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8359a1cef6b5ab268a9dcc1a382281b6e39cfa64.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/engine: fix kernel-doc function name for intel_engine_cleanup_common()Jani Nikula
drivers/gpu/drm/i915/gt/intel_engine_cs.c:1525: warning: expecting prototype for intel_engines_cleanup_common(). Prototype was for intel_engine_cleanup_common() instead Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/33f8dfdf38be3e16675971e6983e3e300d4301a6.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/gem: fix i915_gem_object_lookup_rcu() kernel-doc parameter nameJani Nikula
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Function parameter or member 'file' not described in 'i915_gem_object_lookup_rcu' drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Excess function parameter 'filp' description in 'i915_gem_object_lookup_rcu' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/80c96863b7a0755aaa07efb49bcccd9ba620c6d7.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/request: drop kernel-docJani Nikula
The documentation is closer to not being kernel-doc. Just drop the kernel-doc /** indicators. drivers/gpu/drm/i915/i915_request.h:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Request queue structure. drivers/gpu/drm/i915/i915_request.h:477: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Returns true if seq1 is later than seq2. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/62a7a0f6e5b33e59ef4339304d01e7ef7ee04430.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/error: fix i915_capture_error_state() kernel-docJani Nikula
drivers/gpu/drm/i915/i915_gpu_error.c:2174: warning: Function parameter or member 'dump_flags' not described in 'i915_capture_error_state' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20524292b002800975d82d23b5bd47da878f1733.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/perf: fix i915_perf_ioctl_version() kernel-docJani Nikula
drivers/gpu/drm/i915/i915_perf.c:5307: warning: Function parameter or member 'i915' not described in 'i915_perf_ioctl_version' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b93ddb95a15d1376936349b32c7facb35c76be82.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/vma: document struct i915_vma_resource wakeref memberJani Nikula
drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'wakeref' not described in 'i915_vma_resource' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/50389365e095dc564ab5f1f1e3647934163ffefa.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/utils: drop kernel-doc from __wait_for()Jani Nikula
The parameters aren't documented, and the file isn't included in Sphinx build anyway, so demote the kernel-doc to a regular comment. drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'OP' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'COND' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'US' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmin' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmax' not described in '__wait_for' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e6e33a7f03c4a78739fa96e6ae74eb272ae147e7.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/vma: fix kernel-doc function name for i915_vma_size()Jani Nikula
drivers/gpu/drm/i915/i915_vma.h:145: warning: expecting prototype for i915_vma_offset(). Prototype was for i915_vma_size() instead Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9fd58398ba6f86c55cc7a7c62efeab70c3311d59.1683041799.git.jani.nikula@intel.com
2023-05-04drm/i915/gvt: fix intel_vgpu_alloc_resource() kernel-doc parameterJani Nikula
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Function parameter or member 'conf' not described in 'intel_vgpu_alloc_resource' drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Excess function parameter 'param' description in 'intel_vgpu_alloc_resource' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9213214c9caa296ebd349a5d5b44c2bbb45cdf99.1683041799.git.jani.nikula@intel.com
2023-05-03drm/i915/guc: Fix error capture for virtual enginesJohn Harrison
GuC based register dumps in error capture logs were basically broken for virtual engines. This can be seen in igt@gem_exec_balancer@hang: [IGT] gem_exec_balancer: starting subtest hang [drm] GPU HANG: ecode 12:4:e1524110, in gem_exec_balanc [6388] [drm] GT0: GUC: No register capture node found for 0x1005 / 0xFEDC311D [drm] GPU HANG: ecode 12:4:00000000, in gem_exec_balanc [6388] [IGT] gem_exec_balancer: exiting, ret=0 The test causes a hang on both engines of a virtual engine context. The engine instance zero hang gets a valid error capture but the non-instance-zero hang does not. Fix that by scanning through the list of pending register captures when a hang notification for a virtual engine is received. That way, the hang can be assigned to the correct physical engine prior to starting the error capture process. So later on, when the error capture handler tries to find the engine register list, it looks for one on the correct engine. Also, sneak in a missing blank line before a comment in the node search code. v2: Fix null pointer deref on non-GuC platforms. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-5-John.C.Harrison@Intel.com
2023-05-03drm/i915/guc: Capture list naming clean upJohn Harrison
Don't use 'xe_lp*' prefixes for register lists that are common with Gen8. Don't add Xe only GSC registers to pre-Xe devices that don't even have a GSC engine. Fix Xe_LP name. Don't use GEN9 as a prefix for register lists that contain all GEN8 registers. Rename the 'default_' register list prefix to 'gen8_' as that is the more accurate name. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-4-John.C.Harrison@Intel.com
2023-05-03drm/i915/guc: Consolidate duplicated capture list codeJohn Harrison
Remove 99% duplicated steered register list code. Also, include the pre-Xe steered registers in the pre-Xe list generation. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-3-John.C.Harrison@Intel.com
2023-05-03drm/i915/guc: Don't capture Gen8 regs on Xe devicesJohn Harrison
A pair of pre-Xe registers were being included in the Xe capture list. GuC was rejecting those as being invalid and logging errors about them. So, stop doing it. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Fixes: dce2bd542337 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.") Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-2-John.C.Harrison@Intel.com
2023-05-03drm/i915/selftests: Use gt_err for GT infoTejas Upadhyay
It will be more informative regarding GT if we use gt_err instead. Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428125952.4037964-3-tejas.upadhyay@intel.com
2023-05-03drm/i915/gt: Use gt_err for GT infoTejas Upadhyay
It will be more informative regarding GT if we use gt_err instead. Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428125952.4037964-2-tejas.upadhyay@intel.com
2023-05-03drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()Hans de Goede
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode. This is based on the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries. Checking the Windows driver shows that it does always honor the VBT delays independent of the version of the VBT sequences. Commit 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence") switched to a direct msleep() instead of intel_dsi_msleep() when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix the panel on an Acer Aspire Switch 10 E SW3-016 not turning on. And now testing on a Nextbook Ares 8A shows that panel_on_delay must always be honored otherwise the panel will not turn on. Instead of only always using regular msleep() for panel_on_delay do as Windows does and always use regular msleep() everywhere were intel_dsi_msleep() is used and drop the intel_dsi_msleep() helper. Changes in v2: - Replace all intel_dsi_msleep() calls instead of just the intel_dsi_msleep(panel_on_delay) call Cc: stable@vger.kernel.org Fixes: 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com (cherry picked from commit fa83c12132f71302f7d4b02758dc0d46048d3f5f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-05-03drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_infoRadhakrishna Sripada
CPU transcoder mask is used to iterate over the available CPU transcoders in the macro for_each_cpu_transcoder(). The macro is broken on MTL and got highlighted when audio state was being tracked for each transcoder added in [1]. Add the missing CPU transcoder mask which is similar to ADL-P mask but without DSI transcoders. [1]: https://patchwork.freedesktop.org/patch/523723/ Fixes: 7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Acked-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420221248.2511314-1-radhakrishna.sripada@intel.com (cherry picked from commit bddc18913bd44adae5c828fd514d570f43ba1576) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-05-03drm/i915/guc: Actually return an error if GuC version range check failsJohn Harrison
Dan Carpenter pointed out that 'err' was not being set in the case where the GuC firmware version range check fails. Fix that. Note that while this is a bug fix for a previous patch (see Fixes tag below). It is an exceedingly low risk bug. The range check is asserting that the GuC firmware version is within spec. So it should not be possible to ever have a firmware file that fails this check. If larger version numbers are required in the future, that would be a backwards breaking spec change and thus require a major version bump, in which case an old i915 driver would not load that new version anyway. Fixes: 9bbba0667f37 ("drm/i915/guc: Use GuC submission API version number") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230421224742.2357198-1-John.C.Harrison@Intel.com (cherry picked from commit 80ab31799002166ac7c660bacfbff4f85bc29107) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-05-02drm/i915/fdinfo: Enable fdinfo for GuC backendsUmesh Nerlige Ramappa
Enable fdinfo for GuC based platforms with the exception that long running contexts will not provide reliable busyness data unless they switch out at some reasonable point in time. Link: https://gitlab.freedesktop.org/drm/intel/issues/8303 Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427224705.2785566-3-umesh.nerlige.ramappa@intel.com
2023-05-02i915/pmu: Add support for total context runtime for GuC back-endUmesh Nerlige Ramappa
GPU accumulates the context runtime in a 32 bit counter - CTX_TIMESTAMP in the context image. This value is saved/restored on context switches. KMD accumulates these values into a 64 bit counter taking care of any overflows as needed. This count provides the basis for client specific busyness in the fdinfo interface. KMD accumulation happens just before the context is unpinned and when context switches out. This works for execlist back-end since execlist scheduling has visibility into context switches. With GuC mode, KMD does not have visibility into context switches and this counter is accumulated only when context is unpinned. Context is unpinned once the context scheduling is successfully disabled. Disabling context scheduling is an asynchronous operation. Also if a context is servicing frequent requests, scheduling may never be disabled on it. For GuC mode, since updates to the context runtime may be delayed, add hooks to update the context runtime in a worker thread as well as when a user queries for it. Limitation: - If a context is never switched out or runs for a long period of time, the runtime value of CTX_TIMESTAMP may never be updated, so the counter value may be unreliable. This patch does not support such cases. Such support must be available from the GuC FW and it is WIP. This patch is an extract from previous work authored by John/Umesh here - https://patchwork.freedesktop.org/patch/496441/?series=105085&rev=4 v2: (Ashutosh) - Drop COPS_RUNTIME_ACTIVE_TOTAL - s/guc_context_update_clks/__guc_context_update_stats - Pin context before accessing in guc_timestamp_ping - In guc_context_unpin, use spinlock to serialize access to runtime stats Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Co-developed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427224705.2785566-2-umesh.nerlige.ramappa@intel.com
2023-05-02drm/i915/display/dp: 128/132b LT requirementArun R Murthy
For 128b/132b LT prior to LT DPTX should set power state, DP channel coding and then link rate. v2: added separate function to avoid code duplication(Jani N) v3: DP2.1 section 3.5.2.16 is ordered, 3.5.1.2 is unordered and hence discarding <Ville> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230425025944.151744-1-arun.r.murthy@intel.com
2023-05-02drm/i915/rc6: throw out set() wrapperJani Nikula
Remove useless indirection that's just misdirection for the readers. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230421135948.2029121-1-jani.nikula@intel.com
2023-04-28drm/i915/mtl: Enable TC portsMika Kahola
Finally, we can enable TC ports for Meteorlake. Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-14-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Pin assignment for TypeCAnusha Srivatsa
Unlike previous platforms that used PORT_TX_DFLEXDPSP for max_lane calculation, MTL uses only PORT_TX_DFLEXPA1 from which the max_lanes has to be calculated. Bspec: 50235, 65380 Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-13-mika.kahola@intel.com
2023-04-28drm/i915/mtl: TypeC HPD live status queryImre Deak
The HPD live status for MTL has to be read from different set of registers. MTL deserves a new function for this purpose and cannot reuse the existing HPD live status detection Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-12-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Power up TCSSMika Kahola
Add register writes to enable powering up Type-C subsystem i.e. TCSS. For MeteorLake we need to request TCSS to power up and check the TCSS power state after 500 us. In addition, for PICA we need to set/clear the Type-C PHY ownnership bit when Type-C device is connected/disconnected. Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-11-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Define mask for DDI AUX interruptsGustavo Sousa
Xe_LPD+ defines interrupt bits for only DDI ports in the DE Port Interrupt registers. The bits for Type-C ports are defined in the PICA interrupt registers. BSpec: 50064 Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-10-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Readout Thunderbolt HW stateMika Kahola
Readout hw state for Thunderbolt. Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-9-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Enabling/disabling sequence Thunderbolt pllMika Kahola
Enabling and disabling sequence for Thunderbolt PLL. Bspec: 64568 v2: Use intel_de_wait_for_register() (RK) Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-8-mika.kahola@intel.com
2023-04-28drm/i915/mtl: For DP2.0 10G and 20G rates use MPLLAMika Kahola
Use MPLLA for DP2.0 rates 10G and 20G, when ssc is enabled. v2: Fix typo in commit message (Animesh) Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-7-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Add voltage swing sequence for C20Mika Kahola
DP1.4 and DP20 voltage swing sequence for C20 phy. Bspec: 65449, 67636, 67610 Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-6-mika.kahola@intel.com
2023-04-28drm/i915/mtl: C20 port clock calculationMika Kahola
Calculate port clock with C20 phy. BSpec: 64568 Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-5-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Dump C20 pll hw stateMika Kahola
As we already do with C10 chip, let's dump the pll hw state for C20 as well. Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-4-mika.kahola@intel.com
2023-04-28drm/i915/mtl: C20 HW readoutMika Kahola
Create a table for C20 DP1.4, DP2.0 and HDMI2.1 rates. The PLL settings are based on table, not for algorithmic alternative. For DP 1.4 only MPLLB is in use. Once register settings are done, we read back C20 HW state. BSpec: 64568 v2: Updated pll tables (RK) MPLLB selection fix (RK) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-3-mika.kahola@intel.com
2023-04-28drm/i915/mtl: C20 PLL programmingMika Kahola
C20 phy PLL programming sequence for DP, DP2.0, HDMI2.x non-FRL and HDMI2.x FRL. This enables C20 MPLLA and MPLLB programming sequence. add 4 lane support for c20. v2: Add 6.48Gbps and 6.75Gbps modes for eDP (RK) Fix lane check (RK) Fix multiline commenting (Arun) use usleep_range() instead of msleep() (Andi) Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-2-mika.kahola@intel.com
2023-04-28drm/i915/selftest: Update the SLPC selftestVinay Belgaumkar
Use the new efficient frequency toggling interface. Also create a helper function to restore the frequencies after the test is done. v2: Restore max freq first and then min. Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-2-vinay.belgaumkar@intel.com
2023-04-28drm/i915/guc/slpc: Provide sysfs for efficient freqVinay Belgaumkar
SLPC enables use of efficient freq at init by default. It is possible for GuC to request frequencies that are higher than the 'software' max if user has set it lower than the efficient level. Scenarios/tests that require strict fixing of freq below the efficient level will need to disable it through this interface. v2: Keep just one interface to toggle sysfs. With this, user will be completely responsible for toggling efficient frequency if need be. There will be no implicit disabling when user sets min < RP1 (Ashutosh) v3: Remove unused label, review comments (Ashutosh) v4: Toggle efficient freq usage in SLPC selftest and checkpatch fixes v5: Review comments (Andi) and add a separate patch for selftest updates Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency") Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-1-vinay.belgaumkar@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:54:17 +0000