| Age | Commit message (Collapse) | Author |
|---|
|
The video driver will be using the newly introduced
dev_pm_genpd_set_hwmode() API to switch the video GDSC to HW and SW
control modes at runtime.
Hence use HW_CTRL_TRIGGER flag instead of HW_CTRL for video GDSC's for
Qualcomm SoC SC7180, SDM845, SM7150, SM8150 and SM8450.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Link: https://lore.kernel.org/r/20250530-switch_gdsc_mode-v5-1-657c56313351@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Video PLLs on SM8450/SM8475 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move runtime power management, PLL
configuration and enable critical clocks to qcom_cc_really_probe() which
ensures all required power domains are in enabled state before configuring
the PLLs or enabling the clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-7-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-4-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support to the SM8475 video clock controller by extending the
SM8450 video clock controller, which is almost identical but has some
minor differences.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240818204348.197788-9-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The previous wrapper qcom_cc_really_probe takes the platform
device as parameter, which is limited to platform driver.
As for qca8k clock controller driver, which is registered as
the MDIO device, which also follows the qcom clock framework.
To commonize qcom_cc_really_probe, updating it to take the
struct device as parameter, so that the qcom_cc_really_probe
can be utilized by the previous platform device and the new
added MDIO device.
Also update the current clock controller drivers to take
&pdev->dev as parameter when calling qcom_cc_really_probe.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Instead of magically poking at the bit0 of branch clocks' CBCR, use
the newly introduced helper.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-2-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There is no need to register video clock controllers during subsys init
calls. Use module_platform_driver() instead.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-4-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some Venus resets may require more time when toggling. Describe that.
The value is known for SM8450, see [1].
[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/d0730ea5867264ee50b793f6700eb6a376ddcbbb
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-17-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for the video clock controller driver for peripheral clock
clients to be able to request for video cc clocks.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524140656.7076-3-quic_tdas@quicinc.com
|
