summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
AgeCommit message (Collapse)Author
2022-01-18drm/amd/display: move calcs folder into DMLIsabella Basso
The calcs folder has FPU code on it, which should be isolated inside the DML folder as per https://patchwork.freedesktop.org/series/93042/. This commit aims single-handedly to correct the location of such FPU code and does not refactor any functions. Changes since v2: - Corrected problems to compile when DCN was disabled. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Add support for SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616.Mario Kleiner
Add the necessary format definition, bandwidth and pixel size mappings, prescaler setup, and pixelformat selection, following the logic already present for SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616. The new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 is implemented as the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 format, but with swapped red <-> green color channel, by use of the hardware xbar. Please note that on the DCN 1/2/3 display engines, the pixelformat in hubp and dpp setup for the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 and the new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 was changed from format id 22 to id 26. See amd/include/navi10_enum.h for the meaning of the id's. For format 22, the display engine read the framebuffer in 16 bpc format, but truncated to the 12 bpc actually supported by later pipeline stages. However, the engine took the 12 LSB of each color component for truncation, which is incompatible with rendering at least under Vulkan, where content is 16 bit wide, and a 12 MSB alignment would be appropriate, if any. Format 20 for ARGB16161616_12MSB does work, but even better, we can choose format 26 for ARGB16161616_UNORM, keeping all 16 bits around until later stages of the display pipeline. This allows to directly consume what the rendering hw produces under Vulkan for swapchain format VK_FORMAT_R16G16B16A16_UNORM, as tested with a patched version of the current AMD open-source amdvlk driver which maps swapchain format VK_FORMAT_R16G16B16A16_UNORM onto DRM_FORMAT_XBGR16161616. The old id 22 would cause colorful pixeltrash to be displayed instead. Tested under DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display/dc/calcs/dce_calcs: Remove some large variables from the stackLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘bw_calcs_init’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2726:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=] v2: squash in sizeof fix Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack ↵Lee Jones
to the heap Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2016:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Colin Ian King <colin.king@canonical.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amd/display/dc/calcs/dce_calcs: Demote non-conformant kernel-doc ↵Lee Jones
function headers Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2753: warning: Function parameter or member 'vbios' not described in 'is_display_configuration_supported' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2753: warning: Function parameter or member 'calcs_output' not described in 'is_display_configuration_supported' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'ctx' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'dceip' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'vbios' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'pipe' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'pipe_count' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'calcs_output' not described in 'bw_calcs' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lee Jones <lee.jones@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amd/display/dc/calcs/dce_calcs: Remove unused variables ↵Lee Jones
'v_filter_init_mode' and 'sclk_lvl' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:109:18: warning: variable ‘v_filter_init_mode’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘bw_calcs’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3031:21: warning: variable ‘sclk_lvl’ set but not used [-Wunused-but-set-variable] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-02drm/amd: fix typoesBernard Zhao
Fix typoes. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-30drm/amd/display: remove useless if/elseZou Wei
Fix the following coccinelle report: ./drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:1367:3-5: WARNING: possible condition with no effect (if == else) Both branches are the same, so remove the if/else altogether. Fixes: 81875979f0b2 ("drm/amd/display: Remove extra pairs of parentheses in dce_calcs.c") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amd/display: fix indentation issue on a hunk of codeColin Ian King
There are multiple statements that are indented incorrectly. Add in the missing tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: use true, false for bool variable in dce_calcs.czhengbin
Fixes coccicheck warning: drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:157:46-64: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:159:2-20: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:161:46-64: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:163:2-20: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:289:1-12: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:290:1-12: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:341:3-14: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:343:4-15: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amdgpu/display: add flag for multi-display mclk switchingAlex Deucher
Add a dcfeaturemask flag for mclk switching. Disable by default; enable once the feature has seen more testing. Set amdgpu.dcfeaturemask=2 on the kernel command line in grub to enable this. Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: update bw_calcs to take pipe sync into account (v3)Alex Deucher
Properly set all_displays_in_sync so that when the data is propagated to powerplay, it's set properly and we can enable mclk switching when all monitors are in sync. v2: fix logic, clean up v3: check for blending chains, simplify logic Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: add dcc programming for dual planeDmytro Laktyushkin
Add dual plane dcc programming support for surfaces. Removes unions from plane size and dcc params as they serve no practical purpose only making our code more convoluted. This results in easy dual plane dcc and surface size programming. Temporary diags_dm code is used to handle the interface change without breaking functionality as a diags change needs to be applied after this one. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-10drm/amd: drop use of drmp.h in os_types.hSam Ravnborg
Drop use of the deprecated drmP.h from display/dc/os_types.h Fix all fallout after this change. Most of the fixes was adding a missing include of vmalloc.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-4-sam@ravnborg.org
2019-01-14drm/amd/display: Use 100 Hz precision for pipe pixel clocksKen Chalmers
[Why] Users would like more accurate pixel clocks, especially for fractional "TV" frame rates like 59.94 Hz. [How] Store and communicate pixel clocks with 100 Hz accuracy from dc_crtc_timing through to BIOS command table setpixelclock call. Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-14drm/amd/display: Fix 3D stereo issues.Charlene Liu
We were not providing the correct pixel clocks to DML for marks calculation. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Convert remaining loggers off dc_loggerNicholas Kazlauskas
- Removed dal/dm/dc loggers from linux, switched to kernel prints - Modified functions that used these directly to use macros - dc_logger support is completely dropped from Linux Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-18drm/amdgpu/display: remove VEGAM config optionAlex Deucher
Leftover from bringup. No need to keep it around for upstream. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: Implement VEGAM device IDs in DCJerry (Fangzhi) Zuo
Implement device IDs for VEGAM Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Fill calcs date from stream src/dst if availableJun Lei
We would otherwise fallback to the timing, which would always give us identity. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Adding stutter entry wm to dce bw structMikita Lipski
Adding the stutter_entry_wm object to dce_bw_output struct and populating it with bw calculations data Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Add debug prints for bandwidth calculationsBhawanpreet Lakha
Using the three functions we can print the dceip, vbios and data struct for bandwidth calculations. This is useful for debugging bandwidth calculation issues without a debugger Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: fix Polaris 12 bw bounding boxDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14drm/amd/display: update dce_calcs to latest versionDmytro Laktyushkin
Bw spreadsheet was updated while dce_calcs was not Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Change blackout time to 0 on CZ/STHarry Wentland
These should only be non-0 if big hammer w/a is implemented. Currently DC doesn't implement it, so leave them 0. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Remove extra pairs of parentheses in dce_calcs.cMatthias Kaehlcke
The double parentheses are not needed. Removing them fixes multiple warnings like this when building with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:617:42: error: equality comparison with extraneous parentheses [-Werror,-Wparentheses-equality] if ((data->graphics_micro_tile_mode == bw_def_rotated_micro_tiling)) { Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Add disclaimer to BW and DML code provided by HWHarry Wentland
This code can sometimes look troubling but we trust it as it comes from HW teams with a guarantee of correctness. Add a note to these files to explain this. v2: thing -> things Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-08amd/display: Fix potential null dereference in dce_calcs.cErnst Sjöstrand
Reported by smatch: bw_calcs() error: potential null dereference 'data' Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-02drm/amdgpu/display: fix integer arithmetic problemArnd Bergmann
gcc warns about an ambiguous integer calculation: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function 'calculate_bandwidth': drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:534:5: error: this decimal constant is unsigned only in ISO C90 [-Werror] data->lb_line_pitch = bw_ceil2(bw_mul(bw_div(bw_frc_to_fixed(2401171875, 100000000), bw_int_to_fixed(3)), bw_ceil2(data->source_width_in_lb, bw_int_to_fixed(8))), bw_int_to_fixed(48)); ^~~~ Marking the constant as explicitly unsigned makes it work fine everywhere without warnings. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-28drm/amd/display: Use kernel alloc/freeHarry Wentland
Abstractions are frowned upon. cocci script: virtual context virtual patch virtual org virtual report @@ expression ptr; @@ - dm_alloc(ptr) + kzalloc(ptr, GFP_KERNEL) @@ expression ptr, size; @@ - dm_realloc(ptr, size) + krealloc(ptr, size, GFP_KERNEL) @@ expression ptr; @@ - dm_free(ptr) + kfree(ptr) v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Move scl_data to plane_resHarry Wentland
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/\.scl_data/\.plane_res.scl_data/g' find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/->scl_data/->plane_res.scl_data/g' Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Rename more dc_surface stuff to plane_stateHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Roll core_stream into dc_streamLeo (Sunpeng) Li
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Roll core_surface into dc_surfaceHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: refactor bw related variable structure in val_ctxDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: fix dce_calc surface pitch setting for non underlay pipesDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Rename bandwidth_calcs.h to dce_calcs.hHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: fix bw calc internal initialization errorDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Fixed bandwidth calculation error when converting fractionsLogatharshan Thothiralingam
[Problem] VSR greyed out [Root cause] When converting fractions, we were using the integer function, which let to a large display clock and the view was not supported [Solution] Change the integer to fraction functions Signed-off-by: Logatharshan Thothiralingam <logatharshan.thothiralingam@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Remove DCE12 guardsAlex Deucher
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Enable DCE12 supportAlex Deucher
This wires DCE12 support into DC and enables it. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: rename bandwidth_calcs.c to dce_calcs.c (v2)Dmytro Laktyushkin
v2: agd: squash in the Makefile change as well. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Eagle Yeh <eagle.yeh@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 16:24:30 +0000