summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/hisilicon/hibmc
AgeCommit message (Collapse)Author
2025-06-04Merge tag 'pci-v6.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Print the actual delay time in pci_bridge_wait_for_secondary_bus() instead of assuming it was 1000ms (Wilfred Mallawa) - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices', which broke resume from system sleep on AMD platforms and has been fixed by other commits (Lukas Wunner) Resource management: - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and unnecessary (Philipp Stanner) - Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and related flags since all uses have been removed (Philipp Stanner) - Rework devres 'request' functions so they are no longer 'hybrid', i.e., their behavior no longer depends on whether pcim_enable_device or pci_enable_device() was used, and remove related code (Philipp Stanner) - Warn (not BUG()) about failure to assign optional resources (Ilpo Järvinen) Error handling: - Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL or ERR_NONFATAL was received from a downstream device) and decode into bus/device/function (Bjorn Helgaas) - Determine AER log level once and save it so all related messages use the same level (Karolina Stolarek) - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors (Karolina Stolarek) - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs controls on interval and burst count, to avoid flooding logs and RCU stall warnings (Jon Pan-Doh) Power management: - Increment PM usage counter when probing reset methods so we don't try to read config space of a powered-off device (Alex Williamson) - Set all devices to D0 during enumeration to ensure ACPI opregion is connected via _REG (Mario Limonciello) Power control: - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the filename paths. Retain old deprecated symbols for compatibility, except for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold) - When unregistering pwrctrl, cancel outstanding rescan work before cleaning up data structures to avoid use-after-free issues (Brian Norris) Bandwidth control: - Simplify link bandwidth controller by replacing the count of Link Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag (Ilpo Järvinen) - Update the Link Speed after retraining, since the Link Speed may have changed (Ilpo Järvinen) PCIe native device hotplug: - Ignore Presence Detect Changed caused by DPC. pciehp already ignores Link Down/Up events caused by DPC, but on slots using in-band presence detect, DPC causes a spurious Presence Detect Changed event (Lukas Wunner) - Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports using in-band presence detect, the reset causes a Presence Detect Changed event, which mistakenly caused teardown and re-enumeration of the device. Drivers may need to annotate code that resets their device (Lukas Wunner) Virtualization: - Add an ACS quirk for Loongson Root Ports that don't advertise ACS but don't allow peer-to-peer transactions between Root Ports; the quirk allows each Root Port to be in a separate IOMMU group (Huacai Chen) Endpoint framework: - For fixed-size BARs, retain both the actual size and the possibly larger size allocated to accommodate iATU alignment requirements (Jerome Brunet) - Simplify ctrl/SPAD space allocation and avoid allocating more space than needed (Jerome Brunet) - Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint controllers (Niklas Cassel) - Align the return value (number of interrupts) encoding for pci_epc_get_msi()/pci_epc_ops::get_msi() and pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel) - Align the nr_irqs parameter encoding for pci_epc_set_msi()/pci_epc_ops::set_msi() and pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel) Common host controller library: - Convert pci-host-common to a library so platforms that don't need native host controller drivers don't need to include these helper functions (Manivannan Sadhasivam) Apple PCIe controller driver: - Extract ECAM bridge creation helper from pci_host_common_probe() to separate driver-specific things like MSI from PCI things (Marc Zyngier) - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying capabilities (Marc Zyngier) - Skip ports disabled in DT when setting up ports (Janne Grunau) - Add t6020 compatible string (Alyssa Rosenzweig) - Add T602x PCIe support (Hector Martin) - Directly set/clear INTx mask bits because T602x dropped the accessors that could do this without locking (Marc Zyngier) - Move port PHY registers to their own reg items to accommodate T602x, which moves them around; retain default offsets for existing DTs that lack phy%d entries with the reg offsets (Hector Martin) - Stop polling for core refclk, which doesn't work on T602x and the bootloader has already done anyway (Hector Martin) - Use gpiod_set_value_cansleep() when asserting PERST# in probe because we're allowed to sleep there (Hector Martin) Cadence PCIe controller driver: - Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans Zhang) - Make the cadence core buildable as a module (Kishon Vijay Abraham I) - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by loadable drivers when they are removed (Siddharth Vadapalli) Freescale i.MX6 PCIe controller driver: - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard Zhu) - Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link(); since the DWC core does this, imx6 only needs it when retraining for a faster link speed (Richard Zhu) - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu) - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some cases, the controller can't exit 'L23 Ready' through Beacon or PERST# deassertion (Richard Zhu) - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum: controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s, causing timeouts in L1 (Richard Zhu) - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu) - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu) Mobiveil PCIe controller driver: - Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans Zhang) NVIDIA Tegra194 PCIe controller driver: - Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM is enabled, since there are no other entries (Hans Zhang) Qualcomm PCIe controller driver: - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) Renesas R-Car PCIe controller driver: - Describe endpoint BAR 4 as being fixed size (Jerome Brunet) - Document how to obtain R-Car V4H (r8a779g0) controller firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert() deasserts in reverse order, to fix a link training regression (Jensen Huang) - Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel) Rockchip DesignWare PCIe controller driver: - Check only PCIE_LINKUP, not LTSSM status, to determine whether the link is up (Shawn Lin) - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root Complex and Endpoint modes (Shawn Lin) - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets non-sticky registers (Shawn Lin) - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit() (Diederik de Haas) Synopsys DesignWare PCIe controller driver: - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more robust; this will not affect the intended link width if all lanes are functional (Wenbin Yao) - Return bool (not int) for link-up check in dw_pcie_ops.link_up() and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti (Hans Zhang) - Add debugfs support for exposing DWC device-specific PTM context (Manivannan Sadhasivam) TI J721E PCIe driver: - Make j721e buildable as a loadable and removable module (Siddharth Vadapalli) - Fix j721e host/endpoint dependencies that result in link failures in some configs (Arnd Bergmann) Device tree bindings: - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) Miscellaneous: - Drop 'pci' suffix from intel_mid_pci.c filename to match similar files (Andy Shevchenko) - All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU to simplify build testing and avoid inadvertent build regressions (Arnd Bergmann) - Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof Wilczyński) - Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan Sadhasivam)" * tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits) MAINTAINERS: Update Manivannan Sadhasivam email address PCI: j721e: Fix host/endpoint dependencies PCI: j721e: Add support to build as a loadable module PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup PCI: cadence: Add support to build pcie-cadence library as a kernel module MAINTAINERS: Update Krzysztof Wilczyński email address PCI: Remove unnecessary linesplit in __pci_setup_bridge() PCI: WARN (not BUG()) when we fail to assign optional resources PCI: Remove unused pci_printk() PCI: qcom: Replace PERST# sleep time with proper macro PCI: dw-rockchip: Replace PERST# sleep time with proper macro PCI: host-common: Convert to library for host controller drivers PCI/ERR: Remove misleading TODO regarding kernel panic PCI: cadence: Remove duplicate message code definitions PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding PCI: cadence-ep: Correct PBA offset in .set_msix() callback ...
2025-04-23PCI: Add CONFIG_MMU dependencyArnd Bergmann
It turns out that there are no platforms that have PCI but don't have an MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing kernels for those platforms a lot, and avoids a lot of inadvertent build regressions. Add a dependency for CONFIG_PCI and remove all the ones for PCI specific device drivers that are currently marked not having it. There are a few platforms that have an optional MMU, but they usually cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is mainly for historic reasons, and anyone using those chips should really use the MMU these days. Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
2025-04-11drm/hisilicon/hibmc: Add vga connector detect functionsBaihan Li
Because the connected VGA connector would make driver can't get the userspace call, adding detect_ctx in vga connector to make HPD active userspace. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-10-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add MSI irq getting and requesting for HPDBaihan Li
To realize HPD feature, request irq for HPD , add its handler function. We use pci_alloc_irq_vectors() to get our msi irq, because we have two interrupts now. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-9-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Enable this hot plug detect of irq featureBaihan Li
Add HPD interrupt enable functions in drm framework, and also add detect_ctx functions. Because of the debouncing when HPD pulled out, add 200 ms delay in detect. Add link reset process to reset link status when a new connector pulgged in. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-8-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add colorbar-cfg feature and its debugfs fileBaihan Li
DP controller can support generating a color bar signal over the DisplayPort interface. This can be useful to check for possible DDR or GPU problems, as the signal generator resides completely in the DP block. Add debugfs file that controls colorbar generator. echo: config the color bar register to display cat: print the color bar configuration Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-7-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Getting connector info and EDID by using AUX channelBaihan Li
Add registering drm_aux and use it to get connector edid with drm functions. Add ddc channel in connector initialization to put drm_aux in drm_connector. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-6-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Refactor the member of drm_aux in struct hibmc_dpBaihan Li
Because the drm_aux of struct hibmc_dp_dev's member is not easy to get in hibmc_drm_dp.c, move the drm_aux to struct hibmc_dp. Then there are some adaptations and modifications to make this patch compile. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-5-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add dp serdes cfg in dp processBaihan Li
Add dp serdes cfg in link training process, and related adapting and modificating. Change some init values about training, because we want completely to negotiation process, so we start with the maximum rate and the electrical characteristic level is 0. Because serdes default cfgs is changed and used in hibmc_kms_init(), we changed the if-statement to check whether the value is 0. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-4-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add dp serdes cfg to adjust serdes rate, voltage and ↵Baihan Li
pre-emphasis This dp controller need features of digital-to-analog conversion and high-speed transmission in chip by its extern serdes controller. Our serdes cfg is relatively simple, just need two register configurations. Don't need too much functions, like: power on/off, initialize, and some complex configurations, so I'm not going to use the phy framework. This serdes is inited and configured in dp initialization, and also integrating them into link training process. For rate changing, we can change from 1.62-8.2Gpbs by cfg reg. For voltage and pre-emphasis levels changing, we can cfg different serdes ffe value. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-3-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Restructuring the header dp_reg.hBaihan Li
Move the macros below their corresponding registers to make them more obvious. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-2-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-03-25drm/display: dp: change drm_dp_dpcd_read_link_status() return valueDmitry Baryshkov
drm_dp_dpcd_read_link_status() follows the "return error code or number of bytes read" protocol, with the code returning less bytes than requested in case of some errors. However most of the drivers interpreted that as "return error code in case of any error". Switch drm_dp_dpcd_read_link_status() to drm_dp_dpcd_read_data() and make it follow that protocol too. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-2-e80ff89593df@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-02-09drm/hisilicon/hibmc: select CONFIG_DRM_DISPLAY_DP_HELPERArnd Bergmann
Without the DP helper code, the newly added displayport support causes a link failure: x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.o: in function `hibmc_dp_aux_init': dp_aux.c:(.text+0x37e): undefined reference to `drm_dp_aux_init' x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_set_pattern': dp_link.c:(.text+0xae): undefined reference to `drm_dp_dpcd_write' x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_get_adjust_train': dp_link.c:(.text+0x121): undefined reference to `drm_dp_get_adjust_request_voltage' x86_64-linux-ld: dp_link.c:(.text+0x12e): undefined reference to `drm_dp_get_adjust_request_pre_emphasis' x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_training': dp_link.c:(.text+0x2b0): undefined reference to `drm_dp_dpcd_write' x86_64-linux-ld: dp_link.c:(.text+0x2e3): undefined reference to `drm_dp_dpcd_write' Add both DRM_DISPLAY_DP_HELPER and DRM_DISPLAY_HELPER, which is in turn required by the former. Fixes: 0ab6ea261c1f ("drm/hisilicon/hibmc: add dp module in hibmc") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250127071059.617567-1-arnd@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: add dp module in hibmcBaihan Li
To support DP interface displaying in hibmc driver. Add a encoder and connector for DP modual. The HPD function and get_edid function will be add in next series, so temporarily using 1024x768 as default in hibmc_dp_connector_get_modes() Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-6-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: refactored struct hibmc_drm_privateBaihan Li
Refactored struct hibmc_drm_private to separate VGA module from generic struct. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-5-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: add dp hw moduel in hibmc driverBaihan Li
Build a dp level that hibmc driver can enable dp by calling their functions. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-4-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: add dp link moduel in hibmc driversBaihan Li
Add link training process functions in this moduel. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-3-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: add dp aux in hibmc driversBaihan Li
Add dp aux read/write functions. They are basic functions and will be used later. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-2-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-05drm: remove driver date from struct drm_driver and all driversJani Nikula
We stopped using the driver initialized date in commit 7fb8af6798e8 ("drm: deprecate driver date") and (eventually) started returning "0" for drm_version ioctl instead. Finish the job, and remove the unused date member from struct drm_driver, its initialization from drivers, along with the common DRIVER_DATE macros. v2: Also update drivers/accel (kernel test robot) Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-11-29drm/hibmc: Drop dependency on ARM64Thomas Zimmermann
There exists x86-based hardware with HiSilicon BMC chipsets. This driver works well on these systems. Drop the dependency on ARM64. Tested on RH1288 V3. v2: - s/Aarch86/ARM64 (Sui) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20241127133732.470414-1-tzimmermann@suse.de
2024-11-15drm/client: Move public client header to clients/ subdirectoryThomas Zimmermann
Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
2024-10-14drm/hisilicon/hibmc: Use video aperture helpersThomas Zimmermann
DRM's aperture functions have long been implemented as helpers under drivers/video/ for use with fbdev. Avoid the DRM wrappers by calling the video functions directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: John Stultz <jstultz@google.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930130921.689876-6-tzimmermann@suse.de
2024-09-26drm/hisilicon/hibmc: Run DRM default client setupThomas Zimmermann
Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. The hibmc driver specifies a preferred color mode of 32. As this is the default if no format has been given, leave it out entirely. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: John Stultz <jstultz@google.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-67-tzimmermann@suse.de
2024-08-13drm/hisilicon: Remove unused delarationsZhang Zekun
hibmc_mm_init() has been removed since commit 28645ae064d1 ("drm/hisilicon/hibmc: Remove hibmc_ttm.c"), but remain the declaration untouched in the header files. So, let's remove this unused declaration. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240812123543.64300-1-zhangzekun11@huawei.com
2024-05-27drm/hisilicon/hibmc: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/386e3a64efbdd61c3eaed3f49ea9c3ebd4fcd41d.1715691257.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-02drm/fbdev-generic: Convert to fbdev-ttmThomas Zimmermann
Only TTM-based drivers use fbdev-generic. Rename it to fbdev-ttm and change the symbol infix from _generic_ to _ttm_. Link the source file into TTM helpers, so that it is only build if TTM-based drivers have been selected. Select DRM_TTM_HELPER for loongson. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-43-tzimmermann@suse.de
2024-01-29Merge drm/drm-next into drm-misc-nextMaxime Ripard
Kickstart 6.9 development cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-01-18drm: remove I2C_CLASS_DDC supportHeiner Kallweit
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC. Class-based device auto-detection is a legacy mechanism and shouldn't be used in new code. So we can remove this class completely now. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-10drm/hisilicon: include drm/drm_edid.h only where neededJani Nikula
Reduce the need for rebuilds when drm_edid.h is modified by including it only where needed. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: John Stultz <jstultz@google.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240104201632.1100753-2-jani.nikula@intel.com
2023-09-21drm: Call drm_atomic_helper_shutdown() at shutdown time for misc driversDouglas Anderson
Based on grepping through the source code these drivers appear to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart comes straight out of the kernel doc "driver instance overview" in drm_drv.c. All of the drivers in this patch were fairly straightforward to fix since they already had a call to drm_atomic_helper_shutdown() at remove/unbind time but were just lacking one at system shutdown. The only hitch is that some of these drivers use the component model to register/unregister their DRM devices. The shutdown callback is part of the original device. The typical solution here, based on how other DRM drivers do this, is to keep track of whether the device is bound based on drvdata. In most cases the drvdata is the drm_device, so we can just make sure it is NULL when the device is not bound. In some drivers, this required minor code changes. To make things simpler, drm_atomic_helper_shutdown() has been modified to consider a NULL drm_device as a noop in the patch ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"). Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid
2023-06-19drm: Remove struct drm_driver.gem_prime_mmapThomas Zimmermann
All drivers initialize this field with drm_gem_prime_mmap(). Call the function directly and remove the field. Simplifies the code and resolves a long-standing TODO item. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-3-tzimmermann@suse.de
2023-01-10drm: Only select I2C_ALGOBIT for drivers that actually need itUwe Kleine-König
While working on a drm driver that doesn't need the i2c algobit stuff I noticed that DRM selects this code even though only 8 drivers actually use it. While also only some drivers use i2c, keep the select for I2C for the next cleanup patch. Still prepare this already by also selecting I2C for the individual drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
2022-11-24drm/hisilicon/hibmc: Fix preferred depth and bppThomas Zimmermann
Set the preferred color depth to 24 bits and the fbdev bpp to 32 bits. This will signal XRGB8888 as default format to clients. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-2-tzimmermann@suse.de
2022-11-08drm/hisilicon/hibmc: Include <linux/io.h> for readl() and writel()Thomas Zimmermann
Include <linux/io.h> to get readl() and writel() on S390. The error message is shown below and a bug report is at [1]. drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c:75:15: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration] 75 | reg = readl(priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE); | ^~~~~ drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c:80:9: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration] 80 | writel(reg, priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE); | ^~~~~~ Reported-by: kernel test robot <lkp@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 45b64fd9f7ae ("drm/fb-helper: Remove unnecessary include statements") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Link: https://lore.kernel.org/dri-devel/202211060608.qrTg8b2E-lkp@intel.com/T/#u # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-3-tzimmermann@suse.de
2022-11-05drm/fb-helper: Remove unnecessary include statementsThomas Zimmermann
Remove include statements for <drm/drm_fb_helper.h> where it is not required (i.e., most of them). In a few places include other header files that are required by the source code. v3: * fix amdgpu include statements * fix rockchip include statements Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de
2022-11-05drm/fb-helper: Move generic fbdev emulation into separate source fileThomas Zimmermann
Move the generic fbdev implementation into its own source and header file. Adapt drivers. No functional changes, but some of the internal helpers have been renamed to fit into the drm_fbdev_ naming scheme. v3: * rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h} * rebase onto vmwgfx changes * rebase onto xlnx changes * fix include statements in amdgpu Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
2022-10-19drm: Remove drm_mode_config::fb_baseZack Rusin
The fb_base in struct drm_mode_config has been unused for a long time. Some drivers set it and some don't leading to a very confusing state where the variable can't be relied upon, because there's no indication as to which driver sets it and which doesn't. The only usage of fb_base is internal to two drivers so instead of trying to force it into all the drivers to get it into a coherent state completely remove it. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
2022-09-20drm/hisilicon: Add depends on MMURandy Dunlap
The Kconfig symbol depended on MMU but was dropped by the commit acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu") because it already had as a dependency ARM64 that already selects MMU. But later, commit a0f25a6bb319 ("drm/hisilicon/hibmc: Allow to be built if COMPILE_TEST is enabled") allowed the driver to be built for non-ARM64 when COMPILE_TEST is set but that could lead to unmet direct dependencies and linking errors. Prevent a kconfig warning when MMU is not enabled by making DRM_HISI_HIBMC depend on MMU. WARNING: unmet direct dependencies detected for DRM_TTM Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n] Selected by [m]: - DRM_TTM_HELPER [=m] && HAS_IOMEM [=y] && DRM [=m] - DRM_HISI_HIBMC [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && (ARM64 || COMPILE_TEST [=y]) Fixes: acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: John Stultz <jstultz@google.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220531025557.29593-1-rdunlap@infradead.org
2022-01-27drm/hisilicon/hibmc: Allow to be built if COMPILE_TEST is enabledJavier Martinez Canillas
The commit feeb07d0ca5a ("drm/hisilicon/hibmc: Make CONFIG_DRM_HISI_HIBMC depend on ARM64") made the driver Kconfig symbol to depend on ARM64 since it only supports that architecture and loading the module on others would lead to incorrect video modes being used. But it also prevented the driver to be built on other architectures which is useful to have compile test coverage when doing subsystem wide changes. Make the dependency instead to be (ARM64 || COMPILE_TEST), so the driver is buildable when the CONFIG_COMPILE_TEST option is enabled. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211216210936.3329977-1-javierm@redhat.com
2022-01-19drm/hisilicon/hibmc: Replace module initialization with DRM helpersThomas Zimmermann
Replace module_pci_driver() with drm_module_pci_driver(). The DRM macro respects drm_firmware_drivers_only() and fails if the flag has been set. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-6-javierm@redhat.com
2021-07-23drm/hisilicon/hibmc: Remove variable 'priv' from hibmc_unload()Thomas Zimmermann
The variable 'priv' got introduced in commit 39a364a19e03 ("drm/hisilicon/hibmc: Convert to Linux IRQ interfaces") by accident. It's unused; remove it. Fixes a compiler warning. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 39a364a19e03 ("drm/hisilicon/hibmc: Convert to Linux IRQ interfaces") Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Dave Airlie <airlied@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210721131704.10306-1-tzimmermann@suse.de
2021-07-08drm/hisilicon/hibmc: Convert to Linux IRQ interfacesThomas Zimmermann
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210706075425.9257-1-tzimmermann@suse.de
2021-07-01drm/aperture: Pass DRM driver structure instead of driver nameThomas Zimmermann
Print the name of the DRM driver when taking over fbdev devices. Makes the output to dmesg more consistent. Note that the driver name is only used for printing a string to the kernel log. No UAPI is affected by this change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
2021-06-29drm/hibmc: Call drm_irq_uninstall() unconditionallyThomas Zimmermann
Remove the check around drm_irq_uninstall(). The same test is done by the function internally. The tested state in irq_enabled is considered obsolete and should not be used by KMS drivers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-3-tzimmermann@suse.de
2021-06-24drm/vram-helpers: Create DRM_GEM_VRAM_PLANE_HELPER_FUNCSDaniel Vetter
Like we have for the shadow helpers too, and roll it out to drivers. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-11-daniel.vetter@ffwll.ch
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-04-11drm/vram-helper: Use drm_gem_ttm_dumb_map_offset()Thomas Zimmermann
VRAM helpers now use drm_gem_ttm_dumb_map_offset() to implement struct drm_driver.dumb_map_offset. v2: * update hibmc as well (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-3-tzimmermann@suse.de
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 20:58:59 +0000