| Age | Commit message (Collapse) | Author |
|---|
|
Add support to set ISP clocks for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_soft_freq_range() API to set clocks via
SMU interface than communicating with PMFW directly.
amdgpu_dpm_set_soft_freq_range() is updated to take in any
pp_clock_type than limiting to support only PP_SCLK to allow
ISP and other driver modules to set the min/max clocks. Any
clock specific restrictions are expected to be taken care in
SOC specific SMU implementations instead of generic amdgpu_dpm
and amdgpu_smu interfaces.
Reviewed-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support to set ISP power for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_powergating_by_smu() API to
enable / disable power via SMU interface than communicating
with PMFW directly.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
move the dpm table setting back after featureenablemend due to dependancy.
For SMUv13.0.6, there is no pptable. Those frequency tables are available
through FW metrics and it needs DPM to be enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update pcie dpm parameters before smu feature enablement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add amdgpu_bo_fb_aper_addr() and update the cached GPU addresses to use
the FB aperture address for SMU and PSP.
2 reasons for this change:
1. when pdb0 is enabled, gpu addr from amdgpu_bo_create_kernel() is GART
aperture address, it is not compatible with SMU and PSP, it need to be
updated to use FB aperture address.
2. Since FB aperture address will change after switching to new GPU
index after hibernation, it need to be updated on resume.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add interfaces to query compute partition related metrics data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu_mode2_reset_is_support() was added in 2020 by
commit 5c03e5843e6b ("drm/amdgpu:add smu mode1/2 support for aldebaran")
but has remained unused.
See discussion at:
https://lore.kernel.org/all/DM4PR12MB5165D85BD85BC8FC8BF7A3B48E88A@DM4PR12MB5165.namprd12.prod.outlook.com/
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the callback for implementation for swsmu.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement VCN engine reset by sending MSG_ResetVCN
on smu 13.0.6.
v2: fix format for code and message
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add link reset implementation
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use amdgpu_sriov_multi_vf_mode to replace amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev).
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Store it per instance so we can track it per instance.
v2: index instances directly on vcn1.0 and 2.0 to make
it clear that they only support a single instance (Lijo)
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
display performance level when set not supported
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch introduces a new function to check if the SMU supports resetting the SDMA engine.
This capability check ensures that the driver does not attempt to reset the SDMA engine
on hardware that does not support it.
The following changes are included:
- New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset
support at the AMDGPU driver level.
- New function `smu_reset_sdma_is_supported` to check SDMA reset support
at the SMU level.
- Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific
SMU version v13.0.6.
- Updated `smu_v13_0_6_reset_sdma` to use the new capability check before
attempting to reset the SDMA engine.
v2: change smu_reset_sdma_is_supported type to bool (Tim)
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On SMU v13.0.12, always query the firmware to get the current power
limit as it could be updated through other means also.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes drm/amd/pm version 11.5.2
Signed-off-by: YING LI <yingli12@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now that we can select a workload profile dynamically when
we submit work, it's best to default to the bootup
default workload profile. Defaulting to other profiles
prevents some power management features from kicking in
during idle periods. Once all jobs have finished, the
workload profile will automatically move back to default
bootup for max power savings.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes SMU IP version 14.0.5.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add support for new smu 13_0_12 version
v2: Updated subject & moved skipping p2s init to a separate patch
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'smu_dpm_set_power_gate' function
This commit adds the missing kdoc parameter descriptor for 'inst' in the
smu_dpm_set_power_gate function.
The 'inst' parameter, which specifies the instance of the IP block to
power gate/ungate.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:359: warning: Function parameter or struct member 'inst' not described in 'smu_dpm_set_power_gate'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pass ip_block instead of adev in set_powergating_state callback function.
Modify set_powergating_state ip functions for all correspoding ip blocks.
v2: fix a ip block index error.
v3: remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an instance parameter to set_powergating_by_smu() function, and
re-write all amd_pm functions accordingly. Then use the instance to
call smu_dpm_set_vcn_enable().
v2: remove duplicated functions.
remove for-loop in smu_dpm_set_power_gate(), and temporarily move it to
to amdgpu_dpm_set_powergating_by_smu(), in order to keep the exact same
logic as before, until further separation in next patch.
v3: add instance number in error message.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
First, add an instance parameter to smu_dpm_set_vcn_enable() function,
and calling dpm_set_vcn_enable() with this given instance.
Second, modify vcn_gated to be an array, to track the gating status
for each vcn instance separately.
With these 2 changes, smu_dpm_set_vcn_enable() will check and set the
gating status for the given vcn instance ONLY.
v2: remove duplicated functions.
remove for-loop in dpm_set_vcn_enable(), and temporarily move it to
to smu_dpm_set_power_gate(), in order to keep the exact same logic as
before, until further separation in next patch.
v3: add instance number in error message.
v4: declaring i at the top of the function.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For smu ip with multiple vcn instances (smu 11/13/14), remove all the
for loop in dpm_set_vcn_enable() functions. And use the instance
argument to power up/down vcn for the given instance only, instead
of powering up/down for all vcn instances.
v2: remove all duplicated functions in v1.
remove for-loop from each ip, and temporarily move to dpm_set_vcn_enable,
in order to keep the exact same logic as before, until further separation
in the next patch.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6.
v2: Add firmware version for the reset message.
v3: Add ip version check. Print inst_mask on failure.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Refactor such that individual SMU IP versions can choose the startup
power profile mode. If no preference, then use the generic default power
profile selection logic.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
This reverts commit 74e1006430a5377228e49310f6d915628609929e.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
This came back after a merge in 6.13-rc1, so revert again.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 44f392fbf628a7ff2d8bb8e83ca1851261f81a6f)
|
|
add gen5 display to the user on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
Together with the feature to enable or disable zero RPM in the last
commit, it also makes sense to expose the OD setting determining under
which temperature the fan should stop if zero RPM is enabled.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Whilst we have support for setting fan curves there is no support for
disabling the zero RPM feature. Since the relevant bits are already
present in the OverDriveTable, hook them up to a sysctl setting so users
can influence this behaviour.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3489
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct the workload setting in order not to mix the setting
with the end user. Update the workload mask accordingly.
v2: changes as below:
1. the end user can not erase the workload from driver except default workload.
2. always shows the real highest priority workoad to the end user.
3. the real workload mask is combined with driver workload mask and end user workload mask.
v3: apply this to the other ASICs as well.
v4: simplify the code
v5: refine the code based on the review comments.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an instance parameter to the existing function dpm_set_vcn_enable()
for future implementation. Re-write all pptable functions accordingly.
v2: Remove duplicated dpm_set_vcn_enable() functions in v1. Instead,
adding instance parameter to existing functions.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some devices do not support fullscreen 3D.
v2: Make the check generic.
Fixes: 336568de918e ("drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
|
|
On chips that support it, you can specificy 0 and 0xffff for
min and max and the PMFW will use that to determine the optimal
min and max. This enables optimal performance when the
user manually switches between performance levels using sysfs.
Previously we'd set soft min/max which could limit performance.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This uses more aggressive hueristics than the the bootup default
profile. On windows the OS has a special fullscreen 3D mode
where this is used. Since we don't have the equivalent on Linux
default to this profile for dGPUs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1500
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3131
Fixes: c50fe289ed72 ("drm/amdgpu/swsmu: always force a state reprogram on init")
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Needed to set the workload type at init time so that
we can apply the navi3x margin optimization.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3131
Fixes: c50fe289ed72 ("drm/amdgpu/swsmu: always force a state reprogram on init")
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of resume.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of late_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the ptr handle to amdgpu_ip_block ptr in all
the functions of late_init function ptr.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update the handle ptr to amdgpu_ip_block ptr
for all functions pointers on early_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
