| Age | Commit message (Collapse) | Author |
|---|
|
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. apple_soc_cpufreq_get_rate() does not check
for this case, which results in a NULL pointer dereference.
Fixes: 6286bbb40576 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The boost feature can be controlled at two levels currently, driver
level (applies to all policies) and per-policy.
Currently the driver enables driver level boost support from the
per-policy ->init() callback, which isn't really efficient as that gets
called for each policy and then there is online/offline path too where
this gets done unnecessarily.
Instead set the .set_boost field directly and always enable the boost
support. If a policy doesn't support boost feature, the core will not
enable it for that policy.
Keep the initial state of driver level boost to disabled and let the
user enable it if required as ideally the boost frequencies must be used
only when really required.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
These SoCs only use 3 bits for p-states, and have a different
APPLE_DVFS_CMD_PS1 mask value.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
APPLE_DVFS_TRANSITION_TIMEOUT
The driver already assumes transitions will not take longer than
APPLE_DVFS_TRANSITION_TIMEOUT in apple_soc_cpufreq_set_target(), so it
makes little sense to set CPUFREQ_ETERNAL as the transition latency
when the transistion latency is not given by the opp-table.
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Apple A11 SoC takes a long time to switch. Maximum switch time
observed is 345us, so increase the cluster switch timeout to 400us
to be safe.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Apple A7-A9(X) SoCs requires 32-bit reads on the status register. Newer
SoCs accepts 32-bit reads on the status register as well.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Support for SoC that has a different APPLE_DVFS_CMD_PS1 will be added soon,
so modify the driver first to allow it to be configured per-SoC.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Newer device do not use this. It is not known what this field does,
but change the behavior to be same as macOS to be safe.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
!CONFIG_OF builds cause warnings on unused of_device_id tables. This is
due to of_match_node() being a macro rather than static inline function.
Add a __maybe_unused annotation to the of_device_id tables.
Fixes: c7582ec85342 ("cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm drivers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408090714.wcrqU6Pk-lkp@intel.com/
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The cpufreq core doesn't check the return type of the exit() callback
and there is not much the core can do on failures at that point. Just
drop the returned value and make it return void.
Signed-off-by: Lizhe <sensor1010@163.com>
[ Viresh: Reworked the patches to fix all missing changes together. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Mediatek
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # scpi, scmi, vexpress
Acked-by: Mario Limonciello <mario.limonciello@amd.com> # amd
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # bmips
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com> # omap
|
|
The of_iomap() function returns NULL if it fails. It never returns
error pointers. Fix the check accordingly.
Fixes: 6286bbb40576 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Without this, the CPUs are left in a random pstate. Since we don't
support deep idle yet (which powers down the CPUs), this results in
significantly increased idle power consumption in suspend.
Fixes: 6286bbb40576 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
When -Woverride-init is enabled, gcc notices that the .attr
field is initialized twice:
drivers/cpufreq/apple-soc-cpufreq.c:331:27: error: initialized field overwritten [-Werror=override-init]
331 | .attr = apple_soc_cpufreq_hw_attr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Remove the first one, since this is not actually used.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This driver implements CPU frequency scaling for Apple Silicon SoCs,
including M1 (t8103), M1 Max/Pro/Ultra (t600x), and M2 (t8112).
Each CPU cluster has its own register set, and frequency management is
fully automated by the hardware; the driver only has to write one
register. There is boost frequency support, but the hardware will only
allow their use if only a subset of cores in a cluster are in
non-deep-idle. Since we don't support deep idle yet, these frequencies
are not achievable, but the driver supports them. They will remain
disabled in the device tree until deep idle is implemented, to avoid
confusing users.
This driver does not yet implement the memory controller performance
state tuning that usually accompanies higher CPU p-states. This will be
done in a future patch.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
