summaryrefslogtreecommitdiff
path: root/drivers/char/tpm/tpm-interface.c
AgeCommit message (Collapse)Author
7 daystpm: Check for completion after timeoutJarkko Sakkinen
The current implementation of timeout detection works in the following way: 1. Read completion status. If completed, return the data 2. Sleep for some time (usleep_range) 3. Check for timeout using current jiffies value. Return an error if timed out 4. Goto 1 usleep_range doesn't guarantee it's always going to wake up strictly in (min, max) range, so such a situation is possible: 1. Driver reads completion status. No completion yet 2. Process sleeps indefinitely. In the meantime, TPM responds 3. We check for timeout without checking for the completion again. Result is lost. Such a situation also happens for the guest VMs: if vCPU goes to sleep and doesn't get scheduled for some time, the guest TPM driver will timeout instantly after waking up without checking for the completion (which may already be in place). Perform the completion check once again after exiting the busy loop in order to give the device the last chance to send us some data. Since now we check for completion in two places, extract this check into a separate function. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Reviewed-by: Jonathan McDowell <noodles@meta.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
7 daystpm: support devices with synchronous send()Stefano Garzarella
Some devices do not support interrupts and provide a single synchronous operation to send the command and receive the response on the same buffer. Currently, these types of drivers must use an internal buffer where they temporarily store the response between .send() and .recv() calls. Introduce a new flag (TPM_CHIP_FLAG_SYNC) to support synchronous send(). If that flag is set by the driver, tpm_try_transmit() will use the send() callback to send the command and receive the response on the same buffer synchronously. In that case send() return the number of bytes of the response on success, or -errno on failure. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
7 daystpm: add bufsiz parameter in the .send callbackStefano Garzarella
Add a new `bufsiz` parameter to the `.send` callback in `tpm_class_ops`. This parameter will allow drivers to differentiate between the actual command length to send and the total buffer size. Currently `bufsiz` is not used, but it will be used to implement devices with synchronous send() to send the command and receive the response on the same buffer. Also rename the previous parameter `len` to `cmd_len` in the declaration to make it clear that it contains the length in bytes of the command stored in the buffer. The semantics don't change and it can be used as before by drivers. This is an optimization since the drivers could get it from the header, but let's avoid duplicating code. While we are here, resolve a checkpatch warning: WARNING: Unnecessary space before function pointer arguments #66: FILE: include/linux/tpm.h:90: + int (*send) (struct tpm_chip *chip, u8 *buf, size_t bufsiz, Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-03-27tpm: Make chip->{status,cancel,req_canceled} optJarkko Sakkinen
tpm_ftpm_tee does not require chip->status, chip->cancel and chip->req_canceled. Make them optional. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-03-27tpm: do not start chip while suspendedThadeu Lima de Souza Cascardo
Checking TPM_CHIP_FLAG_SUSPENDED after the call to tpm_find_get_ops() can lead to a spurious tpm_chip_start() call: [35985.503771] i2c i2c-1: Transfer while suspended [35985.503796] WARNING: CPU: 0 PID: 74 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xbe/0x810 [35985.503802] Modules linked in: [35985.503808] CPU: 0 UID: 0 PID: 74 Comm: hwrng Tainted: G W 6.13.0-next-20250203-00005-gfa0cb5642941 #19 9c3d7f78192f2d38e32010ac9c90fdc71109ef6f [35985.503814] Tainted: [W]=WARN [35985.503817] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023 [35985.503819] RIP: 0010:__i2c_transfer+0xbe/0x810 [35985.503825] Code: 30 01 00 00 4c 89 f7 e8 40 fe d8 ff 48 8b 93 80 01 00 00 48 85 d2 75 03 49 8b 16 48 c7 c7 0a fb 7c a7 48 89 c6 e8 32 ad b0 fe <0f> 0b b8 94 ff ff ff e9 33 04 00 00 be 02 00 00 00 83 fd 02 0f 5 [35985.503828] RSP: 0018:ffffa106c0333d30 EFLAGS: 00010246 [35985.503833] RAX: 074ba64aa20f7000 RBX: ffff8aa4c1167120 RCX: 0000000000000000 [35985.503836] RDX: 0000000000000000 RSI: ffffffffa77ab0e4 RDI: 0000000000000001 [35985.503838] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [35985.503841] R10: 0000000000000004 R11: 00000001000313d5 R12: ffff8aa4c10f1820 [35985.503843] R13: ffff8aa4c0e243c0 R14: ffff8aa4c1167250 R15: ffff8aa4c1167120 [35985.503846] FS: 0000000000000000(0000) GS:ffff8aa4eae00000(0000) knlGS:0000000000000000 [35985.503849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [35985.503852] CR2: 00007fab0aaf1000 CR3: 0000000105328000 CR4: 00000000003506f0 [35985.503855] Call Trace: [35985.503859] <TASK> [35985.503863] ? __warn+0xd4/0x260 [35985.503868] ? __i2c_transfer+0xbe/0x810 [35985.503874] ? report_bug+0xf3/0x210 [35985.503882] ? handle_bug+0x63/0xb0 [35985.503887] ? exc_invalid_op+0x16/0x50 [35985.503892] ? asm_exc_invalid_op+0x16/0x20 [35985.503904] ? __i2c_transfer+0xbe/0x810 [35985.503913] tpm_cr50_i2c_transfer_message+0x24/0xf0 [35985.503920] tpm_cr50_i2c_read+0x8e/0x120 [35985.503928] tpm_cr50_request_locality+0x75/0x170 [35985.503935] tpm_chip_start+0x116/0x160 [35985.503942] tpm_try_get_ops+0x57/0x90 [35985.503948] tpm_find_get_ops+0x26/0xd0 [35985.503955] tpm_get_random+0x2d/0x80 Don't move forward with tpm_chip_start() inside tpm_try_get_ops(), unless TPM_CHIP_FLAG_SUSPENDED is not set. tpm_find_get_ops() will return NULL in such a failure case. Fixes: 9265fed6db60 ("tpm: Lock TPM chip in tpm_pm_suspend() first") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Cc: stable@vger.kernel.org Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Mike Seo <mikeseohyungjin@gmail.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-11-04tpm: Lock TPM chip in tpm_pm_suspend() firstJarkko Sakkinen
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy according, as this leaves window for tpm_hwrng_read() to be called while the operation is in progress. The recent bug report gives also evidence of this behaviour. Aadress this by locking the TPM chip before checking any chip->flags both in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED check inside tpm_get_random() so that it will be always checked only when the lock is reserved. Cc: stable@vger.kernel.org # v6.4+ Fixes: 99d464506255 ("tpm: Prevent hwrng from activating during resume") Reported-by: Mike Seo <mikeseohyungjin@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219383 Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Mike Seo <mikeseohyungjin@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-10-29tpm: Lazily flush the auth sessionJarkko Sakkinen
Move the allocation of chip->auth to tpm2_start_auth_session() so that this field can be used as flag to tell whether auth session is active or not. Instead of flushing and reloading the auth session for every transaction separately, keep the session open unless /dev/tpm0 is used. Reported-by: Pengyu Ma <mapengyu@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219229 Cc: stable@vger.kernel.org # v6.10+ Fixes: 7ca110f2679b ("tpm: Address !chip->auth in tpm_buf_append_hmac_session*()") Tested-by: Pengyu Ma <mapengyu@gmail.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-09tpm: Store the length of the tpm_buf data separately.Jarkko Sakkinen
TPM2B buffers, or sized buffers, have a two byte header, which contains the length of the payload as a 16-bit big-endian number, without counting in the space taken by the header. This differs from encoding in the TPM header where the length includes also the bytes taken by the header. Unbound the length of a tpm_buf from the value stored to the TPM command header. A separate encoding and decoding step so that different buffer types can be supported, with variant header format and length encoding. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-09tpm: Remove tpm_send()Jarkko Sakkinen
Open code the last remaining call site for tpm_send(). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-03-06Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"Ahelenia Ziemiańska
Found with git grep 'MODULE_AUTHOR(".*([^)]*@' Fixed with sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \ $(git grep -l 'MODULE_AUTHOR(".*([^)]*@') Also: in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc"; this is what every other MODULE_AUTHOR for this company says, and it's what the header says in drivers/sbus/char/openprom.c normalise a double-spaced separator; this is clearly copied from the copyright header, where the names are aligned on consecutive lines thusly: * Linux/SPARC PROM Configuration Driver * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) but the authorship branding is single-line Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-05tpm: make all 'class' structures constIvan Orlov
Now that the driver core allows for struct class to be in read-only memory, making all 'class' structures to be declared at build time placing them into read-only memory, instead of having to be dynamically allocated at load time. Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-integrity@vger.kernel.org Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230620144642.584926-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16tpm: Prevent hwrng from activating during resumeJarkko Sakkinen
Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero bytes. This prevents hwrng from racing during resume. Cc: stable@vger.kernel.org Fixes: 6e592a065d51 ("tpm: Move Linux RNG connection to hwrng") Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-03-21tpm: Fix a possible dereference of ERR_PTR in tpm_init()Harshit Mogalapalli
Smatch reports: drivers/char/tpm/tpm-interface.c:470 tpm_init() error: 'tpm_class' dereferencing possible ERR_PTR() If class_create() returns error pointer, we are dereferencing a possible error pointer. Fix this by moving the dereference post error handling. Fixes: a010eb881243 ("tpm: fix up the tpm_class shutdown_pre pointer when created") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230321061416.626561-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17tpm: fix up the tpm_class shutdown_pre pointer when createdGreg Kroah-Hartman
Do not wait until long after the struct class has been created to set the shutdown_pre pointer for the tpm_class, assign it right away. This is the only in-kernel offender that tries to modify the device->class pointer contents after it has been assigned to a device, so fix that up by doing the function pointer assignment before it is matched with the device. Because of this, the patch should go through the driver core tree to allow later changes to struct device to be possible. Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-integrity@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230313181843.1207845-10-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17driver core: class: remove module * from class_create()Greg Kroah-Hartman
The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-06tpm: Allow system suspend to continue when TPM suspend failsJason A. Donenfeld
TPM 1 is sometimes broken across system suspends, due to races or locking issues or something else that haven't been diagnosed or fixed yet, most likely having to do with concurrent reads from the TPM's hardware random number generator driver. These issues prevent the system from actually suspending, with errors like: tpm tpm0: A TPM error (28) occurred continue selftest ... tpm tpm0: A TPM error (28) occurred attempting get random ... tpm tpm0: Error (28) sending savestate before suspend tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28 tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28 tpm_tis 00:08: PM: failed to suspend: error 28 PM: Some devices failed to suspend, or early wake event detected This issue was partially fixed by 23393c646142 ("char: tpm: Protect tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took directly because the TPM maintainers weren't available. However, it seems like this just addresses the most common cases of the bug, rather than addressing it entirely. So there are more things to fix still, apparently. In lieu of actually fixing the underlying bug, just allow system suspend to continue, so that laptops still go to sleep fine. Later, this can be reverted when the real bug is fixed. Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/ Cc: stable@vger.kernel.org # 6.1+ Reported-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Luigi Semenzato <semenzato@chromium.org> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Altmanninger <aclopte@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-04char: tpm: Protect tpm_pm_suspend with locksJan Dabros
Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. Signed-off-by: Jan Dabros <jsd@semihalf.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/ Cc: stable@vger.kernel.org Fixes: e891db1a18bf ("tpm: turn on TPM on suspend for TPM 1.x") [Jason: reworked commit message, added metadata] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21tpm: fix wrong return value in tpm_pcr_extendTianjia Zhang
For the algorithm that does not match the bank, a positive value EINVAL is returned here. I think this is a typo error. It is necessary to return an error value. Cc: stable@vger.kernel.org # 5.4.x Fixes: 9f75c8224631 ("KEYS: trusted: correctly initialize digests and fix locking issue") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12KEYS: trusted: Move TPM2 trusted keys codeSumit Garg
Move TPM2 trusted keys code to trusted keys subsystem. The reason being it's better to consolidate all the trusted keys code to a single location so that it can be maintained sanely. Also, utilize existing tpm_send() exported API which wraps the internal tpm_transmit_cmd() API. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12tpm: Add a flag to indicate TPM power is managed by firmwareStephen Boyd
On some platforms, the TPM power is managed by firmware and therefore we don't need to stop the TPM on suspend when going to a light version of suspend such as S0ix ("freeze" suspend state). Add a chip flag, TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED, to indicate this so that certain platforms can probe for the usage of this light suspend and avoid touching the TPM state across suspend/resume. Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-25tpm: Wrap the buffer from the caller to tpm_buf in tpm_send()Jarkko Sakkinen
tpm_send() does not give anymore the result back to the caller. This would require another memcpy(), which kind of tells that the whole approach is somewhat broken. Instead, as Mimi suggested, this commit just wraps the data to the tpm_buf, and thus the result will not go to the garbage. Obviously this assumes from the caller that it passes large enough buffer, which makes the whole API somewhat broken because it could be different size than @buflen but since trusted keys is the only module using this API right now I think that this fix is sufficient for the moment. In the near future the plan is to replace the parameters with a tpm_buf created by the caller. Reported-by: Mimi Zohar <zohar@linux.ibm.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: 412eb585587a ("use tpm_buf in tpm_transmit_cmd() as the IO parameter") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
2019-09-25KEYS: trusted: correctly initialize digests and fix locking issueRoberto Sassu
Commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") modifies tpm_pcr_extend() to accept a digest for each PCR bank. After modification, tpm_pcr_extend() expects that digests are passed in the same order as the algorithms set in chip->allocated_banks. This patch fixes two issues introduced in the last iterations of the patch set: missing initialization of the TPM algorithm ID in the tpm_digest structures passed to tpm_pcr_extend() by the trusted key module, and unreleased locks in the TPM driver due to returning from tpm_pcr_extend() without calling tpm_put_ops(). Cc: stable@vger.kernel.org Fixes: 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08tpm: turn on TPM on suspend for TPM 1.xJarkko Sakkinen
tpm_chip_start/stop() should be also called for TPM 1.x devices on suspend. Add that functionality back. Do not lock the chip because it is unnecessary as there are no multiple threads using it when doing the suspend. Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Paul Zimmerman <pauldzim@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-13tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()Roberto Sassu
Currently, tpm_pcr_extend() accepts as an input only a SHA1 digest. This patch replaces the hash parameter of tpm_pcr_extend() with an array of tpm_digest structures, so that the caller can provide a digest for each PCR bank currently allocated in the TPM. tpm_pcr_extend() will not extend banks for which no digest was provided, as it happened before this patch, but instead it requires that callers provide the full set of digests. Since the number of digests will always be chip->nr_allocated_banks, the count parameter has been removed. Due to the API change, ima_pcr_extend() and pcrlock() have been modified. Since the number of allocated banks is not known in advance, the memory for the digests must be dynamically allocated. To avoid performance degradation and to avoid that a PCR extend is not done due to lack of memory, the array of tpm_digest structures is allocated by the users of the TPM driver at initialization time. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Mimi Zohar <zohar@linux.ibm.com> (on x86 for TPM 1.2 & PTT TPM 2.0) Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: retrieve digest size of unknown algorithms with PCR readRoberto Sassu
Currently, the TPM driver retrieves the digest size from a table mapping TPM algorithms identifiers to identifiers defined by the crypto subsystem. If the algorithm is not defined by the latter, the digest size can be retrieved from the output of the PCR read command. The patch modifies the definition of tpm_pcr_read() and tpm2_pcr_read() to pass the desired hash algorithm and obtain the digest size at TPM startup. Algorithms and corresponding digest sizes are stored in the new structure tpm_bank_info, member of tpm_chip, so that the information can be used by other kernel subsystems. tpm_bank_info contains: the TPM algorithm identifier, necessary to generate the event log as defined by Trusted Computing Group (TCG); the digest size, to pad/truncate a digest calculated with a different algorithm; the crypto subsystem identifier, to calculate the digest of event data. This patch also protects against data corruption that could happen in the bus, by checking that the digest size returned by the TPM during a PCR read matches the size of the algorithm passed to tpm2_pcr_read(). For the initial PCR read, when digest sizes are not yet available, this patch ensures that the amount of data copied from the output returned by the TPM does not exceed the size of the array data are copied to. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: rename and export tpm2_digest and tpm2_algorithmsRoberto Sassu
Rename tpm2_* to tpm_* and move the definitions to include/linux/tpm.h so that these can be used by other kernel subsystems (e.g. IMA). Also, set the length of the digest array in tpm_digest to a new constant named TPM_MAX_DIGEST_SIZE, equal to SHA512_DIGEST_SIZE. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: dynamically allocate the allocated_banks arrayRoberto Sassu
This patch renames active_banks (member of tpm_chip) to allocated_banks, stores the number of allocated PCR banks in nr_allocated_banks (new member of tpm_chip), and replaces the static array with a pointer to a dynamically allocated array. tpm2_get_pcr_allocation() determines if a PCR bank is allocated by checking the mask in the TPML_PCR_SELECTION structure returned by the TPM for TPM2_Get_Capability(). If a bank is not allocated, the TPM returns that bank in TPML_PCR_SELECTION, with all bits in the mask set to zero. In this case, the bank is not included in chip->allocated_banks, to avoid that TPM driver users unnecessarily calculate a digest for that bank. One PCR bank with algorithm set to SHA1 is always allocated for TPM 1.x. As a consequence of the introduction of nr_allocated_banks, tpm_pcr_extend() does not check anymore if the algorithm stored in tpm_chip is equal to zero. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: remove @flags from tpm_transmit()Jarkko Sakkinen
Remove @flags from tpm_transmit() API. It is no longer used for anything. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: take TPM chip power gating out of tpm_transmit()Jarkko Sakkinen
Call tpm_chip_start() and tpm_chip_stop() in * tpm_chip_register() * tpm_class_shutdown() * tpm_del_char_device() * tpm_pm_suspend() * tpm_try_get_ops() and tpm_put_ops() * tpm2_del_space() And remove these calls from tpm_transmit(). The core reason for this change is that in tpm_vtpm_proxy a locality change requires a virtual TPM command (a command made up just for that driver). The consequence of this is that this commit removes the remaining nested calls. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: introduce tpm_chip_start() and tpm_chip_stop()Jarkko Sakkinen
Encapsulate power gating and locality functionality to tpm_chip_start() and tpm_chip_stop() in order to clean up the branching mess in tpm_transmit(). Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: remove TPM_TRANSMIT_UNLOCKED flagJarkko Sakkinen
Added locking as part of tpm_try_get_ops() and tpm_put_ops() as they are anyway used in most of the call sites except in tpmrm_release() where we take the locks manually. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: remove @space from tpm_transmit()Jarkko Sakkinen
Remove @space from tpm_transmit() API` in order to completely remove the bound between low-level transmission functionality and TPM spaces. The only real dependency existing is the amount of data saved before trying to send a command to the TPM. It doesn't really matter if we save always a bit more than needed so this commit changes the amount saved always to be the size of the TPM header and three handles. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: move TPM space code out of tpm_transmit()Jarkko Sakkinen
Prepare and commit TPM space before and after calling tpm_transmit() instead of doing that inside tpm_transmit(). After this change we can remove TPM_TRANSMIT_NESTED flag from tpm2_prepare_space() and tpm2_commit_space() and replace it with TPM_TRANSMIT_UNLOCKED. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: move tpm_validate_commmand() to tpm2-space.cJarkko Sakkinen
Move tpm_validate_command() to tpm2-space.c and make it part of the tpm2_prepare_space() flow. Make cc resolution as part of the TPM space functionality in order to detach it from rest of the tpm_transmit() flow. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: clean up tpm_try_transmit() error handling flowJarkko Sakkinen
Move locking, locality handling and power management to tpm_transmit() in order to simplify the flow. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: access command header through struct in tpm_try_transmit()Jarkko Sakkinen
Instead of accessing fields of the command header through offsets to the raw buffer, it is a better idea to use the header struct pointer that is already used elsewhere in the function. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: declare struct tpm_headerJarkko Sakkinen
Declare struct tpm_header that replaces struct tpm_input_header and struct tpm_output_header. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: print tpm2_commit_space() error inside tpm2_commit_space()Jarkko Sakkinen
The error logging for tpm2_commit_space() is in a wrong place. This commit moves it inside that function. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: use tpm_buf in tpm_transmit_cmd() as the IO parameterJarkko Sakkinen
Since we pass an initialized struct tpm_buf instance in every call site now, it is cleaner to pass that directly to the tpm_transmit_cmd() as the TPM command/response buffer. Fine-tune a little bit tpm_transmit() and tpm_transmit_cmd() comments while doing this. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: don't print error message in tpm_transmit_cmd when tpm still testingJerry Snitselaar
Currently tpm_transmit_cmd will print an error message if the tpm returns something other than TPM2_RC_SUCCESS. This means that if the tpm returns that it is testing an error message will be printed, and this can cause confusion for the end user. So avoid printing the error message if TPM2_RC_TESTING is the return code. Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: Unify the send callback behaviourJarkko Sakkinen
The send() callback should never return length as it does not in every driver except tpm_crb in the success case. The reason is that the main transmit functionality only cares about whether the transmit was successful or not and ignores the count completely. Suggested-by: Stefan Berger <stefanb@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2018-11-13tpm: tpm_try_transmit() refactor error flow.Tomas Winkler
First, rename out_no_locality to out_locality for bailing out on both tpm_cmd_ready() and tpm_request_locality() failure. Second, ignore the return value of go_to_idle() as it may override the return value of the actual tpm operation, the go_to_idle() error will be caught on any consequent command. Last, fix the wrong 'goto out', that jumped back instead of forward. Cc: stable@vger.kernel.org Fixes: 627448e85c76 ("tpm: separate cmd_ready/go_idle from runtime_pm") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: use u32 instead of int for PCR indexTomas Winkler
The TPM specs defines PCR index as a positive number, and there is no reason to use a signed number. It is also a possible security issue as currently no functions check for a negative index, which may become a large number when converted to u32. Adjust the API to use u32 instead of int in all PCR related functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read()Tomas Winkler
Rename tpm1_pcr_read_dev to tpm1_pcr_read() to match the counterpart tpm2_pcr_read(). Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structureTomas Winkler
1. Use tpm_buf in tpm1_get_random() 2. Fix comment in tpm_get_random() so it is clear that the function is expected to return number of random bytes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm-interface.c drop unused macrosTomas Winkler
The commit: "tpm_tis: further simplify calculation of ordinal duration" left unused macros, we can drop them now. Fixes compilation warnings: tpm-interface.c:37:0: warning: macro "TPM_PROTECTED_COMMAND" is not used [-Wunused-macros] tpm-interface.c:36:0: warning: macro "TSC_MAX_ORDINAL" is not used [-Wunused-macros] tpm-interface.c:38:0: warning: macro "TPM_CONNECTION_COMMAND" is not used [-Wunused-macros] Fixes: f72864300139 ("tpm_tis: further simplify calculation of ordinal duration") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: add tpm_auto_startup() into tpm-interface.cTomas Winkler
Add wrapper tpm_auto_startup() to tpm-interface.c instead of open coded decision between TPM 1.x and TPM 2.x in tpm-chip.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm_startup functionTomas Winkler
TPM manual startup is used only from within TPM 1.x or TPM 2.x code, hence remove tpm_startup() function from tpm-interface.c and add two static functions implementations tpm1_startup() and tpm2_startup() into to tpm1-cmd.c and tpm2-cmd.c respectively. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.cTomas Winkler
Factor out TPM 1.x suspend flow from tpm-interface.c into a new function tpm1_pm_suspend() in tpm1-cmd.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 06:47:40 +0000