summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn35.c
AgeCommit message (Collapse)Author
2025-06-18drm/amd/display: Add pwait status to DMCUB diagnosticsNicholas Kazlauskas
[Why] To know if the firmware is idle when logging. [How] Add the pwait status to the DMCUB diagnostics. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-03drm/amd/display: Update DMCUB loading sequence for DCN3.5Nicholas Kazlauskas
[Why] New sequence from HW for reset and firmware reloading has been provided that aims to stabilize the reload sequence in the case the firmware is hung or has outstanding requests. [How] Update the sequence to remove the DMUIF reset and the redundant writes in the release. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add more debug data to dmub_srvJoshua Aberback
[Why] When analyzing some crash dumps, not all of the expected DMUB info was available, so we want to add in-object storage for this data. [How] - dmub_srv_debug (renamed to dmub_timeout_info) is already a member of dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in dmub_srv - use dmub_srv->debug when collecting diagnostic info instead of stack object to allow for easy inspection in crash dumps Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Ensure DMCUB idle before reset on DCN31/DCN35Nicholas Kazlauskas
[Why] If we soft reset before halt finishes and there are outstanding memory transactions then the memory interface may produce unexpected results, such as out of order transactions when the firmware next runs. These can manifest as random or unexpected load/store violations. [How] Increase the timeout before soft reset to ensure the DMCUB has quiesced. This is effectively 1s maximum based on experimentation. Use the enable bit check on DCN31 like we're doing on DCN35 and reorder the reset writes to follow the HW programming guide. Ensure we're reading SCRATCH7 instead of SCRATCH8 for the HALT code. No current versions of DMCUB firmware use the SCRATCH8 boot bit to dynamically switch where the HALT code goes to maintain backwards compatibility with PSP. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Revert "Increase halt timeout for DMCUB to 1s"Nicholas Kazlauskas
This reverts commit 50f040c53ea9 ("drm/amd/display: Increase halt timeout for DMCUB to 1s") There's two issues here: 1. Each poll is closer to 10us than 1us so it stalls for 15s on PNP. 2. We're reading the wrong scratch register to check for the HALT code. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Increase halt timeout for DMCUB to 1sNicholas Kazlauskas
[Why] If we soft reset before halt finishes and there are outstanding memory transactions then the memory interface may produce unexpected results, such as out of order transactions when the firmware next runs. These can manifest as random or unexpected load/store violations. [How] Increase the timeout before soft reset to ensure the DMCUB has quiesced. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Remove inaccessible registers from DMU diagnosticsNicholas Kazlauskas
[Why] SEC_CNTL isn't readable by x86 and can block Z8 entry if read. [How] Remove the read. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add a boot option to reduce phy ssc for HBR3Hansen Dsouza
[Why] Spread on DPREFCLK by 0.3 percent can have a negative effect on sink when PHY SSC is also spread by 0.3 percent [How] Add boot option for DMU to lower PHY SSC Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Restructure dpia link trainingPeichen Huang
[WHY] We intend to consolidate dp tunneling and conventional dp link training. [HOW] 1. Use the same link training entry for both dp and dpia 2. Move SET_CONFIG of non-transparent mode to dmub side 3. Add set_tps_notification dmub_cmd to notify tps request for non-transparent dpia link training 4. Check dpcd request result and abort link training early if dpia aux tunneling fails 5. Add option to avoid affect old product 6. Separately handle wait_time_microsec for dpia Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Add logs for debugging outboxCruise
The DP tunnel AUX reply is received through Outbox1. Print the Outbox1 status if an issue occurs. Signed-off-by: Cruise <Cruise.Hung@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add debug option for disabling SLDO optimizationsNicholas Kazlauskas
[Why] DM can hook this up to disable SLDO optimizations in firmware during DMCUB initialization for debug purposes. [How] Add the option and pass it through dmub_srv. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Remove register from DCN35 DMCUB diagnostic collectionNicholas Kazlauskas
[Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Read default boot optionsDuncan Ma
[WHY] DPIA boot option is set by VBIOS. It gets overwritten when driver loads DMU. [HOW] Read PreOS boot options and determine if dpia is enabled. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/display: Pass sequential ONO bit to DMCUB boot optionsNicholas Kazlauskas
[Why] IPS ono sequence ordering differs based on the ASIC. [How] Detect the ASIC ID revision and set the boot option accordingly. Feed it through the DCN35 DMUB functions. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add extra DMUB logging to track message timeoutAlvin Lee
[Description] - Add logging for first DMUB inbox message that timed out to diagnostic data - It is useful to track the first failed message for debug purposes because once DMUB becomes hung (typically on a message), it will remain hung and all subsequent messages. In these cases we're interested in knowing which is the first message that failed. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Fix S4 hang polling on HW power up done for VBIOS DMCUBNicholas Kazlauskas
[Why] VBIOS DMCUB firmware doesn't set the dal_fw bit and we end up hanging waiting for HW power up done because of it. [How] Simplify the path and allow mailbox_rdy to be a functional check when we detect VBIOS firmware. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-14drm/amd/display: Add shared firmware state for DMUB IPS handshakeNicholas Kazlauskas
[Why] Read modify write hazards can occur when using a single shared scratch register between driver and firmware leading to driver accessing DCN in IPS2 and a system hang. [How] Add infrastructure for using REGION6 as a shared firmware state between driver and firmware. This region is uncachable. Replace the existing get/set idle calls with reads/writes to the (volatile) shared firmware state blocks that a separated by at least a cache line between firmware and driver. Remove the workarounds that required rewriting/checking read modify write hazards. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DCN35 DMUBQingqing Zhuo
[Why & How] Add DMUB handling for DCN35. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 08:16:42 +0000