summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/inc
AgeCommit message (Collapse)Author
2022-09-29drm/amd/display: Remove interface for periodic interrupt 1Aric Cyr
[why] Only a single VLINE interrupt is available so interface should not expose the second one which is used by DMU firmware. [how] Remove references to periodic_interrupt1 and VLINE1 from DC interfaces. Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Display distortion after hotplug 5K tiled displayMeenakshikumar Somasundaram
[Why] During hot plug of specific 5K tiled display, sometimes both the tiles are not synchronized resulting in distortion. The reason is that otgs of both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa) is applied for bandwidth optimization. The otg workaround reenables otg but otg synchronization context is not reset and hence dc_trigger_sync() does not resynchronize otg again. [How] Implement reset_sync_context_for_pipe() to reset the otg synchronization context for the disabled pipe and its slave pipes when otg workaround is applied. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: For ODM seamless transition require AUTO modeAlvin Lee
[Why & How] ODM seamless transitions require DIV_MODE_AUTO. However, DIV_MODE_AUTO only works when all the horizontal timing params are divisible by the ODM combine factor. Therefore, disable the ODM 2:1 policy when the horizontal timing params are not divisible by 2. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: rework recent update PHY state commitWenjing Liu
[why] Original change 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Update viewport position for phantom pipesAlvin Lee
[Description] In some cases the viewport position of the main pipes can change without triggering a full update. In this case the subvp phantom viewports must be updated accordingly. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Correct dram channel width for dcn314Duncan Ma
[Why] The interpretation of the number of memory channels differ by memory type, and this affects channel width for the DML input. [How] Set dram channel width according to memory type for dcn314. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Add visual confirm color support for SubVPLeo (Hanghong) Ma
[Why && How] We would like to have visual confirm color support for SubVP. 1. Set visual confirm color to red: SubVP is enable on this display; 2. Set visual confirm color to green: SubVP is enable on other display and DRR is on this display; 3. Set visual confirm color to blue: SubVP is enable on other display and DRR is off on this display; Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: Add interface to track PHY stateAlvin Lee
[Why] Sometimes pixel clock needs to remain active after transmitter disable. [How] Use update_phy_state to track PHY state after stream enable/disable and program pixel clock as needed. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: remove unused headerMagali Lemes
dml_wrapper* files were removed in commit 01b537eeb049 ("drm/amd/display: Remove unused code"), as they are not used anywhere. However, the header file wasn't removed, so remove the header as well. Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: add doc entries for MPC blending configurationMelissa Wen
Describe structs and enums used to set blend mode properties to MPC blocks. Some pieces of information are already available as code comments, and were just formatted. Others were collected and summarised from discussions on AMD issue tracker[1][2]. [1] https://gitlab.freedesktop.org/drm/amd/-/issues/1734 [2] https://gitlab.freedesktop.org/drm/amd/-/issues/1769 v2: - fix typos (Tales) - add MPCC to MPC entry in the glossary Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add basic kernel doc to CRC code under DCRodrigo Siqueira
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-29drm/amd/display: Fix a compilation failure on PowerPC caused by FPU codeRodrigo Siqueira
We got a report from Stephen/Michael that the PowerPC build was failing with the following error: ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o This error happened because of the function optc3_set_vrr_m_const. This function expects a double as a parameter in a code that is not allowed to have FPU operations. After further investigation, it became clear that optc3_set_vrr_m_const was never invoked, so we can safely drop this function and fix the ld issue. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Melissa Wen <mwen@igalia.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add dc_ctx to link_enc_create() parametersAurabindo Pillai
[Why&How] Preparation to enable run time initialization of register offsets to add dc_context to the link_enc_create callback. This is needed to get the dc_ctx handle where register offset initialization routine is called. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Cache cursor when cursor exceeds 64x64Chris Park
[Why] When Static screen from MALL, the cursor needs to be cached if cursor exceeds 64x64 size. [How] Program the bit that cache cursor in MALL when size of the cursor exceeds 64x64. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Fix dpstreamclk programmingMichael Strauss
[WHY] Currently programming incorrect hpo inst as well as selecting incorrect source [HOW] Use hpo inst instead of otg inst to select dpstreamclk inst Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Use correct DTO_SRC_SEL for 128b/132b encodingMichael Strauss
[WHY] DP DTO isn't used for 128b/132b encoding [HOW] Check current link rate to determine whether using 8b/10b or 128/132b encoding Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add enable/disable FIFO callbacks to stream setupNicholas Kazlauskas
[Why] We don't write out attributes after disabling and re-enabling the link on some monitors, causing some, but not all, HDMI displays to fail to lightup on DCN314. [How] Firmware used to do this after DIG link setup. Since firmware is no longer doing this to support USB4 and dynamic link remapping we'll need to add this to driver in the equivalent paths. New optional callbacks were created in the stream encoder interface and implementations were added for DCN314. Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-15Merge tag 'amd-drm-next-5.20-2022-07-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.20-2022-07-14: amdgpu: - DCN3.2 updates - DC SubVP support - DP MST fixes - Audio fixes - DC code cleanup - SMU13 updates - Adjust GART size on newer APUs for S/G display - Soft reset for GFX 11 - Soft reset for SDMA 6 - Add gfxoff status query for vangogh - Improve BO domain pinning - Fix timestamps for cursor only commits - MES fixes - DCN 3.1.4 support - Misc fixes - Misc code cleanup amdkfd: - Simplify GPUVM validation - Unified memory for CWSR save/restore area - fix possible list corruption on queue failure radeon: - Fix bogus power of two warning UAPI: - Unified memory for CWSR save/restore area for KFD Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com
2022-07-13drm/amd/display: Fix lag when moving windowed MPO across display using ODM ↵Samson Tam
2:1 combine [Why] With single display odm 2:1 policy, when moving windowed MPO across the display, we experience a momentary lag when we move between the centre of the display and the right half of the display. This is caused by the MPO pipe being reallocated when it crosses this boundary [How] Handle two cases: 1. if the head pipe has a MPO pipe already allocated in the old context, then use that pipe if it is available in the current context 2. if the head pipe is on the left side, check the right side to see if it has a MPO pipe already allocated. If so, don't use that pipe if it is selected as the idle pipe in the current context Add new function pointer called .acquire_idle_pipe_for_head_pipe that will pass in the head pipe and handle case 1 Add find_idle_secondary_pipe_check_mpo() to handle case 2 if we don't hit case 1. In dc_add_plane_to_context(), start with head pipe and check case 1 and 2 in call acquire_free_pipe_for_head(). If we are on the right side of the display, check case 1 again by passing in right side pipe as the new head in call acquire_free_pipe_for_head(). Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-13drm/amd/display: make enable link independent from verified link capsWenjing Liu
[why] Ideally link capability should be independent from the link configuration that we decide to use in enable link. Otherwise if link capability is changed after validation has completed, we could end up enabling a link configuration with invalid configuration. This would lead to over link bandwidth subscription or in the extreme case causes us to enable HPO link to a DIO stream. [how] Add a new struct in pipe ctx called link config. This structure will contain link configuration to enable a link. It will be populated during map pool resources after we validate link bandwidth. Remove the reference of verified link cap during enable link process and use link config in pipe ctx instead. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-12Merge tag 'amd-drm-next-5.20-2022-07-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.20-2022-07-05: amdgpu: - Various spelling and grammer fixes - Various eDP fixes - Various DMCUB fixes - VCN fixes - GMC 11 fixes - RAS fixes - TMZ support for GC 10.3.7 - GPUVM TLB flush fixes - SMU 13.0.x updates - DCN 3.2 Support - DCN 3.2.1 Support - MES updates - GFX11 modifiers support - USB-C fixes - MMHUB 3.0.1 support - SDMA 6.0 doorbell fixes - Initial devcoredump support - Enable high priority gfx queue on asics which support it - Enable GPU reset for SMU 13.0.4 - OLED display fixes - MPO fixes - DC frame size fixes - ASPM support for PCIE 7.4/7.6 - GPU reset support for SMU 13.0.0 - GFX11 updates - VCN JPEG fix - BACO support for SMU 13.0.7 - VCN instance handling fix - GFX8 GPUVM TLB flush fix - GPU reset rework - VCN 4.0.2 support - GTT size fixes - DP link training fixes - LSDMA 6.0.1 support - Various backlight fixes - Color encoding fixes - Backlight config cleanup - VCN 4.x unified queue cleanup amdkfd: - MMU notifier fixes - Updates for GC 10.3.6 and 10.3.7 - P2P DMA support using dma-buf - Add available memory IOCTL - SDMA 6.0.1 fix - MES fixes - HMM profiler support radeon: - License fix - Backlight config cleanup UAPI: - Add available memory IOCTL to amdkfd Proposed userspace: https://www.mail-archive.com/amd-gfx@lists.freedesktop.org/msg75743.html - HMM profiler support for amdkfd Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080805.html Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220705212633.6037-1-alexander.deucher@amd.com
2022-07-05drm/amd/display: Program ACP related registerAlan Liu
- Setup the shift and mask of HDMI_ACP_SEND register - Program the register in hdmi stream encoder - Also update ACP register in azalia configuration Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: add an option to skip wait for HPD when powering on eDP panelEvgenii Krasnikov
[HOW/WHY] Add an option to skip edp_wait_for_hpd_ready when necessary Reviewed-by: Jayendran Ramani <Jayendran.Ramani@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Maintain consistent mode of operation during encoder assignmentJimmy Kizito
[Why] While applying a state to hardware, there is a transition period where the back-end is reset using the old state; then enabled using the new state. Generally, the link encoder configuration module queries stream-to-encoder assignments in either the new or old state based on a mode variable. During the transition there is a need to query both states, however toggling this mode variable can lead to incorrect programming of encoders. [How] - Add new function to explicity query stream-to-encoder assignment in the current state rather than intermittently switch the mode of operation of the link encoder assignment module. - Add additional checks for encoder assignment defects. - Explicitly reset the mode of operation if application of state to hardware ends prematurely. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Apply ODM 2:1 policy for single display configurationSamson Tam
[Why] Most of the time, a single display uses the ODM combine. When using multi-display, we use ODM combine only if it is necessary. These cases are not flexible enough for us, and we can improve them to take advantage of our hardware. We want to have more control over the ODM policy. [How] This commit add a new debug flag named enable_single_display_2to1_odm_policy to control the ODM policy and another flag named enable_dp_dig_pixel_rate_div_policy to fine control the ODM combine. This is possible by adding a new "pipe.dest" parameter that can be set to ODM 2:1 combined if we use a single display. For dynamic ODM combine, when using DP-DIG, DCN applies K2=2 settings for ODM combine. Note that this feature affects the following registers: - timing.pix_clk_100khz -> DP_VID_M, DP_VID_N - requested_pix_clk_100hz -> DP_DTOn_PHASE - OTGn_PIXEL_RATE_DIVK2 - DP_PIXEL_PER_CYCLE_PROCESSING_MODE - DIG_FIFO_OUTPUT_PIXEL_MODE - DP_VID_N_MUL Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add function to set pixels per cycleEric Bernstein
Add function to set pixels per cycle in DIG stream encoder Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add SubVP required codeAlvin Lee
This commit enables the SubVP feature. To achieve that, we need to: - Don't force p-state disallow on SubVP (can't block dummy p-state) - Send calculated watermark to DMCUB for SubVP - Adjust CAB mode message to PMFW - Add a proper locking sequence for SubVP - Various fixes to SubVP static analysis and determining SubVP config - Currently SubVP not supported with pipe split so merge all pipes before setting up SubVp Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amd/display: Fix __floatunsidf undefined for 32 bit compilationRodrigo Siqueira
When we tried to compile DCN32/321 for 32-bit architecture, we got this error message: ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! This was caused because we were trying to assign an unsigned int to a double value which causes issues for 32-bit architecture. This issue can be fixed by changing the value type. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Randy Dunlap <rdunlap@infradead.org> Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21drm/amd/display: Get VCO frequency from registersRodrigo Siqueira
Add support to get VCO frequency from registers. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21drm/amd/display: extract update stream allocation to link_hwssWenjing Liu
[Why & How] Extract update stream allocation table into link hwss as part of the link hwss refactor work. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Adding VTEM to dcAhmad Othman
[Why] Video Timing Extended Metadata packet (VTEM) is required for features like VRR and FVA [How] Adding support for VTEM transmission to stream encoders in DCN20 and DCN30 as part of FVA support Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Ahmad Othman <ahmad.othman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Firmware assisted MCLK switch and FSFelipe Clark
[WHY] Memory clock switching has great potential for power savings. [HOW] The driver code was modified to notify the DMCUB firmware that it should stretch the vertical blank of frames when a memory clock switch is about to start so that no blackouts happen on the screen due to unavailability of the frame buffer. The driver logic to determine when such firmware assisted strategy can be initiated is also implemented and consists on checking prerequisites of the feature. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Felipe Clark <felipe.clark@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Drop unused privacy_mask setters and gettersOliver Logush
[Why and How] dwbc_funcs.set/get_privacy_mask isn't being used anymore, drop it Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-09Merge tag 'amd-drm-fixes-5.19-2022-06-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.19-2022-06-08: amdgpu: - DCN 3.1 golden settings fix - eDP fixes - DMCUB fixes - GFX11 fixes and cleanups - VCN fix for yellow carp - GMC11 fixes - RAS fixes - GPUVM TLB flush fixes - SMU13 fixes - VCN3 AV1 regression fix - VCN2 JPEG fix - Other misc fixes amdkfd: - MMU notifier fix - Support for more GC 10.3.x families - Pinned BO handling fix - Partial migration bug fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220608203008.6187-1-alexander.deucher@amd.com
2022-06-07drm/amd/display: Add PSR-SU-RC support in DCDavid Zhang
[Why] PSR-SU Rate Control - or PSR-SU-RC - enables PSR-SU panels to work with variable refresh rate to allow for more power savings. Lowering the refresh rate can increase PSR residency by expanding the eDP main link shut down duration. It can also lower panel power consumption. There is a complication with PSR, since the eDP main link can be shut down. Therefore, the timing controller (TCON) on the eDP sink nees to be able to scan out its remote buffer independent of the main link. To allow the eDP source to specify the sink's refresh rate while the link is off, vendor-specific DPCD registers are used. This allows the eDP source to then "Rate Control" the panel during PSR active. [How] Add DC support to communicate with PSR-SU-RC supported eDP sinks. The sink will need to know the desired VTotal during PSR active. This change only adds support to DC, support in amdgpu_dm is still pending to enable this fully. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: Add HDMI member to DTOChris Park
[Why] For Pixel Rate control, when on HDMI, HDMI DTO should be selected instead of DP DTO. [How] Add HDMI member to dtbclk_dto_params, so it can be used tell apart HDMI and DP DTO in the future. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: Fix entry into transient encoder assignment mode.Jimmy Kizito
[Why] In some scenarios it is possible for the encoder assignment module to be set to "transient" mode even though there are no new encoder assignments. This can lead to incorrect results when querying encoder assignment, which in turn can cause incorrect displays to be manipulated. [How] Only allow encoder assignment to be in transient mode of operation when there are valid new encoder assignments. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: add DP sanity checks during enable streamWenjing Liu
[why] 1. When HPD deassertion is pulled in the middle of enabe stream link training, we will abort current training and turn off PHY. This causes current link settings to be zeroed this causes later stream enablement sequence to fail as we prefer to carry on enablement process despite of link training failure for SST. 2. When HPD is toggled after detection before before the enable stream sequence as a result. There could be a race condition where we could end up enable stream based on the previous link even though the link is updated after the HPD toggle. This causes an issue where our link bandwidth is no longer enough to accommodate the timing therefore causes us to oversubscribe MST payload time slots. As discussed we decided to add basic sanity check to make sure that our code can handle the oversubscription failure silently without system hang. [how] 1. Keep PHY powered on when HPD is deasserted during enable stream and wait for the detection sequence to power it off later. 2. Do not allocate payload if the required timeslot for current timing is greater than 64 timeslots. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: update cursor position to DMUB FWDavid Zhang
[why] To involve the cursor position into dirty rectangle calculation. [how] - separate plane and cursor update by different DMUB command - send the cursor information while cursor updating, when updating cursor position/attribute, store cursor pos/attr to hubp, and notify dmub FW to exit psr before program cursor registers Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: program PSR2 DPCD ConfigurationDavid Zhang
[Why] To support PSR2 Source DPCD configuration [How] Update the PSR2 Source DPCD settings while the PSR2 enabled Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add ODM seamless boot supportDuncan Ma
Revised validation logic when marking for seamless boot. Init resources accordingly when Pre-OS has ODM enabled. Reset ODM when transitioning Pre-OS odm to Post-OS non-odm to avoid corruption. Apply logic to set odm accordingly upon commit. Signed-off-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Implement DTBCLK ref switching on dcn32Alvin Lee
[WHY & HOW] Implements DTB ref clock switching with reg key default to OFF. Refactors dccg DTBCLK logic to not store redundant state information dccg. Also removes duplicated functions that should be inherited from other dcn versions. Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add new pixel rate programmingJun Lei
[why] New dividers in DCCG need to be programmed depending on encoder/stream type since pixels per clock in OTG/DIO is different DIO also needs additional programming depending on pixels per clock Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2022-06-03drm/amd/display: Use DTBCLK for valid pixel clockEric Bernstein
Use DTBCLK for valid pixel clock generation Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Fix USBC link creationDillon Varone
[Description] Add USBC connector ID to align with new VBIOS parsing. Add seperate DCN321 link encoder due to different PHY version affecting DP ALT related registers. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add dependant changes for DCN32/321Aurabindo Pillai
[Why&How] This patch adds necessary changes needed in DC files outside DCN32/321 specific tree v2: squash in updates (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add CLKMGR changes for DCN32/321Aurabindo Pillai
Add support for managing DCN3.2.x clocks. v2: squash in smu interface updates (Alex) v3: Drop unused SMU header (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amdgpu/display: Prepare for new interfacesLeung, Martin
why: lut pipeline will be hooked up differently in some asics need to add new interfaces how: add them Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin <martin.leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03Merge tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm updates from Dave Airlie: "This is mostly regular fixes, msm and amdgpu. There is a tegra patch that is bit of prep work for a 5.20 feature to avoid some inter-tree syncs, and a couple of late addition amdgpu uAPI changes but best to get those in early, and the userspace pieces are ready. msm: - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. amdgpu: - Update fdinfo to the common drm format - uapi: - Add VM_NOALLOC GPUVM attribute to prevent buffers for going into the MALL - Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that can be discarded on eviction - Mesa code which uses these: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466 - Link training fixes - DPIA fixes - Misc code cleanups - Aux fixes - Hotplug fixes - More FP clean up - Misc GFX9/10 fixes - Fix a possible memory leak in SMU shutdown - SMU 13 updates - RAS fixes - TMZ fixes - GC 11 updates - SMU 11 metrics fixes - Fix coverage blend mode for overlay plane - Note DDR vs LPDDR memory - Fuzz fix for CS IOCTL - Add new PCI DID amdkfd: - Clean up hive setup - Misc fixes tegra: - add some prelim 5.20 work to avoid inter-tree mess" * tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm: (57 commits) drm/msm/dpu: Move min BW request and full BW disable back to mdss drm/msm/dpu: Fix pointer dereferenced before checking drm/msm/dpu: Remove unused code drm/msm/disp/dpu1: remove superfluous init drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl() gpu: host1x: Add context bus drm/amdgpu: add drm-client-id to fdinfo v2 drm/amdgpu: Convert to common fdinfo format v5 drm/amdgpu: bump minor version number drm/amdgpu: add AMDGPU_VM_NOALLOC v2 drm/amdgpu: add AMDGPU_GEM_CREATE_DISCARDABLE drm/amdgpu: add beige goby PCI ID drm/amd/pm: Return auto perf level, if unsupported drm/amdkfd: fix typo in comment drm/amdgpu/gfx: fix typos in comments drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. drm/amdgpu: differentiate between LP and non-LP DDR memory drm/amdgpu: Resolve pcie_bif RAS recovery bug drm/amdgpu: clean up asd on the ta_firmware_header_v2_0 drm/amdgpu/discovery: validate VCN and SDMA instances ...
2022-06-01drm/amd/display: Wait DMCUB to idle state before reset.hengzhou
[WHY] Very low rate to cause memory access issue while resetting DMCUB after the halt command was sent to it. The process of stopping fw of DMCUB may be timeout, that means it is not in idle state, such as the window frames may still be kept in cache, so reset by force will cause MMHUB hang. [HOW] After the halt command was sent, keep checking the DMCUB state until it is idle. Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: hengzhou <Hengyong.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 04:19:12 +0000