| Age | Commit message (Collapse) | Author |
|---|
|
Rather than checking in the callbacks, check if the reset
type is supported in the caller.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make them consistent and use the reset flags.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the scheduler wqueue stopping and starting into
the ring reset callbacks. On some IPs we have to reset
an engine which may have multiple queues. Move the wqueue
handling into the backend so we can handle them as needed
based on the type of reset available.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the force completion handling into each ring
reset function so that each engine can determine
whether or not it needs to force completion on the
jobs in the ring.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Going forward, we'll need more than just the vmid. Add the
guilty amdgpu_fence.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Add kicker firmwares loading for gfx11/smu13/psp13
2. Register additional MODULE_FIRMWARE entries for kicker fws
- gc_11_0_0_rlc_kicker.bin
- gc_11_0_0_imu_kicker.bin
- psp_13_0_0_sos_kicker.bin
- psp_13_0_0_ta_kicker.bin
- smu_13_0_0_kicker.bin
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix the indentation
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:6992 gfx_v11_ip_dump
compiler: gcc-11 (Debian 11.3.0-12) 11.3.0
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505071619.7sHTLpNg-lkp@intel.com/
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DRM_AMDGPU_NAVI3X_USERQ config support is not required for
usermode queue.
v2: rebase.
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Part of the code in gfx_v11_0_get_csb_buffer can be removed in favor of
some GFX CSB helpers. This commit removes the duplicated part for the
GFX 11 CSB function.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is load usermode queue based on FW support for gfx11.
CP Ucode FW version: [PFP = 2530, ME = 2390, MEC = 2600, MES = 120]
v2: Addressed review comments from Alex.
- Just check the firmware versions directly.
v3: Firmware version checks only for Navi3x(by Alex).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set up TMZ for queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace disable_kq parameter with user_queue parameter.
The parameter has the following logic:
-1 = auto (ASIC specific default)
0 = user queues disabled
1 = user queues enabled and kernel queues enabled (if supported)
2 = user queues enabled and kernel queues disabled
The default behavior (-1) is currently the same as 0 for current
ASICs. To enable user queues (in addition to kernel queues) set
user_queue=1. To enable user queues and disable kernel queues
(to make all resources available to user queues), set user_queue=2.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Regardless of whether we disable kernel queues, we need
to take an extra reference to the pipe interrupts for
user queues to make sure they stay enabled in case we
disable them for kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for additional GFX11.5.2/11.5.3 series GPUs to
ensure data isolation among GPU tasks. The cleaner shader is tasked with
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid
data leakage and guarantees the accuracy of computational results.
This update extends cleaner shader support to GFX11.5.2/11.5.3 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Plumb in support for disabling kernel queues in
GFX11. We have to bring up a GFX queue briefly in
order to initialize the clear state. After that
we can disable it.
v2: use ring counts per Felix' suggestion
v3: fix stream fault handler, enable EOP interrupts
v4: fix MEC interrupt offset (Sunil)
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With the ME details fixed, we can now consolidate
this state. Also split out the userq setup into a separate
switch statement so that we can set them per IP version
when the firmwares are ready.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This was leftover from MES bring up when we had MES
user queues in the kernel. It's no longer used so
remove it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently disabled until the firmwares are officially
released.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
s/CONFIG_DRM_AMD_USERQ_GFX/CONFIG_DRM_AMDGPU_NAVI3X_USERQ/
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add mqd for userq compute queue for gfx11/gfx12
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Add a field in struct amdgpu_mqd_prop for userqueue
secure sem fence address since now we have a generic
file for mes_userqueue.c
- Add secure sem fence address mqd support to gfx12 into
their corresponding init functions.
- Enable secure semaphore IRQ handling
V2: Address review comment from Alex:
Use fence_address instead of fenceaddress (Shashank)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now that all of the IP specific code has been moved into
the IP specific functions, we can make this code generic.
V2: Fixed build errors and porting logics (Shashank)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the addresses for the UQ metadata.
V2: Fix lower address (Shashank)
V3: Restore lower_32_bits() for MQD addresses (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, the shadow FW space size and alignment information is
protected under a flag (adev->gfx.cp_gfx_shadow) which gets set
only in case of SRIOV setups.
if (amdgpu_sriov_vf(adev))
adev->gfx.cp_gfx_shadow = true;
But we need this information for GFX Userqueues, so that user can
create these objects while creating userqueue. This patch series
creates a method to get this information bypassing the dependency
on this check.
This patch:
- adds a new input parameter flag to the gfx.funcs->get_gfx_shadow_info
fptr definition, so that it can accommodate the information without the
check (adev->gfx.cp_gfx_shadow) on request.
- updates the existing definition of amdgpu_gfx_get_gfx_shadow_info to
adjust with this new flag.
Next patch in the series is adding a UAPI which will consume this info.
V2: split this patch from the new UAPI patch
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support to handle the userqueue protected fence signal hardware
interrupt.
Create a xarray which maps the doorbell index to the fence driver address.
This would help to retrieve the fence driver information when an userq fence
interrupt is triggered. Firmware sends the doorbell offset value and
this info is compared with the queue's mqd doorbell offset value.
If they are same, we process the userq fence interrupt.
v1:(Christian):
- use xa_load to extract the fence driver.
- move the amdgpu_userq_fence_driver_process call within the xa_lock
as there is a chance that fence_drv might be freed.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch:
- adds a kernel config option "CONFIG_DRM_AMDGPU_NAVI3X_USERQ"
- moves the usequeue initialization code for all IPs under
this flag
- cover the core userqueue functions under this config
- adds stub function for userqueue ioctl.
so that the userqueue works only when the config is enabled.
V9: Introduce this patch
V10: Call it CONFIG_DRM_AMDGPU_NAVI3X_USERQ instead of
CONFIG_DRM_AMDGPU_USERQ_GFX (Christian)
V11: Add GFX in the config help description message.
V12: Add depends on BROKEN for this config, remove this when the rest of
the code is available.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch does the necessary changes required to
enable compute workload support using the existing
usermode queues infrastructure.
V9: Patch introduced
V10: Add custom IP specific mqd strcuture for compute (Alex)
V11: Rename drm_amdgpu_userq_mqd_compute_gfx_v11 to
drm_amdgpu_userq_mqd_compute_gfx11 (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch enables GFX-v11 IP support in the usermode queue base
code. It typically:
- adds a GFX_v11 specific MQD structure
- sets IP functions to create and destroy MQDs
- sets MQD objects coming from userspace
V10: introduced this spearate patch for GFX V11 enabling (Alex).
V11: Addressed review comments:
- update the comments in GFX mqd structure informing user about using
the INFO IOCTL for object sizes (Alex)
- rename struct drm_amdgpu_userq_mqd_gfx_v11 to
drm_amdgpu_userq_mqd_gfx11 (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement the GFX11 compute pipe reset. As the GFX11 CPFW
still hasn't fully supported pipe reset yet, therefore
disable the KCQ pipe reset temporarily.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement the kernel graphics queue pipe reset,and the driver
will fallback to pipe reset when the queue reset fails. However,
the ME FW hasn't fully supported pipe reset yet so disable the
KGQ pipe reset temporarily.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the actual number of queues per pipe for ME0 (gfx).
This way we will dump all of the queues properly in
dev core dumps.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The driver currently sets up one kgq per pipe. As such
adev->gfx.me.num_queue_per_pipe is hardcoded to 1 everywhere.
This is fine for kernel queues, but when we enable user queues
we need to know that actual number of queues per pipe. Decouple
the kgq setup from the actual hardware count. For dev core
dumps and user queues, we want to know the actual number
of queues per pipe.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GC11 only has 1 mec.
Fixes: 3d879e81f0f9 ("drm/amdgpu: add init support for GFX11 (v2)")
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This looks unnecessary and actually extremely harmful since using kmap()
is not possible while inside the ring reset.
Remove all the extra mapping and unmapping of the MQDs.
v2: also fix debugfs
v3: fix coding style typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX11.5.0/11.5.1 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX11.5.0/11.5.1 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Just use the default values. There's not need to
get the value from hardware and it could cause problems
if we do that at runtime and gfxoff is active.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of is_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of get_clockgating_state.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
atom bios header files are not required in these files.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Consolidate PM4 definitions. Most of these were previously
only defined in UMDs. Add them here as well and sync with
latest packets. Also no need to include soc15d.h on gfx10+.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Suggested-by: Saurabh Verma <saurabh.verma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable dynamic workload profile switching for gfx11.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes GC IP version 11.5.3.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The RB bitmap width per SA may be 0x1 for some ASICs.
Use the actual bitmap of SA instead of 0x3 to determine
the active RB bitmap.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's unused.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace kcq queue reset with existing function amdgpu_mes_reset_legacy_queue.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
