summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/inc
AgeCommit message (Collapse)Author
2022-06-01drm/amd/display: Pass the new context into disable OTG WANicholas Kazlauskas
[Why] When enabling an HPO stream for the first time after having previously enabled a DIO stream there may be lingering DIO FIFO errors even though the DIO is no longer enabled. These can cause display clock change to hang if we don't apply the OTG disable workaround since the ramping logic is tied to OTG on. [How] The workaround wasn't being applied in the sequence of: 1 DIO stream 0 streams 1 HPO stream because current_state has no stream or planes in its context - and it's only swapped after optimize has finished. We should be using the incoming context instead to determine whether this logic is needed or not. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-01drm/amd/display: revert Blank eDP on disable/enable drvLeung, Martin
why and how: Revert this change. It was causing a black screen with certain blocks Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Leung, Martin <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-26Revert "drm/amd/display: Refactor LTTPR cap retrieval"Michael Strauss
This reverts commit 3b90318d44f87a3582f876802253a7748d270385. [WHY] Regressions unintentionally caused by change, reverting until this can be resolved. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-26drm/amd/display: Move FPU associated DCN30 code to DML folderJasdeep Dhillon
[why & how] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN30 to DML, where all FPU code should locate. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-26drm/amd/display: Query DPIA HPD status.Jimmy Kizito
[Why] Driver needs up to date DPIA HPD status. [How] Use HPD query command to get DPIA HPD status. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-25Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-10drm/amd/display: remove redundant CONFIG_DRM_AMD_DC_DCN in dcAlex Hung
[Why & How] CONFIG_DRM_AMD_DC_DCN is used by pass the compilation failures, but DC code should be OS-agnostic. This patch fixes it by removing unnecessasry CONFIG_DRM_AMD_DC_DCN in dc and dc/core directories. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-10drm/amd/display: Refactor LTTPR cap retrievalMichael Strauss
[WHY] Split LTTPR mode selection between platform support and downstream link support Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Add new DSC interface to disconnect from pipeEric Bernstein
[Why & How] Add new DSC interface to disconnect from pipe. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-26drm/amd/display: Fix Wstringop-overflow warnings in dc_link_dp.cGustavo A. R. Silva
Fix the following Wstringop-overflow warnings when building with GCC-11: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:493:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:493:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:493:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:388:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:388:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:388:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:1491:17: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2613:25: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:2613:25: warning: ‘dp_decide_lane_settings’ accessing 4 bytes in a region of size 1 [-Wstringop-overflow=] by removing the over-specified array size from the argument declarations. This helps with the ongoing efforts to globally enable -Wstringop-overflow. Link: https://github.com/KSPP/linux/issues/181 Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2022-04-25drm/amd/display: update dcn315 clk table readDmytro Laktyushkin
Clean up the sequence by making sure clk_mgr always builds a reasonable clock table regardless of what we read from smu by moving all defaults from resource soc struct to clk_mgr. Now the only thing resource soc update does is read the clock table and apply any DC specific policy decisions to how clocks are populated in dml soc. Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-13drm/amd/display: extract update stream allocation to link_hwssWenjing Liu
[why] Extract update stream allocation table into link hwss as part of the link hwss refactor work. Reviewed-by: George Shen <George.Shen@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-12drm/amd/display: Add odm seamless boot supportDuncan Ma
[WHY] Implement changes to transition from Pre-OS odm to Post-OS odm support. Seamless boot case is also considered. [HOW] Revised validation logic when marking for seamless boot. Init resources accordingly when Pre-OS has odm enabled. Reset odm and det size when transitioning Pre-OS odm to Post-OS non-odm to avoid corruption. Apply logic to set odm accordingly upon commit. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Duncan Ma <Duncan.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: Add work around for AUX failure on wake.Jimmy Kizito
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-05drm/amd/display: extract set stream attribute to link_hwssWenjing Liu
[why] Extract set stream attribute into link_hwss as part of the link hwss refactor work. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: detach fpu operations from dcn10_validate_bandwidth in calcsMelissa Wen
dcn10_validate_bandwidth is only used on dcn10 files, but is declared in dcn_calcs files. Rename dcn10_* to dcn_* in calcs, remove DC_FP_* wrapper inside DML folder and create an specific dcn10_validate_bandwidth in dcn10_resources that calls dcn_validate_bandwidth and properly wraps that FPU function with DC_FP_* macro. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Add work around for AUX failure on wake.Jimmy Kizito
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Add support for zstate during extended vblankGabe Teeger
[why] When we enter FREESYNC_STATE_VIDEO, we want to use the extra vblank portion to enter zstate if possible. [how] When we enter freesync, a full update is triggered and the new vtotal with extra lines is passed to dml in a stream update. The time gained from extra vblank lines is calculated in microseconds. We allow zstate entry if the time gained is greater than 5 ms, which is the current policy. Furthermore, an optimized value for min_dst_y_next_start is calculated and written to its register. When exiting freesync, another full update is triggered and default values are restored. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2Charlene Liu
[why] DCN31 has this in zstate save/restore sequence. need for non_zstate supported ASIC [how] add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Wait for hubp read line for PollockBecle Lee
[Why] Underflow occurred while hubp ret pipe read is idle and the second pipe is powered up and added. Flickering and underflow are only observed on Pollock. [How] Check the hubp ret pipe read prior to unlock pipes. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Becle Lee <becle.lee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add pstate verification and recovery for DCN31Nicholas Kazlauskas
[Why] To debug when p-state is being blocked and avoid PMFW hangs when it does occur. [How] Re-use the DCN10 hardware sequencer by adding a new interface for verifying p-state high on the hubbub. The interface is mostly the same as the DCN10 interface, but the bit definitions have changed for the debug bus. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Fix double free during GPU reset on DC streamsNicholas Kazlauskas
[Why] The issue only occurs during the GPU reset code path. We first backup the current state prior to commiting 0 streams internally from DM to DC. This state backup contains valid link encoder assignments. DC will clear the link encoder assignments as part of current state (but not the backup, since it was a copied before the commit) and free the extra stream reference it held. DC requires that the link encoder assignments remain cleared/invalid prior to commiting. Since the backup still has valid assignments we call the interface post reset to clear them. This routine also releases the extra reference that the link encoder interface held - resulting in a double free (and eventually a NULL pointer dereference). [How] We'll have to do a full DC commit anyway after GPU reset because the stream count previously went to 0. We don't need to retain the assignment that we had backed up, so just copy off of the now clean current state assignment after the reset has occcurred with the new link_enc_cfg_copy() interface. Fixes: 6d63fcc2a334 ("drm/amd/display: Reset link encoder assignments for GPU reset") Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: add cable ID support for usb c connectorWenjing Liu
[how] Call to DMUB to retrieve usb c cable ID data from PD firmware. If cable id is retrieved from DMUB, skip reading cable ID from RX. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-14Merge tag 'amd-drm-next-5.18-2022-02-11-1' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.18-2022-02-11-1: amdgpu: - Clean up of power management code - Enable freesync video mode by default - Clean up of RAS code - Improve VRAM access for debug using SDMA - Coding style cleanups - SR-IOV fixes - More display FP reorg - TLB flush fixes for Arcuturus, Vega20 - Misc display fixes - Rework special register access methods for SR-IOV - DP2 fixes - DP tunneling fixes - DSC fixes - More IP discovery cleanups - Misc RAS fixes - Enable both SMU i2c buses where applicable - s2idle improvements - DPCS header cleanup - Add new CAP firmware support for SR-IOV amdkfd: - Misc cleanups - SVM fixes - CRIU support - Clean up MQD manager UAPI: - Add interface to amdgpu CTX ioctl to request a stable power state for profiling https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207 - Add amdkfd support for CRIU https://github.com/checkpoint-restore/criu/pull/1709 - Remove old unused amdkfd debugger interface Was only implemented for Kaveri and was only ever used by an old HSA tool that was never open sourced radeon: - Fix error handling in radeon_driver_open_kms - UVD suspend fix - Misc fixes From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211220706.5803-1-alexander.deucher@amd.com
2022-02-02drm/amd/display: move link_hwss to link folder and break down to filesWenjing Liu
[why] Move link_hwss to its own folder as part of DC LIB and break it down to separate file one for each type of backend for code isolation. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: move get_link_hwss to dc_resourceWenjing Liu
[why] Isolate the way to obtain link_hwss from the actual implemenation of link_hwss. So the caller can call link_hwss without knowing the implementation detail of link_hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: temporarly move non link_hwss code to dc_link_dpWenjing Liu
[why] Clean up dc_link_hwss file in the preparation of breaking it down to file for each encoder type. We temporarly move the original dp link functions in link_hwss back to dc_link_dp. We will break dc_link_dp down after link_hwss is in good shape. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp lane settings to link_hwssWenjing Liu
[why] Factor set dp lane settings to link_hwss. v2: fix statement with no effect warning (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp link test pattern to link_hwssWenjing Liu
[why] Factor set dp link test pattern to link_hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add enable/disable dp link output to link_hwssWenjing Liu
[why] Factor enable/disable dp link output to link hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: refactor destructive verify link cap sequenceWenjing Liu
[how] 1. move decide det link training link resource before each link training. 2. move disable link for handling vbios case into set all streams dpms off for link sequence. 3. extract usbc hotplug workaround into its own wa function. 4. Minor syntax changes to improve code readability. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add setup/reset stream encoder to link_hwssWenjing Liu
[why] Factor setup/reset stream encoder to link hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Support synchronized indirect reg accessRoy Chan
[Why] indirect register index/data pair may be used by multi-threads. when it happens, it would cause register access issue that is hard to trace. [How] Using cgs service, which provide a sync indirect reg access api. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Add Cable ID support for native DPShen, George
[Why/How] We need to handle cable capabilities for cables that support cable ID. The cable attributes are intersected with the verified link caps to determine appropriate max link rate. After determining cable attributes we update the DP receiver. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: add protection in link encoder matching logicMartin Tsai
[Why] Link encoders are created based on its engine ID. The position of a link encoder in an array could be null since it didn't be allocated. Current matching logic didn't consider this situation and could get null encoder. [How] To add null encoder check to make the matching logic can go to next to get a valid one. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Martin Tsai <martin.tsai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: rename dc_link_hwss struct to link_hwssWenjing Liu
[why] This is internal to dc so we don't have to add a prefix to indicate it is dc link_hwss instead someone else link_hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: add more link_hwss types and method to decide which oneWenjing Liu
[why] as we add more link_hwss we are making a generic way to determine which type of link_hwss we should use. Later on we may think of introduce a link policy layer. it could be a thin layer that decide the type of link_hwss we use. So instead of passing in link and link_res we can just pass in link_policy and swtich based on link_policy->get_link_hwss_type. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: abstract encoder related hwseq across different typesWenjing Liu
[why] Current we have hundreds of if/else or switch statement to check encoder type in dc_link level. The reason is because depending on the type of encoder dc_link needs to perform similar programming task but with different encoder interfaces. The story is to abstract these interfaces so dc_link can just perform the programming task without knowing the detail of which encoder it's dealing with. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Drop DCN for DP2.x logicWenjing Liu
[Why & How] DCN guard is not necessary for DP2.x relevant logic. Drop them. v2: squash in fix for misplaced #endif (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: factor out dp detection link training and mst top detectionWenjing Liu
[why] dc_link_detect_helper has multiple purpose: 1. Detect link and local sink. 2. Verify link capability by performing detection link training. 3. Start mst topology discovery and if succeeded fails the current interface. This is difficult to maintain as item 2 has become more destructive to current dc state. The change is to decouple these sequences to its own functions. Eventually only item 2 is a destructive method and we will redesign this sequence with a more unified policy across different encoder types. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Fix for otg synchronization logicMeenakshikumar Somasundaram
[Why] During otg sync trigger, plane states are used to decide whether the otg is already synchronized or not. There are scenarions when otgs are disabled without plane state getting disabled and in such case the otg is excluded from synchronization. [How] Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe. When a otg is disabled/enabled, pipe_idx_syncd is reset to itself. On sync trigger, pipe_idx_syncd is checked to decide whether a otg is already synchronized and the otg is further included or excluded from synchronization. v2: Don't drop is_blanked logic Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: torvalds@linux-foundation.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-16Merge tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "drivers fixes: - i915 fixes for ttm backend + one pm wakelock fix - amdgpu fixes, fairly big pile of small things all over. Note this doesn't yet containe the fixed version of the otg sync patch that blew up - small driver fixes: meson, sun4i, vga16fb probe fix drm core fixes: - cma-buf heap locking - ttm compilation - self refresh helper state check - wrong error message in atomic helpers - mipi-dbi buffer mapping" * tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits) drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy drm: fix error found in some cases after the patch d1af5cd86997 drm/ttm: fix compilation on ARCH=um dma-buf: cma_heap: Fix mutex locking section video: vga16fb: Only probe for EGA and VGA 16 color graphic cards drm/amdkfd: Fix ASIC name typos drm/amdkfd: Fix DQM asserts on Hawaii drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2 drm/amd/pm: only send GmiPwrDnControl msg on master die (v3) drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt drm/amdgpu: not return error on the init_apu_flags drm/amdkfd: Use prange->update_list head for remove_list drm/amdkfd: Use prange->list head for insert_list drm/amdkfd: make SPDX License expression more sound drm/amdkfd: Check for null pointer after calling kmemdup drm/amd/display: invalid parameter check in dmub_hpd_callback Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process" drm/amd/display: reset dcn31 SMU mailbox on failures drm/amdkfd: use default_groups in kobj_type drm/amdgpu: use default_groups in kobj_type ...
2022-01-10Revert "drm/amd/display: Fix for otg synchronization logic"Linus Torvalds
This reverts commit a896f870f8a5f23ec961d16baffd3fda1f8be57c. It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7, subsystem ID 1da2:e353). Bisected right to this commit, and reverting it fixes things. Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/ Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-07drm/amd/display: unhard code link to phy idx mapping in dc link and clean upWenjing Liu
[why] 1. Current code hard codes link to PHY mapping in dc link level per asic per revision. This is not scalable. In long term the mapping will be obatined from DMUB and store in dc resource. 2. Depending on DCN revision and endpoint type, the definition of dio_output_idx dio_output_type and phy_idx are not consistent. We need to unify the meaning of these hardware indices across different system configuration. [how] 1. Temporarly move the hardcoded mapping to dc_resource level, which should have full awareness of asic specific configuration and add a TODO comment to move the mapping to DMUB. 2. populate dio_output_idx/phy_idx for all configuration, define usb4_enabled bit instead of dio_output_type as an external enum. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: get and restore link res mapWenjing Liu
[why] When reboot the link res map should be persisted. So during boot up, driver will look at the map to determine which link should take priority to use certain link res. This is to ensure that link res remains unshuffled after a reboot. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: support dynamic HPO DP link encoder allocationWenjing Liu
[why] When there are more DP2.0 RXs connected than the number HPO DP link encoders we have, we need to dynamically allocate HPO DP link encoder to the port that needs it. [how] Only allocate HPO DP link encoder when it is needed. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: populate link res in both detection and validationWenjing Liu
[why] This commit is to populate link res in preparation of the next commit. The next commit will replace all existing code to use link res instead Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: define link res and make it accessible to all link interfacesWenjing Liu
[why] There will be a series of re-arch changes in Link Resource Management. They are more and more muxable link resource objects and the resource is insufficient for a one to one allocation to all links created. Therefore a link resource sharing logic is required to determine which link should use certain link resource. This commit is the first one in this series that starts by defining a link resource struct, this struct will be available to all interfaces that need to perform link programming sequence. In later commits, we will granduately decouple link resource objects out of dc link. So instead of access a link resource from dc link. Current link's resource can be accessible through pipe_ctx->link_res during commit, or by calling dc_link_get_cur_link_res function with current link passed in after commit. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: implement dc_mode_memclkMartin Leung
why: Need interface to lower clocks when in dc (power save) mode. Must be able to work with p_state unsupported cases Can cause flicker when OS notifies us of dc state change how: added dal3 interface for KMD added pathway to query smu for this softmax added blank before clock change to override underflow added logic to change clk based on pstatesupport and softmax added logic in prepare/optimize_bw to conform while changing clocks Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 21:01:14 +0000