summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
AgeCommit message (Collapse)Author
2023-10-09drm/amd/display: Refactor HWSS into component folderMounika Adhuri
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-03drm/amd/display: Add writeback enable/disable in dcAlex Hung
[WHAT] The enable and disable writeback calls need to be included in the coressponding functions in dc_stream. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: set stream gamut remap matrix to MPC for DCN3+Melissa Wen
dc->caps.color.mpc.gamut_remap says there is a post-blending color block for gamut remap matrix for DCN3 HW family and newer versions. However, those drivers still follow DCN10 programming that remap stream gamut_remap_matrix to DPP (pre-blending). To enable pre-blending and post-blending gamut_remap matrix supports at the same time, set stream gamut_remap to MPC and plane gamut_remap to DPP for DCN families that support both. It was tested using IGT KMS color tests for DRM CRTC CTM property and it preserves test results. Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: fix static screen detection settingSungHuai Wang
[WHY] OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3, but we still follow DCN2 to apply setting for OTG_STATIC_SCREEN_EVENT_MASK. [How] Add new function to apply correct settings for DCN3 series. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: SungHuai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: enable low power mode for VGA memoryAurabindo Pillai
[Why] When unused, all memory blocks should be put in a low power state [How] Check the value of enable_mem_low_power.bits.vga and set corresponding bit in the hardware register Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-07drm/amd/display: Do not set drr on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Fixes: 613a7956deb3 ("drm/amd/display: Add monitor specific edid quirk") Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Fix the delta clamping for shaper LUTHarry Wentland
The shaper LUT requires a 10-bit value of the delta between segments. We were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we want it to do. It will preserve 10-bit precision after the decimal point, but that's not quite what we want. We want 14-bit precision and discard the 4 most-significant bytes. To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-19Backmerge tag 'v6.4-rc7' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Linux 6.4-rc7 Need this to pull in the msm work. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-06-15Merge tag 'amd-drm-next-6.5-2023-06-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
2023-06-09Revert "drm/amd/display: Do not set drr on pipe commit"Michel Dänzer
This reverts commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amd/display: Block optimize on consecutive FAMS enables"Michel Dänzer
This reverts commit 751e17147953bc30036b8fe0eaaf780b6951404c. It depends on its parent commit, which we want to revert. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> [Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()] Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-31Revert "drm/amd/display: Do not set drr on pipe commit"Michel Dänzer
This reverts commit 474f01015ffdb74e01c2eb3584a2822c64e7b2be. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-31Revert "drm/amd/display: Block optimize on consecutive FAMS enables"Michel Dänzer
This reverts commit ce560ac40272a5c8b5b68a9d63a75edd9e66aed2. It depends on its parent commit, which we want to revert. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> [Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()] Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Do not set drr on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: refactor dmub commands into single functionJosip Pavic
[Why & How] Consolidate dmub access to a single interface. This makes it easier to add code in the future that needs to run every time a dmub command is requested (e.g. instrumentation, locking etc). Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Do not set drr on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-03Merge tag 'amd-drm-next-6.4-2023-03-31' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.4-2023-03-31: amdgpu: - Misc code cleanups - S4 fixes - MES fixes - SR-IOV fixes - Link DC backlight to connector device rather than PCI device - W=1 fixes - ASPM quirk - RAS fixes - DC dynamic split fixes and enablement for remaining chips - Navi1x SMU fix - Initial NBIO 7.9 support - Initial GC 9.4.3 support - Initial GFXHUB 1.2 support - Initial MMHUB 1.8 support - DCN 3.1.5 fixes - Initial DC FAMs infrastructure - Add support for 6.75Gbps link rates - Add sysfs nodes for secondary VCN clocks amdkfd: - Initial support for GC 9.4.3 radeon: - Convert to client-based fbdev emulation Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331221955.7896-1-alexander.deucher@amd.com
2023-03-31drm/amd/display: fixed dcn30+ underflow issueAyush Gupta
[Why] Observing underflow on dcn30+ system config at 4k144hz [How] We set the UCLK hardmax on AC/DC switch if softmax is enabled and also on boot. While booting up the UCLK Hardmax is set to softmax before the init sequence and the init sequence resets the hardmax to UCLK max which enables P-state switching. Just added a conditional check to avoid setting hardmax on init. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta <ayugupta@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-29Merge v6.3-rc4 into drm-nextDaniel Vetter
I just landed the fence deadline PR from Rob that a bunch of drivers want/need to apply driver-specific patches. Backmerge -rc4 so that they don't have to be stuck on -rc2 for no reason at all. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-03-20Merge tag 'amd-drm-next-6.4-2023-03-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.4-2023-03-17: amdgpu: - Misc code cleanups - Documentation fixes - Make kobj structures const - Add thermal throttling adjustments for supported APUs - UMC RAS fixes - Display reset fixes - DCN 3.2 fixes - Freesync fixes - DC code reorg - Generalize dmabuf import to work with KFD - DC DML fixes - SRIOV fixes - UVD code cleanups - IH 4.4.2 updates - HDP 4.4.2 updates - SDMA 4.4.2 updates - PSP 13.0.6 updates - Add capped/uncapped workload handling for supported APUs - DCN 3.1.4 updates - Re-org DC Kconfig - USB4 fixes - Reorg DC plane and stream handling - Register vga_switcheroo for apple-gmux - SMU 13.0.6 updates - Fix error checking in read_mm_registers functions for affected families - VCN 4.0.4 fix - Drop redundant pci_enable_pcie_error_reporting() call - RDNA2 SMU OD suspend/resume fix - Expose additional memory stats via fdinfo - RAS fixes - Misc display fixes - DP MST fixes - IOMMU regression fix for KFD amdkfd: - Make kobj structures const - Support for exporting buffers via dmabuf - Multi-VMA page migration fixes - NBIO fixes - Misc code cleanups - Fix possible double free - Fix possible UAF radeon: - iMac fix UAPI: - KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support. Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230317164416.138340-1-alexander.deucher@amd.com
2023-03-15drm/amd/display: Do not set DRR on pipe CommitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Do not set DRR on pipe CommitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: convert link.h functions to function pointer styleWenjing Liu
[Why & How] All dc subcomponents should call another dc component via function pointers stored in a component structure. This is part of dc coding convention since the beginning. The reason behind this is to improve encapsulation and polymorphism. The function contract is extracted into a single link service structure defined in link.h header file and implemented only in link_factory.c instead of spreading across multiple files in link component file structure. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-01Revert "drm/amd/display: Do not set DRR on pipe commit"Aric Cyr
This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff. [Why & How] Original change causes a regression. Revert until fix is available. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: merge dc_link.h into dc.h and dc_types.hWenjing Liu
[why] Remove the need to include dc_link.h separately. dc.h should contain everything needed on DM side. [How] Merge dc_link.h into dc.h and dc_types.h so DM only needs to include dc.h to use all link public functions. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: dcn32/321 dsc_pg_control not executed properlyHersen Wu
[why] during boot up or resume from s3, hw default value of domain_power_forceon is 1. when program domain_power_gate to 1 to power down hw block, hw will not change to power off due to domain_power_forceon = 1. [how] enable_power_gating_plane(true) should be executed to set domain_power_forceon to 0 before dsc_pg_control. dsc_pg_control is already called by dcn3x_init_hw--> init_pipes--> dsc_pg_control. no need be programmed with dcn3x_init_hw one more time. to trigger dchub, dsc block power state change, need program dc_ip_request_cntl to notify hw block. Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28Revert "drm/amd/display: Do not set DRR on pipe commit"Aric Cyr
This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff. [Why & How] Original change causes a regression. Revert until fix is available. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-23drm/amd/display: Remove unused local variablesArthur Grillo
Remove local variables that were just set but were never used. This decrease the number of -Wunused-but-set-variable warnings. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-15drm/amd/display: clean code-style issues in dcn30_set_mpc_shaper_3dlutMelissa Wen
This function has many conditions and all code style issues (identation, missing braces, etc.) make reading it really annoying. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: break down dc_link.cWenjing Liu
[why] dc_link contains over 30k line of code, the decision is to break it down to files residing in link folder based on functionality. This change is the last break down change which will remove dc_link.c file after everything is broken down. [how] Move remaining dc_link.c functions into link_detection, link_dpms, link_validation, link_resource, and link_fpga and remove dc_link. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: Do not set DRR on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Defer all DPP adjustment requests till optimized_required is false. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: merge dc_link_dp into dc_linkWenjing Liu
[why] Temporarly merge dc_link_dp functions into dc_link for the purpose of removing dc_link_dp files. This is a transitional change for later commits where we will further refactor dc_link file. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: Enable AdaptiveSync in DC interfaceSung Joon Kim
[why] Start enabling AdaptiveSync feature on Linux environment. [how] Adding AdaptiveSync support in DC layer - building AdaptiveSync info_packets - adjusting the v_startup parameter Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: move dpcd logic from dc_link_dpcd to link_dpcdWenjing Liu
[why] Moving dpcd logic from dc_link_dpcd to link_dpcd as part of link file restructure Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: do not compare integers of different widthsJosip Pavic
[Why & How] Increase width of some variables to avoid comparing integers of different widths Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Disable SubVP on driver disableAlvin Lee
[Why and How] - For driver disable cases in current implementation, if P-State is unsupported or still supported by firmware, we force it supported by DCN. - SubVP now needs to be included in this case along with FPO. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add basic infrastructure for enabling FAMSRodrigo Siqueira
We want to enable Firmware Assisted Memory (FAMS) Switching, but first, we need to add the required code infrastructure in DC before allowing it in amdgpu_dm. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Firmware assisted MCLK switch and FSFelipe Clark
[WHY] Memory clock switching has great potential for power savings. [HOW] The driver code was modified to notify the DMCUB firmware that it should stretch the vertical blank of frames when a memory clock switch is about to start so that no blackouts happen on the screen due to unavailability of the frame buffer. The driver logic to determine when such firmware assisted strategy can be initiated is also implemented and consists on checking prerequisites of the feature. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Felipe Clark <felipe.clark@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: update disp pattern generator routine for DCN30Aurabindo Pillai
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-12drm/amd/display: add DCN30 support FEC initJingwen Zhu
[Why] FEC init used on DCN30. [How] Check fec active when HW init. Co-authored-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Enable power gating before init_pipesRoman Li
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Remove unnecessary function definitionAric Cyr
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-18drm/amd/display: Fix black screen issue on memory clock switch enFelipe Clark
[WHY] With some monitors when multi plane overlay is enabled the memory clock switching mechanism has to change and, due to an error in the initialization sequence, it may cause a black screen. [HOW] Change the firmware assisted memory clock switch initialization and tear-down sequence utilizing the prepare_bandwidth and optimize_bandwidth contexts. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Felipe Clark <feclark@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-18drm/amd/display: Disabled seamless boots on DP and renamed ↵Jarif Aftab
power_down_display_on_boot [WHY] - We only ever want seamless boots on eDPs - The naming and logic did not match the context [HOW] - Removed unnecessary if statements - Renamed power_down_display_on_boot to seamless_boot_edp_requested and swapped the logic Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jarif Aftab <jaraftab@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: implement dc_mode_memclkMartin Leung
why: Need interface to lower clocks when in dc (power save) mode. Must be able to work with p_state unsupported cases Can cause flicker when OS notifies us of dc state change how: added dal3 interface for KMD added pathway to query smu for this softmax added blank before clock change to override underflow added logic to change clk based on pstatesupport and softmax added logic in prepare/optimize_bw to conform while changing clocks Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/display: Add helper for blanking all dp displaysLeo (Hanghong) Ma
[Why & How] 1. The code to blank all dp display have been called many times, so add helpers in dc_link to make it more concise. 2. Add some check to fix the dmesg errors at boot and resume from S3 on dcn3.1 during DQE's promotion test. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 21:08:58 +0000