summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdkfd/cwsr_trap_handler_gfx10.asm
AgeCommit message (Collapse)Author
2025-01-09drm/amdkfd: Move gfx12 trap handler to separate fileJay Cornwall
gfx12 derivatives will have substantially different trap handler implementations from gfx10/gfx11. Add a separate source file for gfx12+ and remove unneeded conditional code. No functional change. v2: Revert copyright date to 2018, minor comment fixes Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Cc: Jonathan Kim <jonathan.kim@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdkfd: Extend gfx12 trap handler fix to gfx10/11Jay Cornwall
In commit fda812ebe3d9 ("drm/amdkfd: gfx12 context save/restore trap handler fixes") the following fix was introduced but incorrectly restricted to gfx12. The same issue and a corresponding fix apply to gfx10 and gfx11. Do not overwrite TRAPSTS.{SAVECTX,HOST_TRAP} when restoring this register. Both of these fields can assert while the wavefront is running the trap handler. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdkfd: Handle deallocated VPGRs in gfx11+ trap handlerJay Cornwall
A wavefront may deallocate its VGPRs at the end of a program while waiting for memory transactions to complete. If it subsequently receives a context save exception it will be unable to save, since this requires VGPRs. In this case the trap handler should terminate the wavefront. Fixes intermittent VM faults under context switching load. V2: Use S_ENDPGM instead of S_ENDPGM_SAVED for performance counters Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdkfd: gfx12 context save/restore trap handler fixesJay Cornwall
Fix LDS size interpretation: 512 bytes (>= gfx12) vs 256 (< gfx12). Ensure STATE_PRIV.BARRIER_COMPLETE cannot change after reading or before writing. Other waves in the threadgroup may cause this field to assert if they complete the barrier. Do not overwrite EXCP_FLAG_PRIV.{SAVE_CONTEXT,HOST_TRAP} when restoring this register. Both of these fields can assert while the wavefront is running the trap handler. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29drm/amdkfd: Replace deprecated gfx12 trap handler instructionsJay Cornwall
Newer assemblers reject S_WAITCNT. All instances of S_WAITCNT can be replaced by S_WAITCNT 0 (< gfx12) or S_WAIT_IDLE (>= gfx12) since there is no concurrency of different memory instruction classes. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-02drm/amdkfd: enable missed single-step workaround for gfx12Laurent Morichetti
When trap_ctrl.trap_after_inst is set, it is possible for a wave to enter the trap handler, after single-stepping an instruction and a save_context is raised, with only save_context set in excp_flag_priv. Because excp_flag_priv.trap_after_inst is not reliably set, we need to use the missed single-step workaround for gfx12 as well. Also add wave_start and wave_end as exceptions that should be handled by the 2nd level trap handler. Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com> Tested-by: Lancelot Six <lancelot.six@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-02drm/amdkfd: save and restore barrier state for gfx12Lancelot SIX
Add support to save and restore the work group barrier state in gfx12 CWSR trap handler. There is no support to directly restore the signal count of a barrier state, so instead this patch repeatedly calls s_barrier_signal to increment the signal count to the desired value. In this patch, I have implemented the logic to restore the barrier at the end of the block restoring the HWREGs. This process needs to be done by exactly 1 wave per work group. To achieve this, the initial value of s_restore_spi_init_hi (containing a FIRST_WAVE bit) needs to be saved up until that point. An alternative could be restore the barrier earlier in the process (around when LDS is restored, as the same wave does both). Doing this would break the pattern that the restore procedure follows the CWSR area layout. Before restoring the barrier, this patch checks if the barrier was whose state was saved has the "valid" bit set, even if I don't think this barrier can be in an invalid state during context save. I expect this test to always be true. Signed-off-by: Lancelot SIX <lancelot.six@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-02drm/amdkfd: Add gfx12 trap handler supportJay Cornwall
- HWREG changes since gfx11 - Save/restore barrier state - get_wave_size is now reserved by assembler v2: rebase (Alex) Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-02drm/amdkfd: Move trap handler coherence flags to preprocessorJay Cornwall
No functional change. Preparation for gfx12 support. v2: drop unrelated change (Alex) Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-06drm/amdkfd: Use SQC when TCP would fail in gfx10.1 context saveLaurent Morichetti
Similarly to gfx9, gfx10.1 drops vector stores when an xnack error is raised. To work around this issue, use scalar stores instead of vector stores when trapsts.xnack_error == 1. Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdkfd: pass debug exceptions to second-level trap handlerLaurent Morichetti
Call the 2nd level trap handler if the cwsr handler is entered with any one of wave_start, wave_end, or trap_after_inst exceptions. Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com> Tested-by: Lancelot Six <lancelot.six@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amdkfd: Use S_ENDPGM_SAVED in trap handlerJay Cornwall
This instruction has no functional difference to S_ENDPGM but allows performance counters to track save events correctly. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdkfd: Clear the VALU exception state in the trap handlerLaurent Morichetti
The trap handler could be entered with pending VALU exceptions, so clear the exception state before issuing vector instructions. Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com> Tested-by: Lancelot Six <lancelot.six@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amdkfd: Sign-extend TMA address in trap handlerJay Cornwall
SMEM instructions can reach addresses above 47 bits but require bit 47 to be sign-extended through bits [63:48]. This allows the TMA to be relocated in a following patch. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdkfd: update GFX11 CWSR trap handlerJay Cornwall
With corresponding FW change fixes issue where triggering CWSR on a workgroup with waves in s_barrier wouldn't lead to a back-off and therefore cause a hang. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Graham Sider <Graham.Sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-09-29drm/amdgpu: Enable SA software trap.David Belanger
Enables support for software trap for MES >= 4. Adapted from implementation from Jay Cornwall. v2: Add IP version check in conditions. v3: Remove debugger code changes. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-26drm/amdkfd: Add gfx11 trap handlerJay Cornwall
Based on gfx10 with following changes: - GPR_ALLOC.VGPR_SIZE field moved (and size corrected in gfx10) - s_sendmsg_rtn_b64 replaces some s_sendmsg/s_getreg - Buffer instructions no longer have direct-to-LDS modifier Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com> Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-26drm/amdkfd: port cwsr trap handler from dkms branchEric Huang
Most of changes are for debugger feature, and it is to simplify trap handler support for new asics in the future. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amdkfd: Fix spurious debug exception on gfx10Jay Cornwall
s_barrier triggers a debug exception when issued with PRIV=1, DEBUG_EN=1. This causes spurious notifications to rocm-gdb. Clear MODE before issuing s_barrier and restore MODE afterwards in the context restore handler. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10Revert "drm/amdkfd: Unify gfx9/gfx10 context save area layouts"Felix Kuehling
This reverts commit 0a5baee415000a3e18730ac98e19d046c3cebbe6. The change introduced a regression on some chips. Reverting until a proper solution can be found. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10Revert "drm/amdkfd: Fix spurious debug exception on gfx10"Felix Kuehling
This reverts commit ea368183ae900e376b66d3f23da22acde48e385a. Needed due to conflicts when reverting "drm/amdkfd: Unify gfx9/gfx10 context save area layouts". Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdkfd: Fix spurious debug exception on gfx10Jay Cornwall
s_barrier triggers a debug exception when issued with PRIV=1, DEBUG_EN=1. This causes spurious notifications to rocm-gdb. Clear MODE before issuing s_barrier and restore MODE afterwards in the context restore handler. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amdkfd: Unify gfx9/gfx10 context save area layoutsLaurent Morichetti
Add some padding before the MODE register in the HWREGs block to preserve the same layout as gfx9. This simplifies implementation of a user-mode debugger. Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdkfd: Support debugger in Navi1x trap handlerJay Cornwall
- Preserve scalar GPRs ttmp[4:11] and ttmp13 - Add single step exception during context save workaround - Remove incorrect PC adjustment during context save Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdkfd: Support newer assemblers in gfx10 trap handlerJay Cornwall
The contents of macros are parsed by the assembler before conditions have been tested. This causes assembly errors when using IP-specific instructions in the IP-unified trap handler. Add a preprocessing step to filter IP-specific code. Also guard a Navi1x-specific instruction (no effect on Sienna_Cichlid). Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdkfd: Add Sienna_Cichlid trap handler supportJay Cornwall
- Replace SQC stores with TCP stores - Synchronize with MSG_SAVEWAVE via lgkmcnt - HW_REG_IB_STS is now read-only Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdkfd: Fix race in gfx10 context restore handlerJay Cornwall
Missing synchronization with VGPR restore leads to intermittent VGPR trashing in the user shader. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: Swap trap temporary registers in gfx10 trap handlerJay Cornwall
ttmp[4:5] hold information useful to the debugger. Use ttmp[14:15] instead, aligning implementation with gfx9 trap handler. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Save/restore vcc on gfx10Jay Cornwall
VCC moved out of user SGPR allocation in gfx10. It's now stored in SGPRs 106-107. Also fixes incorrect SGPR read offsets. Cc: Shaoyun Liu <shaoyun.liu@amd.com> Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: shaoyunl <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Save/restore flat_scratch_lo/hi on gfx10Jay Cornwall
These moved from SGPRs in gfx9 to HWREG in gfx10. Cc: Shaoyun Liu <shaoyun.liu@amd.com> Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: shaoyunl <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Fix gfx10 wave64 VGPR context restoreJay Cornwall
Copy/paste error, first 4 VGPRs are separated by 64 dwords (256 bytes). Cc: Shaoyun Liu <shaoyun.liu@amd.com> Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: shaoyunl <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Replace gfx10 trap handler with correct branchJay Cornwall
Previously submitted code was taken from an incorrect branch and was non-functional. Cc: Oak Zeng <oak.zeng@amd.com> Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-By: Oak Zeng <oak.zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amdkfd: Add navi10 support to amdkfd. (v3)Philip Cox
KFD (kernel fusion driver) is the kernel driver for the compute backend for usermode compute stack. v2: squash in updates (Alex) v3: squash in rebase fixes (Alex) Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Philip Cox <Philip.Cox@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 07:49:20 +0000