| Age | Commit message (Collapse) | Author |
|---|
|
Adds gamma and color-transform support for DOU-IPS.
Adds two caps members fgamma_coeffs and ctm_coeffs to komeda_improc_state.
If color management changed, set gamma and color-transform accordingly.
v5: Rebase with drm-misc-next
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-5-james.qian.wang@arm.com
|
|
Sets output color format according to the connector formats and
display supported formats. Default value is RGB444 and only force
YUV format which must be YUV.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015091019.26021-1-lowry.li@arm.com
|
|
Set color_depth according to connector->bpc.
Changes since v1:
- Fixed min_bpc is effectively set but not used in
komeda_crtc_get_color_config().
Changes since v2:
- Align the code.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012065030.12691-1-lowry.li@arm.com
|
|
On D71, we are using the global line size. From D32, every
component have a line size register to indicate the fifo size.
So this patch is to set line size support and do the line size
check.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924080022.19250-2-lowry.li@arm.com
|
|
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This is a SW workaround for shadow un-flushed when together with the
DOU Timing-disable.
D71 HW doesn't update shadow registers when display output is turned
off. So when we disable all pipeline components together with display
output disabling by one flush or one operation, the disable operation
updated registers will not be flushed or valid in HW, which may lead
problem. To workaround this problem, introduce a two phase disable for
pipeline disable.
Phase1: Disable components with display is on and flush it, this phase
for flushing or validating the shadow registers.
Phase2: Turn-off display output.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906071750.4563-1-lowry.li@arm.com
|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for 5.4-rc1 merge window. I don't think
there is anything outstanding so next week should just be fixes, but
we'll see if I missed anything. I landed some fixes earlier in the
week but got delayed writing summary and sending it out, due to a mix
of sick kid and jetlag!
There are some fixes pending, but I'd rather get the main merge out of
the way instead of delaying it longer.
It's also pretty large in commit count and new amd header file size.
The largest thing is four new amdgpu products (navi12/14, arcturus and
renoir APU support).
Otherwise it's pretty much lots of work across the board, i915 has
started landing tigerlake support, lots of icelake fixes and lots of
locking reworking for future gpu support, lots of header file rework
(drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
put into the places they are needed.
uapi:
- content protection type property for HDCP
core:
- rework include dependencies
- lots of drmP.h removals
- link rate calculation robustness fix
- make fb helper map only when required
- add connector->DDC adapter link
- DRM_WAIT_ON removed
- drop DRM_AUTH usage from drivers
dma-buf:
- reservation object fence helper
dma-fence:
- shrink dma_fence struct
- merge signal functions
- store timestamps in dma_fence
- selftests
ttm:
- embed drm_get_object struct into ttm_buffer_object
- release_notify callback
bridges:
- sii902x - audio graph card support
- tc358767 - aux data handling rework
- ti-snd64dsi86 - debugfs support, DSI mode flags support
panels:
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
Himax8279d, Sharp LD-D5116Z01B
- TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1
i915:
- Initial tigerlake platform support
- Locking simplification work, general all over refactoring.
- Selftests
- HDCP debug info improvements
- DSI properties
- Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
suspend/resume
- GuC fixes
- Perf fixes
- ElkhartLake enablement
- DP MST fixes
- GVT - command parser enhancements
amdgpu:
- add wipe memory on release flag for buffer creation
- Navi12/14 support (may be marked experimental)
- Arcturus support
- Renoir APU support
- mclk DPM for Navi
- DC display fixes
- Raven scatter/gather support
- RAS support for GFX
- Navi12 + Arcturus power features
- GPU reset for Picasso
- smu11 i2c controller support
amdkfd:
- navi12/14 support
- Arcturus support
radeon:
- kexec fix
nouveau:
- improved display color management
- detect lack of GPU power cables
vmwgfx:
- evicition priority support
- remove unused security feature
msm:
- msm8998 display support
- better async commit support for cursor updates
etnaviv:
- per-process address space support
- performance counter fixes
- softpin support
mcde:
- DCS transfers fix
exynos:
- drmP.h cleanup
lima:
- reduce logging
kirin:
- misc clenaups
komeda:
- dual-link support
- DT memory regions
hisilicon:
- misc fixes
imx:
- IPUv3 image converter fixes
- 32-bit RGB V4L2 pixel format support
ingenic:
- more support for panel related cases
mgag200:
- cursor support fix
panfrost:
- export GPU features register to userspace
- gpu heap allocations
- per-fd address space support
pl111:
- CLD pads wiring support removed from DT
rockchip:
- rework to use DRM PSR helpers
- fix bug in VOP_WIN_GET macro
- DSI DT binding rework
sun4i:
- improve support for color encoding and range
- DDC enabled GPIO
tinydrm:
- rework SPI support
- improve MIPI-DBI support
- moved to drm/tiny
vkms:
- rework CRC tracking
dw-hdmi:
- get_eld and i2s improvements
gm12u320:
- misc fixes
meson:
- global code cleanup
- vpu feature detect
omap:
- alpha/pixel blend mode properties
rcar-du:
- misc fixes"
* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
drm/nouveau: Fix ordering between TTM and GEM release
drm/nouveau/prime: Extend DMA reservation object lock
drm/nouveau: Fix fallout from reservation object rework
drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
drm/i915: to make vgpu ppgtt notificaiton as atomic operation
drm/i915: Flush the existing fence before GGTT read/write
drm/i915: Hold irq-off for the entire fake lock period
drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
drm/i915/gvt: update vgpu workload head pointer correctly
drm/mcde: Fix DSI transfers
drm/msm: Use the correct dma_sync calls harder
drm/msm: remove unlikely() from WARN_ON() conditions
drm/msm/dsi: Fix return value check for clk_get_parent
drm/msm: add atomic traces
drm/msm/dpu: async commit support
drm/msm: async commit support
drm/msm: split power control from prepare/complete_commit
drm/msm: add kms->flush_commit()
...
|
|
'gnu_printf'
komeda/komeda_pipeline.c: In function 'komeda_component_add':
komeda/komeda_pipeline.c:212:3: warning: function 'komeda_component_add' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
vsnprintf(c->name, sizeof(c->name), name_fmt, args);
^~~~~~~~~
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813110759.10425-1-james.qian.wang@arm.com
|
|
Komeda HW can support dual-link which splits display frame to two halves
(left/link0, right/link1) and output them by two output links.
Due to the halved pixel rate of each link, the pxlclk of dual-link can be
reduced two times compare with single-link.
For enabling dual-link:
- The DT need to configure two output-links for the pipeline node.
- Komeda enable dual-link when both link0 and link1 have been connected.
Example of how the pipeline node will look like for dual-link setup
pipe0: pipeline@0 {
clocks = <&fpgaosc2>;
clock-names = "pxclk";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
dp0_pipe0_link0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dlink_connector_in0>;
};
dp0_pipe0_link1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dlink_connector_in1>;
};
};
};
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-3-james.qian.wang@arm.com
|
|
For layer_split no need user to enable/disable it, but compute it in
komeda internally, komeda will enable it if the scaling exceed the
acceptable range of scaler.
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708065923.4887-1-james.qian.wang@arm.com
|
|
Writeback split is also for workaround the size limitation of d71 scaler.
Like layer_split, writeback downscaling also can use two scalers to handle
the scaling half-by-half. The only differnence is writback needs a
standalone component (splitter)'s help to split the composition result.
The data pipeline of writeback split as below:
/-> scaler-0 ->\
compiz -> splitter merger -> wb_layer -> memory
\-> scaler-1 ->/
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
|
|
Similar to Layer Split, but Splitter is used for writeback, which splits
the compiz result to two half parts and then feed them to two scalers.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
|
|
One crtc can use two komeda_pipeline, and one works as master and as
slave. the slave pipeline doesn't have its own output and timing
ctrlr, but pre-composite the input layer data flow and then feed the
result to master. the pipeline configuration like:
slave-layer-0 \
... slave->CU
slave-layer-4 / \
\
master-layer-0 --------> master->CU -> ...
... /
master-layer-4 ------>
Since komeda Compiz doesn't output alpha, so the slave->CU result
only can be used as bottom input when blend it with master input data
flows.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Komeda supports two types of layer split:
- none-scaling split
- scaling split
Since D71 merger only support scaler as input, so for none-scaling split,
the two layer dflow will be output to compiz directly. for scaling_split,
the data flow will be merged by merger firstly, then output the merged
data flow to compiz.
Komeda handles the split in kernel completely to hide the detailed and
complicated split calcualtion to user mode, for user only need to set the
layer_split property to enable/disable it.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
To achieve same caling effect compare with none split, the texel
calculation need to use the same scaling ratio before split, so add
"total_xxx" to pipeline to describe the hsize/vsize before split.
Update pipeline and d71_scaler_update accordingly.
v2: Rebase and addressed Liviu's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Introduce a new component komeda_merger, because D71 HW supports to split
a whole image to two half parts and does the scaling independently. Merger
merges two separate results to one, and output it to compositor or wb_layer
For this patch:
- Add the definition of komeda_merger/merger_state
- Report and initialize komeda_merger according to the D71 HW.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
To avoid confusion, unify the driver main engine clk name "mclk" to
the spec name "aclk".
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.
But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1
So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.
drop pclk/pipeline->axiclk. but only keep one mclk in komeda driver.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Besides scaling, Arm display scaler also can support image enhancement.
For support it, Add a new property "img_enhancement" to plane, then user
can turn on/off it by this property, and kernel follow user's requirement
to maitain the state and enable/disable the real HW image enhancement.
v2: Rebase and rename "needs_img_enhancement" to "en_img_enhancement"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
For downscaling there is a restriction, the downscaling needed engine
clock can not acceed the real engine clock, and the clock requirement
mostly depend on the specific HW, to solve this problem:
1. Add a pipeline func - downscaling_clk_check for CORE to query the real
HW if downscaling can be supported.
2. Add new property clock ratio which is the ratio of:
(mclk << 32) / pxlclk
then User driver can use this ratio to do the clock check to avoid post
an invalid downscaling to kernel.
v2: Rebase and Delete debug print
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
1. Add scaler to writeback pipeline to enable the writeback scaling support
2. Display HW can not do upscaling for writeback, check it when validate.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
This patch add the initial and necessary logic for CORE to support scaler:
- Complete the struct komeda_scaler and komeda_scaler_state for adding
the scaler specific features and capablities.
- Implement komeda_scaler_validate to check the scaler with the data flow
configurations.
- Enable scaling support for plane input path (layer input data flow).
v2: Fix a typo, and rename "needs_scaling" to "en_scaling"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
For supporting AFBC:
1. Check if the user requested modifier can be supported by display HW.
2. Check the obj->size with AFBC's requirement.
3. Configure HW according to the modifier (afbc features)
This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/59000/
v2: Rebase and addressed Ayan's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Komeda driver uses a individual component to describe the HW's writeback
caps, but drivers doesn't define a new structure and still uses the
existing "struct komeda_layer" to describe this new component.
The detailed changes as follow:
1. Initialize wb_layer according to HW and report it to CORE.
2. CORE exposes wb_layer as a resource to KMS by private_obj.
3. Report writeback supporting by add a wb_connector to KMS, and then
wb_connector will take act as a component resources user,
so the func komeda_wb_encoder_atomic_check claims komeda resources
(scaler and wb_layer) accroding to its state configuration to the
wb_connector. and the wb_state configuration will be validated on the
specific component resources to see if the caps of component can
meet the requirement of wb_connector. if not check failed.
4. Update irq_handler to notify the completion of writeback.
NOTE:
This change doesn't add scaling writeback support, that support will
be added in the future after the scaler support.
v2: Rebase
v3: Rebase and constify the d71_wb_layer_funcs
v4: Addressed Ayan's comments
Depends on:
- https://patchwork.freedesktop.org/series/59915/
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Depends on:
- https://patchwork.freedesktop.org/series/58976/
- https://patchwork.freedesktop.org/series/59855/
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Fixed the warnings: Function parameter or member 'xxx' not described
when make htmldocs
This patch depends on:
- https://patchwork.freedesktop.org/series/54448/
- https://patchwork.freedesktop.org/series/54449/
- https://patchwork.freedesktop.org/series/54450/
v2: Rebase and add reporter
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Pass enable/disable command to komeda and adjust komeda hardware for
enable/disable a display instance.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
A komeda flush is comprised two steps:
1. update pipeline/component state to HW.
2. call dev_func->flush to notify HW to kickoff the update.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Komeda driver treats KMS-CRTC/PLANE as user which will acquire pipeline
resources, but we still need to release the unclaimed resources.
crtc_atomic_check is the final check stage, so beside build a display data
pipeline according the crtc_state, but still needs to release/disable the
unclaimed pipeline resources.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
This function builds a display output pipeline according to crtc_state.
And this change only added single pipeline support, the dual pipeline with
slave enabled data flow support will be added in the following change.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
build_layer_data_flow builds a input pipeline according to plane_state.
and in this initial stage only added this simplest pipeline usage:
Layer -> compiz
The scaler and layer_split will be added in the future.
v2:
- Rebase.
- Introduce struct komeda_data_flow_cfg
- Add a function komeda_component_validate_private to replace the MACRO
component_validate_private
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Add a debugfs node "register" and entry function dump_register to
dev/pipeline/component to register dump, then user can read
"/sys/kernel/debug/komeda/register" to get the register values via these
chip function.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
[Added the d71_layer_dump() function that was in a previous commit]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
komeda_accemble_pipelines is for:
1. Verifing the component->supported_inputs according to the
pipeline->avail_components.
2. Generating component->supported_outputs.
v2: Lower the debug message of komeda_component_dump to DRM_DEBUG.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Add and initialize improc and timing_ctrlr according to D71 capablitites
v2: Rebase.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Implement d71_compiz_init and add compiz component to komeda-CORE
v2: Rebase.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
1. Add detailed layer/layer_state definitions
2. Add d71_layer_init to report layer features and capabilities according
to D71 layer block.
3. Add d71_layer_updat/disable
v2: Rebase.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
[removed d71_layer_dump() from this commit]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Add komeda_kms abstracton to attach komeda_dev to DRM-KMS
CRTC: according to the komeda_pipeline
PLANE: according to komeda_layer (layer input pipeline)
PRIVATE_OBJS: komeda_pipeline/component all will be treat as private_objs
komeda_kms is for connecting DRM-KMS and komeda_dev, like reporting the
kms object properties according to the komeda_dev, and pass/convert KMS's
requirement to komeda_dev.
Changes in v4:
- Set drm_atomic_helper_check as mode_config->atomic_check.
Changes in v3:
- Fixed style problem found by checkpatch.pl --strict.
Changes in v2:
- Unified abbreviation of "pipeline" to "pipe".
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
komeda_format_caps is for describing ARM display specific features and
limitations of a specific format, and format_caps will be linked into
&komeda_framebuffer like a extension of &drm_format_info.
And komed_format_caps_table will be initialized before the enum_resources,
since the layer features description depend on this format_caps table, so
we'd better initialize the table first.
Changes in v4:
- Rebase.
Changes in v3:
- Fixed style problem found by checkpatch.pl --strict.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Parse DT and initialize corresponding dev/pipeline attributes.
Changes in v4:
- Rebase.
Changes in v3:
- Fixed style problem found by checkpatch.pl --strict.
Changes in v2:
- Unified abbreviation of "pipeline" to "pipe".
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
1. Added a brief definition of komeda_dev/pipeline/component, this change
didn't add the detailed component features and capabilities, which will
be added in the following changes.
2. Corresponding resources discovery and initialzation functions.
Changes in v4:
- Deleted unnecessary headers
Changes in v3:
- Fixed style problem found by checkpatch.pl --strict.
Changes in v2:
- Unified abbreviation of "pipeline" to "pipe".
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
