summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/hwss/dcn314
AgeCommit message (Collapse)Author
2025-04-07drm/amd/display: Skip to enable dsc if it has been offPaul Hsieh
[Why] It makes DSC enable when we commit the stream which need keep power off.And then it will skip to disable DSC if pipe reset at this situation as power has been off. It may cause the DSC unexpected enable on the pipe with the next new stream which doesn't support DSC. [HOW] Check the DSC used on current pipe status when update stream. Skip to enable if it has been off. The operation enable DSC should happen when set power on. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add clear DCC and Tiling callback for DCNRodrigo Siqueira
Introduce the DCC and Tiling reset callback to all DCN versions that can call it. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Disable MPC rate control on ODM pipe updateGeorge Shen
[Why] Seamless boot skips MPC init for the active pipe, resulting in stale MPC rate control state being retained. This will cause issues since other logic assumes it is disabled (as DCN30 and newer does not need it). [How] Disable MPC rate control on ODM pipe update to cover the seamless boot case. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Fix brightness adjustment on MiniLEDHarry VanZyllDeJong
[Why] Older Asics were changed to target new DCN while still needing older support causing brightness adjustments to fail. [How] Reverted the DCN targets on required DCNs Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Remove unused mmhubbub_warmup fieldDr. David Alan Gilbert
mmhubbub_warmup is a field that was only read by the just removed dc_stream_warmup_writeback() function. Remove the field and it's initialisers. It was only ever initialised to a single function value (dcn30_mmhubbub_warmup) which is called explicitly elsewhere. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Implement new backlight_level_params structureKaitlyn Tse
[Why] Implement the new backlight_level_params structure as part of the VBAC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Modified existing functions to include the new backlight_level_params structure. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Fix garbage or black screen when resetting otgZhongwei
[Why] For some EDP to MIPI panel, disabling OTG when link is alive like boot case, the converter might output garbage or show no display because our GPU is not sending required pixel data. Alos Dig fifo underflow was found which might cause garbage, when resetting otg for other types of EDP panels. [How] Skipping resetting OTG if the dig fifo is on. Make sure that the otg for the pipe is the one that the dig fifo is selecting via the FE mask. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: skip disable CRTC in seemless bootup caseFudongwang
Resync FIFO is a workaround to write the same value to DENTIST_DISPCLK_CNTL register after programming OTG_PIXEL_RATE_DIV register, in case seemless boot, there is no OTG_PIXEL_RATE_DIV register update, so skip CRTC disable when resync FIFO to avoid random FIFO error and garbage. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-26drm/amd/display: fix typos in several function pointer checksVitaliy Shevtsov
Fix several copypaste mistakes in *_disable_link_output() functions where an improper function pointer is checked before dereference. Found by Linux Verification Center (linuxtesting.org) with Svace. Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Update HPO I/O When Handling Link Retrain Automation RequestMichael Strauss
[WHY] Previous multi-display HPO fix moved where HPO I/O enable/disable is performed. The codepath now taken to enable/disable HPO I/O is not used for compliance test automation, meaning that if a compliance box being driven at a DP1 rate requests retrain at UHBR, HPO I/O will remain off if it was previously off. [HOW] Explicitly update HPO I/O after allocating encoders for test request. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Remove duplicate HWSS interfacesJoshua Aberback
[Why] Some interface functions are defined in both the public and private HWSS interfaces, which can lead to confusion and runtime issues, therefore the duplicates should be eliminated. [How] - power_down should only be private, because it's only used within HWSS. - update_plane_addr should only be public, as it's used outside HWSS. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: When resync fifo ensure to use correct pipe ctxAlvin Lee
We resync the FIFO after each pipe update in apply_ctx_to_hw. However, this means that some pipes (in hardware) are based on the new context and some are based on the current_state (since the pipes are updated on at a time). In this case we must ensure to use the pipe_ctx that's currently still configured in hardware when turning off / on OTG's and reconfiguring ODM during the resync. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/display: Make sure to reprogram ODM when resync fifoAlvin Lee
Need to reconfigure ODM when resyncing FIFO because on OTG disable we clear all ODM programming Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Keep VBios pixel rate div setting until next mode setyi-lchen
[why] Vbios & Driver have difference pixel rate div policy. When enabling fast boot & performing blank & unblank w/o timing setting, pixel clock & pixel rate dividor are not match. It would cause too high pixel reate and eDP would be black screen. [How] We would keep pixel rate div setting by Vbios until next timing setting. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: yi-lchen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe splitWenjing Liu
[WHY] Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM pipesplit is used, pixels on the left edge of ODM slices need one extra pixel from the right edge of the previous slice to calculate the correct chroma value. Without this change, the chroma value is slightly different than expected. This is usually imperceptible visually, but it impacts test pattern CRCs for compliance test automation. [HOW] Update logic to use the register for adding extra left edge pixel for YCbCr422/420 ODM cases. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: Refactor input mode programming for DIG FIFODillon Varone
[WHY] Input mode for the DIG FIFO should be programmed as part of stream encoder setup. [HOW] Pre-calculate the pixels per cycle as part of the pixel clock params, and program as part of stream encoder setup. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: use even ODM slice width for two pixels per containerWenjing Liu
[why] When optc uses two pixel per container, each ODM slice width must be an even number. [how] If ODM slice width is odd number increase it by 1. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Revert "dc: Keep VBios pixel rate div setting util next ↵Webb Chen
mode set" This reverts commit 4d4d3ff16db2 ("drm/amd/display: Keep VBios pixel rate div setting util next mode set") which causes issue. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Webb Chen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add log_color_state callback to multiple DCNsRodrigo Siqueira
Set up to enable log color state for multiple DCNs. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Keep VBios pixel rate div setting util next mode setWebb Chen
[why] VBios & Driver may have differnet pixel rate div policy. If the policy is not same and fast boot is enabled, it would cause the pixel rate is too high after driver only performs stream blank & unblank. [how] We would keep pixel rate div setting by VBios until next mode set. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Webb Chen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Fix uninitialized variables in DCAlex Hung
This fixes 29 UNINIT issues reported by Coverity. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Remove MPC rate control logic from DCN30 and aboveGeorge Shen
[Why] MPC flow rate control is not needed for DCN30 and above. Current logic that uses it can result in underflow for certain edge cases (such as DSC N422 + ODM combine + 422 left edge pixel). [How] Remove MPC flow rate control logic and programming for DCN30 and above. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Fix static screen event mask definition changeYiling Chen
[why] The static screen event mask definition is different betwnn DCN31 after and before. [how] Rename DCN30_set_static_screen_control to DCN31. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-03drm/amd/display: Refactor INIT into component folderRevalla
[why] Move all init files to hwss folder. [how] moved the dcnxx_init.c and .h files into inside the hwss and cleared the linkage errors. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Revalla <hrevalla@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-09drm/amd/display: Refactor HWSS into component folderMounika Adhuri
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 18:06:40 +0000