| Age | Commit message (Collapse) | Author |
|---|
|
To get the device context, replace pr_ with dev_ functions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Current kfd driver has its own PASID value for a kfd process and uses it to
locate vm at interrupt handler or mapping between kfd process and vm. That
design is not working when a physical gpu device has multiple spatial
partitions, ex: adev in CPX mode. This patch has kfd driver use same pasid
values that graphic driver generated which is per vm per pasid.
These pasid values are passed to fw/hardware. We do not need change interrupt
handler though more pasid values are used. Also, pasid values at log are
replaced by user process pid; pasid values are not exposed to user. Users see
their process pids that have meaning in user space.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Before scheduling a recovery due to scheduler/job hang, check if a RAS
error is detected. If so, choose RAS recovery to handle the situation. A
scheduler/job hang could be the side effect of a RAS error. In such
cases, it is required to go through the RAS error recovery process. A
RAS error recovery process in certains cases also could avoid a full
device device reset.
An error state is maintained in RAS context to detect the block
affected. Fatal Error state uses unused block id. Set the block id when
error is detected. If the interrupt handler detected a poison error,
it's not required to look for a fatal error. Skip fatal error checking
in such cases.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Driver mode-2 is only supported by relative new
smc firmware.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Traditional utcl2 fault_status polling does not
work in SRIOV environment. The polling of fault
status register from guest side will be dropped
by hardware.
Driver should switch to check utcl2 interrupt
source id to identify utcl2 poison event. It is
set to 1 when poisoned data interrupts are
signaled.
v2: drop the unused local variable (Tao)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add amdgpu ras POSION_CONSUMPTION event id support.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFX v9.4.4 uses mode1 reset to handle poison consumption.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFX v9.4.3 uses mode1 reset, other ASICs choose mode2.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Per firmware's requirement, replace mode2 with mode1.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Prepare to handle pasid poison consumption.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mode-2 reset is the only reliable method that can get
GC/SDMA back when poison is consumed. mmhub requires
mode-1 reset.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Each RAS block has different requirement for gpu reset in poison
consumption handling.
Add support for mmhub RAS poison consumption handling.
v2: remove the mmhub poison support for kfd int v10.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support the query for both gfxhub and mmhub, also replace
xcc_id with hub_inst.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace it with related interface in gfxhub functions.
v2: replace node id with xcc id.
get node id for query_utcl2_poison_status
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support passing poison consumption ras blocks
to SRIOV.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No functional change. Use ratelimited version of pr_ to avoid
overflowing of dmesg buffer
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Interrupt sq data bits were not taken properly from contextid0 and contextid1.
Use macro KFD_CONTEXT_ID_GET_SQ_INT_DATA instead.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For GFX 9.4.3, interrupt handling needs to be updated for:
- Interrupt cookie will have a NodeId field. Each KFD
node needs to check the NodeId before processing the
interrupt.
- For CPX mode, there are additional checks of client ID
needed to process the interrupt.
- Add NodeId to the process drain interrupt.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The debugger must be notified by any debugger subscribed exception
that comes from hardware interrupts.
If a debugger session exits, any exceptions it subscribed to may still
have interrupts in the interrupt ring buffer or KGD/KFD pipeline.
To prevent a new session from inheriting stale interrupts, when a new
queue is created, open an interrupt drain and allow the IH ring to drain
from a timestamped checkpoint. Then inject a custom IV so that once
the custom IV is picked up by the KFD, it's safe to close the drain
and proceed with queue creation.
The drain must also be on debug disable as SW interrupts may still
be processed. Drain at this time and clear all the exception status.
The debugger may also not be attached nor subscibed to certain
exceptions so forward them directly to the runtime.
GFX10 also requires its own IV processing, hence the creation of
kfd_int_process_v10.c. This is because the IV from SQ interrupts are
packed into a new continguous format unlike GFX9. To make this clear,
a separate interrupting handling code file was created.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a debug operation that allows the debugger to send an exception
directly to runtime through a payload address.
For memory violations, normal vmfault signals will be applied to
notify runtime instead after passing in the saved exception data
when a memory violation was raised to the debugger.
For runtime exceptions, this will unblock the runtime enable
function which will be explained and implemented in a follow up
patch.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce a new structure, kfd_node, which will now represent
a compute node. kfd_node is carved out of kfd_dev structure.
kfd_dev struct now will become the parent of kfd_node, and will
store common resources such as doorbells, GTT sub-alloctor etc.
kfd_node struct will store all resources specific to a compute
node, such as device queue manager, interrupt handling etc.
This is the first step in adding compute partition support in KFD.
v2: introduce kfd_node struct to gc v11 (Hawking)
v3: make reference to kfd_dev struct through kfd_node (Morris)
v4: use kfd_node instead for kfd isr/mqd functions (Morris)
v5: rebase (Alex)
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add initial support for soc21 in KFD compute
driver (Mukul)
- Add new definition for soc21 device.
- Add new file for amdgpu-kfd interface for GFX11 family.
- Add new file for queue management, interrupt handling,
mqd management for GFX11 family in KFD driver.
- Related changes/updates for soc21 device in
KFD driver.
- Repurpose last 2 entries of SDMA MQD for driver use.
v2: Add an optional argument into update queue operation (Mukul)
v3: Switch to ip version check, replace kgd_dev with
amdgpu_device (Hawking)
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MEC firmware sometimes sends signal interrupts without a valid context ID
on end of pipe events that don't intend to signal any HSA signals.
This triggers the slow path in kfd_signal_event_interrupt that scans the
entire event page for signaled events. Detect these signals in the top
half interrupt handler to stop processing them as early as possible.
Because we now always treat event ID 0 as invalid, reserve that ID during
process initialization.
v2: Update firmware version checks to support more GPUs
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the status out when it passes, and also tell user gpu reset
is triggered when we fall back to legacy way.
v2: make the message more explicit.
v3: change succeeds to succeeded.
replace pr_warn with dev_warn.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Do RAS page retirement and use gpu reset as fallback in UTCL2 fault
handler.
v2: replace vm fault event with posion consumed event in UTCL2
poison consumption.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Client ID is more accruate here and we can deal with more different
cases with client ID.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Combine reading and setting poison flag as one atomic operation
and add print message for the function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise gpu reset will be triggered unconditionally in poison
consumption.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A bunch of errors and warnings are leftover KFD over the years, attempt
to fix the errors and most warnings reported by checkpatch tool. Still a
few warnings remain which may be false positives so ignore them for now.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the SPDX License header for all the KFD files.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace reset queue for specific PASID with unmap all queues, reset
queue could break CP scheduler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As the function is used in more different cases, use a more general
name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
event_interrupt_wq_v9
Enable sdma ecc interrupt event can be handled by event_interrupt_wq_v9.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
CP supports unmap queue with reset mode which only destroys specific queue without affecting others.
Replacing whole gpu reset with reset queue mode for RAS poison consumption
saves much time, and we can also fallback to gpu reset solution if reset
queue fails.
v2: Return directly if process is NULL;
Reset queue solution is not applicable to SDMA, fallback to legacy
way;
Call kfd_unref_process after lookup process.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initializes kfd->device_info given either asic_type (enum) if GFX
version is less than GFX9, or GC IP version if greater. Also takes in vf
and the target compiler gfx version. Uses SDMA version to determine
num_sdma_queues_per_engine.
Convert device_info to a non-pointer member of kfd, change references
accordingly.
Change unsupported asic condition to only probe f2g, move device_info
initialization post-switch.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Modified definitions:
- amdgpu_amdkfd_submit_ib
- amdgpu_amdkfd_set_compute_idle
- amdgpu_amdkfd_have_atomics_support
- amdgpu_amdkfd_flush_gpu_tlb_pasid
- amdgpu_amdkfd_flush_gpu_tlb_pasid
- amdgpu_amdkfd_gpu_reset
- amdgpu_amdkfd_alloc_gtt_mem
- amdgpu_amdkfd_free_gtt_mem
- amdgpu_amdkfd_alloc_gws
- amdgpu_amdkfd_free_gws
- amdgpu_amdkfd_ras_poison_consumption_handler
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In ras poison mode, page retirement will be handled by the irq handler of the
module which consumes corrupted data.
v2: rename ras_process_cb to ras_poison_consumption_handler.
move the handler's implementation from ASIC specific file to common
file.
v3: call gpu reset for xGMI connected mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Follow the same apporach as GFX to handle SDMA
poison consumption. Send SIGBUS to application
when receives SDMA_ECC interrupt and issue gpu
reset either mode 2 or mode 1 to get the engine
back
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li<dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The user applications maybe register the KFD_EVENT_TYPE_HW_EXCEPTION and
KFD_EVENT_TYPE_MEMORY events, driver could notify them when poison data
consumed. Beside that, some applications maybe register SIGBUS signal
hander. These applications will handle poison data by themselves, exit
or re-create context to re-dispatch works.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu.h is included in kfd_priv.h
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In poison progogate mode, when driver receive the edc error interrupt
from SQ, driver should kill the process by pasid which is using the
poison data, and then trigger GPU reset.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is to keep wavefront context for debug purpose
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add check for SExSH clients in kfd interrupt handler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We can have the same src ids for different client ids so make sure to
check both the client id and the source id when handling interrupts.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.
VM fault event is done in this patch.
v2: - remove UNREGISTER and add event ENABLE/DISABLE
- correct kfifo usage
- move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return statements in functions returning bool should use
true/false instead of 1/0.
drivers/gpu/drm/amd/amdkfd/kfd_int_process_v9.c:40:9-10:
WARNING: return of 0/1 in function 'event_interrupt_isr_v9' with return type bool
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Because we record the mapping under non HWS mode in the software,
we can query pasid through vmid using the stored mapping instead of
reading from ATC registers.
This also prepares for the defeatured ATC block in future ASICs.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Handle interrupts for second mmhub.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is a known gfx9 HW issue, and this change can perfectly workaround
the issue.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
