| Age | Commit message (Collapse) | Author |
|---|
|
Recent generations of Tegra have moved the display components outside of
host1x, leading to a device that has no CRTCs attached and hence doesn't
support any of the modesetting functionality. When this is detected, the
driver clears the DRIVER_MODESET and DRIVER_ATOMIC flags for the device.
Unfortunately, this causes the following errors during boot:
[ 15.418958] ERR KERN drm drm: [drm] *ERROR* Failed to register client: -95
[ 15.425311] WARNING KERN drm drm: [drm] Failed to set up DRM client; error -95
These originate from the fbdev client checking for the presence of the
DRIVER_MODESET flag and returning -EOPNOTSUPP. However, if a driver does
not support DRIVER_MODESET this is entirely expected and the error isn't
helpful.
Prevent this misleading error message by setting up the DRM clients only
if modesetting is enabled.
Changes in v2:
- use DRIVER_MODESET check to avoid registering any clients
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250613122838.2082334-1-thierry.reding@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Fixes the compile-time warnings
drivers/gpu/drm/clients/drm_client_setup.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_event.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_modeset.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_shmem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_ttm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612121633.229222-5-tzimmermann@suse.de
|
|
The intent of console_start was to resume a previously suspended console,
so rename it accordingly.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-4-0b878577f2e6@suse.com
[pmladek@suse.com: Fixed typo in the commit message. Updated also new drm_log.c.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The intent of console_stop was in fact to suspend it, so rename the
function accordingly.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-3-0b878577f2e6@suse.com
[pmladek@suse.com: Fixed typo in the commit message. Updated also new drm_log.c]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Without fonts, this fails to link:
drivers/gpu/drm/clients/drm_log.o: in function `drm_log_init_client':
drm_log.c:(.text+0x3d4): undefined reference to `get_default_font'
Select this, like the other users do.
Fixes: f7b42442c4ac ("drm/log: Introduce a new boot logger to draw the kmsg on the screen")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212154003.1313437-1-arnd@kernel.org
|
|
if DRM_CLIENT_SELECTION is enabled, and none of the client is, the
"Default DRM Client" choice is empty, and this makes Kconfig goes
into an infinite loop of:
Default DRM Client
choice[1-0?]: 0
Default DRM Client
choice[1-0?]: 0
Default DRM Client
choice[1-0?]: 0
....
So only allow the choice if at least one of the client is selected.
Fixes: f7b42442c4ac ("drm/log: Introduce a new boot logger to draw the kmsg on the screen")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/20241204160014.1171469-1-jfalempe@redhat.com/T/#md78853bba8904fd7614073f280f721d13ab0b432
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212091153.1592096-1-jfalempe@redhat.com
|
|
Add a module parameter, to increase the font size for HiDPI screen.
Even with CONFIG_FONT_TER16x32, it can still be a bit small to read.
In this case, adding drm_log.scale=2 to your kernel command line will
double the character size.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-7-jfalempe@redhat.com
|
|
Normally the console is already suspended when the graphic driver
suspend callback is called, but if the parameter no_console_suspend
is set, it might still be active.
So call console_stop()/console_start() in the suspend/resume
callbacks, to make sure it won't try to write to the framebuffer
while the graphic driver is suspended.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-6-jfalempe@redhat.com
|
|
Color the timesamp prefix, similar to dmesg.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-5-jfalempe@redhat.com
|
|
When userspace takes drm_master, the drm_client buffer is no more
visible, so drm_log shouldn't waste CPU cycle to draw on it.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-4-jfalempe@redhat.com
|
|
drm_log is a simple logger that uses the drm_client API to print the
kmsg boot log on the screen. This is not a full replacement to fbcon,
as it will only print the kmsg. It will never handle user input, or a
terminal because this is better done in userspace.
Design decisions:
* It uses the drm_client API, so it should work on all drm drivers
from the start.
* It doesn't scroll the message, that way it doesn't need to redraw
the whole screen for each new message.
It also means it doesn't have to keep drawn messages in memory, to
redraw them when scrolling.
* It uses the new non-blocking console API, so it should work well
with PREEMPT_RT.
This patch also adds a Kconfig menu to select the drm client to use.
It can be overwritten on the kernel command line with:
drm_client_lib.active=log or drm_client_lib.active=fbdev
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de> # console API
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-3-jfalempe@redhat.com
|
|
DRM drivers invoke drm_client_setup() to set up in-kernel clients.
No driver should call drm_fbdev_client_setup() directly. Therefore,
unexport the symbol and move the declaration to the internal header
drm_client_internal.h.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-4-tzimmermann@suse.de
|
|
Move the public header file drm_client_setup.h to the clients/
subdirectory and update all drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
|
|
Just move some files around to keep source code well organized. Plus
fix a type in the help text of CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-2-tzimmermann@suse.de
|
