| Age | Commit message (Collapse) | Author |
|---|
|
Compared to previous generations, Granite Rapids defines the RRL control
bits {en_patspr, noover, en} in different positions, adds an extra RRL set
for the new mode of the first patrol-scrub read error, and extends the
number of CORRERRCNT registers from 4 to 8, encoding one counter per
CORRERRCNT register.
Add a Granite Rapids reg_rrl configuration table and adjust the code to
accommodate the differences mentioned above for RRL support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-8-qiuxu.zhuo@intel.com
|
|
Make the {valid bit, overwritten status, number} of RRL registers and the
{number, offsets, widths} of per-channel CORRERRCNT registers configurable.
Refactor show_retry_rd_err_log() to use the configurable fields of struct
reg_rrl, making the code more scalable and simpler.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-7-qiuxu.zhuo@intel.com
|
|
Refactor enable_retry_rd_err_log() using helper functions for both
DDR and HBM, making the RRL control bits configurable instead of
hard-coded. Additionally, explicitly define the four RRL modes for
better readability.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-6-qiuxu.zhuo@intel.com
|
|
As the number of RRL (retry_rd_err_log) registers per memory channel
increases, the positions of the RRL control bits and the widths of the
RRL registers vary across different CPU generations. Adding RRL support
for a new CPU requires handling these differences throughout the
RRL-related code.
Structure the offsets, widths, control bit positions, set numbers, modes,
etc., of the per-channel RRL registers and make them configurable to
facilitate easier RRL support for new CPUs.
No functional changes are intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-5-qiuxu.zhuo@intel.com
|
|
When enabling the retry_rd_err_log (RRL) feature during the loading of the
i10nm_edac driver with the module parameter retry_rd_err_log=2 (Linux RRL
control mode), the default values of the control bits of RRL are saved so
that they can be restored during the unloading of the driver.
In the current code, the RRL of pseudo channel 1 of HBM overwrites pseudo
channel 0 during the loading of the driver, resulting in the loss of saved
RRL for pseudo channel 0. This causes the RRL of pseudo channel 0 of HBM to
be wrongly restored with the values from pseudo channel 1 when unloading
the driver.
Fix this issue by creating two separate groups of RRL control registers
per channel to save default RRL settings of two {sub-,pseudo-}channels.
Fixes: acd4cf68fefe ("EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-3-qiuxu.zhuo@intel.com
|
|
When doing error injection to some memory DIMMs on certain Intel Emerald
Rapids servers, the i10nm_edac missed error reports for some memory DIMMs.
Certain BIOS configurations may hide some memory controllers, and the
i10nm_edac doesn't enumerate these hidden memory controllers. However, the
ADXL decodes memory errors using memory controller physical indices even
if there are hidden memory controllers. Therefore, the memory controller
physical indices reported by the ADXL may mismatch the logical indices
enumerated by the i10nm_edac, resulting in missed error reports for some
memory DIMMs.
Fix this issue by creating a mapping table from memory controller physical
indices (used by the ADXL) to logical indices (used by the i10nm_edac) and
using it to convert the physical indices to the logical indices during the
error handling process.
Fixes: c545f5e41225 ("EDAC/i10nm: Skip the absent memory controllers")
Reported-by: Kevin Chang <kevin1.chang@intel.com>
Tested-by: Kevin Chang <kevin1.chang@intel.com>
Reported-by: Thomas Chen <Thomas.Chen@intel.com>
Tested-by: Thomas Chen <Thomas.Chen@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250214002728.6287-1-qiuxu.zhuo@intel.com
|
|
The 3-bit source IDs in PCI configuration space registers, used to map
devices to sockets, are limited to 8 unique IDs, and each ID is local to
a UPI/QPI domain.
Source IDs cannot be used to map devices to sockets on UV systems
because they can exceed 8 sockets and have multiple UPI/QPI domains with
identical, repeating source IDs.
Use NUMA information to get package IDs instead of source IDs on UV
systems, and use package/source IDs to name IMC information structures.
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/all/20241213012549.43099-1-kyle.meyer@hpe.com/
|
|
The Granite Rapids CPUs with Flat2LM memory configurations may
mistakenly report near-memory errors as far-memory errors, resulting
in the invalid decoded ADXL results:
EDAC skx: Bad imc -1
Fix this incorrect far-memory error source indicator by prefetching the
decoded far-memory controller ID, and adjust the error source indicator
to near-memory if the far-memory controller ID is invalid.
Fixes: ba987eaaabf9 ("EDAC/i10nm: Add Intel Granite Rapids server support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Diego Garcia Rodriguez <diego.garcia.rodriguez@intel.com>
Link: https://lore.kernel.org/r/20241015072236.24543-3-qiuxu.zhuo@intel.com
|
|
The current skx_common determines whether the memory error source is the
near memory of the 2LM system and then retrieves the decoded error results
from the ADXL components (near-memory vs. far-memory) accordingly.
However, some memory controllers may have limitations in correctly
reporting the memory error source, leading to the retrieval of incorrect
decoded parts from the ADXL.
To address these limitations, instead of simply determining whether the
memory error is from the near memory of the 2LM system, it is necessary to
distinguish the memory error source details as follows:
Memory error from the near memory of the 2LM system.
Memory error from the far memory of the 2LM system.
Memory error from the 1LM system.
Not a memory error.
This will enable the i10nm_edac driver to take appropriate actions for
those memory controllers that have limitations in reporting the memory
error source.
Fixes: ba987eaaabf9 ("EDAC/i10nm: Add Intel Granite Rapids server support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Diego Garcia Rodriguez <diego.garcia.rodriguez@intel.com>
Link: https://lore.kernel.org/r/20241015072236.24543-2-qiuxu.zhuo@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Drop a now obsolete ppc4xx_edac driver
- Fix conversion to physical memory addresses on Intel's Elkhart Lake
and Ice Lake hardware when the system address is above the
(Top-Of-Memory) TOM address
- Pay attention to the memory hole on Zynq UltraScale+ MPSoC DDR
controllers when injecting errors for testing purposes
- Add support for translating normalized error addresses reported by an
AMD memory controller into system physical addresses using an UEFI
mechanism called platform runtime mechanism (PRM).
- The usual cleanups and fixes
* tag 'edac_updates_for_v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Drop obsolete PPC4xx driver
EDAC/sb_edac: Fix the compile warning of large frame size
EDAC/{skx_common,i10nm}: Remove the AMAP register for determing DDR5
EDAC/{skx_common,skx,i10nm}: Move the common debug code to skx_common
EDAC/igen6: Fix conversion of system address to physical memory address
EDAC/synopsys: Fix error injection on Zynq UltraScale+
RAS/AMD/ATL: Translate normalized to system physical addresses using PRM
ACPI: PRM: Add PRM handler direct call support
|
|
Commit
afdb82fd763c ("EDAC, i10nm: make skx_common.o a separate module")
made skx_common.o a separate module. With skx_common.o now a separate
module, move the common debug code setup_{skx,i10nm}_debug() and
teardown_{skx,i10nm}_debug() in {skx,i10nm}_base.c to skx_common.c to
reduce code duplication. Additionally, prefix these function names with
'skx' to maintain consistency with other names in the file.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20240829055101.56245-1-qiuxu.zhuo@intel.com
|
|
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 598afa050403 ("kbuild: warn objects shared among multiple modules")
was added to track down cases where the same object is linked into
multiple modules. This can cause serious problems if some modules are
builtin while others are not.
That test triggers this warning:
scripts/Makefile.build:236: drivers/edac/Makefile: skx_common.o is added to multiple modules: i10nm_edac skx_edac
Make this a separate module instead.
[Tony: Added more background details to commit message]
Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20240529095132.1929397-1-arnd@kernel.org/
|
|
The Granite Rapids CPU model uses similar memory controller registers
as Sapphire Rapids server but with some different configurations:
- Various memory controller numbers for different Granite Rapids CPUs.
So detect the number of present memory controllers at run time.
- Different MMIO offsets of memory controllers.
- Different triples of bus/dev/fun of some PCI devices used in i10nm_edac.
Add above configurations and Granite Rapids CPU model ID for EDAC support.
[Tony: Fixed 2 typos s/strcture/structure/]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
The numbers of memory controllers per socket, channels per memory
controller, DIMMs per channel and the triples of bus/device/function
of PCI devices used in i10nm_edac can be CPU model specific.
Add new fields to the structure res_config for above numbers and
triples to make them CPU model specific.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
The current {skx,i10nm}_edac miss the EDAC support to decode errors from
the 1st level memory (the fast "near" memory as cache) of the 2-level
memory system. Introduce a helper function skx_error_in_mem() to check
whether errors are from memory at the beginning of skx_mce_check_error().
As long as the errors are from memory (either the 1-level memory system
or the 2-level memory system), decode the errors.
Reported-and-tested-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
Sapphire Rapids server adds an extra register set for logging more
retry_rd_err_log data. So add code to print the extra register set.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220722233338.341567-1-tony.luck@intel.com
|
|
An HBM memory channel is divided into two pseudo channels. Each
pseudo channel has its own retry_rd_err_log registers. Retrieve and
print retry_rd_err_log registers of the HBM pseudo channel if the
memory error is from HBM.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220722233338.341567-1-tony.luck@intel.com
|
|
Each pseudo channel of HBM has its own retry_rd_err_log registers.
The bit 0 of ChipSelect ADXL component encodes the pseudo channel
number of HBM memory. So add ChipSelect ADXL component to get HBM
pseudo channel number.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220722233338.341567-1-tony.luck@intel.com
|
|
Current i10nm_edac only supports firmware decoder (ACPI DSM methods).
MCA bank registers of Ice Lake or Tremont CPUs contain the information
to decode DDR memory errors. To get better decoding performance, add
the driver decoder (decoding DDR memory errors via extracting error
information from MCA bank registers) for Ice Lake and Tremont CPUs.
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/
|
|
The performance of driver decoder[1] is better than the performance
of firmware decoder[2], especially on frequent correctable errors.
So use the driver decoder first, fall back to firmware decoder if
the driver decoder is unavailable. Also rename the function pointer
skx_decode to driver_decode (better name to contrast with adxl_decode).
[1] Decode errors by extracting error information from registers of
memory controllers and/or MCA bank registers.
[2] Decode errors by calling ACPI DSM methods.
Co-developed-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/
|
|
Retrieve and print retry_rd_err_log registers like the earlier change:
commit e80634a75aba ("EDAC, skx: Retrieve and print retry_rd_err_log registers")
This is a little trickier than on Skylake because of potential
interference with BIOS use of the same registers. The default
behavior is to ignore these registers.
A module parameter retry_rd_err_log(default=0) controls the mode of operation:
- 0=off : Default.
- 1=bios : Linux doesn't reset any control bits, but just reports values.
This is "no harm" mode, but it may miss reporting some data.
- 2=linux: Linux tries to take control and resets mode bits,
clears valid/UC bits after reading. This should be
more reliable (especially if BIOS interference is reduced
by disabling eMCA reporting mode in BIOS setup).
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210818175701.1611513-3-tony.luck@intel.com
|
|
A future Xeon processor will include in-package HBM (high bandwidth
memory). The in-package HBM memory controller shares the same
architecture with the regular DDR memory controller.
Add the HBM memory controller devices for EDAC support.
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-4-tony.luck@intel.com
|
|
Current i10nm_edac driver is only for system configured in 1-level
memory. If the system is configured in 2-level memory, the driver
doesn't report the 1st level memory DIMM for the error address, even
if the error occurs in the 1st level memory.
Both Ice Lake servers and Sapphire Rapids servers can be configured
in 2-level memory. Add detection of memory levels to i10nm_edac for
the two kinds of servers so that the driver can report the 2nd level
memory DIMM or the 1st level memory DIMM according to error source.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-3-tony.luck@intel.com
|
|
Some Intel servers may configure memory in 2 levels, using
fast "near" memory (e.g. DDR) as a cache for larger, slower,
"far" memory (e.g. 3D X-point).
In these configurations the BIOS ADXL address translation for
an address in a 2-level memory range will provide details of
both the "near" and far components.
Current exported ADXL components are only for 1-level memory
system or for 2nd level memory of 2-level memory system. So
add new ADXL components for 1st level memory of 2-level memory
system to fully support 2-level memory system and the detection
of memory error source(1st level memory or 2nd level memory).
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-2-tony.luck@intel.com
|
|
The Sapphire Rapids CPU model shares the same memory controller
architecture with Ice Lake server. There are some configurations
different from Ice Lake server as below:
- The device ID for configuration agent.
- The size for per channel memory-mapped I/O.
- The DDR5 memory support.
So add the above configurations and the Sapphire Rapids CPU model
ID for EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
The skx_edac driver wrongly uses the mtr register to retrieve two fields
close_pg and bank_xor_enable. Fix it by using the correct mcmtr register
to get the two fields.
Cc: <stable@vger.kernel.org>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reported-by: Matthew Riley <mattdr@google.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20200515210146.1337-1-tony.luck@intel.com
|
|
The device ID for configuration agent PCI device and the offset for
bus number configuration register can be CPU model specific. So add
a new structure res_config to make them configurable and pass res_config
to {skx,i10nm}_init() and skx_get_all_bus_mappings() for use.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200427083246.GB11036@zn.tnic
|
|
Skylake logs some additional useful information in per-channel
registers in addition the the architectural status/addr/misc
logged in the machine check bank.
Pick up this information and add it to the EDAC log:
retry_rd_err_[five 32-bit register values]
Sorry, no definitions for these registers. OEMs and DIMM vendors
will be able to use them to isolate which cells in the DIMM are
causing problems.
correrrcnt[per rank corrected error counts]
Note that if additional errors are logged while these registers are
being read, you may see a jumble of values some from earlier errors,
others from later errors (since the registers report the most recent
logged error). The correrrcnt registers provide error counts per possible
rank. If these counts only change by one since the previous error logged
for this channel, then it is safe to assume that the registers logged
provide a coherent view of one error.
With this change EDAC logs look like this:
EDAC MC4: 1 CE memory read error on CPU_SrcID#2_MC#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x8f26018 offset:0x0 grain:32 syndrome:0x0 - err_code:0x0101:0x0091 socket:2 imc:0 rank:0 bg:0 ba:0 row:0x1f880 col:0x200 retry_rd_err_log[0001a209 00000000 00000001 04800001 0001f880] correrrcnt[0001 0000 0000 0000 0000 0000 0000 0000])
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The source ID register offset for Skylake server is 0xf0, while for
Icelake server is 0xf8. Pass the correct offset to get the source ID.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The following Kconfig constellations fail randconfig builds:
CONFIG_ACPI_NFIT=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_SKX=m
CONFIG_EDAC_I10NM=y
or
CONFIG_ACPI_NFIT=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_SKX=y
CONFIG_EDAC_I10NM=m
with:
...
CC [M] drivers/edac/skx_common.o
...
.../skx_common.o:.../skx_common.c:672: undefined reference to `__this_module'
That is because if one of the two drivers - skx_edac or i10nm_edac - is
built-in and the other one is a module, the shared file skx_common.c
gets linked into a module object by kbuild. Therefore, when linking that
same file into vmlinux, the '__this_module' symbol used in debugfs isn't
defined, leading to the above error.
Fix it by moving all debugfs code from skx_common.c to both skx_base.c
and i10nm_base.c respectively. Thus, skx_common.c doesn't refer to the
'__this_module' symbol anymore.
Clarify skx_common.c's purpose at the top of the file for future
reference, while at it.
[ bp: Make text more readable. ]
Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190321221339.GA32323@agluck-desk
|
|
Parts of skx_edac can be shared with the Intel 10nm server EDAC driver.
Carve out the common parts from skx_edac in preparation to support both
skx_edac driver and i10nm_edac drivers.
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-3-tony.luck@intel.com
|
