| Age | Commit message (Collapse) | Author |
|---|
|
Certain operations on memory, such as memory repair, are permitted
only when the address and other attributes for the operation are
from the current boot. This is determined by checking whether the
memory attributes for the operation match those in the CXL gen_media
or CXL DRAM memory event records reported during the current boot.
The CXL event records must be backed up because they are cleared
in the hardware after being processed by the kernel.
Support is added for storing CXL gen_media or CXL DRAM memory event
records in xarrays. Old records are deleted when they expire or when
there is an overflow and which depends on platform correctly report
Event Record Timestamp field of CXL spec Table 8-55 Common Event
Record Format.
Additionally, helper functions are implemented to find a matching
record in the xarray storage based on the memory attributes and
repair type.
Add validity check, when matching attributes for sparing, using
the validity flag in the DRAM event record, to ensure that all
required attributes for a requested repair operation are valid and
set.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-7-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add support for PERFORM_MAINTENANCE command.
CXL spec 3.2 section 8.2.10.7.1 describes the Perform Maintenance command.
This command requests the device to execute the maintenance operation
specified by the maintenance operation class and the maintenance operation
subclass.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-6-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
CXL spec 3.2 section 8.2.10.9.11.1 describes the device patrol scrub
control feature. The device patrol scrub proactively locates and makes
corrections to errors in regular cycle.
Allow specifying the number of hours within which the patrol scrub must be
completed, subject to minimum and maximum limits reported by the device.
Also allow disabling scrub allowing trade-off error rates against
performance.
Add support for patrol scrub control on CXL memory devices.
Register with the EDAC device driver, which retrieves the scrub attribute
descriptors from EDAC scrub and exposes the sysfs scrub control attributes
to userspace. For example, scrub control for the CXL memory device
"cxl_mem0" is exposed in /sys/bus/edac/devices/cxl_mem0/scrubX/.
Additionally, add support for region-based CXL memory patrol scrub control.
CXL memory regions may be interleaved across one or more CXL memory
devices. For example, region-based scrub control for "cxl_region1" is
exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
[dj: A few formatting fixes from Jonathan]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-4-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add CXL Features support. Setup code for enabling in kernel usage of CXL
Features. Expecting EDAC/RAS to utilize CXL Features in kernel for
things such as memory sparing. Also prepartion for enabling of CXL FWCTL
support to issue allowed Features from user space.
|
|
Add support for Extended Linear Cache for CXL. Add enumeration support
of the cache. Add MCE notification of the aliased memory address.
|
|
Add support for Global Persistent Flush (GPF) and dirty shutdown
accounting.
|
|
Similar to how the acpi_nfit driver exports Optane dirty shutdown count,
introduce:
/sys/bus/cxl/devices/nvdimm-bridge0/ndbusX/nmemY/cxl/dirty_shutdown
Under the conditions that 1) dirty shutdown can be set, 2) Device GPF
DVSEC exists, and 3) the count itself can be retrieved.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250220220235.276831-4-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
... to a better suited 'cxl_arm_dirty_shutdown()'.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250220220235.276831-3-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add support for GPF flows. It is found that the CXL specification
around this to be a bit too involved from the driver side. And while
this should really all handled by the hardware, this patch takes
things with a grain of salt.
Upon respective port enumeration, both phase timeouts are set to
a max of 20 seconds, which is the NMI watchdog default for lockup
detection. The premise is that the kernel does not have enough
information to set anything better than a max across the board
and hope devices finish their GPF flows within the platform energy
budget.
Timeout detection is based on dirty Shutdown semantics. The driver
will mark it as dirty, expecting that the device clear it upon a
successful GPF event. The admin may consult the device Health and
check the dirty shutdown counter to see if there was a problem
with data integrity.
[ davej: Explicitly set return to 0 in update_gpf_port_dvsec() ]
[ davej: Add spec reference for 'struct cxl_mbox_set_shutdown_state_in ]
[ davej: Fix 0-day reported issue ]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250124233533.910535-1-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The next volatile and next persistent values are unused and are
cluttering the cxl_memdev_state.
Remove these values.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250206-cxl-cleanup-v1-1-9ddf26dd8433@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Below is a setup with extended linear cache configuration with an example
layout of memory region shown below presented as a single memory region
consists of 256G memory where there's 128G of DRAM and 128G of CXL memory.
The kernel sees a region of total 256G of system memory.
128G DRAM 128G CXL memory
|-----------------------------------|-------------------------------------|
Data resides in either DRAM or far memory (FM) with no replication. Hot
data is swapped into DRAM by the hardware behind the scenes. When error is
detected in one location, it is possible that error also resides in the
aliased location. Therefore when a memory location that is flagged by MCE
is part of the special region, the aliased memory location needs to be
offlined as well.
Add an mce notify callback to identify if the MCE address location is part
of an extended linear cache region and handle accordingly.
Added symbol export to set_mce_nospec() in x86 code in order to call
set_mce_nospec() from the CXL MCE notify callback.
Link: https://lore.kernel.org/linux-cxl/668333b17e4b2_5639294fd@dwillia2-xfh.jf.intel.com.notmuch/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250226162224.3633792-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
CXL spec r3.2 8.2.9.6.1 Get Supported Features (Opcode 0500h)
The command retrieve the list of supported device-specific features
(identified by UUID) and general information about each Feature.
The driver will retrieve the Feature entries in order to make checks and
provide information for the Get Feature and Set Feature command. One of
the main piece of information retrieved are the effects a Set Feature
command would have for a particular feature. The retrieved Feature
entries are stored in the cxl_mailbox context.
The setup of Features is initiated via devm_cxl_setup_features() during the
pci probe function before the cxl_memdev is enumerated.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250220194438.2281088-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add feature commands enumeration code in order to detect and enumerate
the 3 feature related commands "get supported features", "get feature",
and "set feature". The enumeration will help determine whether the driver
can issue any of the 3 commands to the device.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250220194438.2281088-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
With 'struct cxl_mailbox' context introduced, the helper functions
cxl_query_cmd() and cxl_send_cmd() can take a cxl_mailbox directly
rather than a cxl_memdev parameter. Refactor to use cxl_mailbox
directly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250204220430.4146187-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Now that the 'struct cxl_dpa_partition' array contains both size and
performance information, all paths that iterate over that information
can use a loop rather than hard-code 'ram' and 'pmem' lookups.
Remove, or reduce the scope of the temporary helpers that bridged the
pre-'struct cxl_dpa_partition' state of the code to the post-'struct
cxl_dpa_partition' state.
- to_{ram,pmem}_perf(): scope reduced to just sysfs_emit + is_visible()
helpers
- to_{ram,pmem}_res(): fold into their only users cxl_{ram,pmem}_size()
- cxl_ram_size(): scope reduced to ram_size_show() (Note,
cxl_pmem_size() also used to gate nvdimm registration)
In short, memdev sysfs ABI already made the promise that 0-sized
partitions will show for memdevs, but that can be avoided for future
partitions by using dynamic sysfs group visibility (new relative to when
the partition ABI first shipped upstream).
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alejandro Lucero <alucerop@amd.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864307519.668823.10800104022426067621.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Now that the operational mode of DPA capacity (ram vs pmem... etc) is
tracked in the partition, and no code paths have dependencies on the
mode implying the partition index, the ambiguous 'enum cxl_decoder_mode'
can be cleaned up, specifically this ambiguity on whether the operation
mode implied anything about the partition order.
Endpoint decoders simply reference their assigned partition where the
operational mode can be retrieved as partition mode.
With this in place PMEM can now be partition0 which happens today when
the RAM capacity size is zero. Dynamic RAM can appear above PMEM when
DCD arrives, etc. Code sequences that hard coded the "PMEM after RAM"
assumption can now just iterate partitions and consult the partition
mode after the fact.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864306972.668823.3327008645125276726.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
cxl_dpa_alloc() is a hard coded nest of assumptions around PMEM
allocations being distinct from RAM allocations in specific ways when in
practice the allocation rules are only relative to DPA partition index.
The rules for cxl_dpa_alloc() are:
- allocations can only come from 1 partition
- if allocating at partition-index-N, all free space in partitions less
than partition-index-N must be skipped over
Use the new 'struct cxl_dpa_partition' array to support allocation with
an arbitrary number of DPA partitions on the device.
A follow-on patch can go further to cleanup 'enum cxl_decoder_mode'
concept and supersede it with looking up the memory properties from
partition metadata. Until then cxl_part_mode() temporarily bridges code
that looks up partitions by @cxled->mode.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864306400.668823.12143134425285426523.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The pending efforts to add CXL Accelerator (type-2) device [1], and
Dynamic Capacity (DCD) support [2], tripped on the
no-longer-fit-for-purpose design in the CXL subsystem for tracking
device-physical-address (DPA) metadata. Trip hazards include:
- CXL Memory Devices need to consider a PMEM partition, but Accelerator
devices with CXL.mem likely do not in the common case.
- CXL Memory Devices enumerate DPA through Memory Device mailbox
commands like Partition Info, Accelerators devices do not.
- CXL Memory Devices that support DCD support more than 2 partitions.
Some of the driver algorithms are awkward to expand to > 2 partition
cases.
- DPA performance data is a general capability that can be shared with
accelerators, so tracking it in 'struct cxl_memdev_state' is no longer
suitable.
- Hardcoded assumptions around the PMEM partition always being index-1
if RAM is zero-sized or PMEM is zero sized.
- 'enum cxl_decoder_mode' is sometimes a partition id and sometimes a
memory property, it should be phased in favor of a partition id and
the memory property comes from the partition info.
Towards cleaning up those issues and allowing a smoother landing for the
aforementioned pending efforts, introduce a 'struct cxl_dpa_partition'
array to 'struct cxl_dev_state', and 'struct cxl_range_info' as a shared
way for Memory Devices and Accelerators to initialize the DPA information
in 'struct cxl_dev_state'.
For now, split a new cxl_dpa_setup() from cxl_mem_create_range_info() to
get the new data structure initialized, and cleanup some qos_class init.
Follow on patches will go further to use the new data structure to
cleanup algorithms that are better suited to loop over all possible
partitions.
cxl_dpa_setup() follows the locking expectations of mutating the device
DPA map, and is suitable for Accelerator drivers to use. Accelerators
likely only have one hardcoded 'ram' partition to convey to the
cxl_core.
Link: http://lore.kernel.org/20241230214445.27602-1-alejandro.lucero-palau@amd.com [1]
Link: http://lore.kernel.org/20241210-dcd-type2-upstream-v8-0-812852504400@intel.com [2]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305827.668823.13978794102080021276.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation for consolidating all DPA partition information into an
array of DPA metadata, introduce helpers that hide the layout of the
current data. I.e. make the eventual replacement of ->ram_res,
->pmem_res, ->ram_perf, and ->pmem_perf with a new DPA metadata array a
no-op for code paths that consume that information, and reduce the noise
of follow-on patches.
The end goal is to consolidate all DPA information in 'struct
cxl_dev_state', but for now the helpers just make it appear that all DPA
metadata is relative to @cxlds.
As the conversion to generic partition metadata walking is completed,
these helpers will naturally be eliminated, or reduced in scope.
Cc: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305238.668823.16553986866633608541.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Keep the access_coordinate from the CDAT tables for region perf
calculations. The region perf calculation requires all participating
endpoints to have arrived in order to determine if there are limitations
of bandwidth data due to shared uplink.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20240904001316.1688225-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
With the CXL mailbox context split out, cxl_internal_send_cmd() can take
'struct cxl_mailbox' as an input parameter rather than
'struct memdev_dev_state'. Change input parameter for
cxl_internal_send_cmd() and fixup all impacted call sites.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Create a new 'struct cxl_mailbox' and move all mailbox related bits to
it. This allows isolation of all CXL mailbox data in order to export
some of the calls to external kernel callers and avoid exporting of CXL
driver specific bits such has device states. The allocation of
'struct cxl_mailbox' is also split out with cxl_mailbox_init() so the
mailbox can be created independently.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Group all cxl related kernel headers into include/cxl/ directory.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
|
|
The CXL driver provides a debugfs interface offering users the
ability to inject and clear poison to a memdev. Once a user has
injected up to the devices limit further injection requests fail
with ENXIO until a clear poison is issued.
Users may not have device specs in hand or may want to intentionally
hit the limit and then clear. Replace the usual ENXIO return status
with EBUSY so users can recognize this failure.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/825bd4c67fb55a4373c4182d999ad49d4e6b4fe7.1720316188.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
When user send a mbox command whose opcode is CXL_MBOX_OP_CLEAR_LOG and
the in_payload is normal vendor debug log UUID according to
the CXL specification cxl_payload_from_user_allowed() will return
false unexpectedly, Sending mbox cmd operation fails and the kernel
log will print:
Clear Log: input payload not allowed.
All CXL devices that support a debug log shall support the Vendor Debug
Log to allow the log to be accessed through a common host driver, for any
device, all versions of the CXL specification define the same value with
Log Identifier of: 5e1819d9-11a9-400c-811f-d60719403d86
Refer to CXL spec r3.1 Table 8-71
Fix the definition value of DEFINE_CXL_VENDOR_DEBUG_UUID to match the
CXL specification.
Fixes: 472b1ce6e9d6 ("cxl/mem: Enable commands via CEL")
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240710023112.8063-1-engguopeng@buaa.edu.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add the missing files into cxl driver api and fix the compile warning.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-3-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Adding UAPI support for CXL r3.1 8.2.9.5.4
Clear Log command.
This proposed patch will be useful for clearing and populating
the Vendor debug log in certain scenarios, allowing for the
aggregation of results over time.
Signed-off-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240313071218.729-3-sthanneeru.opensrc@micron.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Adding UAPI support for
1. CXL r3.1 8.2.9.5.3 Get Log Capabilities.
2. CXL r3.1 8.2.9.5.6 Get Supported Logs Sub-List.
Signed-off-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240313071218.729-2-sthanneeru.opensrc@micron.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The driver stores access_coordinate for host bridge in ->hb_coord and
switch CDAT access_coordinate in ->sw_coord. Since neither of these
access_coordinate clobber each other, the variable name can be consolidated
into ->coord to simplify the code.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
cxl_dpa_perf'
In order to address the issue with being able to expose qos_class sysfs
attributes under 'ram' and 'pmem' sub-directories, the attributes must
be defined as static attributes rather than under driver->dev_groups.
To avoid implementing locking for accessing the 'struct cxl_dpa_perf`
lists, convert the list to a single 'struct cxl_dpa_perf' entry in
preparation to move the attributes to statically defined.
While theoretically a partition may have multiple qos_class via CDAT, this
has not been encountered with testing on available hardware. The code is
simplified for now to not support the complex case until a use case is
needed to support that.
Link: https://lore.kernel.org/linux-cxl/65b200ba228f_2d43c29468@dwillia2-mobl3.amr.corp.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240206190431.1810289-2-dave.jiang@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Pick up the CPER to CXL driver integration work for v6.8. Some
additional cleanup of cper_estatus_print() messages is needed, but that
is to be handled incrementally.
|
|
If the firmware has configured CXL event support to be firmware first
the OS can process those events through CPER records. The CXL layer has
unique DPA to HPA knowledge and standard event trace parsing in place.
CPER records contain Bus, Device, Function information which can be used
to identify the PCI device which is sending the event.
Change the PCI driver registration to include registration of a CXL
CPER callback to process events through the trace subsystem.
Use new scoped based management to simplify the handling of the PCI
device object.
Tested-by: Smita-Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Smita-Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-9-1bb8a4ca2c7a@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
[djbw: use new pci_dev guard, flip init order]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Dan points out in review that the cxl_test code could be made better
through the use of UUID's defines rather than being open coded.[1]
Create UUID defines and use them rather than open coding them.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: http://lore.kernel.org/r/65738d09e30e2_45e0129451@dwillia2-xfh.jf.intel.com.notmuch [1]
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-3-1bb8a4ca2c7a@intel.com
[djbw: clang-format uuid definitions]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
UEFI code can process CXL events through CPER records. Those records
use almost the same format as the CXL events.
Lift the CXL event structures to a core header to be shared in later
patches.
[jic123: drop "CXL rev 3.0" mention]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-2-1bb8a4ca2c7a@intel.com
[djbw: add F: entry to maintainers for include/linux/cxl-event.h]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Pick up the CDAT parsing and QOS class infrastructure for v6.8.
|
|
Once the QTG ID _DSM is executed successfully, the QTG ID is retrieved from
the return package. Create a list of entries in the cxl_memdev context and
store the QTG ID as qos_class token and the associated DPA range. This
information can be exposed to user space via sysfs in order to help region
setup for hot-plugged CXL memory devices.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319625109.2212653.11872111896220384056.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add the call to the UAPI such that userspace may corelate the
timestamps from the device log with system wall time, if, for
example there's any sort of inaccuracy or skew in the device.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230829152014.15452-1-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Restricted CXL Host (RCH) Error Handling undoes the topology munging of
CXL 1.1 to enabled some AER recovery, and lands some base infrastructure
for handling Root-Complex-Event-Collectors (RCECs) with CXL. Include
this long running series finally for v6.7.
|
|
The Component Register base address @component_reg_phys is no longer
used after the rework of the Component Register setup which now uses
struct member @reg_map instead. Remove the base address.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-9-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_dev_state
Same as for ports and dports, also store the endpoint's Component
Register mappings, use struct cxl_dev_state for that.
Keep the Component Register base address @component_reg_phys a bit to
not break functionality. It will be removed after the transition in a
later patch.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-7-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The sanitize operation is destructive and the expectation is that the
device is unmapped while in progress. The current implementation does a
lockless check for decoders being active, but then does nothing to
prevent decoders from racing to be committed. Introduce state tracking
to resolve this race.
This incidentally cleans up unpriveleged userspace from triggering mmio
read cycles by spinning on reading the 'security/state' attribute. Which
at a minimum is a waste since the kernel state machine can cache the
completion result.
Lastly cxl_mem_sanitize() was mistakenly marked EXPORT_SYMBOL() in the
original implementation, but an export was never required.
Fixes: 0c36b6ad436a ("cxl/mbox: Add sanitization handling machinery")
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fix a race condition between the mailbox-background command interrupt
firing and the security-state sysfs attribute being removed.
The race is difficult to see due to the awkward placement of the
sanitize-notifier setup code and the multiple places the teardown calls
are made, cxl_memdev_security_init() and cxl_memdev_security_shutdown().
Unify setup in one place, cxl_sanitize_setup_notifier(). Arrange for
the paired cxl_sanitize_teardown_notifier() to safely quiet the notifier
and let the cxl_memdev + irq be unregistered later in the flow.
Note: The special wrinkle of the sanitize notifier is that it interacts
with interrupts, which are enabled early in the flow, and it interacts
with memdev sysfs which is not initialized until late in the flow. Hence
why this setup routine takes an @cxlmd argument, and not just @mds.
This fix is also needed as a preparation fix for a memdev unregistration
crash.
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20230929100316.00004546@Huawei.com
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Fixes: 0c36b6ad436a ("cxl/mbox: Add sanitization handling machinery")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
It is all too easy to get confused about @dev usage in the CXL driver
stack. Before adding a new cxl_pci_probe() setup operation that has a
devm lifetime dependent on @cxlds->dev binding, but also references
@cxlmd->dev, and prints messages, rework the devm_cxl_add_memdev() and
cxl_memdev_setup_fw_upload() function signatures to make this
distinction explicit. I.e. pass in the devm context as an @host argument
rather than infer it from other objects.
This is in preparation for adding a devm_cxl_sanitize_setup_notifier().
Note the whitespace fixup near the change of the devm_cxl_add_memdev()
signature. That uncaught typo originated in the patch that added
cxl_memdev_security_init().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for fixing the init/teardown of the 'sanitize' workqueue
and sysfs notification mechanism, arrange for cxl_mbox_sanitize_work()
to be the single location where the sysfs attribute is notified. With
that change there is no distinction between polled mode and interrupt
mode. All the interrupt does is accelerate the polling interval.
The change to check for "mds->security.sanitize_node" under the lock is
there to ensure that the interrupt, the work routine and the
setup/teardown code can all have a consistent view of the registered
notifier and the workqueue state. I.e. the expectation is that the
interrupt is live past the point that the sanitize sysfs attribute is
published, and it may race teardown, so it must be consulted under a
lock. Given that new locking requirement, cxl_pci_mbox_irq() is moved
from hard to thread irq context.
Lastly, some opportunistic replacements of
"queue_delayed_work(system_wq, ...)", which is just open coded
schedule_delayed_work(), are included.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
If the device does not support Sanitize or Secure Erase commands,
hide the respective sysfs interfaces such that the operation can
never be attempted.
In order to be generic, keep track of the enabled security commands
found in the CEL - the driver does not support Security Passthrough.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230726051940.3570-4-dave@stgolabs.net
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
... as is the case with all members of struct cxl_memdev_state.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230726051940.3570-3-dave@stgolabs.net
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
The CXL_FW_CANCEL macro is used with set/test_bit() so it should be a
bit number and not the shifted value. The original code is the
equivalent of using BIT(BIT(0)) so it's 0x2 instead of 0x1. This has
no effect on runtime because it's done consistently and nothing else
was using the 0x2 bit.
Fixes: 9521875bbe00 ("cxl: add a firmware update mechanism using the sysfs firmware loader")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/a11b0c78-4717-4f4e-90be-f47f300d607c@moroto.mountain
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
Pick up the first half of the RCH error handling series. The back half
needs some fixups for test regressions. Small conflicts with the PMU
work around register enumeration and setup helpers.
|
