summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h
AgeCommit message (Collapse)Author
2025-07-15drm/amd/display: Initial support for SmartMuxAurabindo Pillai
SmartMux is a mechanism to switch the GPU being used for scanout in a hybrid configuration. This is used for devices with an eDP and two GPUs. This is only valid when the system has a physical switch (Multiplexer) in the board to switch between the two GPUs. When a graphically intensive workload like a game is being run, the system can be switch the active display to the dGPU, so that we can avoid copying the buffer from dGPU to APU for scanout. This helps with latency and FPS. When power consumption is preferred, the system can be switched to the APU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Use meaningful size for block_sequence arrayJoshua Aberback
[Why] This array was initially defined as size 50. There were array overflow issues so the size was increased to 100. To ensure such issues are avoided in the future, the size should be set based on the possible contents instead of an arbitrary value. [How] - upper bound, assume every update occurs on max number of pipes - define array sizes for function parameters, for static analysis Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Do not enable replay when vtotal update is pending.Danny Wang
[Why&How] Vtotal is not applied to HW when handling vsync interrupt. Make sure vtotal is aligned before enable replay. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Danny Wang <danny.wang@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Added visual confirm for DCCLeo Zeng
[WHY] We want to add a visual confirm mode for DCC and MCache for debugging purpose. [HOW] color pipes based on whether DCC is enabled and what MCache id is used. black - DCC disabled red - DCC enabled grey - 2 different MCaches used other colors - 1 MCache used Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Leo Zeng <Leo.Zeng@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add clear DCC and Tiling callback for DCNRodrigo Siqueira
Introduce the DCC and Tiling reset callback to all DCN versions that can call it. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: DML2.1 Post-Si CleanupRafal Ostrowski
[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add VC for VESA Aux Backlight ControlIswara Nagulendran
[WHY] There is no way to distinguish the static backlight control type being used and the VABC support without the use of a debugger or reading DPCD registers. [HOW] Add Visual Confirm support for VESA Aux-based Backlight Control. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Remove unused mmhubbub_warmup fieldDr. David Alan Gilbert
mmhubbub_warmup is a field that was only read by the just removed dc_stream_warmup_writeback() function. Remove the field and it's initialisers. It was only ever initialised to a single function value (dcn30_mmhubbub_warmup) which is called explicitly elsewhere. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Implement new backlight_level_params structureKaitlyn Tse
[Why] Implement the new backlight_level_params structure as part of the VBAC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Modified existing functions to include the new backlight_level_params structure. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Initialize new backlight_level_params structureKaitlyn Tse
[Why] Initialize the new backlight_level_params structure as part of the ABC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Created initial framework of the backlight_level_params struct and modified existing functions to include the new structure. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Fix cursor visual confirm updateIlya Bakoulin
[Why/How] Certain transitions from HW to SW cursor can be missed, which will result in black visual confirm instead of expected blue/red. Need to add handling for cursor visual confirm to dc_update_visual_confirm_color. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Wait for all pending cleared before full updateAlvin Lee
[Description] Before every full update we must wait for all pending updates to be cleared - this is particularly important for minimal transitions because if we don't wait for pending cleared, it will be as if there was no minimal transition at all. In OTG we must read 3 different status registers for pending cleared, one specifically for OTG updates, one specifically for OPTC updates, and the last for surface related updates. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Update HPO I/O When Handling Link Retrain Automation RequestMichael Strauss
[WHY] Previous multi-display HPO fix moved where HPO I/O enable/disable is performed. The codepath now taken to enable/disable HPO I/O is not used for compliance test automation, meaning that if a compliance box being driven at a DP1 rate requests retrain at UHBR, HPO I/O will remain off if it was previously off. [HOW] Explicitly update HPO I/O after allocating encoders for test request. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Perform outstanding programming on full updatesDillon Varone
[WHY] In certain scenarios DC can internally trigger back to back full updates which will miss some required programming that is normally deferred until post update via optimize_bandwidth. [HOW] In back to back update scenarios, wait for pending updates to complete and perform any strictly required outstanding programming. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Remove duplicate HWSS interfacesJoshua Aberback
[Why] Some interface functions are defined in both the public and private HWSS interfaces, which can lead to confusion and runtime issues, therefore the duplicates should be eliminated. [How] - power_down should only be private, because it's only used within HWSS. - update_plane_addr should only be public, as it's used outside HWSS. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Enable DCC on DCN401Aurabindo Pillai
[WHAT] Add registers and entry points to enable DCC on DCN4x Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Keep VBios pixel rate div setting until next mode setyi-lchen
[why] Vbios & Driver have difference pixel rate div policy. When enabling fast boot & performing blank & unblank w/o timing setting, pixel clock & pixel rate dividor are not match. It would cause too high pixel reate and eDP would be black screen. [How] We would keep pixel rate div setting by Vbios until next timing setting. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: yi-lchen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/display: Add 3DLUT DMA load triggerIlya Bakoulin
[Why/How] Need to be able to trigger a DMA load to update 3DLUT contents in MPC. Adding a HWSS function to serve as the trigger. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add misc DC changes for DCN401Aurabindo Pillai
Add miscellaneous changes to enable DCN401 init Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add driver support for future FAMS versionsDillon Varone
[WHY&HOW] Changes to support future versions of FAMS. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Fix compiler warnings on high compiler warning levelsAric Cyr
[why] Enabling higher compiler warning levels results in many issues that can be trivially resolved as well as some potentially critical issues. [how] Fix all compiler warnings found with various compilers and higher warning levels. Primarily, potentially uninitialized variables and unreachable code. Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Remove plane and stream pointers from dc scratchAlvin Lee
[Why&How] Remove several plane and stream pointers from dc for code refactoring. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Remove read/write to external registerSung Joon Kim
[why&how] We need to remove the reference to these registers to prevent any usage in the future. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Support long vblank featureRobin Chen
[WHY] We want to support low hz case, but the original vtotal/vtotal_min/vtotal_max can't support more than 0x7FFF. [HOW] We use the 2 HW reg to contorl long vblank case. 1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop 2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer vcount_stop define from which line we stop using vcount and start using vcount2. vcount_stop_timer define how long we use vcount2. Ex: Vtotal = 7 OTG_V_COUNT_STOP_CONTROL = 4 OTG_V_COUNT_STOP_CONTROL2 = 5 time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 vcount : 0, 1, 2, 3, - - - - - 4, 5, 6 vcount2 : 0, 1, 2, 3, 4, Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Robin Chen<robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Update phantom pipe enable / disable sequenceAlvin Lee
Previously we would call apply_ctx_to_hw to enable and disable phantom pipes. However, apply_ctx_to_hw can potentially update non-phantom pipes as well which is undesired. Instead of calling apply_ctx_to_hw as a whole, call the relevant helpers for each phantom pipe when enabling / disabling which will avoid us modifying hardware state for non-phantom pipes unknowingly. The use case is for an FRL display where FRL_Update is requested by the display. In this case link_state_valid flag is cleared in a passive callback thread and should be handled in the next stream / link update. However, due to the call to apply_ctx_to_hw for the phantom pipes during a flip, the main pipes were modified outside of the desired sequence (driver does not handle link_state_valid = 0 on flips). Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-22drm/amd/display: hook up DCN30 color blocks data to DTN logMelissa Wen
Color caps changed between HW versions, which caused the DCN10 color state sections in the DTN log to no longer match DCN3+ state. Create a color state log specific to DCN3.0 and hook it up to DCN3.0+ and DCN3.1+ drivers. rfc-v2: - detail RAM mode for gamcor and blnd gamma blocks - add MPC gamut remap matrix log v3: - read MPC gamut remap matrix in fixed 31.32 format - extend to DCN3.0+ and DCN3.1+ drivers (Harry) Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-03drm/amd/display: Add more mechanisms for testsRelja Vojvodic
[Why] More information is desired for the test tools. [How] Refactored get_subvp_visual_confirm_color and get_mclk_switch_visual_confirm_color to support the new method of storing the p_state type, which was changed so that it could also be saved and output by the DPM log. Ensured that the p_state type is kept updated by looping through the pipes within commit_planes_for_stream. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Refactor phantom resource allocationDillon Varone
[WHY?] Phantom streams and planes were previously not referenced explcitly on creation. [HOW?] To reduce memory management complexity, add an additional phantom streams and planes reference into dc_state, and move mall_stream_config to stream_status inside the state to make it safe to modify in shallow copies. Also consildates any logic that is affected by this change to dc_state. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: fix HW block PG sequenceCharlene Liu
[why] Power up and power down has reverted programming order. also make sure disable root clock last. Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-09drm/amd/display: Refactor HWSS into component folderMounika Adhuri
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 06:04:02 +0000