summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
AgeCommit message (Collapse)Author
2023-11-17drm/amd/display: Refactor resource into component directoryMounika Adhuri
[WHY] Move all resource files to unique folder resource. [HOW] Created resource folder in dc, moved the dcnxx_resource.c and dcnxx_resource.h files into corresponding new folders inside the resource and made appropriate changes for compilation in Makefiles. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-26drm/amd/display: Disable SYMCLK32_SE RCO on DCN314Michael Strauss
[WHY] Currently causes some DP link layer failures, backing out until the failures are root caused. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-26drm/amd/display: Set the DML2 attribute to false in all DCNs older than ↵Rodrigo Siqueira
version 3.5 When DML2 was introduced, it targeted only new DCN versions. For controlling which ASIC should use this new version of DML, it was introduced the using_dml2 attribute. To avoid ambiguities, this commit explicitly sets using_dml2 to false in all ASICs that do not support DML2. Cc: Vitaly Prosyak <vprosyak@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-09drm/amd/display: Refactor HWSS into component folderMounika Adhuri
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-09drm/amd/display: Modify Vmin default valueMax Tseng
Fine tune the Vmin clock value Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: augment display clock in dc_cap structureMax Tseng
[Why] Allow dc report maximum display clock possible at vmin Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: switch DC over to the new DRM logging macrosHamza Mahfooz
For multi-GPU systems it is difficult to tell which GPU a particular message is being printed for and that is undesirable because it complicates debugging efforts. Also, the new macros allow us to enable logging for particular parts of the codebase more selectively (since we no longer need to throw everything at DRM_DEBUG_KMS()). So, for the reasons outlined above we should switch to the new macros. We can accomplish this by using the existing DC_LOGGER code to pass around the relevant `struct drm_device` which will be fed to the new macros in logger_types.h. Also, we must get rid of all instances of the DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use the DC logger there and we can simply refer to the macros directly there instead. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add more pipe resource interfacesWenjing Liu
Redesign pipe resource interfaces in resource.h file. The new interface design addresses the issue with lack of pipe topology encapsulation and lack of pipe accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DPIA Link Encoder Assignment FixMustapha Ghaddar
For DPIA we should have preferred DIG assignment based on DPIA selected as per the ASIC design. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: avoid crash and add z8_marks related in dmlCharlene Liu
[why] add dml1 used calculate_wm_and_dlg function pointer check to prevent crash. add z8 watermarks to struct for later asic use Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Enable 8k60hz mode on single displayNicholas Susanto
[Why] 8k60hz compliace test failing because we restrict it single memory channels. Workaround by not restricting it on single displays. [How] Adding an additional check to DCN314 to restrict 8k60hz mode if it has more than 1 display connected. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: rename acquire_idle_pipe_for_layer to ↵Wenjing Liu
acquire_free_pipe_as_sec_dpp_pipe [why] Secondary DPP pipes are used for rendering secondary layers of planes. The name "for layer" doesn't make it obvious. The function is acquiring a free pipe as secondary dpp pipe only. We rename it so it is more obvious. In a future follow up change, we want to add functions to acquire free pipe as opp head pipe or otg master pipe as well. They will have their separate allocation priority. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Add Functions to enable Freesync Panel ReplayBhawanpreet Lakha
Add various functions for replay, such as construct, destroy, enable get_state, and copy_setting etc. These functions communicate with the firmware to setup and enable panel replay Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Add structs for Freesync Panel ReplayBhawanpreet Lakha
In some instances, the GPU is transmitting repeated frame to the sink without any updates or changes in the content. These repeat transmission are wasteful, resulting in power draw in different aspects of the system 1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic prevents power down of parts of this HW path. 2. GPU is transmitting pixel data to the display through the main link of the DisplayPort interface. This prevents power down of both the Source transmitter (TX) and the Sink receiver (RX)  The concepts of utilizing replay is similar to PSR, but there is a benefit of: Source and Sink remaining synchronized which allows for - lower latency when switching from replay to live frames - enable the possibility of more use cases - easy control of the sink's refresh rate during replay Due to Source and Sink remaining timing synchronized, Replay can be activated in more UI scenarios. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Reenable all root clock gating optionsDaniel Miess
[Why & How] Re-enable all RCO options now that all known issues with RCO have been addressed Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: disable RCO for DCN314Daniel Miess
[Why] RCO is causing error messages on some DCN314 systems [How] Force disable RCO for DCN314 Fixes: 17fbdbda9cc8 ("drm/amd/display: Enable dcn314 DPP RCO") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: disable power gating for DCN314Daniel Miess
[Why] Power gating is causing error messages on some DCN314 systems [How] Force disable power gating for DCN314 Fixes: 4cc1cebe08bf ("drm/amd/display: Re-enable DPP/HUBP Power Gating") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Re-enable DPP/HUBP Power GatingDaniel Miess
[Why & How] Bugs preventing DPP/HUBP power gating have been addressed so this should be reenabled on dcn314 for sufficient hardware rev versions Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Enable dcn314 DPP RCODaniel Miess
[Why and How] Add back debug bits enabling RCO for dcn314 as underflow associated with this change has been resolved Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Drop unused DCN_BASE variable in dcn314_resource.cSrinivasan Shanmugam
Fixes the following W=1 kernel build warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_resource.c:128:29: warning: ‘DCN_BASE’ defined but not used [-Wunused-const-variable=] 128 | static const struct IP_BASE DCN_BASE = { { { { 0x00000012, 0x000000C0, 0x000034C0, 0x00009000, 0x02403C00, 0, 0, 0 } }, | ^~~~~~~~ Suggested-by: Roman Li <Roman.Li@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: remove unused definitionYang Li
Eliminate the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_resource.c:1390:43: warning: unused variable 'res_create_maximus_funcs' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296 Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Lowering min Z8 residency timeLeo Chen
[Why & How] Per HW team request, we're lowering the minimum Z8 residency time to 2000us. This enables Z8 support for additional modes we were previously blocking like 2k>60hz Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: limit timing for single dimm memoryDaniel Miess
[Why] 1. It could hit bandwidth limitdation under single dimm memory when connecting 8K external monitor. 2. IsSupportedVidPn got validation failed with 2K240Hz eDP + 8K24Hz external monitor. 3. It's better to filter out such combination in EnumVidPnCofuncModality 4. For short term, filter out in dc bandwidth validation. [How] Force 2K@240Hz+8K@24Hz timing validation false in dc. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: remove legacy fields of dc_plane_cap structDavid Tadokoro
The fields blends_with_above and blends_with_below of struct dc_plane_cap (defined in dc/dc.h) are boolean and set to true by default. All instances of a dc_plane_cap maintain the default values of both. Also, there is only one if statement that checks those fields and there would be the same effect if it was deleted (assuming that those fields are always going to be true). For this reason, considering both fields as legacy ones, this commit removes them and the aforementioned if statement. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Update minimum stutter residency for DCN314 Z8Nicholas Kazlauskas
[Why] Block periods that are too short as they have the potential to currently cause hangs in other firmware components on the system. [How] Update the threshold, mostly targeting a block of 4k and downscaling. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Add minimum Z8 residency debug optionNicholas Kazlauskas
[Why] Allows finer control and tuning for debug and profiling. [How] Add the debug option into DC. The default remains the same as before for now. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-15drm/amd/display: Disable HUBP/DPP PG on DCN314 for nowNicholas Kazlauskas
[Why] The DMCUB implementation required to workaround corruption is not currently stable and may cause intermittent corruption or hangs. [How] Disable PG until the sequence is stable. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Remove stutter only configurationsNasir Osman
[why] Newer ASICs such as DCN314 needs to allow for both self refresh and mem clk switching rather than just self refresh only. Otherwise, we can see some p-state hangs on ASICs that do support mem clk switching. [how] Added an allow_self_refresh_only flag for dcn30_internal_validate_bw and created a validate_bw method for DCN314 with the allow_self_refresh_only flag set to false (to support mem clk switching). Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nasir Osman <nasir.osman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Enable P-state validation checks for DCN314Nicholas Kazlauskas
[Why] To align with DCN31 behavior. This helps avoid p-state hangs in the case where underflow does occur. [How] Flip the bit to true. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Adjust downscaling limits for dcn314Daniel Miess
[Why] Lower max_downscale_ratio and ARGB888 downscale factor to prevent cases where underflow may occur on dcn314 [How] Set max_downscale_ratio to 400 and ARGB downscale factor to 250 for dcn314 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-06drm/amd/display: Add debug option to skip PSR CRTC disableNicholas Kazlauskas
[Why] It's currently tied to Z10 support, and is required for Z10, but we can still support Z10 display off without PSR. We currently need to skip the PSR CRTC disable to prevent stuttering and underflow from occuring during PSR-SU. [How] Add a debug option to allow specifying this separately. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: rework macros for DWB register accessAurabindo Pillai
[Why] A hack was used to access DWB register due to difference in the register naming convention which was not compatible with existing SR/SRI* macros. The additional macro needed were added to dwb ip specific header file (dcnxx_dwb.h) instead of soc resource file (dcnxx_resource.c). Due to this pattern, BASE macro had to be redefined in dcnxx_dwb.h, which in turn needed us to undefine them in the resource file. [How] Add a separate macro for DWB access to the resource files that need it instead of defining them in DWB ip header file. This will enable us to reuse the BASE macro defined in the resource file. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Add a debug option HBR2CP2520 over TPS4Leo Chen
[Why & How] There are cases when we may need to override the hardcoded TPS4 test pattern. Added parameters and config option to be able to allow this. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Update DSC capabilitie for DCN314Leo Chen
dcn314 has 4 DSC - conflicted hardware document updated and confirmed. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Refactor eDP PSR codesIan Chen
We split out PSR config from "global" to "per-panel" config settings. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Update PMFW z-state interface for DCN314Nicholas Kazlauskas
[Why] Request from PMFW to change the messaging format to specify whether we support z-state via individual bits. [How] Update the args we pass in the support message. Fixes: d5c6909e7460 ("drm/amd/display: Add DCN314 clock manager") Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0
2022-10-06drm/amd/display: Refactor edp ILR caps codesIan Chen
We split out ILR config from "global" to "per-panel" config settings. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: correct num_dsc based on HW capCharlene Liu
[why] num_dsc is 3 for dcn314 based on HW capablity. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINEDaniel Miess
[Why] DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE shift and mask being missing [How] Add in shift and mask for ICH_RESET_AT_END_OF_LINE Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Missing HPO instance addedLeo Chen
[Why & How] Number of encoder is set to 4 but only 3 instances are created. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Cleanup PSR flagGabe Teeger
[Why] enable_sw_cntl_psr flag is not needed. For PSR1 and PSR2, we should be passing dirty rectangle and cursor updates to FW regardless of enable_sw_cntl_psr flag. [How] Remove enable_sw_cntl_psr flag from driver. Send cursor info and dirty rectagle status to dmub only in the case of dcn31 and above. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd: remove possible condition with no effect (if == else)Bernard Zhao
This patch fix cocci warning: drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c:1816:6-8: WARNING: possible condition with no effect (if == else). Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd: fix potential memory leakBernard Zhao
This patch fix potential memory leak (clk_src) when function run into last return NULL. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd: fix potential memory leakBernard Zhao
This patch fix potential memory leak (clk_src) when function run into last return NULL. s/free/kfree/ - Alex Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-22drm/amd/display: enable PCON support for dcn314Roman Li
[Why] DCN314 supports PCON. [How] Explicitly enable it in dcn314 resources. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Fix VPG instancing for dcn314 HPODuncan Ma
[Why] An issue during VPG indexing offset generation causing to use the incorrect VPG. HW team placed VPG instances 5 at end of list, making it VPG 9 in register headers. [How] Correct VPG instance for HPO encoders. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Move populate dml pipes from DCN314 to dmlRodrigo Siqueira
The function responsible for populating DML pipes has some FPU operations, and for this reason, it must be moved to the dml folder. This commit moves such function from resource to the fpu file under the dml folder. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Create FPU files for DCN314Rodrigo Siqueira
DCN314 has multiple references to FPU operations inside the resource files, and we need to move those codes to the DML folder. This commit creates the dcn314_fpu files and moves the bounding box operation to this file. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add dc_ctx to link_enc_create() parametersAurabindo Pillai
[Why&How] Preparation to enable run time initialization of register offsets to add dc_context to the link_enc_create callback. This is needed to get the dc_ctx handle where register offset initialization routine is called. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 14:17:40 +0000