summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/inc
AgeCommit message (Collapse)Author
2025-07-15drm/amd/display: Initial support for SmartMuxAurabindo Pillai
SmartMux is a mechanism to switch the GPU being used for scanout in a hybrid configuration. This is used for devices with an eDP and two GPUs. This is only valid when the system has a physical switch (Multiplexer) in the board to switch between the two GPUs. When a graphically intensive workload like a game is being run, the system can be switch the active display to the dGPU, so that we can avoid copying the buffer from dGPU to APU for scanout. This helps with latency and FPS. When power consumption is preferred, the system can be switched to the APU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: Add static pg implementations for future useLeo Chen
[Why & How] Add static pg implementations and debug flags for future use. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: Refactor DSC cap calculationsDillon Varone
[WHY] DSC block level should only be responsible for reporting single DSC instance capabilities. Factoring in ODM combine requirements should be handled in dc_dsc.c. Both components should acquire clocks from clk_mgr to determine throughput capabilities instead of relying on hard coded values as these can differ by SoC and SKU. [HOW] 1) Add dsc_get_single_enc_caps to acquire single DSC instance capabilities (replacing dsc_get_enc_caps), factoring in DSCCLK 2) add build_dsc_enc_caps to combine single DSC instance capabilities 3) account for max pixel rate per pipe (DISPCLK) when calculating minimum slice count Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: MPC basic allocation logic and TMZYihan Zhu
[WHY & HOW] Adding basic logic to allocate unused RMCM block and TMZ support. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Fix Link Override Sequencing When Switching Between DIO/HPOMichael Strauss
[WHY] When performing certain link maintenance compliance tests or forcing link settings, changing between 128b/132b and 8b/10b rates no longer works on some ASICs. Some rate divider updates only occur when we set timings or validate state, which is not performed currently when toggling DPMS to change rates. [HOW] Re-calculate dividers and reprogram audio when switching between DIO and HPO through DP compliance/escape code path. Add OTG disable/re-enable so we don't touch the clock while OTG is active. Acquire dcLock before forcing link settings to avoid thread synchronization errors due to added programming in escape code path and potential HPD interrupts. Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Remove unused tunnel BW validationCruise Hung
[Why & How] The tunnel BW validation code has changed to the new one. Remove the unused code. The DP tunneling overhead is not updated in SST. Move updating DP tunneling overhead for both SST and MST. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add num_slices_h to set_dto_dscclk signatureIlya Bakoulin
Add the number of horizontal slices argument to allow configuring clock based on slice number. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add new DP tunnel bandwidth validationCruise Hung
[Why & How] Add new function for DP tunnel bandwidth validation. It uses the estimated BW and allocated BW to validate the timings. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: add APG struct to stream_enc for future useCharlene Liu
some new asics will have an APG instance taking over certain functions. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Fix kernel docs for new struct membersAlex Hung
[WHAT & HOW] Add kernel-doc for new struct members for lut3d_caps and mpc_funcs. This fixes the follow warnings from "make htmldocs". ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1106: warning: Function parameter or struct member 'mcm' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1106: warning: Function parameter or struct member 'rmcm' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/dc.h:249: warning: Function parameter or struct member 'mcm_3d_lut_caps' not described in 'mpc_color_caps' ./drivers/gpu/drm/amd/display/dc/dc.h:249: warning: Function parameter or struct member 'rmcm_3d_lut_caps' not described in 'mpc_color_caps' ./drivers/gpu/drm/amd/display/dc/dc.h:249: warning: Function parameter or struct member 'preblend' not described in 'mpc_color_caps' Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Add RMCM debug loggingYihan Zhu
[WHY & HOW] Add new FL feature debug logging into the existing DTN logging. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Refactor DML2 DC power instanceDillon Varone
[WHY & HOW] Use a dedicated DC power option and instance pair. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-03drm/amd/display: replace fast_validate with enum dc_validate_modeYan Li
[Why] The boolean fast_validate is used as an input parameter in multiple functions. To support more scenarios, we are replacing it with enum dc_validate_mode. [How] The enum dc_validate_mode introduces three possible values: 1) DC_VALIDATE_MODE_AND_PROGRAMMING: Apply the mode to hardware 2) DC_VALIDATE_MODE_ONLY: Check whether the mode can be supported 3) DC_VALIDATE_MODE_AND_STATE_INDEX: Check if the mode can be supported, and determine the optimal voltage level needed to support it. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yan Li <yan.li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-03drm/amd/display: Add DML path for FAMS methodsOleh Kuzhylnyi
[Why] DML needs a path for FAMS methods. [How] Apply instance of fams2_stream_sub_params_v2 structure with a FAMS placeholder for DML. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-16drm/amd/display: Move mcache allocation programming from DML to resourceKarthi Kandasamy
[Why] mcache allocation programming is not part of DML's core responsibilities. Keeping this logic in DML leads to poor separation of concerns and complicates maintenance. [How] Refactored code to move mcache parameter preparation and mcache ID assignment into the resource file. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-16drm/amd/display: Support external tunneling featureCruise Hung
[Why & How] The original code only supports the tunneling for embedded one. To support external tunneling feature, it needs to check Tunneling_Support bit register. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Refactor SubVP cursor limiting logicDillon Varone
[WHY] There are several gaps that can result in SubVP being enabled with incompatible HW cursor sizes, and unjust restrictions to cursor size due to wrong predictions on future usage of SubVP. [HOW] - remove "prediction" logic in favor of tagging based on previous SubVP usage - block SubVP if current HW cursor settings are incompatible - provide interface for DM to determine if HW cursor should be disabled due to an attempt to enable SubVP Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05Revert "drm/amd/display: Refactor SubVP cursor limiting logic"Ryan Seto
This reverts commit 19e743f0fb73 ("drm/amd/display: Refactor SubVP cursor limiting logic") Reason for revert: Corruption Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Refactor SubVP cursor limiting logicDillon Varone
[WHY] There are several gaps that can result in SubVP being enabled with incompatible HW cursor sizes, and unjust restrictions to cursor size due to wrong predictions on future usage of SubVP [HOW] - remove "prediction" logic in favor of tagging based on previous SubVP usage - block SubVP if current HW cursor settings are incompatible - provide interface for DM to determine if HW cursor should be disabled due to an attempt to enable SubVP Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: DCN42 RMCM and MCM 3DLUT supportYihan Zhu
[WHY & HOW] Providing hardware programming for the RMCM and MCM IPs for 3DLUT in DCN42. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: wait for updates to latch before lockingAusef Yousof
[why&how] It is possible for an update to acquire otg lock and begin programming while the previous update has not completed and its values have not latched. The correct way to go about this is to wait until the vupdate pulses so we can be sure that previous updates have latched and we can continue with the current update pipe programming, otherwise during consecutive full updates we will have corruption flash on the screen. The corruption flash occurs specifically on configs that require odm combine, and its local to a specific pipe (will not flash across whole screen). This ticket is across the otg slave, but it may also appear across master. Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Correct SSC enable detection for DCN351Kevin Gao
[Why] Due to very small clock register delta between DCN35 and DCN351, clock spread is being checked on the wrong register for DCN351, causing the display driver to believe that DPREFCLK downspread to be disabled when in some stacks it is enabled. This causes the clock values for audio to be incorrect. [How] Both DCN351 and DCN35 use the same clk_mgr, so we modify the DCN35 function that checks for SSC enable to read CLK6 instead of CLK5 when using DCN351. This allows us to read for DPREFCLK downspread correctly so the clock can properly compensate when setting values. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Kevin Gao <kevin.gao3@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: removed unused functionJames Flowers
Removed unused function mpc401_get_3dlut_fast_load_status. Signed-off-by: James Flowers <bold.zone2373@fastmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Use meaningful size for block_sequence arrayJoshua Aberback
[Why] This array was initially defined as size 50. There were array overflow issues so the size was increased to 100. To ensure such issues are avoided in the future, the size should be set based on the possible contents instead of an arbitrary value. [How] - upper bound, assume every update occurs on max number of pipes - define array sizes for function parameters, for static analysis Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Use sync version of indirect register access.JinZe.Xu
[Why] Access to indirect registers by DC and other components are not synchronized. [How] Use sync version of indirect register access. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Create a temporary scratch dc_linkAric Cyr
Create a temporary scratch dc_link for programming purposes and fix a copy of pipe_ctx on the stack to a pointer reference. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Change notification of link BW allocationCruise Hung
[WHY & HOW] The response of DP BW allocation is handled in Outbox ISR. When it failed to request the DP BW allocation, it sent another DPCD request in Outbox ISR immediately. The DP AUX reply also uses the Outbox ISR. So, no AUX reply happened in this case. Change to use HPD IRQ for the notification. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: replace dio encoder accessPeichen Huang
[WHY] replace dio encoder access to work with new dio encoder assignment. [HOW} 1. before validation, access dio encoder by get_temp_dio_link_enc() 2. after validation, access dio encoder through pipe_ctx->link_res Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Fix BT2020 YCbCr limited/full range inputIlya Bakoulin
[Why] BT2020 YCbCr input is not handled properly when full range quantization is used and limited range is not supported at all. [How] - Add enums for BT2020 YCbCr limited/full range - Add limited range CSC matrix Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Robert Mader <robert.mader@collabora.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Remove unused link_enc_cfg_get_link_enc_used_by_streamDr. David Alan Gilbert
link_enc_cfg_get_link_enc_used_by_stream() is no longer used after 2021's: commit 6366b00346c0 ("drm/amd/display: Maintain consistent mode of operation during encoder assignment") which introduces and uses the _current version instead. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Move SPL to a new pathSamson Tam
[WHY & HOW] - Move SPL from dc/spl to dc/sspl - Update build files and header paths - Remove dc/spl files Reviewed-by: George Zhang <george.zhang@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: refactor dio link encoder assigningPeichen Huang
[WHY] We would like to have new dio encoder assigning flow. Which should be aligned with hpo assigning and have simple logic and data representation. [HOW} 1. A new config option to enable/disable the new code. 2. Encoder-link mapping is in res_ctx and assigned encoder. is accessed through pipe_ctx. 3. assign dio encoder when add stream to ctx Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Reverse the visual confirm recoutsPeterson Guo
[WHY] When checking if a pipe can disable cursor to prevent duplicate cursors, having visual confirm on will prevent disabling cursors on planes which cover the bottom of the screen. [HOW] When checking if a plane can disable visual confirm, the pipe first reverses these calculations before doing the checks. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Peterson Guo <peterson.guo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Increase block_sequence array sizeJoshua Aberback
[Why] It's possible to generate more than 50 steps in hwss_build_fast_sequence, for example with a 6-pipe asic where all pipes are in one MPC chain. This overflows the block_sequence buffer and corrupts block_sequence_steps, causing a crash. [How] Expand block_sequence to 100 items. A naive upper bound on the possible number of steps for a 6-pipe asic, ignoring the potential for steps to be mutually exclusive, is 91 with current code, therefore 100 is sufficient. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Populate register address for dentist for dcn401Dillon Varone
[WHY&HOW] Address was not previously populated which can result in incorrect clock frequencies being read on boot. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: log destination of vertical interruptJosip Pavic
[Why] Knowing the destination of OTG's vertical interrupt 2 is useful for debugging, but it is not currently included in the OTG state readback logic [How] Read the OTG interrupt destination register to get the vertical interrupt 2 destination on ASICs that have this register when reading back the OTG state from hardware Reviewed-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: Add hubp cache reset when powergatingAric Cyr
[Why] When HUBP is power gated, the SW state can get out of sync with the hardware state causing cursor to not be programmed correctly. [How] Similar to DPP, add a HUBP reset function which is called wherever HUBP is initialized or powergated. This function will clear the cursor position and attribute cache allowing for proper programming when the HUBP is brought back up. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add support to configure CRC window on specific CRC instanceWayne Lin
[Why] Have the need to specify the CRC window on specific CRC engine. dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always resets CRC engine at first. [How] Add index parameter to dc_stream_configure_crc() for selecting the desired crc engine. Additionally, add another parameter to specify whether to skip the default reset of crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: DML2.1 Post-Si CleanupRafal Ostrowski
[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Log Hard Min Clocks and Phantom Pipe StatusSung Lee
[WHY] On entering/exiting idle power, certain parameters would be very useful to know for power profiling purposes. [HOW] This commit adds certain hard min clocks and pipe types to log output on idle optimization enter/exit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Update dc_tiling_info union to structureKarthi Kandasamy
[WHY] The `dc_tiling_info` union previously did not have a field to specify the active GFX format, assuming only one format would be used per DCN version. from DCN4+, support for switching between different GFX formats is introduced, requiring a way to track which format is currently in use. [HOW] Updated the `dc_tiling_info` union to include a new field that explicitly indicates the currently used GFX format. This allows the system to determine the active GFX format and take the correct programming path accordingly. [Description] The union `dc_tiling_info` has been updated to support multiple GFX formats by adding a new field for identifying the active format. This update ensures that the correct programming path is followed based on the selected format. All references to `dc_tiling_info` in the codebase have been updated to reflect the new structure. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: have pretrain for dpiaPeichen Huang
[WHY] We like to have pretrain for dpia link so that dp and dp tunneling have aligned behavior. The Main difficult for dpia pretrain is that encoder can not get corresponded dpia port when link detection in current implementation. [HOW] 1. create enable/disable dpia output functions for dcn35 encoder and have dpia_id and other necessary info as inputs. 2. dcn35 dpia use the new functions to enable/disable output. 3. have a option to enable/disable the change. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Extend dc_stream_get_crc to support 2nd crc engineWayne Lin
[Why & How] Since now we can set multiple crc windows for secure display, add a new input parameter for dc_stream_get_crc to indicate to fetch crc from which crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add DP required HBlank size calc to link interfaceGeorge Shen
[Why] Some features, such as HBlank expansion/reduction, needs to know how much HBlank is required to support basic audio. [How] Add interface to link to calculate required HBlank size for a given link + timing combination to support basic audio (i.e. 2-channel 48KHz). Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Add support for FAMS2+ interface versionsDillon Varone
Current driver interface does not allow for flexibility in coexistence of multiple interface versions, so add support for checking minor interface revisions and providing appropriate programming. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Update FAMS2 config cmdAlvin Lee
The FAMS2 stream and sub-state have been separated into 2 different commands. Update the cmd function to send one command each for the stream and sub-state. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: add clear_tiling mi callbacksAlex Deucher
This adds clear_tiling callbacks to the mi structure that will be used for drm panic support to clear the tiling on a display. Mem input (mi) is used on DCE based display IPs. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
2024-12-18drm/amd/display: add clear_tiling hubp callbacksAlex Deucher
This adds clear_tiling callbacks to the hubp structure that will be used for drm panic support to clear the tiling on a display. hubp3 support from Jocelyn's original patch and the rest from me. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
2024-12-10drm/amd/display: Remove unused dcn_find_dcfclk_suits_allDr. David Alan Gilbert
dcn_find_dcfclk_suits_all() last use was removed by 2018's commit 4fd994c448a3 ("drm/amd/display: Start using the new pp_smu interface") Remove it, and the dcn_find_normalized_clock_vdd_Level helper it used. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Remove unused enable_surface_flip_reportingDr. David Alan Gilbert
enable_surface_flip_reporting() has been unused since it was added by commit 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 19:12:32 +0000