summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btnxpuart.c
AgeCommit message (Collapse)Author
2025-07-16Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmapChristian Eggers
The 'quirks' member already ran out of bits on some platforms some time ago. Replace the integer member by a bitmap in order to have enough bits in future. Replace raw bit operations by accessor macros. Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING") Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE") Suggested-by: Pauli Virtanen <pav@iki.fi> Tested-by: Ivan Pravdin <ipravdin.official@gmail.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-30Bluetooth: btnxpuart: Fix missing devm_request_irq() return value checkKrzysztof Kozlowski
Return value of devm_request_irq() must be checked (function is even annotated) and without it clang W=1 complains: btnxpuart.c:494:6: error: unused variable 'ret' [-Werror,-Wunused-variable] Setting up wakeup IRQ handler is not really critical, because the handler is empty, so just log the informational message so user could submit proper bug report and silences the clang warning. Fixes: c50b56664e48 ("Bluetooth: btnxpuart: Implement host-wakeup feature") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btnxpuart: Implement host-wakeup featureNeeraj Sanjay Kale
This implements host wakeup feature by reading the device tree property wakeup-source and 'wakeup' interrupt, and nxp,wakeout-pin, and configuring it as a FALLING EDGE triggered interrupt. When host is suspended, a trigger from the WAKE_OUT pin of the controller wakes it up. To enable this feature, both device tree properties are needed to be defined. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Bluetooth: btnxpuart: Add an error message if FW dump trigger failsNeeraj Sanjay Kale
This prints an error message if the FW Dump trigger command fails. This scenario is mainly observed in legacy chipsets 8987 and 8997 and also IW416, where this feature is unavailable due to memory constraints. Fixes: 998e447f443f ("Bluetooth: btnxpuart: Add support for HCI coredump feature") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Bluetooth: btnxpuart: Revert baudrate change in nxp_shutdownNeeraj Sanjay Kale
This reverts the change baudrate logic in nxp_shutdown. Earlier, when the driver was removed, it restored the controller baudrate to fw_init_baudrate, so that on re-loading the driver, things work fine. However, if the driver was removed while hci0 interface is down, the change baudrate vendor command could not be sent by the driver. When the driver was re-loaded, host and controller baudrate would be mismatched and hci initialization would fail. The only way to recover would be to reboot the system. This issue was fixed by moving the restore baudrate logic from nxp_serdev_remove() to nxp_shutdown(). This fix however caused another issue with the command "hciconfig hci0 reset", which makes hci0 DOWN and UP immediately. Running "bluetoothctl power off" and "bluetoothctl power on" in a tight loop works fine. To maintain support for "hciconfig reset" command, the above mentioned fix is reverted. Fixes: 6fca6781d19d ("Bluetooth: btnxpuart: Move vendor specific initialization to .post_init") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Fix kernel panic during FW releaseNeeraj Sanjay Kale
This fixes a kernel panic seen during release FW in a stress test scenario where WLAN and BT FW download occurs simultaneously, and due to a HW bug, chip sends out only 1 bootloader signatures. When driver receives the bootloader signature, it enters FW download mode, but since no consequtive bootloader signatures seen, FW file is not requested. After 60 seconds, when FW download times out, release_firmware causes a kernel panic. [ 2601.949184] Unable to handle kernel paging request at virtual address 0000312e6f006573 [ 2601.992076] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111802000 [ 2601.992080] [0000312e6f006573] pgd=0000000000000000, p4d=0000000000000000 [ 2601.992087] Internal error: Oops: 0000000096000021 [#1] PREEMPT SMP [ 2601.992091] Modules linked in: algif_hash algif_skcipher af_alg btnxpuart(O) pciexxx(O) mlan(O) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce snd_soc_fsl_easrc snd_soc_fsl_asoc_card imx8_media_dev(C) snd_soc_fsl_micfil polyval_generic snd_soc_fsl_xcvr snd_soc_fsl_sai snd_soc_imx_audmux snd_soc_fsl_asrc snd_soc_imx_card snd_soc_imx_hdmi snd_soc_fsl_aud2htx snd_soc_fsl_utils imx_pcm_dma dw_hdmi_cec flexcan can_dev [ 2602.001825] CPU: 2 PID: 20060 Comm: hciconfig Tainted: G C O 6.6.23-lts-next-06236-gb586a521770e #1 [ 2602.010182] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 2602.010185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2602.010191] pc : _raw_spin_lock+0x34/0x68 [ 2602.010201] lr : free_fw_priv+0x20/0xfc [ 2602.020561] sp : ffff800089363b30 [ 2602.020563] x29: ffff800089363b30 x28: ffff0000d0eb5880 x27: 0000000000000000 [ 2602.020570] x26: 0000000000000000 x25: ffff0000d728b330 x24: 0000000000000000 [ 2602.020577] x23: ffff0000dc856f38 [ 2602.033797] x22: ffff800089363b70 x21: ffff0000dc856000 [ 2602.033802] x20: ff00312e6f006573 x19: ffff0000d0d9ea80 x18: 0000000000000000 [ 2602.033809] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaad80dd480 [ 2602.083320] x14: 0000000000000000 x13: 00000000000001b9 x12: 0000000000000002 [ 2602.083326] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff800089363a30 [ 2602.083333] x8 : ffff0001793d75c0 x7 : ffff0000d6dbc400 x6 : 0000000000000000 [ 2602.083339] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000001 [ 2602.083346] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ff00312e6f006573 [ 2602.083354] Call trace: [ 2602.083356] _raw_spin_lock+0x34/0x68 [ 2602.083364] release_firmware+0x48/0x6c [ 2602.083370] nxp_setup+0x3c4/0x540 [btnxpuart] [ 2602.083383] hci_dev_open_sync+0xf0/0xa34 [ 2602.083391] hci_dev_open+0xd8/0x178 [ 2602.083399] hci_sock_ioctl+0x3b0/0x590 [ 2602.083405] sock_do_ioctl+0x60/0x118 [ 2602.083413] sock_ioctl+0x2f4/0x374 [ 2602.091430] __arm64_sys_ioctl+0xac/0xf0 [ 2602.091437] invoke_syscall+0x48/0x110 [ 2602.091445] el0_svc_common.constprop.0+0xc0/0xe0 [ 2602.091452] do_el0_svc+0x1c/0x28 [ 2602.091457] el0_svc+0x40/0xe4 [ 2602.091465] el0t_64_sync_handler+0x120/0x12c [ 2602.091470] el0t_64_sync+0x190/0x194 Fixes: e3c4891098c8 ("Bluetooth: btnxpuart: Handle FW Download Abort scenario") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7Neeraj Sanjay Kale
This handles the scenario where the driver receives an error code after sending cmd5 or cmd7 in the bootloader signature during FW download. The bootloader error code is handled by the driver and FW offset is corrected accordingly, and the cmd5 or cmd7 is re-sent to the controller in case of CRC error. Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add correct bootloader error codesNeeraj Sanjay Kale
This corrects the bootloader error codes for NXP chipsets. Since we have a common handling for all error codes, there is no backward compatibility issue. Added error handling for CRC error code in V3 bootloader signature. Fixes: 27489364299a ("Bluetooth: btnxpuart: Add handling for boot-signature timeout errors") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add support to set BD addressNeeraj Sanjay Kale
This adds support for setting BD address during hci registration. NXP FW does not allow vendor commands unless it receives a reset command after FW download and initialization done. As a workaround, the .set_bdaddr callback function will first send the HCI reset command, followed by the actual vendor command to set BD address. The driver checks for the local-bd-address property in device tree, and if preset, it sets the HCI_QUIRK_USE_BDADDR_PROPERTY quirk. With this quirk set, the driver's set_bdaddr callback function is called after FW download is complete and before HCI initialization, which sends the hci reset and 3f 22 commands. During initialization, kernel reads the newly set BD address from the controller. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Johan Korsnes <johan.korsnes@remarkable.no> Signed-off-by: Kristian Krohn <kristian.krohn@remarkable.no> Tested-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add support for HCI coredump featureNeeraj Sanjay Kale
This adds support for Bluetooth Coredump feature to BTNXPUART driver to collect FW dumps on demand, or in case FW goes in a bad state. To trigger manual FW dump, following command can be used: echo 1 > /sys/class/bluetooth/hci0/device/coredump Once FW dump is complete, it can be written to a file: cat /sys/class/bluetooth/hci0/devcoredump/data > fw_dump While FW dump is in progress, any HCI command will return -EBUSY. After FW dump is complete, driver will give HCI_NXP_IND_RESET command which soft-resets the chip, allowing FW re-download. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Move vendor specific initialization to .post_initNeeraj Sanjay Kale
This moves change baudrate and power save vendor commands from nxp_setup() to nxp_post_init(). This also moves the baudrate restore logic from nxp_serdev_remove() to nxp_shutdown() which ensure baudrate is restored even when HCI dev is down, preventing baudrate mismatch between host and controller when device is probed again next time. In case of removal when the hdev is up and running, we have to call the shutdown procedure explicitly before unregistering the hdev. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Co-developed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25bluetooth: btnxpuart: Support for controller wakeup gpio configLoic Poulain
When using the out-of-band WAKE_IN and WAKE_OUT pins, we have to tell the firmware which pins to use (from controller point of view). This allows to report remote wakeup support when WAKE_OUT(c2h) is configured. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-29Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streamingNeeraj Sanjay Kale
This fixes a regression caused by previous commit for fixing truncated ACL data, which is causing some intermittent glitches when running two A2DP streams. serdev_device_write_buf() is the root cause of the glitch, which is reverted, and the TX work will continue to write until the queue is empty. This change fixes both issues. No A2DP streaming glitches or truncated ACL data issue observed. Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-08Bluetooth: btnxpuart: Fix driver sending truncated dataNeeraj Sanjay Kale
This fixes the apparent controller hang issue seen during stress test where the host sends a truncated payload, followed by HCI commands. The controller treats these HCI commands as a part of previously truncated payload, leading to command timeouts. Adding a serdev_device_wait_until_sent() call after serdev_device_write_buf() fixed the issue. Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btnxpuart: Add GPIO support to power save featureNeeraj Sanjay Kale
This adds support for driving the chip into sleep or wakeup with a GPIO. If the device tree property device-wakeup-gpios is defined, the driver utilizes this GPIO for controlling the chip's power save state, else it uses the default UART-break method. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btnxpuart: Rename IW615 to IW610Neeraj Sanjay Kale
This changes the chip name of IW615 to IW610. IW610 (formerly called IW615) is yet to be released to broad market, hence there is no issue of backward compatibility. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btnxpuart: Drop _v0 suffix from FW namesNeeraj Sanjay Kale
This updates all FW names by dropping the _v0 suffix. Its been decided that all NXP BT/ WiFi FW names won't support _v0 suffix. The suffix would be kept for next HW versions such as v1, v2 and so on, which do not have backward compatible FW. This change affects W8987, IW416 and IW615 chipsets, out of which new FW files for W8987 and IW615 are yet to be released to broad market. For IW416, old and new FW names are added to maintain backward compatibility for existing customers. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-10Bluetooth: btnxpuart: Add support for ISO packetsNeeraj Sanjay Kale
This enables btnxpuart driver to handle ISO RX packet when DUT is configured as audio sink. Tested IW612 on iMX8MMini platform and BlueZ-5.77 as follows: 1) Configured DUT with bap_bcast_sink role in pipewire configuration file. 2) Started pipewire and DUT is able to sync with Broadcast source through pipewire. 3) ISO data RX is seen in btmon. 4) Audio/Music is heard on audio jack. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Sarveshwar Bajaj <sarveshwar.bajaj@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-23Bluetooth: btnxpuart: Fix random crash seen while removing driverNeeraj Sanjay Kale
This fixes the random kernel crash seen while removing the driver, when running the load/unload test over multiple iterations. 1) modprobe btnxpuart 2) hciconfig hci0 reset 3) hciconfig (check hci0 interface up with valid BD address) 4) modprobe -r btnxpuart Repeat steps 1 to 4 The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(), which gets scheduled after module is removed, causing a kernel crash. This hidden issue got highlighted after enabling Power Save by default in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on startup) The new ps_cleanup() deasserts UART break immediately while closing serdev device, cancels any scheduled ps_work and destroys the ps_lock mutex. [ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258 [ 85.884624] Mem abort info: [ 85.884625] ESR = 0x0000000086000007 [ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits [ 85.884633] SET = 0, FnV = 0 [ 85.884636] EA = 0, S1PTW = 0 [ 85.884638] FSC = 0x07: level 3 translation fault [ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000 [ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000 [ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP [ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)] [ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1 [ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT) [ 85.936182] Workqueue: events 0xffffd4a61638f380 [ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 85.952817] pc : 0xffffd4a61638f258 [ 85.952823] lr : 0xffffd4a61638f258 [ 85.952827] sp : ffff8000084fbd70 [ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000 [ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305 [ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970 [ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000 [ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090 [ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139 [ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50 [ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8 [ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000 [ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000 [ 85.977443] Call trace: [ 85.977446] 0xffffd4a61638f258 [ 85.977451] 0xffffd4a61638f3e8 [ 85.977455] process_one_work+0x1d4/0x330 [ 85.977464] worker_thread+0x6c/0x430 [ 85.977471] kthread+0x108/0x10c [ 85.977476] ret_from_fork+0x10/0x20 [ 85.977488] Code: bad PC value [ 85.977491] ---[ end trace 0000000000000000 ]--- Preset since v6.9.11 Fixes: 86d55f124b52 ("Bluetooth: btnxpuart: Deasset UART break before closing serdev device") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Fix warnings for suspend and resume functionsNeeraj Sanjay Kale
This fixes the warnings 'nxp_serdev_resume' and 'nxp_serdev_suspend' defined but not used. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407100518.06Xxq5PK-lkp@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Add system suspend and resume handlersNeeraj Sanjay Kale
This adds handling for system suspend and resume. While the host enters suspend state, the driver will drive the chip into low power state. Similarly when system is resuming, the driver will wake up the chip. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Add support for IW615 chipsetNeeraj Sanjay Kale
This adds support for IW615 chipset with it's bootloader signature and firmware file. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Add support for AW693 A1 chipsetNeeraj Sanjay Kale
This adds support for AW693 A1 chipset with it's bootloader signature and firmware file. No firmware name change needed for AW693 A0 chipset. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btnxpuart: Add handling for boot-signature timeout errorsNeeraj Sanjay Kale
This handles the timeout error codes sent by the chip as part of the bootloader signatures during firmware download process. When the bootloader does not receive a response packet from the host within a specific time, it adds an error code to the bootloader signature while requesting for the FW chunk from the same offset. The host is expected to clear this error code with a NAK, and reply to only those bootloader signatures which have error code 0. However, the driver was ignoring this error code and replying with the firmware chunks instead, which is apparently ignored by the chip and the chip resends the same bootloader signature with the error code again. This happens in a loop until the error code self clears and firmware download proceeds ahead, adding a couple of milliseconds to the total firmware download time. Commit 689ca16e5232 was an initial implementation which simply printed the following line during driver debug: - FW Download received err 0x04 from chip This commit adds the expected handling to the error codes. This error handling is valid for data_req bootloader signatures for V3 and future bootloader versions. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btnxpuart: Update firmware namesNeeraj Sanjay Kale
This updates the firmware names of 3 chipsets: w8987, w8997, w9098. These changes are been done to standardize chip specific firmware file names to be in sync with firmware names of newer chipsets. The naming convention for BT-only files would be as follows: For dual-radio WiFi+BT chipsets: - <protocol-BT><chip-name>_bt_v<HW-version>.bin For tri-radio WiFi+BT+15.4 chipsets: - <protocol-BT><protocol-15.4><chip-name>_bt_v<HW-version>.bin To maintain backward compatibility, this commit adds a provision to request older firmware file name, if new firmware file name not found in /lib/firmware/nxp/. A new device tree property has been introduced called firmware-name, to override the hardcoded firmware names (old and new) in the driver. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloadingLuke Wang
When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btnxpuart: Handle FW Download Abort scenarioNeeraj Sanjay Kale
This adds a new flag BTNXPUART_FW_DOWNLOAD_ABORT which handles the situation where driver is removed while firmware download is in progress. logs: modprobe btnxpuart [65239.230431] Bluetooth: hci0: ChipID: 7601, Version: 0 [65239.236670] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se rmmod btnxpuart [65241.425300] Bluetooth: hci0: FW Download Aborted Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btnxpuart: Enable status prints for firmware downloadNeeraj Sanjay Kale
This enables prints for firmware download which can help automation tests to verify firmware download functionality. dmesg logs before: modprobe btnxpuart [ 1999.187264] Bluetooth: MGMT ver 1.22 dmesg logs with this patch: modprobe btnxpuart [16179.758515] Bluetooth: hci0: ChipID: 7601, Version: 0 [16179.764748] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se [16181.217490] Bluetooth: hci0: FW Download Complete: 372696 bytes [16182.701398] Bluetooth: MGMT ver 1.22 Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush()Neeraj Sanjay Kale
This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-06-28Bluetooth: btnxpuart: Enable Power Save feature on startupNeeraj Sanjay Kale
This sets the default power save mode setting to enabled. The power save feature is now stable and stress test issues, such as the TX timeout error, have been resolved. commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test") With this setting, the driver will send the vendor command to FW at startup, to enable power save feature. User can disable this feature using the following vendor command: hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE) Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-03-21Merge tag 'tty-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ...
2024-03-06Bluetooth: btnxpuart: Fix btnxpuart_closeMarcel Ziswiler
Fix scheduling while atomic BUG in btnxpuart_close(), properly purge the transmit queue and free the receive skb. [ 10.973809] BUG: scheduling while atomic: kworker/u9:0/80/0x00000002 ... [ 10.980740] CPU: 3 PID: 80 Comm: kworker/u9:0 Not tainted 6.8.0-rc7-0.0.0-devel-00005-g61fdfceacf09 #1 [ 10.980751] Hardware name: Toradex Verdin AM62 WB on Dahlia Board (DT) [ 10.980760] Workqueue: hci0 hci_power_off [bluetooth] [ 10.981169] Call trace: ... [ 10.981363] uart_update_mctrl+0x58/0x78 [ 10.981373] uart_dtr_rts+0x104/0x114 [ 10.981381] tty_port_shutdown+0xd4/0xdc [ 10.981396] tty_port_close+0x40/0xbc [ 10.981407] uart_close+0x34/0x9c [ 10.981414] ttyport_close+0x50/0x94 [ 10.981430] serdev_device_close+0x40/0x50 [ 10.981442] btnxpuart_close+0x24/0x98 [btnxpuart] [ 10.981469] hci_dev_close_sync+0x2d8/0x718 [bluetooth] [ 10.981728] hci_dev_do_close+0x2c/0x70 [bluetooth] [ 10.981862] hci_power_off+0x20/0x64 [bluetooth] Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Cc: stable@vger.kernel.org Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-03-06Bluetooth: btnxpuart: Resolve TX timeout error in power save stress testNeeraj Sanjay Kale
This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: <load btnxpuart.ko> hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested above script for 50,000 iterations and TX timeout error was not observed anymore. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-01-27treewide, serdev: change receive_buf() return type to size_tFrancesco Dolcini
receive_buf() is called from ttyport_receive_buf() that expects values ">= 0" from serdev_controller_receive_buf(), change its return type from ssize_t to size_t. The need for this clean-up was noticed while fixing a warning, see commit 94d053942544 ("Bluetooth: btnxpuart: fix recv_buf() return value"). Changing the callback prototype to return an unsigned seems the best way to document the API and ensure that is properly used. GNSS drivers implementation of serdev receive_buf() callback return directly the return value of gnss_insert_raw(). gnss_insert_raw() returns a signed int, however this is not an issue since the value returned is always positive, because of the kfifo_in() implementation. gnss_insert_raw() could be changed to return also an unsigned, however this is not implemented here as request by the GNSS maintainer Johan Hovold. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Maximilian Luz <luzmaximilian@gmail.com> # for platform/surface Acked-by: Lee Jones <lee@kernel.org> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240122180551.34429-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-18Merge tag 'tty-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...
2023-12-22Bluetooth: btnxpuart: remove useless assignmentFrancesco Dolcini
Remove useless assignment of rx_skb to NULL in case the skb is in error, this is already done in h4_recv_buf() that is executed a few lines before. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: btnxpuart: fix recv_buf() return valueFrancesco Dolcini
Serdev recv_buf() callback is supposed to return the amount of bytes consumed, therefore an int in between 0 and count. Do not return a negative number in case of issue, just print an error and return count. Before this change, in case of error, the returned negative number was internally converted to 0 in ttyport_receive_buf, now when the receive buffer is corrupted we return the size of the whole received data (`count`). This should allow for better recovery in case receiver/transmitter get out of sync if some data is lost. This fixes a WARN in ttyport_receive_buf(). Bluetooth: hci0: Frame reassembly failed (-84) ------------[ cut here ]------------ serial serial0: receive_buf returns -84 (count = 6) WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8 Modules linked in: mwifiex_sdio(+) ... CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1 Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) Workqueue: events_unbound flush_to_ldisc pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ttyport_receive_buf+0xd8/0xf8 lr : ttyport_receive_buf+0xd8/0xf8 ... Call trace: ttyport_receive_buf+0xd8/0xf8 flush_to_ldisc+0xbc/0x1a4 process_scheduled_works+0x16c/0x28c Closes: https://lore.kernel.org/all/ZWEIhcUXfutb5SY6@francesco-nb.int.toradex.com/ Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-08tty: serdev: convert to u8 and size_tJiri Slaby (SUSE)
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. This patch converts struct serdev_device_ops hooks and its instantiations. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Rob Herring <robh@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-24Bluetooth: btnxpuart: Improve inband Independent Reset handlingNeeraj Sanjay Kale
This improves the inband IR command handling for NXP BT chipsets. When the IR vendor command is received, the driver injects a HW error event, which causes a reset sequence in hci_error_reset(). The vendor IR command is sent to the controller while hci dev is been closed, and FW is re-downloaded when nxp_setup() is called during hci_dev_do_open(). The HCI_SETUP flag is set in nxp_hw_err() to make sure that nxp_setup() is been called during hci_dev_do_open(). This also makes the nxp_setup() and power save functions more generic. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btnxpuart: Add support for IW624 chipsetNeeraj Sanjay Kale
This adds support for NXP IW624 chipset in btnxpuart driver by adding FW name and bootloader signature. Based on the loader version bits 7:6 of the bootloader signature, the driver can choose between selecting secure and non-secure FW files. For cmd5 payload during FW download, this chip has addresses of few registers offset by 1, so added boot_reg_offset to handle the chip specific offset. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btnxpuart: Remove check for CTS low after FW downloadNeeraj Sanjay Kale
This removes the unnecessary check for CTS low after FW download. After FW download is complete, the CTS line is already seen low. It becomes high after 2 msec, and low again after FW initialization is complete. This makes the current check for CTS low redundant. This removes the wait for CTS low section and increase delay to 1200msec instead, which is sufficiant for all NXP chipsets to initialize FW. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btnxpuart: Add support for AW693 chipsetNeeraj Sanjay Kale
This adds support for NXP AW693 chipset in btnxpuart driver by adding FW name and bootloader signature. Based on the loader version bits 7:6 of the bootloader signature, the driver can choose between selecting secure and non-secure FW files. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-19Bluetooth: btnxpuart: Fix compiler warningsNeeraj Sanjay Kale
This fixes the follwing compiler warning reported by kernel test robot: drivers/bluetooth/btnxpuart.c:1332:34: warning: unused variable 'nxpuart_of_match_table' [-Wunused-const-variable] Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305161345.eClvTYQ9-lkp@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: Enable flow control before checking boot signatureNeeraj Sanjay Kale
This enables flow control before checking for bootloader signature and deciding whether FW download is needed or not. In case of V1 bootloader chips w8987 and w8997, it is observed that if WLAN FW is downloaded first and power save is enabled in wlan core, bootloader signatures are not emitted by the BT core when the chip is put to sleep. As a result, the driver skips FW download and subsequent HCI commands get timeout errors in dmesg as shown below: [ 112.898867] Bluetooth: hci0: Opcode 0x c03 failed: -110 [ 114.914865] Bluetooth: hci0: Setting baudrate failed (-110) [ 116.930856] Bluetooth: hci0: Setting wake-up method failed (-110) By enabling the flow control, the host enables its RTS pin, and an interrupt in chip's UART peripheral causes the bootloader to wake up, enabling the bootloader signatures, which then helps in downloading the bluetooth FW file. This changes all instances of 0/1 for serdev_device_set_flow_control() to false/true. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: Fix sparse warningsLuiz Augusto von Dentz
This fixes the following sparse warnings: drivers/bluetooth/btnxpuart.c:681:23: sparse: sparse: restricted __le16 degrades to integer drivers/bluetooth/btnxpuart.c:690:82: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:690:82: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:690:82: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:694:84: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:694:84: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:694:84: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:708:23: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] requested_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:708:23: sparse: expected unsigned int [usertype] requested_len drivers/bluetooth/btnxpuart.c:708:23: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:787:78: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] chipid @@ got restricted __le16 [usertype] chip_id @@ drivers/bluetooth/btnxpuart.c:787:78: sparse: expected unsigned short [usertype] chipid drivers/bluetooth/btnxpuart.c:787:78: sparse: got restricted __le16 [usertype] chip_id drivers/bluetooth/btnxpuart.c:810:74: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:810:74: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:810:74: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:815:76: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:815:76: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:815:76: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:834:16: sparse: sparse: restricted __le32 degrades to integer drivers/bluetooth/btnxpuart.c:843:55: sparse: sparse: restricted __le32 degrades to integer drivers/bluetooth/btnxpuart.c:844:36: sparse: sparse: incorrect type in argument 3 (different base types) @@ expected unsigned long [usertype] @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:844:36: sparse: expected unsigned long [usertype] drivers/bluetooth/btnxpuart.c:844:36: sparse: got restricted __le16 [usertype] len Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304160736.Tsa0zTBU-lkp@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: No need to check the received bootloader signatureNeeraj Sanjay Kale
We can never assume the uart will deliver a complete packet to the BT layer at once, the expected packet may be divided into several parts by uart as uart doesn't know the received packet size, the received data count may mismatch with the expected packet size, so here is_valid_bootloader_signature() check may always return false. Even we remove the count check in is_valid_bootloader_signature(), then the first part of the data which includes the packet type can pass the is_valid_bootloader_signature() check, but the remaining parts don't have the packet type data still cannot pass the check, here return directly will cause the data loss. So need to remove the received bootloader signature check here, the h4_recv_buf() can help us combine the different data received into one packet. If any out-of-sync or incomplete bootloader signature is received, it is safe to ignore and discard it, and process the next bootloader signature. Co-developed-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: Disable Power Save feature on startupNeeraj Sanjay Kale
This sets the default power save mode setting to disabled. With this setting, this driver will behave like a normal h4 driver. If user needs to use the power save feature, it can be enabled using the following vendor command: hcitool cmd 3f 23 02 00 00 (HCI_NXP_AUTO_SLEEP_MODE) Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: Deasset UART break before closing serdev deviceNeeraj Sanjay Kale
This adds a call to ps_wakeup() before closing the serdev device, to de-assert UART break. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:20:13 +0000