summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
AgeCommit message (Collapse)Author
2025-07-15drm/amd/display: Initial support for SmartMuxAurabindo Pillai
SmartMux is a mechanism to switch the GPU being used for scanout in a hybrid configuration. This is used for devices with an eDP and two GPUs. This is only valid when the system has a physical switch (Multiplexer) in the board to switch between the two GPUs. When a graphically intensive workload like a game is being run, the system can be switch the active display to the dGPU, so that we can avoid copying the buffer from dGPU to APU for scanout. This helps with latency and FPS. When power consumption is preferred, the system can be switched to the APU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Remove unused tunnel BW validationCruise Hung
[Why & How] The tunnel BW validation code has changed to the new one. Remove the unused code. The DP tunneling overhead is not updated in SST. Move updating DP tunneling overhead for both SST and MST. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add num_slices_h to set_dto_dscclk signatureIlya Bakoulin
Add the number of horizontal slices argument to allow configuring clock based on slice number. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add new DP tunnel bandwidth validationCruise Hung
[Why & How] Add new function for DP tunnel bandwidth validation. It uses the estimated BW and allocated BW to validate the timings. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-03drm/amd/display: Avoid trying AUX transactions on disconnected portsWayne Lin
[Why & How] Observe that we try to access DPCD 0x600h of disconnected DP ports. In order not to wasting time on retrying these ports, call dpcd_write_rx_power_ctrl() after checking its connection status. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-16drm/amd/display: Support external tunneling featureCruise Hung
[Why & How] The original code only supports the tunneling for embedded one. To support external tunneling feature, it needs to check Tunneling_Support bit register. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-13drm/amd/display: fix link_set_dpms_off multi-display MST corner caseGeorge Shen
[Why & How] When MST config is unplugged/replugged too quickly, it can potentially result in a scenario where previous DC state has not been reset before the HPD link detection sequence begins. In this case, driver will disable the streams/link prior to re-enabling the link for link training. There is a bug in the current logic that does not account for the fact that current_state can be released and cleared prior to swapping to a new state (resulting in the pipe_ctx stream pointers to be cleared) in between disabling streams. To resolve this, cache the original streams prior to committing any stream updates. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Change notification of link BW allocationCruise Hung
[WHY & HOW] The response of DP BW allocation is handled in Outbox ISR. When it failed to request the DP BW allocation, it sent another DPCD request in Outbox ISR immediately. The DP AUX reply also uses the Outbox ISR. So, no AUX reply happened in this case. Change to use HPD IRQ for the notification. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: replace dio encoder accessPeichen Huang
[WHY] replace dio encoder access to work with new dio encoder assignment. [HOW} 1. before validation, access dio encoder by get_temp_dio_link_enc() 2. after validation, access dio encoder through pipe_ctx->link_res Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: improve dpia pre-trainPeichen Huang
[WHY] We see unstable DP LL 4.2.1.3 test result with dpia pre-train. It is because the outbox interrupt mechanism can not handle HPD immediately and require some improvement. [HOW] 1. not enable link if hpd_pending is true. 2. abort pre-train if training failed and hpd_pending is true. 3. check if 2 lane supported when it is alt mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Update chip_cap defines and usageMichael Strauss
[WHY] The defines have also been updated with prefix AMD_ and atomfirmware.h has been temporarily updated with both sets of defines to allow the transition. This update is being made to standardize workaround chip_cap flags, in order to support more workaround flags in the future. [HOW] Updated EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN define, the flag is now an enum masked by EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK. All checks for DP_FIXED_VS_EN are now performed by masking with EXT_CHIP_MASK and checking for an exact match rather than the previous bitwise AND check. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add HBlank reduction DPCD write to DPMS sequenceGeorge Shen
[Why] Certain small HBlank timings may not have a large enough HBlank to support audio when low bpp DSC is enabled. HBlank expansion by the source can solve this problem, but requires the branch/sink to support HBlank reduction. [How] Update DPMS sequence to call DM to perform DPCD write to enable HBlank reduction on the branch/sink. Add stub in dm_helpers to be implemented later. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: have pretrain for dpiaPeichen Huang
[WHY] We like to have pretrain for dpia link so that dp and dp tunneling have aligned behavior. The Main difficult for dpia pretrain is that encoder can not get corresponded dpia port when link detection in current implementation. [HOW] 1. create enable/disable dpia output functions for dcn35 encoder and have dpia_id and other necessary info as inputs. 2. dcn35 dpia use the new functions to enable/disable output. 3. have a option to enable/disable the change. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Block Invalid TMDS operationChris Park
[Why] When sink type is TMDS, PHY programming does not block against pixel clock greater than 600MHz. [How] Based on sink type, block greater than 600MHz phy programming. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add hblank borrowing supportChris Park
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Optimize power up sequence for specific OLEDOvidiu Bunea
[why & how] OLED power up sequence takes an extra 150ms via hardcoded delay, but there is a strict requirement on DisplayOn resume time. For customer panel, remove these delays to meet target until a cleaner solution is can be put in place. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Support UHBR10 link rate on eDPSung Joon Kim
[why] Supporting UHBR10 link rate on eDP leverages the existing DP2.0 code but need to add some small adjustments in code. [how] Acknowledge the given DPCD caps for UHBR10 link rate support and allow DP2.0 programming sequence and link training for eDP. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Program DIG FE source select for DVI before PHY enAlvin Lee
[Description] In newer DCN's the programming of SYMCLK_FE_SRC_SEL depends on the value of DIG_FE_SOURCE_SELECT. If DIG_FE_SOURCE_SELECT is not already programmed at the time of PHY / DIG enable then the FW sequence will program an incorrect SYMCLK source. Ensure that we program DIG_FE_SOURCE_SELECT for all DIO scenarios (DVI in this particular case) before going through the PHY / DIG enable sequence. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: turn on symclk for dio virtual stream in dpms sequenceWenjing Liu
[why] In order to support glitchless display clock ramping for virtual stream, we must turn on symclk for stream encoder. The code will power on phy and enable symclk for dio encoder during virtual stream dpms sequence. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: reset DSC clock in post unlock updateWenjing Liu
[why] Switching between DSC clock or disable DSC block are not double buffered update. Corruption is observed if these updates happen before DSC double buffered disconnection. [how] Move DSC disable and refclk reset to post unlock update. Wait for DSC double buffered disconnection and all mpccs are disconnected before reset DSC clock. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Change ASSR disable sequenceSwapnil Patel
[Why] Currently disabling ASSR before stream is disabled causes visible display corruption. [How] Move disable ASSR command to after stream has been disabled. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add condition for dp_set_dsc_config callIlya Bakoulin
Not every ASIC implements dp_set_dsc_config. Add condition to prevent calls to unimplemented function. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Skip SST ACT polling when sink_count is 0George Shen
[Why] Upon disconnecting a UHBR SST display, the disconnection and the SetTimings to disable the display can occur such that link_set_dpms_off occurs after the disconnection has already processed (link->type is dc_connection_none). Thus, the AUX related operations should be skipped when clearing the payload allocation table. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Fix uninitialized variables in DCAlex Hung
This fixes 49 UNINIT issues reported by Coverity. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: refactor vpg.hParandhaman K
why and how: as part of cleanup, need to refactor vpg. It was improperly referenced as a dcn specfic part of link. the dcn agnostic code needed was ripped out and put into vpg.h, now in dc/inc/hw. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Parandhaman K <parandhaman.k@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Fix compiler warnings on high compiler warning levelsAric Cyr
[why] Enabling higher compiler warning levels results in many issues that can be trivially resolved as well as some potentially critical issues. [how] Fix all compiler warnings found with various compilers and higher warning levels. Primarily, potentially uninitialized variables and unreachable code. Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-22drm/amd/display: Enable new interface design for alternate scramblingSung Joon Kim
[why & how] To enable a new interface so alternate scrambling can be done via security module. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-22drm/amd/display: Add usb4_bw_alloc_support flagPeichen Huang
[Why] dc should have a flag for DM to enable usb4_bw_alloc in dptx [How] - Add usb4_bw_alloc_support flag in dc_config Reviewed-by: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Peichen Huang <peichen.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-15drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()'Srinivasan Shanmugam
In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc' was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc' NULL pointer check. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903) Cc: stable@vger.kernel.org Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-09drm/amd/display: Request usb4 bw for mst streamsPeichen Huang
[WHY] When usb4 bandwidth allocation mode is enabled, driver need to request bandwidth from connection manager. For mst link, the requested bandwidth should be big enough for all remote streams. [HOW] - If mst link, the requested bandwidth should be the sum of all mst streams bandwidth added with dp MTPH overhead. - Allocate/deallcate usb4 bandwidth when setting dpms on/off. - When doing display mode validation, driver also need to consider total bandwidth of all mst streams for mst link. Reviewed-by: Cruise Hung <cruise.hung@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Peichen Huang <peichen.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-06drm/amd/display: add support for DTO genarated dscclkWenjing Liu
Current implementation will choose to use refclk as dscclk. This is not recommended by hardware team as refclk is a fixed value which could cause unnecessary power consumption or it could be not enough for large DSC timings. So we are adding new interfaces so we could switch to use dynamically generated DSCCLK by DTO. So DSCCLK is programmable based on current pixel clock and dispclk. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-06drm/amd/display: Fix MST PBN/X.Y value calculationsIlya Bakoulin
Changing PBN calculation to be more in line with spec. We don't need to inflate PBN_NATIVE value by the 1.006 margin, since that is already taken care of in the get_pbn_per_slot function. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: adjust flow for deallocation mst payloadWayne Lin
[Why] MST relevant variables are maintained at drm side. As the result, we still have to call drm_dp_remove_payload_part2() to update the relevant values regardless the link is under mst mode or not. We used to have a workaround patch to tackle this: commit 3d8fcc6740c9 ("drm/amd/display: Extract temp drm mst deallocation wa into its own function") Now it's time to remove the workaround and adjust the flow. [How] During deallocate_mst_payload(), source actually doesn't send out ALLOCATE_PAYLOAD at the end as like the flow in allocate_mst_payload(). Call function dm_helpers_dp_mst_send_payload_allocation() at the end of deallocate_mst_payload() is a bit confusing. Separate dm_helpers_dp_mst_send_payload_allocation() into 2 functions. Have a new function dm_helpers_dp_mst_update_mst_mgr_for_deallocation() to replace dm_helpers_dp_mst_send_payload_allocation() for payload deallocation. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Simplify brightness initializationCamille Cho
[Why] Remove the brightness cache in DC. It uses a single value to represent the brightness for both SDR and HDR mode. This leads to flash in HDR on/off. It also unconditionally programs brightness as in HDR mode. This may introduce garbage on SDR mode in miniLED panel. [How] Simplify the initialization flow by removing the DC cache and taking what panel has as default. Expand the mechanism for PWM to DPCD Aux to restore cached brightness value generally. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Camille Cho <camille.cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-26drm/amd/display: Remove power sequencing checkAgustin Gutierrez
[Why] Some ASICs keep backlight powered on after dpms off command has been issued. [How] The check for no edp power sequencing was never going to pass. The value is never changed from what it is set by design. Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: switch DC over to the new DRM logging macrosHamza Mahfooz
For multi-GPU systems it is difficult to tell which GPU a particular message is being printed for and that is undesirable because it complicates debugging efforts. Also, the new macros allow us to enable logging for particular parts of the codebase more selectively (since we no longer need to throw everything at DRM_DEBUG_KMS()). So, for the reasons outlined above we should switch to the new macros. We can accomplish this by using the existing DC_LOGGER code to pass around the relevant `struct drm_device` which will be fed to the new macros in logger_types.h. Also, we must get rid of all instances of the DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use the DC logger there and we can simply refer to the macros directly there instead. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Drop unused link FPGA codeRodrigo Siqueira
There are multiple parts of the code that DC does not use anymore, and this commit drops those dead codes. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: clean up some inconsistent indentingJiapeng Chong
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:2476 link_set_dpms_on() warn: if statement not indented. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6502 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: minior logging improvementsWenjing Liu
[how] - Add minimial transition log with reason and base state. - Do not log set dpms interfaces for virtual signal in stream. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DCN35 DIOQingqing Zhuo
[Why & How] Add DIO handling for DCN35. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Refactor edp power controlIan Chen
[Why & How] To organize the edp power control a bit: 1. add flag in dc_link to indicate dc to skip all implicit eDP power control. 2. add edp_set_panel_power link service for DM to call. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: implement pipe type definition and adding accessorsWenjing Liu
[why] There is a lack of encapsulation of pipe connection representation in pipe context. This has caused many challenging bugs and coding errors with repeated logic to identify the same pipe type. [how] Formally define pipe types and provide getters to identify a pipe type and find a pipe based on specific requirements. Update existing logic in non dcn specific files and dcn32 and future versions to use the new accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Add link encoding to timing BW calculation parametersGeorge Shen
[Why] There certain cases where the timing BW is dependent on the type of link encoding in use. Thus to calculate the correct BW required for a given timing, the link encoding should be added as a parameter. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Cache backlight_millinits in link structure and setting ↵Nicholas Susanto
brightness accordingly [Why] Need to save the cached backlight level so that display lights up using appropriate brightness level instead of the default brightness when waking up from s0i3. [How] Adding a backlight level cache in link structure. Also instead on calling set_default_brightness_aux, check if cached values exists. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Setup stream encoder before link enable for TMDSJinZe Xu
[Why] HDMI spec requires TMDS clock to be not more than 340MHz. Stream encoder ensure this requirement but driver enable stream encoder later than PHY. So PHY will output full speed TMDS clock first. [How] Enable stream encoder first in TMDS case. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: JinZe Xu <jinze.xu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add control flag to dc_stream_state to skip eDP BL off/link offMax Tseng
Add control flag to dc_stream_state to skip eDP BL off/link off. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: clean up some inconsistent indentingJiapeng Chong
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:2377 link_set_dpms_on() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5376 Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Improvement for handling edp link training failsJingwen Zhu
[Why] The eDP retrain will cause the DPCD 300 to be reset to default. And cause the brightness can't be set correctly. [How] delete the call to edp panel power control in both enable_link_output/disable_link_output entirely and only call edp panel control in enable_link_dp and  disable_link_dp once. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 14:59:43 +0000