| Age | Commit message (Collapse) | Author |
|---|
|
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
|
Since commit b749965edda8 ("ublk: remove ublk_commit_and_fetch()"),
ublk_sub_req_ref() no longer uses its struct request *req argument.
So drop the argument from ublk_sub_req_ref(), and from
ublk_need_complete_req(), which only passes it to ublk_sub_req_ref().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250715154244.1626810-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass 'const struct ublk_io *' to ublk_[un]map_io() since just io->addr
and io->res are read in the two helpers.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove ublk_commit_and_fetch() and open code request completion.
Consolidate accesses to struct ublk_io in UBLK_IO_COMMIT_AND_FETCH_REQ. When
the ublk_io daemon task restriction is relaxed in the future, ublk_io will
need to be protected by a lock. Unregister the auto-registered buffer and
complete the request last, as these don't need to happen under the lock.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper ublk_check_fetch_buf() to validate UBLK_IO_FETCH_REQ's addr.
This doesn't require access to the ublk_io, so it can be done before taking
the ublk_device mutex.
This way also fixes one missing return value of -EINVAL in case of early
failure from ublk_fetch().
Fixes: b69b8edfb27d ("ublk: properly serialize all FETCH_REQs")
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can share space of `io->addr` for storing auto buffer register data
and user space buffer address.
So store auto buffer register data into `struct ublk_io`.
Prepare for supporting batch IO in which many ublk IOs share single
uring_cmd, so we can't store auto buffer register data into uring_cmd
pdu.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move check & clearing UBLK_IO_FLAG_AUTO_BUF_REG to
ublk_handle_auto_buf_reg(), also return buffer index from this helper.
Also move ublk_set_auto_buf_reg() to this single helper too.
Add ublk_config_io_buf() for setting up ublk io buffer, covers both
ublk buffer copy or auto buffer register.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refactor ublk_commit_and_fetch() in the following way for removing
parameter of `struct ublksrv_io_cmd *`:
- return `struct request *` from ublk_fill_io_cmd(), so that we can
use request reference reliably in this way cause both request and
io_uring_cmd reference share same storage
- move ublk_fill_io_cmd() before calling into ublk_commit_and_fetch(),
so that ublk_fill_io_cmd() could be run with per-io lock held for
supporting command batch.
- pass ->zone_append_lba to ublk_commit_and_fetch() directly
The main motivation is to reproduce ublk_commit_and_fetch() for fetching
io command batch with multishot uring_cmd.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Let ublk_fill_io_cmd() clear UBLK_IO_FLAG_OWNED_BY_SRV too.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Almost every block driver deals with fake timeout logic around real
request completion code.
Also the existing way may cause request reference count leak, so move the
logic into __ublk_complete_rq(), then we can skip the completion in the
last step like other drivers.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Look up ublk process via its pid in timeout handler, so we can avoid to
touch io->task, because it is fragile to touch task structure.
It is fine to kill ublk server process and this way is simpler.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk server pid(the `tgid` of the process opening the ublk device) is stored
in `ublk_device->ublksrv_tgid`. This `tgid` is then checked against the
`ublksrv_pid` in `ublk_ctrl_start_dev` and `ublk_ctrl_end_recovery`.
This ensures that correct ublk server pid is stored in device info.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For performance reasons (minimizing the number of cache lines accessed
in the hot path), we store the "canceling" state redundantly - there is
one flag in the device, which can be considered the source of truth, and
per-queue copies of that flag. This redundancy can cause confusion, and
opens the door to bugs where the state is set inconsistently. Try to
guard against these bugs by introducing a ublk_set_canceling helper
which is the sole mutator of both the per-device and per-queue canceling
state. This helper always sets the state consistently. Use the helper in
all places where we need to modify the canceling state.
No functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250703-ublk_too_many_quiesce-v2-2-3527b5339eeb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Recently, we've observed a few cases where a ublk server is able to
complete restart more quickly than the driver can process the exit of
the previous ublk server. The new ublk server comes up, attempts
recovery of the preexisting ublk devices, and observes them still in
state UBLK_S_DEV_LIVE. While this is possible due to the asynchronous
nature of io_uring cleanup and should therefore be handled properly in
the ublk server, it is still preferable to make ublk server exit
handling faster if possible, as we should strive for it to not be a
limiting factor in how fast a ublk server can restart and provide
service again.
Analysis of the issue showed that the vast majority of the time spent in
handling the ublk server exit was in calls to blk_mq_quiesce_queue,
which is essentially just a (relatively expensive) call to
synchronize_rcu. The ublk server exit path currently issues an
unnecessarily large number of calls to blk_mq_quiesce_queue, for two
reasons:
1. It tries to call blk_mq_quiesce_queue once per ublk_queue. However,
blk_mq_quiesce_queue targets the request_queue of the underlying ublk
device, of which there is only one. So the number of calls is larger
than necessary by a factor of nr_hw_queues.
2. In practice, it calls blk_mq_quiesce_queue _more_ than once per
ublk_queue. This is because of a data race where we read
ubq->canceling without any locking when deciding if we should call
ublk_start_cancel. It is thus possible for two calls to
ublk_uring_cmd_cancel_fn against the same ublk_queue to both call
ublk_start_cancel against the same ublk_queue.
Fix this by making the "canceling" flag a per-device state. This
actually matches the existing code better, as there are several places
where the flag is set or cleared for all queues simultaneously, and
there is the general expectation that cancellation corresponds with ublk
server exit. This per-device canceling flag is then checked under a
(new) lock (addressing the data race (2) above), and the queue is only
quiesced if it is cleared (addressing (1) above). The result is just one
call to blk_mq_quiesce_queue per ublk device.
To minimize the number of cache lines that are accessed in the hot path,
the per-queue canceling flag is kept. The values of the per-device
canceling flag and all per-queue canceling flags should always match.
In our setup, where one ublk server handles I/O for 128 ublk devices,
each having 24 hardware queues of depth 4096, here are the results
before and after this patch, where teardown time is measured from the
first call to io_ring_ctx_wait_and_kill to the return from the last
ublk_ch_release:
before after
number of calls to blk_mq_quiesce_queue: 6469 256
teardown time: 11.14s 2.44s
There are still some potential optimizations here, but this takes care
of a big chunk of the ublk server exit handling delay.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250703-ublk_too_many_quiesce-v2-1-3527b5339eeb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 524346e9d79f ("ublk: build batch from IOs in same io_ring_ctx and io task")
need to dereference `io->cmd` for checking if the IO can be added to current
batch, see ublk_belong_to_same_batch() and io_uring_cmd_ctx_handle(). However,
`io->cmd` may become invalid after the uring_cmd is canceled.
Fixes it by only allowing to queue this IO in case that ublk_prep_req()
returns `BLK_STS_OK`, when 'io->cmd' is guaranteed to be valid.
Reported-by: Changhui Zhong <czhong@redhat.com>
Fixes: 524346e9d79f ("ublk: build batch from IOs in same io_ring_ctx and io task")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250701072325.1458109-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct ublk_io is already 56 bytes on 64-bit architectures, so round it
up to a full cache line (typically 64 bytes). This ensures a single
ublk_io doesn't span multiple cache lines and prevents false sharing if
consecutive ublk_io's are accessed by different daemon tasks.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-15-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_get_req_ref() and ublk_put_req_ref() currently call
ublk_need_req_ref(ubq) to check whether the ublk device features require
reference counting of its requests. However, all callers already know
that reference counting is required:
- __ublk_check_and_get_req() is only called from
ublk_check_and_get_req() if user copy is enabled, and from
ublk_register_io_buf() if zero copy is enabled
- ublk_io_release() is only called for requests registered by
ublk_register_io_buf(), which requires zero copy
- ublk_ch_read_iter() and ublk_ch_write_iter() only call
ublk_put_req_ref() if ublk_check_and_get_req() succeeded, which
requires user copy to be enabled
So drop the ublk_need_req_ref() check and the ubq argument in
ublk_get_req_ref() and ublk_put_req_ref().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-14-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_io_release() performs an expensive atomic refcount decrement. This
atomic operation is unnecessary in the common case where the request's
buffer is registered and unregistered on the daemon task before handling
UBLK_IO_COMMIT_AND_FETCH_REQ for the I/O. So if ublk_io_release() is
called on the daemon task and task_registered_buffers is positive, just
decrement task_registered_buffers (nonatomically). ublk_sub_req_ref()
will apply this decrement when it atomically subtracts from io->ref.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-13-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_register_io_buf() performs an expensive atomic refcount increment,
as well as a lot of pointer chasing to look up the struct request.
Create a separate ublk_daemon_register_io_buf() for the daemon task to
call. Initialize ublk_io's reference count to a large number, introduce
a field task_registered_buffers to count the buffers registered on the
daemon task, and atomically subtract the large number minus
task_registered_buffers in ublk_commit_and_fetch().
Also obtain the struct request directly from ublk_io's req field instead
of looking it up on the tagset.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-12-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make the unlikely case blk_should_fake_timeout() return early to reduce
the indentation of the successful path.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-11-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, UBLK_IO_REGISTER_IO_BUF and UBLK_IO_UNREGISTER_IO_BUF are
only permitted on the ublk_io's daemon task. But this restriction is
unnecessary. ublk_register_io_buf() calls __ublk_check_and_get_req() to
look up the request from the tagset and atomically take a reference on
the request without accessing the ublk_io. ublk_unregister_io_buf()
doesn't use the q_id or tag at all.
So allow these opcodes even on tasks other than io->task.
Handle UBLK_IO_UNREGISTER_IO_BUF before obtaining the ubq and io since
the buffer index being unregistered is not necessarily related to the
specified q_id and tag.
Add a feature flag UBLK_F_BUF_REG_OFF_DAEMON that userspace can use to
determine whether the kernel supports off-daemon buffer registration.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-10-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_IO_UNREGISTER_IO_BUF currently requires a valid q_id and tag to be
passed in the ublksrv_io_cmd. However, only the addr (registered buffer
index) is actually used to unregister the buffer. There is no check that
the q_id and tag are for the ublk request whose buffer is registered at
the given index. To prepare to allow userspace to omit the q_id and tag,
check the UBLK_F_SUPPORT_ZERO_COPY flag on the ublk_device instead of
the ublk_queue.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-9-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_IO_FLAG_ACTIVE and UBLK_IO_FLAG_OWNED_BY_SRV are mutually
exclusive. So just check that UBLK_IO_FLAG_OWNED_BY_SRV is set in
__ublk_ch_uring_cmd(); that implies UBLK_IO_FLAG_ACTIVE is unset.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-7-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The variable is computed from a simple expression and used once, so just
replace it with the expression.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-6-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check for UBLK_IO_FETCH_REQ early in __ublk_ch_uring_cmd() and skip the
rest of the checks in this case. This allows removing the checks for
NULL io->task and UBLK_IO_FLAG_OWNED_BY_SRV unset in io->flags, which
are only allowed for FETCH.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for skipping some of the other checks for certain IO
opcodes, move the cmd_op check earlier.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__ublk_check_and_get_req() attempts to atomically look up the struct
request for a ublk I/O and take a reference on it. However, the request
can be freed between the lookup on the tagset in blk_mq_tag_to_rq() and
the increment of its reference count in ublk_get_req_ref(), for example
if an elevator switch happens concurrently.
Fix the potential use after free by moving the reference count from
ublk_rq_data to ublk_io. Move the fields buf_index and buf_ctx_handle
too to reduce the number of cache lines touched when dispatching and
completing a ublk I/O, allowing ublk_rq_data to be removed entirely.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 62fe99cef94a ("ublk: add read()/write() support for ublk char device")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct ublk_device's __queues points to an allocation with up to
UBLK_MAX_NR_QUEUES (4096) queues, each of which have:
- struct ublk_queue (48 bytes)
- Tail array of up to UBLK_MAX_QUEUE_DEPTH (4096) struct ublk_io's,
32 bytes each
This means the full allocation can exceed 512 MB, which may well be
impossible to service with contiguous physical pages. Switch to
kvcalloc() and kvfree(), since there is no need for physically
contiguous memory.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add additional checks that queue depth and number of queues are
non-zero.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250626022046.235018-1-ronniesahlberg@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If ublk_get_data() fails, -EIOCBQUEUED is returned and the current command
becomes ASYNC. And the only reason is that mapping data can't move on,
because of no enough pages or pending signal, then the current ublk request
has to be requeued.
Once the request need to be requeued, we have to setup `ublk_io` correctly,
including io->cmd and flags, otherwise the request may not be forwarded to
ublk server successfully.
Fixes: 9810362a57cb ("ublk: don't call ublk_dispatch_req() for NEED_GET_DATA")
Reported-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAGVVp+VN9QcpHUz_0nasFf5q9i1gi8H8j-G-6mkBoqa3TyjRHA@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Link: https://lore.kernel.org/r/20250624104121.859519-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_queue_cmd_list() dispatches the whole batch list by scheduling task
work via the tail request's io_uring_cmd, this way is fine even though
more than one io_ring_ctx are involved for this batch since it is just
one running context.
However, the task work handler ublk_cmd_list_tw_cb() takes `issue_flags`
of tail uring_cmd's io_ring_ctx for completing all commands. This way is
wrong if any uring_cmd is issued from different io_ring_ctx.
Fixes it by always building batch IOs from same io_ring_ctx and io task
because ublk_dispatch_req() does validate task context, and IO needs to
be aborted in case of running from fallback task work context.
For typical per-queue or per-io daemon implementation, this way shouldn't
make difference from performance viewpoint, because single io_ring_ctx is
taken in each daemon for normal use case.
Fixes: d796cea7b9f3 ("ublk: implement ->queue_rqs()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250625022554.883571-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sanity check the values for queue depth and number of queues
we get from userspace when adding a device.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Fixes: 62fe99cef94a ("ublk: add read()/write() support for ublk char device")
Link: https://lore.kernel.org/r/20250619021031.181340-1-ronniesahlberg@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, ublk_drv associates to each hardware queue (hctx) a unique
task (called the queue's ubq_daemon) which is allowed to issue
COMMIT_AND_FETCH commands against the hctx. If any other task attempts
to do so, the command fails immediately with EINVAL. When considered
together with the block layer architecture, the result is that for each
CPU C on the system, there is a unique ublk server thread which is
allowed to handle I/O submitted on CPU C. This can lead to suboptimal
performance under imbalanced load generation. For an extreme example,
suppose all the load is generated on CPUs mapping to a single ublk
server thread. Then that thread may be fully utilized and become the
bottleneck in the system, while other ublk server threads are totally
idle.
This issue can also be addressed directly in the ublk server without
kernel support by having threads dequeue I/Os and pass them around to
ensure even load. But this solution requires inter-thread communication
at least twice for each I/O (submission and completion), which is
generally a bad pattern for performance. The problem gets even worse
with zero copy, as more inter-thread communication would be required to
have the buffer register/unregister calls to come from the correct
thread.
Therefore, address this issue in ublk_drv by allowing each I/O to have
its own daemon task. Two I/Os in the same queue are now allowed to be
serviced by different daemon tasks - this was not possible before.
Imbalanced load can then be balanced across all ublk server threads by
having the ublk server threads issue FETCH_REQs in a round-robin manner.
As a small toy example, consider a system with a single ublk device
having 2 queues, each of depth 4. A ublk server having 4 threads could
issue its FETCH_REQs against this device as follows (where each entry is
the qid,tag pair that the FETCH_REQ targets):
ublk server thread: T0 T1 T2 T3
0,0 0,1 0,2 0,3
1,3 1,0 1,1 1,2
This setup allows for load that is concentrated on one hctx/ublk_queue
to be spread out across all ublk server threads, alleviating the issue
described above.
Add the new UBLK_F_PER_IO_DAEMON feature to ublk_drv, which ublk servers
can use to essentially test for the presence of this change and tailor
their behavior accordingly.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-1-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
|
Add feature UBLK_F_QUIESCE, which adds control command `UBLK_U_CMD_QUIESCE_DEV`
for quiescing device, then device state can become `UBLK_S_DEV_QUIESCED`
or `UBLK_S_DEV_FAIL_IO` finally from ublk_ch_release() with ublk server
cooperation.
This feature can help to support to upgrade ublk server application by
shutting down ublk server gracefully, meantime keep ublk block device
persistent during the upgrading period.
The feature is only available for UBLK_F_USER_RECOVERY.
Suggested-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_AUTO_BUF_REG requires that the buffer registered automatically
is unregistered in same `io_ring_ctx`, so check it explicitly.
Document this requirement for UBLK_F_AUTO_BUF_REG.
Drop WARN_ON_ONCE() which is triggered from userspace code path.
Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522152043.399824-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The argument has been unused since the function was added, so remove it.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250521160720.1893326-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If ublk_set_auto_buf_reg() fails, we need to unlock and return,
otherwise `ub->mutex` is leaked.
Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250521025502.71041-2-ming.lei@redhat.com
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For UBLK_F_AUTO_BUF_REG, buffer is registered to uring_cmd context
automatically with the provided buffer index. User may provide one wrong
buffer index, or the specified buffer is registered by application already.
Add UBLK_AUTO_BUF_REG_FALLBACK for supporting to auto buffer registering
fallback by completing the uring_cmd and telling ublk server the
register failure via UBLK_AUTO_BUF_REG_FALLBACK, then ublk server still
can register the buffer from userspace.
So we can provide reliable way for supporting auto buffer register.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_AUTO_BUF_REG
Add UBLK_F_AUTO_BUF_REG for supporting to register buffer automatically
to local io_uring context with provided buffer index.
Add UAPI structure `struct ublk_auto_buf_reg` for holding user parameter
to register request buffer automatically, one 'flags' field is defined, and
there is still 32bit available for future extension, such as, adding one
io_ring FD field for registering buffer to external io_uring.
`struct ublk_auto_buf_reg` is populated from ublk uring_cmd's sqe->addr,
and all existing ublk commands are data-less, so it is just fine to reuse
sqe->addr for this purpose.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_SUPPORT_ZERO_COPY requires ublk server to issue explicit buffer
register/unregister uring_cmd for each IO, this way is not only inefficient,
but also introduce dependency between buffer consumer and buffer register/
unregister uring_cmd, please see tools/testing/selftests/ublk/stripe.c
in which backing file IO has to be issued one by one by IOSQE_IO_LINK.
Prepare for adding feature UBLK_F_AUTO_BUF_REG for addressing the existing
zero copy limitation:
- register request buffer automatically to ublk uring_cmd's io_uring
context before delivering io command to ublk server
- unregister request buffer automatically from the ublk uring_cmd's
io_uring context when completing the request
- io_uring will unregister the buffer automatically when uring is
exiting, so we needn't worry about accident exit
For using this feature, ublk server has to create one sparse buffer table
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert to refcount_t and prepare for supporting to register bvec buffer
automatically, which needs to initialize reference counter as 2, and
kref doesn't provide this interface, so convert to refcount_t.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit:
f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and
ublk_cancel_cmd")
adds a request state check in ublk_cancel_cmd(), and if the request is
started, skips canceling this uring_cmd.
However, the current uring_cmd may be in ACTIVE state, without block
request coming to the uring command. Meantime, if the cached request in
tag_set.tags[tag] has been delivered to ublk server and reycycled, then
this uring_cmd can't be canceled.
ublk requests are aborted in ublk char device release handler, which
depends on canceling all ACTIVE uring_cmd. So it causes a dead loop.
Fix this issue by not taking a stale request into account when canceling
uring_cmd in ublk_cancel_cmd().
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/
Fixes: f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250515162601.77346-1-ming.lei@redhat.com
[axboe: rewording of commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the q argument from blk_rq_map_kern and the internal helpers
called by it as the queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Every ublk I/O command except UBLK_IO_FETCH_REQ checks that the ublk_io
has UBLK_IO_FLAG_OWNED_BY_SRV set. Consolidate the separate checks into
a single one in __ublk_ch_uring_cmd(), analogous to those for
UBLK_IO_FLAG_ACTIVE and UBLK_IO_FLAG_NEED_GET_DATA.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505172624.1121839-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge 6.15 block fixes in, once again, to resolve conflicts with the
fixes for ublk that went into mainline and the 6.16 ublk updates.
* block-6.15:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A ublk_io is converted to a request in several places in the I/O path by
using blk_mq_tag_to_rq() to look up the (qid, tag) on the ublk device's
tagset. This involves a bunch of dereferences and a tag bounds check.
To make this conversion cheaper, store the request pointer in ublk_io.
Overlap this storage with the io_uring_cmd pointer. This is safe because
the io_uring_cmd pointer is only valid if UBLK_IO_FLAG_ACTIVE is set on
the ublk_io, the request pointer is valid if UBLK_IO_FLAG_OWNED_BY_SRV,
and these flags are mutually exclusive.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-10-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_abort_queue() currently checks whether the UBLK_IO_FLAG_ACTIVE flag
is cleared to tell whether to abort each ublk_io in the queue. But it's
possible for a ublk_io to not be ACTIVE but also not have a request in
flight, such as when no fetch request has yet been submitted for a tag
or when a fetch request is cancelled. So ublk_abort_queue() must
additionally check for an inflight request.
Simplify this code by checking for UBLK_IO_FLAG_OWNED_BY_SRV instead,
which indicates precisely whether a request is currently inflight.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-9-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_dispatch_req() currently handles 3 different cases: incoming ublk
requests that don't need to wait for a data buffer, incoming requests
that do need to wait for a buffer, and resuming those requests once the
buffer is provided. But the call site that provides a data buffer
(UBLK_IO_NEED_GET_DATA) is separate from those for incoming requests.
So simplify the function by splitting the UBLK_IO_NEED_GET_DATA case
into its own function ublk_get_data(). This avoids several redundant
checks in the UBLK_IO_NEED_GET_DATA case, and streamlines the incoming
request cases.
Don't call ublk_fill_io_cmd() for UBLK_IO_NEED_GET_DATA, as it's no
longer necessary to set io->cmd or the UBLK_IO_FLAG_ACTIVE flag for
ublk_dispatch_req().
Since UBLK_IO_NEED_GET_DATA no longer relies on ublk_dispatch_req()
calling io_uring_cmd_done(), return the UBLK_IO_RES_OK status directly
from the ->uring_cmd() handler. If ublk_start_io() fails, don't complete
the UBLK_IO_NEED_GET_DATA command, matching the existing behavior.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-8-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for calling it from outside ublk_dispatch_req(), factor
out the code responsible for setting up an incoming ublk I/O request.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-7-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
